首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 156 毫秒
1.
采用溶胶凝胶法制备了SiO_2和La_2O_3-SiO_2载体,再通过浸渍法分别引入Rh-La和Rh组分,研究考察了La引入方式对Rh/SiO_2催化CO加氢反应性能的影响。结果表明,La的添加有利于提高Rh的分散度,促进Rh+中心数的增加,有效地抑制产物中CO2的生成,提高含氧化合物选择性。此外,La的引入方式会影响La与Rh间的相互作用强弱,Rh和La共浸渍制得的2Rh-5La_2O_3/SiO_2催化剂中Rh-La相互作用较强,削弱的Rh-CO键有利于反应过程中CO的插入反应,使得产物以C_(2+)含氧化合物为主。而La以助剂形式掺入SiO_2制得的2Rh/5La_2O_3-SiO_2催化剂具有较弱的La-Rh相互作用,其产物则以甲醇、乙醇等低碳醇为主。  相似文献   

2.
采用高压原位FT-IR技术,对比研究了CO加H~2反应条件下Rh/SiO~2和Rh/NaY催化剂表面反应中间物种。在Rh/SiO~2表面上,无论在常压还是在1.0MPa合成气中,只观察到线式和桥式吸附CO。而在常压合成气中,Rh/NaY上不仅存在上述CO吸附物种,而且还有孪生型的Rh(Ⅰ)(CO)~2和少量Rh~6(CO)~1~6;当合成气压力升至1.0MPa后,Rh(Ⅰ)(CO)~2迅速转化成Rh~6(CO)~1~6和在2042cm^-^1产生吸收的单核羰基Rh物种,与此同时催化剂表面还生成了单齿和双齿乙酸根物种;这些在高压下生成的物种在合成气压力重新降回到常压时依然稳定存在。研究Rh/NaY上合成气反应表面物种与H~2的反应行为表明单齿乙酸根很可能是反应的活性中间物。这些结果说明Rh/NaY催化剂在高压合成气中的重构是诱发选择生成乙酸反应的基础。  相似文献   

3.
采用高压原位FT -IR技术 ,对比研究了CO加H2 反应条件下Rh/SiO2 和Rh/NaY催化剂表面反应中间物种 .在Rh/SiO2 表面上 ,无论在常压还是在 1.0MPa合成气中 ,只观察到线式和桥式吸附CO .而在常压合成气中 ,Rh/NaY上不仅存在上述CO吸附物种 ,而且还有孪生型的Rh(I) (CO) 2 和少量Rh6 (CO) 16 ;当合成气压力升至 1.0MPa后 ,Rh(I) (CO) 2 迅速转化成Rh6 (CO) 16 和在 2 0 42cm-1产生吸收的单核羰基Rh物种 ,与此同时催化剂表面还生成了单齿和双齿乙酸根物种 ;这些在高压下生成的物种在合成气压力重新降回到常压时依然稳定存在 .研究Rh/NaY上合成气反应表面物种与H2 的反应行为表明单齿乙酸根很可能是反应的活性中间物 .这些结果说明Rh/NaY催化剂在高压合成气中的重构是诱发选择生成乙酸反应的基础  相似文献   

4.
使用负载型催化剂由合成气制乙醇是一碳化学研究的一个重要发展。本实验室前已报道用化学反应法检验出Rh-Nb_2O_5/SiO_2表面上除了铑位外同时还存在氧化铌位。本文为兰部分工作所组成: (1)进一步用氢还原过的Nb_2O_5/SiO_2催化乙炔聚合成聚乙炔的化学方法推断Rh-Nb_2O_5/SiO_2上可能存在着Nb—H键。(2)用FTIR法检测上述催化剂的红外光谱吸收带, 1740(w) cm~(-1)为V_(Rh-H), 1560 cm~(-1)(broad, m)、1269 cm~(-1)(s)为与Nb—H有关的吸收, 后者可能属于桥式Rh—H—Nb的吸收。(3)XPS检测出合成气处理的Rh-Nb_2O_5/SiO_2表面上存在Rh~0、Rh~Ⅰ、Nb~Ⅴ、Nb~Ⅳ和两种不同的沉积碳。根据这些结果, 提出活性中心可能为A(参见正文图3)简写为B(见图3), CO转化的主要途径是而后C—O还原断裂生成=CH_2***, 再与CO偶联为CH_2=C=O, 最后还原为乙醇或乙醛。根据实验结果对本体系催化剂中SMPI和助催剂作用的实质作了讨论。  相似文献   

5.
本文应用XPS研究了Nb_2O_5/SiO_2(氧化态)、Nb_2O_5/SiO_2(还原态)、Rh/SiO_2(还原态)、Rh-Nb_2O_5/SiO_2(氧化态)、Rh-Nb_2O_5/SiO_2(还原态)、Rh-Nb_2O_5/SiO_2(反应后,氧化态)等一系列样品,比较它们的光电子结合能,证明了Rh-Nb_2O_5-SiO_2有较强的相互作用;Nb_2O_5与SiO_2可能生成表面化合物;Rh通过氢溢出促进了较难还原的表面Nb(Ⅴ)的加氢还原;Rh与SiO_2相互作用并高度分散在载体表面;Nb_2O_5的添加改变了负载Rh的价带结构,抑制了CO在Rh吸附位上的解离,提高了制醇的选择性;由于与Nb_2O_5接触的程度不同,表面存在两类不同化学微环境的Rh。Rh与Nb_2O_5对表面吸附的CO加H的协合化学作用是本体系金属-载体或金属-助催剂强相互作用的实质。  相似文献   

6.
Rh基催化剂上CO加氢制C2含氧化物的原位红外光谱研究   总被引:5,自引:0,他引:5  
 用原位红外光谱考察了Rh-Mn-Li-Fe/SiO2和Rh/SiO2催化剂表面上CO的吸附态及CO加氢反应过程中吸附物种的变化. 结果表明,CO在Rh/SiO2催化剂上仅有线式吸附态存在,而CO在Rh-Mn-Li-Fe/SiO2催化剂上既有线式吸附态存在,又有孪生吸附态存在. 这说明Rh-Mn-Li-Fe/SiO2催化剂中Rh的分散度较高. 经CO加氢反应(3.0 MPa,593 K)后,在Rh-Mn-Li-Fe/SiO2催化剂上可观测到C2含氧化物前驱物种的吸收谱带,而在Rh/SiO2催化剂上未观测到相应的谱带; CO在这两种催化剂上主要以线式吸附态存在,孪生吸附态基本消失. 结合催化剂对CO加氢的催化性能,可以认为线式吸附的CO对生成C2含氧化物有贡献. Rh-Mn-Li-Fe/SiO2催化剂的高活性是由于助剂的存在削弱了其表面吸附CO的 C-O键,促进了CO的活化,从而有利于C2含氧化物前驱物的生成.  相似文献   

7.
制备方法和条件对Rh-Mn-Li-Ti/SiO2催化剂CO加氢制C2含氧化物性能的影响;Rh基催化剂;TiO2助剂;CO;加氢;合成气;C2含氧化合物  相似文献   

8.
催化活性测试表明,助剂Fe具有显著提高乙醇生成选择性及铑催化活性的双重作用;助剂Li具有显著提高乙醇选择性的作用,对铑催化活性影响不大。基于H_2/D_2同位素效应结果及CO化学吸附、IR、XRD、XPS等的表征结果,认为助剂Fe经活化处理后大部分与Rh形成RhFe合金,使Rh分散度显著提高,从而提高了乙醇的选择性;Rh分散度的提高以及小部分以Fe~(2+)(Fe~(3+))形式存在的助剂Fe促进甲酰基的生成及随后的氢解断C-O键反应是助剂Fe促使铑催化活性提高的两个因素。Li的主要作用在于通过与C_2含氧中间体乙烯酮氧端的弱亲合作用,促进了乙醇前驱体的生成,从而使乙醇生成选择性提高。  相似文献   

9.
烯烃氢甲酰化反应产物醛是生产多种有机化合物的重要中间体,具有重要的工业价值.均相催化剂具有反应条件温和及催化效率高的优点,因而成为工业应用的主要催化体系,但催化剂分离复杂且昂贵.多相催化剂具有易分离和易回收的优点,但在氢甲酰化反应中的活性和选择性较低,因而大大阻碍了其在工业上的应用.为了得到兼具两种催化剂优点的新型催化剂,人们进行了数十年的研究,均相催化剂多相化便是其中一个研究热点.实现该策略最常用的一个方法是将均相催化剂固载到载体上,以此来达到催化剂易从反应物及产物中分离,同时保有高活性高选择性的目的.通过化学键将金属配合物的配体键合到载体上已经取得了一定的成功,但依然存在着活性组分流失和催化剂失活的问题.本课题组开发了一种锚合膦配体修饰的Rh/SiO_2新型催化剂,在乙烯氢甲酰化反应中表现出卓越的稳定性,反应1000 h后依然没有出现活性下降和组分流失的现象,这是因为配体和活性金属同时被固载在载体SiO_2上.但是由于配体和活性金属都不能自由移动,很多配体不能与金属原子有效接触,起不到配位效应,因而催化剂活性仍不够高.因此,为了提高锚合膦配体修饰的Rh/SiO_2催化剂的活性,我们合成了具有较长链长的膦DPPPTS,并与商业购买的链长较短的膦DPPETS做对比,研究锚合膦配体链长和催化剂活性的关系.使用N_2物理吸附、原位红外光谱(FT-IR)和固体~(31)P核磁共振(NMR)等探讨了膦配体链长影响催化性能的原因.固定床上乙烯氢甲酰化反应结果表明,当膦配体的链长增长一个亚甲基长度后,反应稳定后催化剂的活性提高了一倍以上.N_2物理吸附实验表明,延长配体的链长对催化剂结构性质的影响不大,因而也不会改变反应时的传质.催化剂吸附合成气(CO:H_2=1:1)的原位FT-IR结果表明,不同链长膦配体修饰的Rh/SiO_2催化剂上均原位生成了类似于用于均相氢甲酰化反应的Wilkinson型催化剂的活性物种HRh(CO)_2(DPPPTS)_2[或HRh(CO)_2(DPPETS)_2],以及吸附在Rh上的线式CO.这两种吸附物种均利于氢甲酰化反应的进行,其中以前者活性更好.从原位FT-IR结果同样看出,锚合链长较长的膦配体的催化剂(DPPPTS-Rh/SiO_2)上原位生成的活性物种量更多,因而催化活性更高.固体~(31)P NMR结果表明,催化剂上的膦以自由态的膦(高场峰β)和与Rh配位的膦(低场峰α)两种形式存在.α峰面积和β峰面积之比(r)越高代表与Rh配位的膦配体占总膦量的比例越高.发现DPPPTS-Rh/SiO_2催化剂的r值(1.31)高于DPPETS-Rh/SiO_2催化剂(1.05),即前者与Rh配位生成活性物种的膦配体的比例更高.结合原位FT-IR和固体~(31)P NMR的结果可知,链长较长的DPPPTS更容易与Rh配位,从而生成更多的铑膦配合物活性物种,因而催化剂活性更高.因此,增长锚合膦配体的链长有助于提高其修饰的Rh/SiO_2催化剂的活性.  相似文献   

10.
用Gaussian98程序、HF方法和LANL2DZ基组,以MCOM1^n (M=Ru,Rh,Pd;M1^n =Na^ ,Mg^2 ,K^ )为模型,探讨在主族金属阳离子助剂M1^n 作用下,过渡金属催化剂M化学吸附CO后对C-O锓的影响及其机理,并进一步推测最终对CO氢化反应产物的影响。结果表明,主族金属阳离子助剂M1^n 以不同方式与MCO相作用及选用不同的助剂作用时,催化剂具有不同的催化活性和选择性,且对C-O键的削弱程度不同,导致生成不同的产物。当主族金属阳离子助剂M1^n 与CO中的O作用时,C-O键被削弱程度比无助剂时大,更有利于生成烃类化合物;当与过渡金属M作用时,C-O键被削弱程度减小,有利于含氧化合物的生成;当助剂与CO以侧基作用时,无助催化活性;当用不同的主族金属阳离子作助剂时,C-O键被削弱程度也不同,得电子能力强的主族金属阳离子助剂有更强的更强的助催化作用。  相似文献   

11.
Criegee中间体气相反应热力学的G2理论计算   总被引:1,自引:0,他引:1  
Criegee intermediate is believed to play an important role in the atmospheric chemistry. Because of its short life and the difficulty in experimental study, we carried out ah initio calculations on the thermochemistry of the Criegee involving reactions in this study. Thermochemistry data of reaction enthalpies and Gibbs free energies for four different stable structures of the Criegee intermediates (singlet CH2OO ①1 A1 in C2v, triplet CH2OO ②3B1 in C2v, singlet CH2OO ③1A' in Cs and triplet CH2OO ④ in C1 symmetry) involved in some of the gas-phase reactions were calculated at the standard Gaussian-2 [G2(MP2) and G2] and a modified G2, G2(fu1)[10],levels of theory. Relative energies among those Criegees and formic acid were compared. Chemical reactions include the formation of Criegees, re-arrangement from Criegee to formic acid, dissociations (producing CH2(3B1)+O2, CH2(1A1)+O2, CO2+H2, CO2+2H, CO+H2O, OH+HCO) and the reactions between Criegee and NO/H2O. Standard equilibrium constants for some reactions were investigated and may be obtained for all of the rest reactions involved in this study by the standard Gibbs free energies. It is shown that the formation of Criegee ①-④ by ethylene and ozone, the re-arrangement from any Criegee to formic acid, the dissociation in producing CO2+O2and CO+H2O and the reactions between any Criegee and NO/H2O are all favourable thermodynamicaly. The dissociation in forming CO2+2H and OH+HCO is less favourable. While the dissociation in forming carbene (either in 3B1 or 1A1 state) is not allowed by ΔrGm? values. Standard enthalpies of formation at 298 K for the four Criegees were predicted at the G2(ful) level of theory. Each value is the average value from ten of the above reactions and they are -4.3, 74.8,98.9 and 244.6 kJ mol-1 at the G2(ful) level for Criegee ① to Criegee ④, respectively. In addition, tile standard enthalpy of formation at 298 K for HOCH2OOH is further predicted to be -315.6 kJ mol-1 at the G2(MP2) level.  相似文献   

12.
Accurate quantum-mechanical results for thermodynamic data, cumulative reaction probabilities (for J = 0), thermal rate constants, and kinetic isotope effects for the three isotopic reactions H2 + CH3 --> CH4 + H, HD + CH3 --> CH4 + D, and D2 + CH3 --> CH(3)D + D are presented. The calculations are performed using flux correlation functions and the multiconfigurational time-dependent Hartree (MCTDH) method to propagate wave packets employing a Shephard interpolated potential energy surface based on high-level ab initio calculations. The calculated exothermicity for the H2 + CH3 --> CH4 + H reaction agrees to within 0.2 kcal/mol with experimentally deduced values. For the H2 + CH3 --> CH4 + H and D2 + CH3 --> CH(3)D + D reactions, experimental rate constants from several groups are available. In comparing to these, we typically find agreement to within a factor of 2 or better. The kinetic isotope effect for the rate of the H2 + CH3 --> CH4 + H reaction compared to those for the HD + CH3 --> CH4 + D and D2 + CH3 --> CH(3)D + D reactions agree with experimental results to within 25% for all data points. Transition state theory is found to predict the kinetic isotope effect accurately when the mass of the transferred atom is unchanged. On the other hand, if the mass of the transferred atom differs between the isotopic reactions, transition state theory fails in the low-temperature regime (T < 400 K), due to the neglect of the tunneling effect.  相似文献   

13.
The pyrolyses of the guaiacols or methoxyphenols (o-, m-, and p-HOC(6)H(4)OCH(3)) have been studied using a heated SiC microtubular (μ-tubular) reactor. The decomposition products are detected by both photoionization time-of-flight mass spectroscopy (PIMS) and matrix isolation infrared spectroscopy (IR). Gas exiting the heated SiC μ-tubular reactor is subject to a free expansion after a residence time of approximately 50-100 μs. The PIMS reveals that, for all three guaiacols, the initial decomposition step is loss of methyl radical: HOC(6)H(4)OCH(3) → HOC(6)H(4)O + CH(3). Decarbonylation of the HOC(6)H(4)O radical produces the hydroxycyclopentadienyl radical, C(5)H(4)OH. As the temperature of the μ-tubular reactor is raised to 1275 K, the C(5)H(4)OH radical loses a H atom to produce cyclopentadienone, C(5)H(4)═O. Loss of CO from cyclopentadienone leads to the final products, acetylene and vinylacetylene: C(5)H(4)═O → [CO + 2 HC≡CH] or [CO + HC≡C-CH═CH(2)]. The formation of C(5)H(4)═O, HCCH, and CH(2)CHCCH is confirmed with IR spectroscopy. In separate studies of the (1 + 1) resonance-enhanced multiphoton ionization (REMPI) spectra, we observe the presence of C(6)H(5)OH in the molecular beam: C(6)H(5)OH + λ(275.1?nm) → [C(6)H(5)OH ?] + λ(275.1nm) → C(6)H(5)OH(+). From the REMPI and PIMS signals and previous work on methoxybenzene, we suggest that phenol results from a radical/radical reaction: CH(3) + C(5)H(4)OH → [CH(3)-C(5)H(4)OH]* → C(6)H(5)OH + 2H.  相似文献   

14.
The O((1)D) + C(3)H(8) reaction has been reinvestigated using the universal crossed molecular beam method. Three reaction channels, CH(3) + C(2)H(4)OH, C(2)H(5) + CH(2)OH, and OH + C(3)H(7), have been observed. All three channels are significant in the title reaction with the C(2)H(5) formation process to be the most important, while the CH(3) formation and the OH formation channels are about equal. Product kinetic energy distributions and angular distributions have been determined for the three reaction channels observed. The oxygen-containing radicals in the CH(3) and C(2)H(5) formation pathways show forward-backward symmetric angular distribution relative to the O atom beam, while the OH product shows a clearly forward angular distribution. These results indicate that the OH formation channel seems to exhibit different dynamics from the CH(3) and C(2)H(5) channels.  相似文献   

15.
Ligand substitution of RuCl2[P(C6H5)3]3 and Cp*RuCl(isoprene) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl) complexes with hydroxymethylphosphines was investigated to develop new catalyst systems for CO2 hydrogenation. A reaction of P(C6H5)2CH2OH with RuCl2[P(C6H5)3]3 in CH2Cl2 gave Ru(H)Cl(CO)[P(C6H5)2CH2OH]3 (1), which was characterized by NMR spectroscopy and X-ray crystallographic analysis. An isotope labeling experiment using P(C6H5)213CH2OH indicated that the carbonyl moiety in complex 1 originated from formaldehyde formed by degradation of the hydroxymethylphosphine. Elimination of formaldehyde from PCy2CH2OH (Cy=cyclohexyl) was also promoted by treatment of RuCl2[P(C6H5)3]3 in ethanol to give RuCl2(PHCy2)4 under mild conditions. On the other hand, the substitution reaction using Cp*RuCl(isoprene) with the hydroxymethylphosphine ligands proceeded smoothly with formation of Cp*RuCl(L)2 [2a-2c; L=P(C6H5)2CH2OH, PCy(CH2OH)2, and P(CH2OH)3] in good yields. The isolable hydroxymethylphosphine complexes 1 and 2 efficiently catalyzed the hydrogenative amidation of supercritical carbon dioxide (scCO2) to N,N-dimethylformamide (DMF).  相似文献   

16.
Rate constants for the reactions of OH radicals and NO3 radicals with dimethyl phosphonate [DMHP, (CH3O)2P(O)H], dimethyl methylphosphonate [DMMP, (CH3O)2P(O)CH3], and dimethyl ethylphosphonate [DMEP, (CH3O)2P(O)C2H5] have been measured at 296 +/- 2 K and atmospheric pressure using relative rate methods. The rate constants obtained for the OH radical reactions (in units of 10(-12) cm3 molecule(-1) s(-1)) were as follows: DMHP, 4.83 +/- 0.25; DMMP, 10.4 +/- 0.6; and DMEP, 17.0 +/- 1.0, with a deuterium isotope effect of k(OH + DMMP)/k(OH + DMMP-d9) = 4.8 +/- 1.2. The rate constants obtained for the NO3 radical reactions (in units of 10(-16) cm3 molecule(-1) s(-1)) were as follows: DMHP, < 1.4; DMMP, 2.0 +/- 1.0; and DMEP, 3.4 +/- 1.4. Upper limits to the rate constants for the O3 reactions of < 8 x 10(-20) cm3 molecule(-1) s(-1) for DMHP and < 6 x 10(-20) cm3 molecule(-1) s(-1) for DMMP and DMEP were determined. Products of the reactions of OH radicals with DMHP, DMMP, and DMEP were investigated in situ using atmospheric pressure ionization mass spectrometry (API-MS) and, for the DMMP and DMEP reactions, Fourier transform infrared (FT-IR) spectroscopy. API-MS analyses showed the formation of products of molecular weight 96 and 126, attributed to CH3OP(O)(H)OH and (CH3O)2P(O)OH, respectively, from DMHP; of molecular weight 110, attributed to CH3OP(O)(CH3)OH, from DMMP; and of molecular weight 124 and 126, attributed to CH3OP(O)(C2H5)OH and (CH3O)2P(O)OH, respectively, from DMEP. FT-IR analyses showed formation (values given are % molar yields) of the following: from DMMP, CO, 54 +/- 6; CO2, 5 +/- 1 in dry air; HCHO, 3.9 +/- 0.7; HC(O)OH, < 1.4 in dry air; RONO2, approximately 4; and formate ester, approximately 8; and from DMEP, CO, 50 +/- 7; CO2, 11 +/- 4; CH3CHO, 18 +/- 8; HCHO, < 7; HC(O)OH, < 6; RONO2, < or = 5; and formate ester, 5.0 +/- 1.5. Possible reaction mechanisms are discussed.  相似文献   

17.
A new group of CO-releasing molecules, CO-RMs, based on cyclopentadienyl iron carbonyls have been identified. X-Ray structures have been determined for [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)X], X = Cl, Br, I, NO(3), CO(2)Me, [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)](2), [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(2)](2) and [(eta-C(5)H(4)CO(2)Me)Fe(CO)(3)][FeCl(4)]. Half-lives for CO release, (1)H, (13)C, and (17)OC NMR and IR spectra have been determined along with some biological data for these compounds, [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(3)](+) and [[eta-C(5)H(4)(CH(2))(n)CO(2)Me]Fe(CO)(3)](+), n = 1, 2. More specifically, cytotoxicity assays and inhibition of nitrite formation in stimulated RAW264.7 macrophages are reported for most of the compounds analyzed. [(eta-C(5)H(5))Fe(CO)(2)X], X = Cl, Br, I, were also examined for comparison. Correlations between the half-lives for CO release and spectroscopic parameters are found within each group of compounds, but not between the groups.  相似文献   

18.
Kinetics of the ethynyl (C(2)H) radical reactions with H(2), D(2), CH(4) and CD(4) was studied over the temperature range of 295-396 K by a pulsed laser photolysis/chemiluminescence technique. The C(2)H radicals were generated by ArF excimer-laser photolysis of C(2)H(2) or CF(3)C(2)H and were monitored by the chemiluminescence of CH(A(2)Δ) produced by their reaction with O(2) or O((3)P). The measured absolute rate constants for H(2) and CH(4) agreed well with the available literature data. The primary kinetic isotope effects (KIEs) were determined to be k(H(2))/k(D(2)) = 2.48 ± 0.14 and k(CH(4))/k(CD(4)) = 2.45 ± 0.16 at room temperature. Both of the KIEs increased as the temperature was lowered. The KIEs were analyzed by using the variational transition state theory with semiclassical small-curvature tunneling corrections. With anharmonic corrections on the loose transitional vibrational modes of the transition states, the theoretical predictions satisfactorily reproduced the experimental KIEs for both C(2)H + H(2)(D(2)) and C(2)H + CH(4)(CD(4)) reactions.  相似文献   

19.
Density functional theory (DFT) calculations are carried out to investigate partial oxidation of propylene over neutral VO 3 clusters. C=C bond cleavage products CH 3CHO + VO 2CH 2 and HCHO + VO 2CHCH 3 can be formed overall barrierlessly from the reaction of propylene with VO 3 at room temperature. Formation of hydrogen transfer products H 2O + VO 2C 3H 4, CH 2=CHCHO + VO 2H 2, CH 3CH 2CHO + VO 2, and (CH 3) 2CO + VO 2 is subject to tiny (0.01 eV) or small (0.06 eV, 0.19 eV) overall free energy barriers, although their formation is thermodynamically more favorable than the formation of C=C bond cleavage products. These DFT results are in agreement with recent experimental observations. VO 3 regeneration processes at room temperature are also investigated through reaction of O 2 with the CC bond cleavage products VO 2CH 2 and VO 2CHCH 3. The following barrierless reaction channels are identified: VO 2CH 2 + O 2 --> VO 3 + CH 2O; VO 2CH 2 + O 2 --> VO 3C + H 2O, VO 3C + O 2 --> VO 3 + CO 2; VO 2CHCH 3 + O 2 --> VO 3 + CH 3CHO; and VO 2CHCH 3 + O 2 --> VO 3C + CH 3OH, VO 3C + O 2 --> VO 3 + CO 2. The kinetically most favorable reaction products are CH 3CHO, H 2O, and CO 2 in the gas phase model catalytic cycles. The results parallel similar behavior in the selective oxidation of propylene over condensed phase V 2O 5/SiO 2 catalysts.  相似文献   

20.
CO(2) reforming of CH(4) on Ni(111) was investigated by using density functional theory. On the basis of thermodynamic analyses, the first step is CH(4) sequential dissociation into surface CH (CH(4) --> CH(3) --> CH(2) --> CH) and hydrogen, and CO(2) dissociation into surface CO and O (CO(2) --> CO + O). The second step is CH oxygenation into CHO (CH + O --> CHO), which is more favored than dissociation into C and hydrogen (CH --> C + H). The third step is the dissociation of CHO into surface CO and H (CHO --> CO + H). This can explain the enhanced selectivity toward the formation of CO and H(2) on Ni catalysts. It is found that surface carbon formation by the Bouduard back reaction (2CO = C((ads)) + CO(2)) is more favored than by CH(4) sequential dehydrogenation. The major problem of CO(2) reforming of CH(4) is the very strong CO adsorption on Ni(111), which results in the accumulation of CO on the surface and hinders the subsequent reactions and promotes carbon deposition. Therefore, promoting CO desorption should maintain the reactivity and stability of Ni catalysts. The computed energy barriers of the most favorable elementary reaction identify the CH(4) activation into CH(3) and H as the rate-determining step of CO(2) reforming of CH(4) on Ni(111), in agreement with the isotopic experimental results.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号