Preface to the Special Issue of the International Symposium on Single-Atom Catalysis (ISSAC-2016)

Catalysis is one of the most important chemical processes for production of goods and for environmental remediation. Almost 80％ of chemical manufacturing involves either heterogeneous or homogeneous catalysts, mostly consisting of expensive noble metals. Designing highly active, selective and stable catalysts with most efficient use of rare and expensive metals becomes Grand Challenge of heterogeneous catalysis and is critical to the sustainable development of our planet.     

A New Indicator Reaction and Its Application-Catalytic Determination of Ultratrace Amounts of Rhodium with Linear Sweep Voltammetry

Introduction Sensitive linear sweep voltammetry to have been applied to the catalytic kinetic analysis may be helpful for the application of some organic reagents to the analysis of inorganic ones by voltammetry, The catalytic reaction-linear sweep voltammetric method for the determination of noble metals, such as Ag, Os, Ru and Ir has been developed, but no report about the method for the determination of rhodium has been published so far.     

单原子催化国际研讨会专刊前言（英文）

<正>Catalysis is one of the most important chemical processes for production of goods and for environmental remediation.Almost 80%of chemical manufacturing involves either heterogeneous or homogeneous catalysts,mostly consisting of expensive noble metals.Designing highly active,selective and stable catalysts with most efficient use of rare and expensive metals becomes Grand Challenge of heterogeneous catalysis and is critical to the sustainable development of our planet.Sir Hugh Stott Taylor in 1925 proposed the concept of active centers on solid surfaces.The active centers of homogeneous     

Syntheses and characterization of the noble-metal substituted heptadecatungstodiarsenates

Four Dawson type heteropolyoxotungstates substituted by noble metals with the general formula (TBA)n[As2W17M(OH2)O61], where M=PdII, RuIII, IrIV and PtIV, are prepared by filling the vacant site of the lacunary precursor a2-K10As2W17O61. UV-vis and IR spectra are similar to the other transition metal substituted Dawson type tungstodiarsenates. EPR result provides direct evidence to identify the presence of noble metal cation. Electrochemical behavior investigated by cyclic voltammetry in acetonitrile displays four reversible one-electron redox couples attributed to the W(VI-V) process of tungsten-oxo framework.     

Synthesis and Crystal Structure of cis-[1,2-Bis(phenyl-thiomethyl)benzene]dichloroplatinum(Ⅱ)·0.5acetonitrile

1 INTRODUCTION The coordination chemistry of bithioethers with noble metal ions has received considerable attention for a very long time due to their appli- cations in extracting noble metals. A number of Pt(Ⅱ) complexes with such ligands have been reported[1～7], among which some crystal structures have been determined[4～7]. However, most of these structures are Pt(Ⅱ) complexes of a few bithioether ligands with flexible alkyl spacers, RS(CH2)nSR. To our knowledge, the crystal str…     

Studies on State and Structure of Noble Metals in Electrocatalyst Made by Coprecipitation Method

The electrocatalysts of Pt/C,PtRu/C and Ru/C were prepared by the impregnation method.The facet characterization.The dispersion and the particle size for the catalysts were determined by means of X-ray diffraction and transmission electron microscopy,X-ray photoelectron spectroscopy was also used to analyze the state and the valency of the noble metals.The results show that the particle size was in nanometer range and the binary metals have come into being an alloy.The platinum in the catalysts existed in zero valency.The valency of the ruthenium on the surface is different from that in the body,while the ruthenium on the surface existed in oxide-form.PtRu/C and Pt/C are of good activity of the electrooxidation of hydrogen except Ru/C.PtRu/C is more tolerant of CO than Pt/C,and CO is only adsorbed on Pt.     

Molecular uniting set identified characteristic (MUSIC): a promising strategy for purely organic RTP luminogens

正The room temperature phosphorescences(RTP)are of growing interest owing to their promising applications in material science and bioimaging.To date,the lumiogens showing persistent RTP effect mainly contain the noble metals which have the shortcomings such as high cost,potential toxicity.The exploration of metal free luminogens,i.e.,purely organic RTP luminogens,is thus of great importance for the community.The organic RTP materials could be created by means of cocrystals,and recently it is     

Crystal Structure and Characterization of Bis(4-isoniazidylthioformyl) Disulfide Hydration Sodium Coordination Polymer:n[(4-Pyridyl-CONHNCS_2)_2~(2-)]·[Na_2(H_2O)_8~(2 )]_n

1 INTRODUCTION Sodium dithiocarbamate is an important industrial reagent, which has been used in many fields[1, 2], such as transition metal extractant[3, 4], floating che- micals of noble metals and efficient toxicide of cadmium poisoning[5]. At present, sodium dithio- carbamates are mainly prepared by the reaction of carbon disulphide with nucleophilic reagents con- taining secondary amine[6, 7]. In the reaction of carbon disulphide with isoniazide, we failed to ob- tain the object compo…     

Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper

1 INTRODUCTION Silver and its compounds have received much attention due to their current and potential applica- tions in many areas[1, 2]. As a metal with the highest electrical and thermal conductivities, silver was one of the most important noble metals used in electrical industries in the last century. Several decades ago, however, the development of silver application in electronic area seemed not so quick. The fear for some undesirable phenomena involving silver, like “electrochemi…     

Catalysis by Using TiO_2 Nanoparticles and Nanotubes

TiO2 has attracted considerable attention due to its stability, non-toxicity, low cost, and great potential for use as a photocatalyst in environmental applications. Since strong metal-support interaction (SMSI) of titania-supported noble metals was first reported in 1978, titania supported catalyst has been intensively studied in heterogeneous catalysis. However, the effective catalytic activity was restricted due to the low surface area of TiO2. Recently, TiO2-based nanotubes were extens…     

Surface Atomic Regulation of Core–Shell Noble Metal Catalysts

Core–shell noble metal catalysts have gained significant attention in the past few decades, as they not only reduce the use of noble metals effectively but also exhibit unique properties derived from the synergistic effect between core and shell metals. In particular, regulating the surface structure of shells to maximize the atomic utilization efficiency of noble metals is critically important. Controlling the shell thickness of noble metal catalysts at the atomic level as an efficient approach to realize this goal has been attracting growing attention; this approach involves the formation of ultrathin shells (typically 2–6 atomic layers), monolayers, or even atomically dispersed noble metals embedded in the host metal. These strategies drive the core/support metals to improve the number of active sites and the intrinsic activity of the deposited noble metals remarkably, meanwhile minimizing the usage of noble metals. Herein, recent advances regarding atomic control of the core–shell noble metal catalysts is reviewed, with focus on the surface regulation. First, synthesis methods and surface structures are summarized, and then catalytic applications of these architectures are highlighted.     

Trends in sorption preconcentration combined with noble metal determination.

Nowadays much attention is being paid to the determination of trace amounts of noble metals in geological, industrial, biological and environmental samples. The most promising techniques, such as inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (ETAAS) are characterized by high sensitivity. However, the accurate determination of trace noble metals has been limited by numerous interferences generated from the presence of matrix elements. To decrease, or eliminate, these interferences, the sorption preconcentration of noble metals is often used prior to their instrumental detection. A great number of hyphenated methods of noble metal determination using sorption preconcentration have been developed. This review describes the basic types of available sorbents, preconcentration procedures and preparations of the sorbent to the subsequent determination of noble metals. The specific features of instrumental techniques and examples of ETAAS, FAAS, ICP-AES, ICP-MS determinations after the sorption preconcentration of noble metals are considered. The references cited here were selected mostly from the period 1996 - 2006.     

贵金属在Ag_2S纳米颗粒中由内向外的迁移现象

纳米颗粒具有明显区别于块体材料的新奇特性,本文利用透射电镜观察,描述并讨论一种发生在贵金属(Au、Ag、Pd和Pt)和硫化银(Ag_2S)构成的核壳结构纳米颗粒中的有趣现象,即贵金属在Ag_2S纳米颗粒中由内向外的迁移。迁移可在室温下进行,其最终结果使最初的核壳结构颗粒演变成由贵金属和Ag_2S构成的异质纳米二聚体结构,如Au-Ag_2S、Ag-Ag_2S、PdAg_2S和Pt-Ag_2S。电镜表征表面实验条件下贵金属在Ag_2S的迁移类似于一种整体迁移的模式且迁移过程中伴随着颗粒形貌结构的演变。贵金属在Ag_2S中的经空位互换的扩散机制或半导体纳米颗粒的自纯化机制可以用来解释这种迁移现象。     

A critical review of neutron activation and tracer methods for the determination of the noble metals

Neutron activation methods for the seven noble metals are critically reviewed up to December, 1965. The methods deal with the determination of trace impurities in each noble metal as well as traces of noble metals in media such as organic material, fission product and other solutions, ores, alloys, minerals, silica and base metals. The need for confirmatory evidence in the case of such complex materials as ores is emphasized.     

贵金属组试剂聚硫醚吸附性能和应用的研究

我们合成了类似文献报道的聚硫醚(PTE)。通过各种性能实验,确定了试剂结构为HO CH_2—S CH_2OH,对Au、Pd、Pt、Rh、Ir、Ru、Os的吸附率在98％以上,且不吸附常见的非贵金属。分离富集效果优于文献。像PTE能吸附全部8个贵金属且饱和吸附容量非常大的吸着剂,尚属少见。     

Improved recovery of trace amounts of gold (III), palladium (II) and platinum (IV) from large amounts of associated base metals using anion-exchange resins

The adsorption and desorption behaviors of gold (III), palladium (II) and platinum (IV) were surveyed in column chromatographic systems consisting of one of the conventional anion-exchange resins of large ion-exchange capacity and dilute thiourea solutions. The noble metals were strongly adsorbed on the anion-exchange resins from dilute hydrochloric acid, while most base metals did not show any marked adsorbability. These facts made it possible to separate the noble metals from a large quantity of base metals such as Ag (I), Al (III), Co (II), Cu (II), Fe (III), Mn (II), Ni (II), Pb (II), and Zn (II). Although it used to be very difficult to desorb the noble metals from the resins used, the difficulty was easily overcome by use of dilute thiourea solutions as an eluant. In the present study, as little as 1.00 microg of the respective noble metals was quantitatively separated and recovered from as much as ca. 10 mg of a number of metals on a small column by elution with a small amount of dilute thiourea solution. The present systems should be applicable to the separation, concentration and recovery of traces of the noble metals from a number of base metals coexisting in a more extended range of amounts and ratios.     

Sorption preconcentration in combined methods for the determination of noble metals

Combined methods for the determination of noble metals with the use of sorption preconcentration with complexing, anion-exchange, and other sorbents are reviewed. Characteristics of sorbents, techniques of sorption preconcentration, and techniques for the preparation of a concentrate for determination are considered. Features of instrumental methods for the determination of noble metals in the analysis of different materials are discussed. Examples of the use of sorption preconcentration in combined methods for the determination of noble metals are given from publications between 1996–2005.     

Improved recovery of trace amounts of gold (III), palladium (II) and platinum (IV) from large amounts of associated base metals using anion-exchange resins

The adsorption and desorption behaviors of gold (III), palladium (II) and platinum (IV) were surveyed in column chromatographic systems consisting of one of the conventional anion-exchange resins of large ion-exchange capacity and dilute thiourea solutions. The noble metals were strongly adsorbed on the anion-exchange resins from dilute hydrochloric acid, while most base metals did not show any marked adsorbability. These facts made it possible to separate the noble metals from a large quantity of base metals such as Ag (I), Al (III), Co (II), Cu (II), ¶Fe (III), Mn (II), Ni (II), Pb (II), and Zn (II). Although it used to be very difficult to desorb the noble metals from the resins used, the difficulty was easily overcome by use of dilute thiourea solutions as an eluant. In the present study, as little as 1.00 μg of the respective noble metals was quantitatively separated and recovered from as much as ca. 10 mg of a number of metals on a small column by elution with a small amount of dilute thiourea solution. The present systems should be applicable to the separation, concentration and recovery of traces of the noble metals from a number of base metals coexisting in a more extended range of amounts and ratios.     

The determination of all the platinum group elements and gold in rocks and ore by neutron activation analysis after preconcentration by a nickel sulphide fire-assay technique on large samples

The noble metals are inhomogeneously distributed in sulphide ores and their host rocks. It is therefore necessary to analyse large sample sizes to obtain representative analyses. A nickel sulphide fire assay technique has been adapted to extract the noble metals from a large sample size (50 g) into a nickel sulphide button. Subsequently the fire assay button is dissolved in hydrochloric acid and the solution is filtered. The noble metal residue retained on the filter paper is analysed quantitatively by i.n.a.a. techniques. This method is rapid, relatively inexpensive and has better sensitivities for all the noble metals than other analytical techniques.     

Surface and subsurface examination of graphite tubes after electrodeposition of noble metals for electrothermal atomic absorption spectrometry

The modification phenomena of noble metals (Pd, Ir, Rh) electrodeposited onto the inner surface of pyrolytic graphite (PG) coated furnaces were investigated mainly by electron microprobe analysis with energy dispersive X-ray emission detection. The conditions of electrodeposition were optimized in order to achieve the best analytical performance of atomic absorption measurements. Investigations concerning the distribution of noble metals on the tube surface and in-depth were performed at different stages of the tube history. It was found that the noble metals used for the modification do not form a compact layer on the surface but penetrate into the pyrolytic graphite structure already at the deposition step. When two metals were deposited together, both penetrated into the graphite structure. The degree of penetration of the pyrolytic graphite at high temperature differs for various metals. It was also demonstrated that electrodeposited noble metals remain in sub-surface domains of the graphite for hundreds of atomization cycles, which means that they can be used as permanent modifiers.