Complementary Lock-and-Key Ligand Binding of a Triplet Transmitter to a Nanocrystal Photosensitizer

Owing to the difficulty in comprehensively characterizing nanocrystal (NC) surfaces, clear guidance for ligand design is lacking. In this work, a series of bidentate bis(pyridine) anthracene isomers (2,3-PyAn, 3,3-PyAn, 2,2-PyAn) that differ in their binding geometries were designed to find the best complementary fit to the NC surface. The efficiency of triplet energy transfer (TET) from the CdSe NC donor to a diphenylanthracene (DPA) acceptor mediated by these isomers was used as a proxy for the efficacy of orbital overlap and therefore ligand binding. 2,3-PyAn, with an intramolecular N–N distance of 8.2 Å, provided the best match to the surface of CdSe NCs. When serving as a transmitter for photon upconversion, 2,3-PyAn yielded the highest upconversion quantum yield (QY) of 12.1±1.3 %, followed by 3,3-PyAn and 2,2-PyAn. The TET quantum efficiencies determined by ultrafast transient absorption measurements showed the same trend.     

Employing Core‐Shell Quantum Dots as Triplet Sensitizers for Photon Upconversion

A new family of surface‐functionalized CdSe/ZnS core‐shell quantum dots (csQD) has been developed, which work as triplet sensitizers for triplet‐triplet annihilation‐based photon upconversion (TTA‐UC). The surface modification of csQD with acceptor molecules plays a key role in the efficient relay of the excited energy of csQD to emitter molecules in the bulk solution, where the generated emitter triplets undergo triplet‐triplet annihilation that leads to photon upconversion. Interestingly, improved UC properties were achieved with the core‐shell QDs compared with core‐only CdSe QDs (cQD). The threshold excitation intensity, which is defined as the necessary irradiance to achieve efficient TTA process, decreases by more than a factor of four. Furthermore, the total UC quantum yield is enhanced more than 50‐fold. These enhancements should be derived from better optical properties of csQD, in which the non‐radiative surface recombination sites are passivated by the shell layer with wider bandgap.     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Comparative study on polyimides from isomeric 3,3′‐, 3,4′‐, and 4,4′‐linked bis(thioether anhydride)s

Three isomeric bis(thioether anhydride) monomers, 4,4′‐bis(2,3‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,3′‐PTPKDA), 4,4′‐bis(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (4,4′‐PTPKDA), and 4‐(2,3‐dicarboxyphenylthio)‐4′‐(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,4′‐PTPKDA), were prepared through multistep reactions. Their structures were determined via Fourier transform infrared, NMR, and elemental analysis. Three series of polyimides (PIs) were prepared from the obtained isomeric dianhydrides and aromatic diamines in N‐methyl‐2‐pyrrolidone (NMP) via the conventional two‐step method. The PIs showed excellent solubility in common organic solvents such as chloroform, N,N‐dimethylacetamide, and NMP. Their glass‐transition temperatures decreased according to the order of PIs on the basis of 3,3′‐PTPKDA, 3,4′‐PTPKDA, and 4,4′‐PTPKDA. The 5% weight loss temperatures (T_5%) of all PIs in nitrogen were observed at 504–519 °C. The rheological properties of isomeric PI resins based on 3,3′‐PTPKDA/4,4′‐oxydianiline/phthalic anhydride showed lower complex viscosity and better melt stability compared with the corresponding isomers from 4,4′‐ and 3,4′‐PTPKDA. In addition, the PI films based on three isomeric dianhydrides and 2,2′‐bis(trifluoromethyl)benzidine had a low moisture absorption of 0.27–0.35%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and micropatterning properties of a novel base‐soluble,positive‐working,photosensitive polyimide having an o‐nitrobenzyl ether group

A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et₃N. The DHBA monomer was synthesized by exhaustive KMnO₄ oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from ¹H NMR absorption of benzylic CH₂ protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm² when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007     

Selective Endo and Exo Binding of Mono‐ and Ditopic Ligands to a Rhomboidal Diporphyrin Prism

Copper(I) can preferentially form heteroleptic complexes containing two phosphine and two nitrogen donors due to steric factors. This preference was employed to direct the self‐assembly of a porphyrin‐faced rhomboidal prism having two parallel tetrakis(4‐iminopyridyl)porphyrinatozinc(II) faces linked by eight 1,4‐bis(diphenylphosphino)benzene pillars. The coordination preferences of the Cu^I ions and geometries of the ligands come together to generate a slipped‐cofacial orientation of the porphyrinatozinc(II) faces. This orientation enables selective encapsulation of 3,3′‐bipyridine (bipy), which bridges the Zn^II ions of the parallel porphyrins, whereas 4,4′‐bipy exhibits weaker external coordination to the porphyrin faces. Reaction with 2,2′‐bipy, by contrast, results in the displacement of the tetratopic porphyrin ligand and formation of [{(2,2′‐bipy)Cu^I}₂(diphosphine)₂]. The differing strengths of interactions of bipyridine isomers with the system allows for a hierarchy to be deciphered, whereby 4,4′‐bipy may be displaced by 3,3′‐bipy, which in turn is displaced by 2,2′‐bipy.     

PbS/CdS Core–Shell Quantum Dots Suppress Charge Transfer and Enhance Triplet Transfer

A sub‐monolayer CdS shell on PbS quantum dots (QDs) enhances triplet energy transfer (TET) by suppressing competitive charge transfer from QDs to molecules. The CdS shell increases the linear photon upconversion quantum yield (QY) from 3.5 % for PbS QDs to 5.0 % for PbS/CdS QDs when functionalized with a tetracene acceptor, 5‐CT . While transient absorption spectroscopy reveals that both PbS and PbS/CdS QDs show the formation of the 5‐CT triplet (with rates of 5.91±0.60 ns⁻¹ and 1.03±0.09 ns⁻¹ respectively), ultrafast hole transfer occurs only from PbS QDs to 5‐CT . Although the CdS shell decreases the TET rate, it enhances TET efficiency from 60.3±6.1 % to 71.8±6.2 % by suppressing hole transfer. Furthermore, the CdS shell prolongs the lifetime of the 5‐CT triplet and thus enhances TET from 5‐CT to the rubrene emitter, further bolstering the upconverison QY.     

A single‐strand helical coordination polymer: catena‐poly­[[[tri­aqua­nickel(II)]‐μ‐2,2′‐bi­pyridine‐3,3′‐di­carboxyl­ato‐κ3N,N′:O] monohydrate]

The asymmetric unit of the title compound, {[Ni(C₁₂H₆N₂O₄)(H₂O)₃]·H₂O}_n, is composed of a lattice water mol­ecule and a nickel(II) ion that is coordinated by three water mol­ecules and the two N atoms of a 2,2′‐bi­pyridine‐3,3′‐di­carboxyl­ate ligand. The twist of the 2,2′‐bi­pyridine‐3,3′‐di­carboxyl­ate unit and the coordination of one carboxyl­ate group to a symmetry‐related Ni^II atom generate a helical chain that runs along the b axis. Intrahelical hydrogen bonds participate in controlling the orientation of the helices, and both right‐handed and left‐handed helices are connected by interhelical hydrogen bonds into two‐dimensional sheets.     

Stereoinvertive C–C Bond Formation at the Boron‐Bound Stereogenic Centers through Copper‐Bipyridine‐Catalyzed Intramolecular Coupling of α‐Aminobenzylboronic Esters

Enantiospecific intramolecular Suzuki–Miyaura‐type coupling with α‐(2‐halobenzoylamino)benzylboronic esters to give 3‐substituted isoindolinones is achieved by using copper catalysts with 2,2′‐bipyridine‐based achiral ligands. Enantioenriched α‐aminobenzylboron reactants bearing a hydrogen atom at the boron‐bound stereogenic carbons undergo stereoinvertive coupling in the presence of a 6‐phenyl‐2,2′‐bipyridine ligand with high enantiospecificity. α‐Aminobenzylboronates bearing fully substituted boron‐bound stereogenic centers also gave the 3,3‐disubstituted isoindolinones with stereospecific stereochemical inversion in the presence of simple 2,2′‐bipyridine as a ligand.     

Low‐dimensional compounds containing cyano groups. II. catena‐Poly[[(2,2′‐bipyridine‐κ2N:N′)(dicyanamido‐κN)copper(II)]‐μ‐dicyanamido‐κ2N:N′]

The crystal structure of the title compound, [Cu(C₂N₃)₂(C₁₀H₈N₂)]_n, is formed by neutral zigzag chains of the [–NC–N–CN–Cu{(bpy)N(CN)₂}–NC–N–CN–] type run­ning along the c axis (bpy is 2,2′‐bi­pyridine). The Cu atoms in the chains are pentacoordinated in the form of a distorted tetragonal pyramid, with a CuN₅ chromophore. The coordination sites are occupied by two N atoms of one bpy mol­ecule in the basal plane [Cu—N 2.018 (4) and 2.025 (2) Å] and by three terminal N atoms of two dicyan­amide ligands. One of the dicyan­amide ligands is coordinated in a monodentate fashion through a nitrile N atom in the basal plane [Cu—N 1.963 (4) Å]. The second acts as an end‐to‐end bridging ligand to a neighbouring Cu atom and is coordinated by one nitrile N atom in the basal plane [Cu—N 2.001 (2) Å], while the second nitrile N atom occupies the apical position [Cu—N 2.159 (2) Å] and originates from the bridge connecting another Cu atom. The shortest intrachain Cu?Cu distance is 8.212 (1) Å, as a consequence of the large bridging ligand, whereas the minimum interchain distance between Cu atoms is only 5.77 (7) Å, because of the interdigitation of the chains.     

In‐Situ Microfluidic Study of Biphasic Nanocrystal Ligand‐Exchange Reactions Using an Oscillatory Flow Reactor

Oscillatory flow reactors provide a surface energy‐driven approach for automatically screening reaction conditions and studying reaction mechanisms of biphasic nanocrystal ligand‐exchange reactions. Sulfide and cysteine ligand‐exchange reactions with as‐synthesized CdSe quantum dots (QDs) are chosen as two model reactions. Different reaction variables including the new‐ligand‐to‐QD ratio, the size of the particles, and the original ligand type are examined systematically. Based on the in situ‐obtained UV/Vis absorption spectra during the reaction, we propose two different exchange pathways for the sulfide exchange reaction.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

Construction of lanthanide complexes supported by 2,3‐dimethoxybenzoic acid and 5,5’‐dimethy‐2,2’‐bipyridine: crystal structures,thermoanalysis, magnetic and fluorescence properties

A series of novel trivalent lanthanide complexes, [Ln(2,3‐DMOBA)3(5,5′‐DM‐2,2′‐bipy)]2·C2H5OH (Ln = Eu(1), Sm(2), Gd(3), Ho(4) Er(5), Pr(6), Nd(7)) (2,3‐DMOBA = 2,3‐dimethoxybenzoate, 5,5′‐DM‐2,2′‐bipy = 5,5′‐dimethy‐2,2′‐bipyridine), have been successfully synthesized and structurally validated by single crystal diffraction. All complexes discussed herein feature a binuclear structure, and contain only one free ethanol molecule, which is interesting in the lanthanide complexes. The coordination number of center Ln3+ ions is nine, showing a distorted monocapped square anti‐prismatic coordination geometry. Through a pair of alternating identical C‐H···O hydrogen bonding interactions between two 2,3‐DMOBA ligands on the same lanthanum binuclear unit with 5,5′‐DM‐2,2′‐bipy ligands on two neighboring units, the binuclear complexes can form one‐ The thermal analysis of these complexes are investigated by TG‐DSC/FTIR, the result show that the decomposition process of complexes are mainly divided into four stages with the formation of the respective oxides. The visible light emission experiment of complex 1 is carried out, and the characteristic luminescence behavior of intense red light is exhibited. What'more, fluorescence lifetimes as well as the fluorescent quantum yield of complex 1 is calculated. And the magnetic properties of complexes 3–5 are also studied.     

Study of the Photochemical Properties and Conical Intersections of [2,2′‐Bipyridyl]‐3‐amine‐3′‐ol

The two isoelectronic bipyridyl derivatives [2,2′‐bipyridyl]‐3,3′‐diamine and [2,2′‐bipyridyl]‐3,3′‐diol are experimentally known to undergo very different excited‐state double‐proton‐transfer processes, which result in fluorescence quantum yields that differ by four orders of magnitude. In a previous study, these differences were explained from a theoretical point of view, because of topographical features in the potential energy surface and the presence of conical intersections (CIs). Here, we analyze the photochemical properties of a new molecule, [2,2′‐bipyridyl]‐3‐amine‐3′‐ol [BP(OH)(NH₂)], which is, in fact, a hybrid of the former two. Our density functional theory (DFT), time‐dependent DFT (TDDFT), and complete active space self‐consistent field (CASSCF) calculations indicate that the double‐proton‐transfer process in the ground and first singlet π→π* excited state in BP(OH)(NH₂) presents features that are between those of their “parents”. The presence of two CIs and the role they may play in the actual photochemistry of BP(OH)(NH₂) and other bipyridyl derivatives are also discussed.     

Polyimides from isomeric oxydiphthalic anhydrides

2,2′,3,3′‐Oxydiphthalic dianhydride (2,2′,3,3′‐ODPA) and 2,3,3′,4′‐ODPA were synthesized from 3‐chlorophthalic anhydride with 2,3‐xylenol and 3,4‐xylenol, respectively. Their structures were determined via single‐crystal X‐ray diffraction. A series of polyimides derived from isomeric ODPAs with several diamines were prepared in dimethylacetamide (DMAc) with the conventional two‐step method. Matrix‐assisted laser desorption/ionization time‐of‐flight spectra showed that the polymerization of 2,2′,3,3′‐ODPA with 4,4′‐oxydianiline (ODA) has a greater trend to form cyclic oligomers than that of 2,3,3′,4′‐ODPA. Both 2,2′,3,3′‐ODPA and 2,3,3′,4′‐ODPA based polyimides have good solubility in polar aprotic solvents such as DMAc, dimethylformamide, and N‐methylpyrrolidone. The 5% weight‐loss temperatures of all polyimides were obtained near 500 °C in air. Their glass‐transition temperatures measured by dynamic mechanical thermal analysis or differential scanning calorimetry decreased according to the order of polyimides on the basis of 2,2′,3,3′‐ODPA, 2,3,3′,4′‐ODPA, and 3,3′,4,4′‐ODPA. The wide‐angle X‐ray diffraction of all polyimide films from isomeric ODPAs and ODA showed some certain extent of crystallization after stretching. Rheological properties revealed that polyimide (2,3,3′,4′‐ODPA/ODA) has a comparatively lower melt viscosity than its isomers, which indicated its better melt processability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3249–3260, 2003     

Imide‐functionalized naphthodithiophene based donor‐acceptor conjugated polymers for solar cells

Donor‐acceptor conjugated polymers containing a new imide‐functionalized naphthodithiophene (INDT) as the acceptor unit and a 2,2'‐bithiophene with varied substituents as the donor unit have been synthesized. The bandgaps of these polymers depend strongly on the dihedral angle of the 2,2'‐bithiophene unit. The 3,3'‐dialkoxy substitution (polymers PDOR / PBOR ) leads to near planar bithiophene conformation due to the well‐known S–O short contact, while the 3,3'‐dialkyl substitution (polymer PDR ) results in significant twisting due to the steric effect. Consequently PDOR / PBOR shows the lowest bandgap of 1.82/1.85 eV while PDR has a bandgap of 2.38 eV. Bulk‐heterojunction solar cells of the polymer/fullerene blends have been fabricated. Preliminary results show that PBOR gives the best device performance with power conversion efficiencies as high as 2.45% in air without any thermal annealing treatment, indicating the promising potential of INDT‐containing conjugated polymers for efficient solar cells. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3818–3828     

A Novel Coordination Polymer, [Ag4^1 （bpdc）（H2bpdc）（Hbpdc）2]n （bpdc = 2,2＇-bipyridyl-3,3＇-dicarboxylate）： Coordination Models of bpdc Ligands

A novel coordination polymer, [Ag₄ppdc)(H₂bpdc)(Hbpdc)₂] (bpdc = 2,2′‐bipyridyl‐3,3′‐dicarboxylate), was hydrothermally synthesized at 403 K and structurally characterized by single crystal X‐ray diffraction analysis. The compound crystalizes in the monoclinic space group C2/c with a=1.9516(4) nm, b=1.9503(4) nm. c=1.2566(3) nm, and β=112.48(3)°. In the two‐dimensional crystal structure, Ag^I center is coordinated, in a scarce coordination environment, double‐capped tetrahedron, by one bpdc ligand to form N‐Ag‐N chelate bond via two pyridyl N atoms, and other two bpdc ligands to form two O‐Ag‐O chelate bonds, respectively, via two carboxyl O atoms. The bpdc ligands are present in one non‐protonated form, bpdc, and two protonated forms, Hbpdc and H2bpdc, which all act as μ3‐ligand in a hexadentate fashion (N, N′; O, O′; O, O′) to coordinate with three Ag centers, respectively, through the three chelate bonds. This coordinated fashion of bpdc ligand is first found in the title compound. W‐Us‐NIR reflectance spectroscopy study revealed insulator nature for the crystal with an optical energy gap of 3.1 eV.     

Donor‐Induced Helical Inversion of 1,1′‐Binaphthyl Connecting with Two Molybdenum Complexes

An atropisomeric biaryl molecule with a given absolute configuration could present two opposite helical conformations through the rotation around C? C single bond. To the best of our knowledge, the biaryl system is the simplest helical inversion model apart from stereomutation between two enantiomers. Herein, we first report such true helical inversion phenomena of biaryl compounds. Two [Mo^VIO₂(L)]‐type complexes, in which L is a tridentate dioxoanionic pyridine O,N,O‐ligand, are coalesced on the 2,2′,3,3′‐positions of an (R)‐1,1′‐binaphthyl unit and an intramolecular dioxo bridge is formed by two Mo?O???Mo interactions. Exterior strong donors can coordinate to molybdenum to interrupt this dioxo bridge and inversions from negative to positive chirality are explicitly observed by circular dichroism spectroscopy, consistent with single‐crystal X‐ray diffraction analyses.     

(2,2′‐Bi­pyridine‐κ2N,N′)(2,3‐naph­tha­lene­diolato‐κ2O,O′)­palladium(II) and (2,2′‐bi­quinoline‐κ2N,N′)(2,3‐naph­thal­ene­diolato‐κ2O,O′)­palladium(II)

In the title compounds, [Pd(C₁₀H₆O₂)(C₁₀H₈N₂)], (I), and [Pd(C₁₀H₆O₂)(C₁₈H₁₂N₂)], (II), each Pd^II atom has a similar distorted cis‐planar four‐coordination geometry involving two O atoms of the 2,3‐­naphthalenediolate dianion and two N atoms of the 2,2′‐bi­pyridine or 2,2′‐bi­quinoline ligand. The overall structure of (I) is essentially planar, but that of (II) is not, as a result of intramolecular overcrowding leading to bowing of the bi­quinoline ligand.     

Metal‐Ion Sensing Europium(III) Complexes with Bidentate Phosphine Oxide Ligands Containing a 2,2′‐Bipyridine Framework

Novel Eu^III complexes with bidentate phosphine oxide ligands containing a bipyridine framework, i.e., [3,3′‐bis(diphenylphosphoryl)‐2,2′‐bipyridine]tris(hexafluoroacetylacetonato)europium(III) ([Eu(hfa)₃(BIPYPO)]) and [3,3′‐bis(diphenylphosphoryl)‐6,6′‐dimethyl‐2,2′‐bipyridine]tris(hexafluoroacetylacetonato)europium(III) ([Eu(hfa)₃(Me‐BIPYPO)]), were synthesized for lanthanide‐based sensor materials having high emission quantum yields and effective chemosensing properties. The emission quantum yields of [Eu(hfa)₃(BIPYPO)] and [Eu(hfa)₃(Me‐BIPYPO)] were 71 and 73%, respectively. Metal‐ion sensing properties of the Eu^III complexes were also studied by measuring the emission spectra of Eu^III complexes in the presence of Zn^II or Cu^II ions. The metal‐ion sensing and the photophysical properties of luminescent Eu^III complexes with a bidentate phosphine oxide containing 2,2′‐bipyridine framework are demonstrated for the first time.