大黄素分子印迹整体柱的合成及性能表征

以大黄素分子为模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和十二醇为混合致孔剂,用原位聚合法合成了一系列分子印迹整体柱,并考察了模板分子在不同条件下合成的印迹聚合物及参考聚合物上保留因子的变化规律.在优化的合成条件下制得的分子印迹整体柱能有效地分离大黄素及其类似物.对分子印迹聚合物及参比聚合物的孔度分析数据表明:分子印迹聚合物中具有两种不同的孔度分布,而参比聚合物中只有一种.     

反相气相色谱研究金属离子中介甲醛印迹聚合物的气相识别

采用配位聚合法制备了Co2+中介的甲醛印迹聚合物,用红外光谱和扫描电镜研究了分子印迹聚合物的表面结构。以甲醛印迹聚合物作为气相色谱固定相,采用反相气相色谱技术研究了印迹材料对模板及其结构相似物的选择保留性能、等温吸附及吸附热力学,并探讨了分子印迹聚合物对室内空气中甲醛的脱除效果。结果表明,在相同色谱条件下,分子印迹柱对模板分子的容量因子均远高于乙醛。较低柱温和较低载气流速有利于印迹材料对气态模板分子的选择保留,当柱温为90℃,载气流速7.0 mL/min,进样体积为3.0μL时,分子印迹柱对模板的容量因子高达61.1,对模板及结构类似物的分离因子达到10.66。模板分子在印迹聚合物柱上的气相吸附等温线呈近似线性,而结构类似物乙醛的吸附等温线符合BET吸附的Ⅲ类模型。分子印迹聚合物对室内空气中的甲醛也具有一定的脱除能力。     

绿原酸印迹均匀微球的制备及其色谱行为研究

以绿原酸为模板,甲基丙烯酸为功能单体,二乙烯基苯为交联剂,采用沉淀聚合法制备了绿原酸印迹均匀微球。探讨了模板及功能单体类型和用量对聚合物颗粒均匀性的影响,考察了流动相组成及柱温对分子印迹柱色谱保留和选择性的影响。绿原酸均匀印迹微球的制备条件为：模板-功能单体-交联剂的用量比为0.375:1.5:7.0,摇瓶转速为15r/min时,微球直径约2.5μm,聚合物收率为35.4%。流动相组成及含水量对印迹聚合物的保留行为影响较大,当用乙腈-水混合物为流动相时,含水量增加,各化合物在印迹色谱柱上的容量因子降低：当流动相含水量高于2.5%,分子印迹聚合物失去选择识别能力;但以0.002mol L_-1磷酸缓冲液(pH3.0)-乙腈混合液为流动相时,分子印迹柱对模板的容量因子、选择性及色谱峰形都有较大改进。当二者体积比为19:1,容量因子高达90.69,其选择性相对于没食子酸和原儿茶酸高达23.10和6.562。温度影响分子印迹聚合物的选择保留能力,当温度从25℃提高到45℃时,印迹聚合物对模板的容量因子从3.52降低到2.41,选择因子降低约30%。     

2,4-二氯苯氧乙酸分子印迹整体柱的制备、表征及色谱性能研究

以2,4-二氯苯氧乙酸分子为模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和十二醇为混合致孔剂,采用热引发原位聚合法制备了作为高效液相色谱固定相的分子印迹整体柱.用红外光谱、扫描电镜、比表面积分析法对聚合物进行了表征.考察了模板分子在不同条件下合成的印迹整体柱及空白整体柱上容量因子的变化规律,同时探讨了流动相中甲醇的体积分数、pH值、流速对印迹整体柱分离性能的影响.结果表明,在优化的合成条件下制备的分子印迹整体柱可在15 min内分离2,4-二氯苯氧乙酸及其类似物苯氧乙酸,分离度为1.52.对柑桔提取液进行了分离测试,结果满意.     

电色谱模式下四肽印迹整体柱分子识别机理的研究

本文采用原位聚合法制备了以四肽YPLG为模板的毛细管分子印迹整体柱,在毛细管电色谱模式下以模板分子和它的结构类似物YPGL为样品,对分子印迹聚合物的识别机理进行了研究。这两种四肽由于化学结构相似且等电点非常相近,普通的电色谱和毛细管电泳方法分离非常困难。但我们的实验表明,印迹整体柱对模板分子具有特异性识别能力,因此YPLG与YPGL之间的分离因子为1.73,分离度达3.72。实验中系统地研究了流动相中有机溶剂的含量、缓冲溶液的pH值、缓冲溶液的盐浓度以及柱温对四肽识别的影响。实验中我们观察到模板在印迹柱上具有非线性的Van’t Hoff行为,揭示可能存在多重保留机理。本研究结果表明,在毛细管电色谱模式下,分子印迹整体柱的分子识别主要决定于样品与印迹聚合物之间的氢键作用以及印迹孔穴的三维结构。     

联二萘酚印迹的电色谱整体柱的制备

讨论了分子印迹毛细管电色谱整体柱的制备.联二蔡酚作为印迹分子在热引发条件下聚合,其中甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯和异辛烷为致孔剂.考察了聚合参数对整体柱通透性及手性分离的影响.联二萘酚对映体在印迹整体柱上得到了基线分离,Rs值可达1.8.     

流动注射-化学发光分子印迹技术测定敌百虫

采用分子印迹技术,以甲基丙烯酸为聚合物基体,敌百虫为模板分子,制备在空间结构和结合位点上与敌百虫匹配的分子印迹聚合物,采用扫描电镜进行形貌的表征.研究该聚合物的结合特性,测定分子印迹聚合物对敌百虫的吸附和选择识别能力,将分子印迹聚合物制备成柱,利用KMnO4、HCl化学发光体系,建立了测定敌百虫的高选择性分子印迹化学发...     

三甲氧基苄啶分子印迹整体柱的制备及色谱性能

选择甲基丙烯酸为功能单体\, 甲基丙烯酸乙二醇双酯为交联剂, 制备了三甲氧基苄啶分子印迹整体柱, 对整体柱材料的形貌进行了表征, 并且研究了TMP和5种磺胺类药物在分子印迹整体柱上的色谱行为.     

三聚氰胺分子印迹整体柱识别性能的研究

以三聚氰胺(MAM)为模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,原位聚合法制备了对MAM有很强选择性识别能力的分子印迹整体柱。采用脉冲洗脱法快速筛选MAM的洗脱剂,通过前沿色谱法测定了整体柱对MAM的结合容量。实验表明,所制备的印迹整体柱对MAM有极强亲和作用力,即使在强极性流动相中(甲醇或甲醇-水(V/V=80/20)),MAM在印迹柱上也有强保留,不被洗脱。实验测得结合位点数(Lt)和解离常数(Kd)分别为:印迹柱Lt=2.28×103μmol/g,Kd=2.45×10-5mol/L;空白柱Lt=366μmol/g,Kd=23.7mo/L。该印迹整体柱有望作为固相萃取柱,在线或离线选择性富集样品中的MAM。     

4-氨基吡啶分子印迹聚合物毛细管整体柱的制备及电色谱性能研究

以4-氨基吡啶(4-AP)为印迹分子,热引发原位合成了分子印迹聚合物毛细管整体柱,聚合物通过共价键和石英毛细管内壁相连,制备方法简单、快捷.在最佳电色谱条件下,4-AP和2-AP之间的分离度在印迹聚合物柱上高达2.5,而在不含印迹的对照柱上仅为0.35.通过研究流动相条件对4-AP,2-AP和硫脲迁移的影响,对4-AP印迹聚合物的电色谱识别机理进行了探讨.印迹识别能力随缓冲溶液离子强度的减小或流动相中乙腈比例的增大而增大.上述两种情形下,流动相中阳离子浓度均减少,使得聚合物孔穴中可与4-AP发生静电作用的有效羧基作用位点增加,从而显现出孔穴对印迹分子的专一亲和作用(形状、大小和作用力).缓冲溶液的种类和pH值对该印迹聚合物识别能力的影响较为复杂,在磷酸盐缓冲溶液体系中,pH值对识别能力的影响呈抛物线形,pH=5时识别能力最强;在醋酸盐缓冲溶液体系中,高pH值有利于分离.     

扑热息痛分子印迹聚合物应用于固相萃取的研究

以扑热息痛为印迹分子，丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为交联剂合成了棒状的印迹聚合物；把其装于自制的固相萃取柱中，研究了以乙腈和水为溶剂时扑热息痛在柱上的保留行为；通过优化清洗、洗脱条件，使扑热息痛和与其具有相似结构的非那西丁、对叔丁基苯酚在柱上得到了很好的分离；同时也测定了治疗感冒的药物海王银得菲中扑热息痛的含量，其回收率可达94．3％．     

Temperature sensitive dopamine-imprinted (N,N-methylene-bis-acrylamide cross-linked) polymer and its potential application to the selective extraction of adrenergic drugs from urine

A temperature sensitive dopamine-imprinted polymer was prepared in 80% aqueous methanol solution by free-radical cross-linking co-polymerisation of methacrylic acid and acrylamide at 60 degrees C in the presence of N,N-methylene-bis-acrylamide as the cross-linker and dopamine hydrochloride as template molecule. The resulting molecularly imprinted polymer (MIP) formed temperature responsive materials, which could be used for the selective separation of appropriate dopamine and adrenergic compounds from a liquid matrix at ambient temperatures. The thermoresponsive MIP exhibited a swelling-deswelling transition in 80% aqueous methanol solution at about 35 degrees C. The capacity of the thermoresponsive MIP to recognise the template molecule when present in aqueous methanol solution changed with temperature, with the highest selectivity found at 35 degrees C. Additionally, binding parameters obtained from Scatchard analyses indicate that increasing temperature resulted in an increased affinity and binding capacity of specific binding sites, but had less effect on non-selective binding sites. Subsequently, the thermoresponsive MIP was tested for its application as a sorbent material, utilisable in the selective solid-phase extraction (SPE) of dopamine and other adrenergic compounds (epinephrine, isoproterenol, salbutamol and serotonin) from urine samples. It was shown that the compounds that were structurally related to dopamine could be removed by elution, while dopamine and serotonin, the analytes of interest, remained strongly adsorbed to the adsorbent during SPE applications. The thermoresponsive MIP displayed different efficiency in clean-up and enrichments using the SPE protocol at different temperatures.     

Synthesis of a molecularly imprinted polymer for the selective solid-phase extraction of chloramphenicol from honey

Solid-phase extraction (SPE) with a molecularly imprinted polymer (MIP) as sorbent has been investigated for the clean-up of the broad-spectrum bacteriostatic antibiotic chloramphenicol (CAP) in honey samples. The MIP was prepared by using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as cross-linker, chloroform as porogen and CAP as template molecule. The binding behaviour of the template CAP on the MIP was evaluated by high-performance liquid chromatography, and then the MIP was applied as a sorbent in SPE to selectively extract CAP from honey. It was shown that recoveries of nearly 100% of a CAP standard solution and up to 94% from spiked honey samples could be obtained after SPE.     

金属-有机骨架MIL-101(Cr)掺杂聚合物整体柱的制备及其用于酚类化合物的在线固相萃取

制备了金属-有机骨架（MOF）MIL-101（Cr）掺杂聚合物整体柱，建立了在线固相萃取-高效液相色谱检测水中4-硝基苯酚、2-硝基苯酚、3-甲基苯酚和2，4-二氯苯酚的方法。考察了样品溶液pH值、上样时间、上样流速和解吸时间对酚类化合物萃取效果的影响。在最优萃取条件下，采用制备的整体柱检测水中酚类化合物，其富集因子高，线性范围宽，精密度好，检出限低，适用于水中酚类化合物的检测。制备掺杂聚合物整体柱是促进和拓宽MOFs在线固相萃取应用的有效方法之一。     

Molecularly imprinted solid-phase extraction of naphthalene sulfonates from water

A new polymeric sorbent synthesised by exploiting molecular imprinting technology has been used to selectively extract naphthalene sulfonates (NSs) directly from aqueous samples. In the non-covalent molecular imprinting approach used to prepare this polymer, 1-naphthalene sulfonic acid (1-NS) and 4-vinylpyridine (4-VP) were used as a template molecule and functional monomer, respectively, and both dissolved in a mixture of methanol/water (4:1) as porogen together with the cross-linker ethylene glycol dimethacrylate. The new non-covalent molecularly imprinted polymer (MIP) prepared in aqueous environment was used as a sorbent in solid-phase extraction (SPE) to selectively extract a group of naphthalene mono- and disulfonates. When one litre of a standard aqueous solution, which contained a mixture of eight NSs, was percolated through the SPE cartridge, all the NSs were retained on the MIP because of the cross-reactivity of the polymer. Recoveries were higher than 80% for all the compounds even after a clean-up step with methanol (MeOH). The MIP was also used to analyse water from the Ebro river.     

Coupling on-chip solid-phase extraction to electrospray mass spectrometry through an integrated electrospray tip

We report the integration of solid-phase extraction (SPE) with mass spectrometry (MS) through an on-chip electrospray tip for sample precleaning and preconcentration. An in situ polymerized alkylacrylate-based monolithic column was used as the stationary phase for the on-chip SPE. Each microchip consists of two sets of microchannels and their respective integrated electrospray tips, with a common gold electrode. After the microchip was fabricated from cycloolefin polymer by hot embossing, thermal bonding, and annealing steps, a mixture of monomers and porogenic solvents was pumped into the microchannels and certain areas of the main microchannels were exposed to UV irradiation through a mask. The resulting porous monolithic beds that were polymerized from different compositions of the mixture were characterized by scanning electron microscopy. The microchip containing the monolithic column was then interfaced to an ion trap (IT) mass spectrometer by modifying a commercially available interfacing system. Makeup solution from the side channel was infused concurrently with the solution flowing into the main channel, and the mixture of these two solutions was sprayed into the MS orifice. Both the adsorption and elution of a pharmaceutical test compound, imipramine, to and from the on-chip SPE columns were monitored by MS. The potential application of this device for sample cleanup was demonstrated by pretreatment of urine samples spiked with imipramine.     

Pyrrole-based conductive polymer as the solid-phase extraction medium for the preconcentration of environmental pollutants in water samples followed by gas chromatography with flame ionization and mass spectrometry detection

A pyrrole-based polymer was synthesized and applied as a new sorbent for solid-phase extraction (SPE) of some environmental pollutants from water samples. Polypyrrole (PPy) was synthesized by chemical oxidation of the monomer in nonaqueous solution. SPE of selected phenols, pesticides, and polyaromatic hydrocarbons (PAHs) from aqueous samples were performed using 200 mg PPy. The determination was subsequently carried out by gas chromatography-flame ionization detection (GC-FID) and gas chromatography-mass spectrometry (GC-MS). The polymer showed much higher recoveries for aromatic compounds than aliphatics. Preconcentration of sample volumes up 11 led to acceptable recoveries for aromatic and other tested polar compounds. The R.S.D. for a river water sample spiked with phenols, pesticides and PAHs at sub-ppb level was lower than 10% (n = 3) and limits of detection for these compounds were between 15 and 120 ng l(-1).     

二氧化锆微球表面键合磺化交联聚苯乙烯固相萃取填料的制备及应用

以聚合诱导胶体凝聚法(PICA)制备二氧化锆微球,用钛酸酯偶联剂对其进行表面改性,使其接枝上碳碳双键基团。在溶液体系中,该双键与单体苯乙烯和二乙烯苯在自由基引发下交联聚合,形成的聚合物包覆在二氧化锆微球表面。再通过磺化方法将磺酸基离子连接到苯环上,得到阳离子交换固相萃取填料。通过红外光谱、扫描电镜/X射线能谱等手段对其进行了表征。将装填得到的固相萃取柱与高效液相色谱联用,测定了水中的甲基磺草酮、阿特拉津和乙草胺。3种化合物的色谱峰面积与质量浓度呈良好的线性关系,相关系数(r²)均大于0.99;甲基磺草酮、阿特拉津和乙草胺的检出限分别为5.41、6.72和13.4 μg/L。结果表明,制得的聚合物包覆二氧化锆微球的粒径为6~8 μm,用该填料制成的固相萃取小柱对3种目标物的吸附率高。     

Solid-Phase Extraction of Caffeine and Theophylline from Green Tea by a New Ionic Liquid-Modified Functional Polymer Sorbent

The new ionic liquid-modified polymer sorbent was developed by surface chemical modification of the synthesized polymer particles using ionic liquids. The obtained ionic liquid-modified polymer was successfully used as a special sorbent in a solid-phase extraction (SPE) process to isolate caffeine and theophylline from green tea. A comparison of different SPE cartridges using the blank polymer, C₁₈, and ionic liquid-modified polymer revealed that the highest recovery was obtained using ionic liquid-modified polymer sorbent. Quantitative analysis was carried out by using a C₁₈ column (5 µm, 150 × 4.6 mm) as an analytical column. Good linearity was obtained from 5 × 10^?4 to 0.5 mg/mL (r²>0.999) for the two analytes with relative standard deviations <4.5%.     

以脲和硫氰酸铵为主体的固体电解质的研究

制得以脲和硫氰酸铵为主体的固体电解质,其室温电导率可达到４．３５×１０－２Ｓ·ｃｍ－１,比以脲和硫脲为主体固体电解质的电导率６．８４×１０－３Ｓ·ｃｍ－１提高了一个数量级。实验发现,影响电导率的因素主要有组成、温度和高分子。ＤＴＡ表明该电解质为非晶态固熔体,其导电性质既不服从Ａｒｈｅｎｉｕｓ方程,又不服从ＶＴＦ方程