钐掺杂对CeO2电解质导电性能的影响

采用溶胶-凝胶法合成Ce1-xSmxO2-δ(x=0,0.1,0.2)系列固体电解质.通过XRD,Raman,SEM和交流阻抗技术系统研究掺杂浓度、相对密度、晶粒大小和氧空位浓度对电解质导电性能的影响.XRD结果表明,所有样品均呈现CeO2结构,即形成了 Ce1-xSmxO2-δ固溶体.在掺杂离子相同,电解质的晶粒大小和相对密度十分接近的情况下,较多Sm3+的掺人能促使样品形成较多的氧空位,更有利于O2-的传递,从而使得Ce0.8Sm0.2O2-δ的电导性能高于Ce0.9Sm0.1O2-δ样品.     

纳米晶固溶体Ce0.8Nd0.2O2-δ的合成与表征

利用溶胶 -凝胶法合成纳米晶固溶体 Ce0 .8Nd0 .2 O2 -δ.XRD测试表明 ,胶体经 2 0 0℃烧结处理就可以得到晶粒尺寸为 7.2 nm的纳米晶 ,随烧结温度的升高 ,晶粒尺寸增大 .EPR测试给出固溶体 Ce0 .8Nd0 .2 O2 -δ存在少量的 Ce3 +离子 .在纳米晶固溶体 Ce0 .8Nd0 .2 O2 -δ的 Raman光谱上观察到两个峰 ,低频的强峰为特征F2 g振动谱带 ,高频谱带的出现与样品中存在氧缺位有关 .固溶体晶粒尺寸的减小不但使 F2 g振动谱带红移 ,而且谱带明显宽化 .复阻抗谱的测量表明 ,固溶体 Ce0 .8Nd0 .2 O2 -δ具有氧离子导电特性 .4 0 0和 50 0℃时的电导率分别为 4 .55× 1 0 -4 和 2 .65× 1 0 -3 S· cm-1,活化能为 0 .82 e V     

Pr0.6-xNdxCa0.4FeO3-δ体系复合氧化物的Pechini法合成与表征

采用Pechini法合成了Pr0.6-xNdxCa0.4FeO3-δ（x=0．0，0．2，0．3，0．4，0．5，0．6）系列复合氧化物粉体，用FT-IR，BET，XRD，TG-DTA，SEM等对产物形成过程及微结构进行了表征。结果表明，所合成的系列产物平均粒径均小于100nm，粉体烧结活性高，1200℃下烧结2 h样品的相对密度达到95％。所有产物在900℃下煅烧2 h即形成正交钙钛矿结构的单相固溶体；A位双稀土元素的存在对产物的晶型无影响。随着样品Pr／Nd比例的减小（x值增大），XRD衍射峰宽度有增大的趋势。采用直流四端子法测量了烧结体在中温（450～800℃）区的电导率，A位双稀土样品的电导率优于单一稀土样品，Pr0.1-Nd0.5Ca0.4FeO3-δ样品的电导率最高。     

(Ce0.8RE0.2)1-xMxO2-δ固体电解质的溶胶-凝胶合成及其电性质

利用溶胶 凝胶法合成了 (Ce0 .8RE0 .2 ) 1-xMxO2 -δ(RE :稀土 ,M :碱土 )系列固体电解质 ,XRD表明 80 0℃即形成萤石结构 ,较高温固相反应合成温度低约 70 0℃ .测定了样品的电导率和阻抗谱 .XPS测试表明 ,掺杂碱土氧化物后吸附氧浓度明显增大 ,氧空位增多 ,电导率和氧离子迁移数增大 ,改善了CeO2 基固体电解质的性能 .讨论了碱土及稀土离子对电性质的影响 .(Ce0 .8Sm0 .2 ) 1-0 .0 5 Ca0 .0 5 O2 -δ80 0℃时电导率0 1 2 6S·cm-1,氧离子迁移数 0 .99.     

氧缺位铁酸盐MFe2O4-δ的性质研究

使用XRD、M(o)ssbauer谱及化学组成分析考察了氧缺位铁酸盐MFe2O4-δ(δ＞0,M＝Fe,Co,Mn,Ni)的晶格常数、磁性、稳定性及还原性.结果表明,氧缺位铁酸盐MFe2O4-δ(δ＞0)的晶格常数比MFe2O4+δ(δ≥0)的大,M(o)ssbauer谱内磁场却更小.MFe2O4-δ(δ＞0)随着氧缺位程度δ的增大,晶格常数增大,内磁场减小.MFe2O4-δ在室温下空气中是不稳定的,只能在惰性气体中低温(＜673K)下稳定存在.MFe2O4-δ具有较强的还原能力,在573K下能将CO2还原成C.     

La1-xSrxCu0.9Fe0.1O2．5-δ阴极材料的合成与电导率研究

采用低温燃烧合成技术制备了La1-xSrxCu0．9Fc0．1O2．5-δ（x=0．1-0．4）粉体。利用X-射线衍射（XRD）和差热分析（DTA）技术对粉体的性能进行了表征。XRD结果表明，经800℃焙烧的La0．9Sr0．1Cu0．9Fe0．1O2．5-δ粉体的对称性较低，未形成钙钛矿结构，其余La1-xSrxCu0．9Fe0．1O2．5-δ（x=0．2-0．4）粉体为四方钙钛矿结构，晶体结构参数之间满足关系式a=b≈2√2c。DTA结果证明La1-xSrxCu0．9Fe0．1O2．5-δ在800℃以下是热力学稳定的，不会发生分解反应。采用直流四电极法测试了La1-xSrxCu0．9Fe0．1O2．5-δ试样在100-800℃之间的电导率。试样的电导率^ln（σT）与1／T之间呈很好的线性关系，说明La1-xSrxCu0．9Fe0．1O2．5-δ在测试温度范围内服从小极化子导电机制。Sr掺杂量对试样的电导率和电导活化能有着明显的影响，当Sr掺杂量为0．3时，La1-xSrxCu0．9Fe0．1O2．5-δ的电导率最高，电导活化能最小。     

固体电解质Ce_(0.9)Er_(0.1-x)Pr_xO_(1.95+δ)的微观结构及电性能

采用柠檬酸溶胶-凝胶法制备了固体电解质Ce0.9Er0.1-xPrxO1.95+δ(x=0.02~0.08),利用X射线粉末衍射(XRD)、原子力显微镜(AFM)、拉曼光谱(Raman)、X射线光电子能谱(XPS)和交流阻抗谱研究了样品的微观结构和电性能.XRD结果表明,800℃煅烧的所有样品均形成了单相立方萤石结构;Raman光谱结果表明,Ce0.9Er0.05Pr0.05O1.95+δ具有氧缺位的立方萤石结构;XPS分析表明,Ce0.9Er0.05Pr0.05O1.95+δ存在氧缺位,Pr3+离子和Pr4+离子共存;AFM观测结果表明,1300℃下烧结的样品比1400℃下烧结的样品致密;交流阻抗谱结果表明,Pr掺杂量x=0.05时,Ce0.9Er0.05Pr0.05O1.95+δ的电导率最高(σ600℃=1.34×10-2S/cm,Ea=0.90 e V),比未掺杂Pr的Ce0.9Er0.1O1.95(σ600℃=8.81×10-3S/cm,Ea=0.92 e V)提高了52%,说明在Ce0.9Er0.1O1.95中适量掺杂Pr可提高材料的电导率,降低活化能.     

铈基复合氧化物的结构及其对HCl催化氧化性能的影响

采用氨水共沉淀法制备了一系列铈基复合氧化物(Ce0.9M0.1O2,M=Cu、Cr、Zr、Ti、La),借助XRD、Raman、N2吸附-脱附、ESEM和H2-TPR等手段对复合氧化物的结构进行了表征,并考察了其在HCl催化氧化制Cl2过程中的性能.结果显示:Cu、Cr和Zr掺杂能显著减小复合氧化物晶粒尺寸,提高复合氧化物的比表面积和孔容,并提供更多的低温可还原氧物种.而La和Ti的掺杂可以获得较大的表面氧空位浓度以及增加高温可还原氧物种数目.复合氧化物结构和表面性质的变化显著影响了其HCl催化氧化活性,在430℃下铈基复合氧化物催化剂活性顺序为:Ce0.9Cu0.1O2Ce0.9Cr0.1O2Ce0.9Zr0.1O2Ce0.9Ti0.1O2Ce O2Ce0.9La0.1O2,低温可还原氧物种数目直接与催化剂活性有关.反应动力学测试显示催化剂低温可还原氧物种有利于HCl在催化剂表面的吸附和活化,而催化剂表面的氧空位可以促进氧分子的吸附和活化.     

Ce1-xFexO2复合氧化物催化剂的制备及其对甲烷的催化燃烧性能

采用柠檬酸溶胶-凝胶法和微波技术制备了Ce1-x Fex O2复合氧化物，以甲烷催化燃烧为探针反应测定了催化剂的活性及XRD、DRS、BET和TPR进行了表征。结果表明，Ce1-x Fex O2复合氧化物为介孔材料，所制得的复合氧化物在x≤0．2时以单一立方萤石结构的Ce1-x Fex O2固溶体存在，x〉0．2时形成了立方萤石结构Ce1-x Fex O2固溶体和少量的CeFeO3混合相。Ce1-x Fex O2固溶体的甲烷催化燃烧活性高于单组分CeO2，且随着x的不同而变化，其中以Ce0.9 Fe0.1 O2固溶体的催化活性最高。     

水热老化对含钯La0．9Sr0．1CoO3－δ／α－A12O3催化性能的影响

以浸渍法制备了α-A12O3负载的含钯La0．9Sr0．1CoO3-δ钙钛矿样品，探讨了水热老化对样品催化CO-NO反应性能的影响，并以XRD，TPR和XPS等对样品在水热老化前后的结构进行了表征．结果表明，钯的引入方式直接影响样品的水热性能．掺钯样品(LaSrCoPd)具有良好的水热性能，经水热老化后，其催化活性显著提高，显示出最好的催化性能；样品中钯离子位于钙钛矿晶相内，形成α-A12O3负载的La0．9Sr0．1Co0.95Pd0.05O3-δ,La0．9Sr0．1CoO3-δ／α-A12O3负载钯的样品(Pd／LaSrCo)具有最高的初活性，但经水热老化后，其催化活性明显降低在水热老化过程中，La0．9Sr0．1CoO3-δ钙钛矿的结构稳定，但含钯钙钛矿晶相中的钯离子迁移聚集成独立的PdO颗粒，较小的PdO颗粒聚集成较大的颗粒．水热老化后，Pd／LaSrCo样品表面裸露的钯原子数目减少．导致其催化活性降低；而LaSrCoPd样品表面裸露的钯原子数目增多，导致其催化活性升高．     

Relativistic-consistent electron densities of the coinage metal clusters M2, M4, M4(2-), and M4Na2 (M = Cu, Ag, Au): a QTAIM study

We employ second-order M?ller-Plesset perturbation theory level in combination with recently developed pseudopotential-based correlation consistent basis sets to obtain accurate relativistic-consistent electron densities for small coinage metal clusters. Using calculated electron densities, we employ Bader's quantum theory of atoms in molecules (QTAIM) to gain insights into the nature of metal-metal bonding in the clusters M(2), M(4), M(4)(2-), and M(4)Na(2) (M = Cu, Ag, Au). For the simplest case of the metal dimer, M(2), we correlate the strength of the metal-metal bond with the value of the electron density at the bond critical point, the total energy density at the bond critical point, the sharing (delocalization) index, and the values of the two principle negative curvatures. We then consider changes to the metal-metal bonding and charge density distribution upon the addition of two metal atoms to form the metal tetramer, M(4), and then followed by the addition of an electron pair to form M(4)(2-) and finally followed by the addition of two alkali metal (sodium) ions to form M(4)Na(2). Using topological properties of the electron density, we present evidence for the existence of σ-aromaticity in Au(4)(2-). We also report the existence of two non-nuclear attractors in the molecular graph of Cu(4)(2-) and large negative charge accumulation in the nonbonded Cu basins of this cluster.     

Ti-48Al-2M~1-2M~2(M~1=Nb,V;M~2=Mn,Cr,V)合金电子结构

用紧束缚能带计算方法(EHT)研究了标题多元合金的能带及电子结构。发现少量的多种元素在γ-TiAl中掺杂,对合金中电荷分布的影响,具有单种元素掺杂的叠加性;选择适当的合金元素就能达到多种掺杂的性能互补。多种元素掺杂能更有效地使成键电子云趋势于球形化,Peierls力均称为化,有利于增加γ-TiAl合金的塑性和变形性。     

Heterocyclic compounds M1M2E1E2H8 (M1, M2 = Al,Ga, In; E1, E2 = N,P, As): A quantum chemical study

Structural and thermodynamic characteristics of heteroelement inorganic heterocycles M¹M²E¹E²H₈ (M¹, M² = Al, Ga, In; E¹, E² = N, P, As) were calculated by the density functional theory B3LYP/LANL2DZ(d,p) method. It was shown that energetic characteristics of heterocycle dissociation processes can be calculated by simple a additive scheme with the use of the average M-E bond energy. Dissociation of heteroelement heterocycles into monomeric H₂MEH₂ molecules proceeds according to the hardsoft acid-base (HSAB) concept.     

Electronic Structure of TiAl-2M(M=V,Nb,Ta,Cr,Mo,W,Mn) Alloy

1INTRODUCTIONTitaniumaluminidesbasedonY-TiAlarereceivingconsiderableattentionaspo-tentialcandidatesformaterialsinhightemperatureaerospaceapplication.Theirlowdensity,hightemperaturescreepresistance,highoxidationresistanceandstrengthmakesthemexcellentpotentialenginematerials.Howevertheirlowductilityandlowfracturetoughnessatroom'temperaturesaremajorhindrancestotheirpracticaluti-lization.TheTiAlalloymayhaveanelongationabout2%t'},furtherimprovementisnecessarybeforethesematerialscouldbeusedin…     

Heterodinuclear M1M2 Complexes (M1=Ni,Pd, Pt; M2=Rh,Ir) Supported by a Tetradentate Phosphine Ligand and Their Application for Hydrosilylation

A new series of cationic heterodinuclear complexes, [M¹M²Cl₂(meso-dpmppp)(RNC)₂]PF₆ (M¹=Ni, M²=Rh, R=^tBu ( 1 a ); M¹=Pd, M²=Rh, R=^tBu ( 2 a ), Xyl ( 2 b ); M¹=Pt, M²=Rh, R=^tBu ( 3 a ), Xyl ( 3 b ); M¹=Pd, M²=Ir, R=^tBu ( 4 a )), supported by a tetradentate phosphine ligand, meso-Ph₂PCH₂P(Ph)(CH₂)₃P(Ph)CH₂PPh₂ (meso-dpmppp), were synthesized by stepwise reactions of meso-dpmppp with NiCl₂ ⋅ 6H₂O or MCl₂(cod) (M=Pd, Pt), forming mononuclear metalloligands of [M¹Cl₂(meso-dpmppp)], and with [M²Cl(cod)]₂ (M²=Rh, Ir) and RNC (R=^tBu, Xyl) in the presence of [NH₄][PF₆]. The related neutral PdRh complex, [PdRhCl₃(meso-dpmppp)(XylNC)] ( 5 ), was also prepared. The structures of 1 – 5 were determined by X-ray analyses to contain two square planar d⁸ metal centers with face-to-face arrangement, where meso-dpmppp supports M¹ and M² metal ions in cis/trans-P,P coordination mode, combining cis-{M¹P₂Cl₂} and trans-{M²P₂(CNR)₂} units. Complexes 1 – 4 showed an intence characteristic absorption around 422–464 nm derived from Rh^I→RNC MLCT transition (HOMO→LUMO+1), which are influenced by changing M¹ (Ni^II, Pd^II, Pt^II) metal ions since HOMO composed of dσ* orbitals appreciably destabilized by changing M¹ from Ni to Pd, and Pt. The electronic structures of 1 a – 4 a were investigated on the basis of DFT calculations and NBO analyses to show weak but noticeable d⁸–d⁸ metallophilic interaction as empirical dispersion energy of 0.9–1.5 kcal/mol without M¹–M² covalent bonding interaction. In addition, 1 – 5 were utilized as catalysts for hydrosilylation of styrene, and the NiRh complex 1 a was found to show higher activity and chemo- and regioselectivity compared with 2 – 5 .     

Isolation and Structure Elucidation of Enniatins L,M1, M2, and N: Novel Hydroxy Analogs

Four new cyclohexadepsipeptides, enniatins L ( 1 ), M₁ ( 2 ), M₂ ( 3 ), and N ( 4 ), have been isolated from an unidentified fungus (BCC 2629), together with the known enniatins B ( 5 ), H ( 6 ), and I ( 7 ), MK1688 ( 8 ), and enniatin B₄ ( 9 ). Compounds 1 – 4 are the first enniatin analogs with an OH group at the side chain of one of the 2‐hydroxycarboxylic acid residues. The structures of 1 – 4 were elucidated by spectroscopic means and by X‐ray crystallography.