Determination of gallium at trace levels using a spectrofluorimetric method in synthetic U–Ga and Ga–As solutions

A simple, easy to use and selective spectrofluorimetric method for the determination of trace levels of gallium has been developed. A new Schiff base, N-o-vanillidine-2-amino-p-cresol (OVAC) was synthesized and its fluorescence activity with gallium investigated. Based on this chelation reaction, a spectrofluorimetric method has been developed for the determination of gallium in synthetically prepared Ga–U and Ga–As samples buffered at pH 4.0 using acetic acid–sodium acetate. The chelation reaction between Ga(III) and N-o-vanillidine-2-amino-p-cresol was very fast, requiring only 30 min at room temperature to complex completely. The limit of detection (LOD) (3σ) for Ga(III) was 7.17 nM (0.50 μg L^?1), determined from the analysis of 11 different solutions of 20 μg L^?1 Ga(III).     

Synthesis and structure of a dmpe-substituted dinuclear complex bridged by a substituent-free gallium atom: Electronic effect of metal fragment on the iron–gallium bonding

A dinuclear complex bridged by a substituent-free gallium atom, Cp¹(dmpe)Fe–Ga–Fe(CO)₄ (1b: Cp¹ = η-C₅Me₅, dmpe = Me₂PCH₂CH₂PMe₂), was synthesized by the reaction of Cp¹Fe(dmpe)GaCl₂ with K₂[Fe(CO)₄]. Crystal structure analysis of complex 1b showed that the geometry around the gallium atom is essentially linear and the two Fe–Ga bonds are significantly shorter than those of usual single bonds, indicating the multiple bonding character of the Fe–Ga bonds. Comparison of the structure and IR data of 1b and those of Cp¹(dppe)Fe–Ga–Fe(CO)₄ (1a: dppe = Ph₂PCH₂CH₂PPh₂) revealed that the Fe–Ga bond is sensitive to the electronic character of the metal fragment. The Fe–Ga bond is shortened upon introducing a more π-basic metal fragment.     

Construction and characterization of nano iron complex ionophore for electrochemical determination of Fe(III) in pure and various real water samples

Electrochemical methods represent an important class of widely used techniques for the detection of metal ions. The unique chemical and physical properties of nanoparticles make them extremely suitable for designing new and improved sensing devices, especially electrochemical sensors and biosensors. This study focused on the synthesis of a nano‐Fe(III)–Sud complex and its characterization using various spectroscopic and analytical tools, optimized using the density functional theory method, screened for antibacterial activity and evaluated for possible binding to DNA using molecular docking study. Proceeding from the collected information, nano‐Fe(III)–Sud was used further for constructing carbon paste and screen‐printed ion‐selective electrodes. The proposed sensors were successfully applied for the determination of Fe(III) ions in various real and environmental water samples. Some texture analyses of the electrode surface were conducted using atomic force microscopy. At optimum values of various conditions, the proposed electrodes responded towards Fe(III) ions linearly in the range 2.5 × 10^?9–1 × 10^?2 and 1.0 × 10^?8–1 × 10^?2 M with slope of 19.73 ± 0.82 and 18.57 ± 0.32 mV decade^?1 of Fe(III) ion concentration and detection limit of 2.5 × 10^?9 and 1.0 × 10^?8 M for Fe(III)–Sud‐SPE (electrode I) and Fe(III)–Sud‐CPE (electrode II), respectively. The electrode response is independent of pH in the range 2.0–7.0 and 2.5–7.0, with a fast response time (4 and 7 s) at 25°C for electrode I and electrode II, respectively. Moreover, the electrodes also showed high selectivity and long lifetime (more than 6 and 3 months for electrode I and electrode II, respectively). The electrodes showed good selectivity for Fe(III) ions among a wide variety of metal ions. The results obtained compared well with those obtained using atomic absorption spectrometry.     

Vanadium(III) complexes containing phenoxy–imine–thiophene ligands: Synthesis,characterization and application to homo‐ and copolymerization of ethylene

A set of vanadium(III) complexes, namely {SNO}VCl₂(THF)₂ ( 2a , SNO = thiophene‐(N═CH)‐phenol; 2b , SNO = 5‐phenylthiophene‐(N═CH)‐phenol; 2c , SNO = 5‐phenylthiophene‐(N═CH)‐4‐tert ‐butylphenol; 2d , SNO = 5‐methylthiophene‐(N═CH)‐phenol; 2e , SNO = 5‐methylthiophene‐(N═CH)‐4‐tert ‐butylphenol; 2f , SNO = 5‐methylthiophene‐(N═CH)‐2‐methylphenol; 2g , SNO = 5‐methylthiophene‐(N═CH)‐4‐fluorophenol), were synthesized by reaction of VCl₃(THF)₃ with phenoxy–imine–thiophene proligands ( 1a – g ). All vanadium(III) complexes were characterized using elemental analysis and infrared and electron paramagnetic resonance spectroscopies. Upon activation with methylaluminoxane (MAO), vanadium precatalysts 2a – g proved active in the polymerization of ethylene (213.6–887.2 kg polyethylene (mol[V])⁻¹⋅h⁻¹), yielding high‐density polyethylenes with melting temperatures in the range 133–136 °C and crystallinities varying from 28 to 41%. The 2e/ MAO catalyst system was able to copolymerize ethylene with 1‐hexene affording poly(ethylene‐co ‐1‐hexene)s with melting temperatures varying from 126 to 102 °C and co‐monomer incorporation in the range 3.60–4.00%.     

Addition of alkynes to a gallium bis-amido complex: imitation of transition-metal-based catalytic systems

Acetylene, phenylacetylene, and alkylbutynoates add reversibly to (dpp‐bian)Ga–Ga(dpp‐bian) (dpp‐bian=1,2‐bis[(2,6‐diisopropylphenyl)‐imino]acenaphthene) to give addition products [dpp‐bian(R¹C?CR²)]Ga–Ga[(R²C?CR¹)dpp‐bian]. The alkyne adds across the Ga? N? C section, which results in new carbon–carbon and carbon–gallium bonds. The adducts were characterized by electron absorption, IR, and ¹H NMR spectroscopy and their molecular structures have been determined by single‐crystal X‐ray analysis. According to the X‐ray data, a change in the coordination number of gallium from three [in (dpp‐bian)Ga–Ga(dpp‐bian)] to four (in the adducts) results in elongation of the metal–metal bond by approximately 0.13 Å. The adducts undergo a facile alkynes elimination at elevated temperatures. The equilibrium between [dpp‐bian(PhC?CH)]Ga–Ga[(HC?CPh)dpp‐bian] and [(dpp‐bian)Ga–Ga(dpp‐bian) + 2 PhC?CH] in toluene solution was studied by ¹H NMR spectroscopy. The equilibrium constants at various temperatures (298≤T≤323 K) were determined, from which the thermodynamic parameters for the phenylacetylene elimination were calculated (ΔG°=2.4 kJ mol^?1, ΔH°=46.0 kJ mol^?1, ΔS°=146.0 J K^?1mol^?1). The reactivity of (dpp‐bian)Ga–Ga(dpp‐bian) towards alkynes permits use as a catalyst for carbon–nitrogen and carbon–carbon bond‐forming reactions. The bisgallium complex was found to be a highly effective catalyst for the hydroamination of phenylacetylene with anilines. For instance, with [(dpp‐bian)Ga–Ga(dpp‐bian)] (2 mol %) in benzene more than 99 % conversion of PhNH₂ and PhC?CH into PhN?C(Ph)CH₃ was achieved in 16 h at 90 °C. Under similar conditions, the reaction of 1‐aminoanthracene with PhC?CH catalyzed by (dpp‐bian)Ga–Ga(dpp‐bian) formed a carbon–carbon bond to afford 1‐amino‐2‐(1‐phenylvinyl)anthracene in 99 % yield.     

<Superscript>68</Superscript>Ga-radiolabeled magnetic nanoparticles for PET–MRI imaging

In this study, magnetic multimodal nanoparticles with potential applications in magnetic- and nuclear-medicine imaging, magnetic resonance imaging, hyperthermia, and theranostic (therapeutic and diagnostic), applications were prepared by coating iron oxide nanoparticles with silica (core–shell), functionalizing with aminopropyltriethoxy silane and coupling with diethylenetriamine pentaacetic acid ligand (DTPA). Radiolabeling of core–shell–DTPA particles with ⁶⁸Ga radiometal was carried out through chelation of ⁶⁸Ga(III) ions by DTPA and was used for positron emission tomography. The biodistribution of the ⁶⁸Ga-radiolabeled magnetic nanoparticles compared to free ⁶⁸Ga(III) was checked in normal Balb/c mice up to 2 h.     

Rapid synthesis of carbon materials by microwave-assisted hydrothermal method at low temperature and its adsorption properties for uranium (VI)

The cathelicidin-derived peptide (CDP1) is a human antimicrobial peptide that preferentially targets bacterial membranes in response to infection. CDP1 was functionalised with NODAGA and DOTA for complexation with gallium-68 to evaluate its potential as an infection imaging tracer. The synthesis of [⁶⁸Ga]Ga–NODAGA–CDP1 and [⁶⁸Ga]Ga–DOTA–CDP1 were optimised for pH, molarity, incubation time and temperature, and product purification. The integrity and protein binding were investigated employing [⁶⁸Ga]GaCl₃ and [⁶⁸Ga]Ga–DOTA–TATE as internal references. [⁶⁸Ga]Ga–NODAGA–CDP1 displayed good labelling properties with higher product yield compared to [⁶⁸Ga]Ga–DOTA–CDP1. In contrast, [⁶⁸Ga]Ga–DOTA–CDP1 showed better stability and is the preferred candidate for an in vivo investigation.

     

Effect of the ionic strength on the redox reaction of dicyanobis(bipyridine)iron(III)‐iodide in binary and ternary solvent systems

The redox reaction between dicyanobis(bipyridine)iron(III) and iodide ion follows first‐order kinetics in 10% (v/v) tertiary butyl alcohol‐water. The reaction was found first and zero order in iodide and dicyanobis(bipyridine)iron(III), respectively, at 0.06 M ionic strength and 293 ± 1 K. The thermodynamic parameters of activation such as E_A (16.07 kJ mol^?1), A (1 × 10^?4 M s^?1), ΔH^# (13.6 kJ mol^?1), ΔS^# (?329.81 J K^?1 mol^?1), and ΔG^# (90.1 kJ mol^?1) were determined. The effect of the ionic strength on the rate constant leads to recognizing the stabilization or destabilization of the transition state complex that forms during the rate‐determining step of the reaction. The value of the zero‐order rate constant was decreased with increasing ionic strength that yielded a negative value of the slope in each binary and ternary solvent systems. This negative sign refers to the electron transfer between opposite charge carriers such as [Fe^III(bpy)₂(CN)₂]⁺ and I^? during the rate‐determining step. The destabilization of the transition state complex is surfaced by the increasing slope, that is, 5 < 10 < 15% (v/v) tertiary butyl alcohol‐water with a gradual decrease in the rate constant. However, its stability emerges by relatively small values of the slope in 17.5 < 25 ≤ 30% (v/v) tertiary butyl alcohol‐water and 8:2:90 < 6:4:90% (v/v) dioxane: tertiary butyl alcohol: water with reasonably fast rate of reaction.     

Preparation of ferric nitrate–graphene nanocomposite and its adsorption of arsenic(V) from simulated arsenic‐containing wastewater

Ferric nitrate–graphene (FG) nanocomposites synthesized via the equivalent‐volume impregnation method were used for the removal of As(V) species from simulated arsenic‐containing wastewater. Effects of various factors were assessed, such as the reaction temperature, solution pH, adsorbent dosage, and reaction time. The results indicated that the As(V) removal efficiency was as high as 99%, and the concentration of arsenic‐containing wastewater after FG treatment was as low as 9.4 μg L^–1 as a result of the optimal absorption capacity and maximum specific surface area (171.766 m²/g) of this material. The equilibrium adsorption capacity of FG for As(V) was achieved in approximately 20 min, and the maximum adsorption capacity was calculated to be 112.4 mg g^–1 by Langmuir adsorption isotherm, which was higher than that of other adsorbents such as manganese‐incorporated iron(III) oxide–graphene (14.42 mg g^–1). Moreover, the removal efficiency of As(V) can be maintained above 95% under acidic and alkaline conditions. Brunauer–Emmett–Teller analysis showed that the modified FG pore structure was regular. Based on the characterizations by X‐ray diffraction, X‐ray photoelectron spectroscopy, and Fourier transform infrared, the products on the surface of the used FG were Fe(OH)₃, FeAsO₄, and other compounds, and As(V) was mainly removed by the formation of insoluble compounds and coprecipitation.     

Stripping Voltammetric Determination of Zirconium with Complexing Preconcentration of Zirconium(IV) at a Morin‐Modified Carbon Paste Electrode

A sensitive, selective and economic stripping voltammetry is described for the determination of trace amounts of zirconium at a morin‐modified carbon paste electrode (morin‐MCPE). Zirconium(IV) can be preconcentrated on the surface of the morin‐MCPE due to forming the Zr(IV)–morin complex. The complex produces two second‐order derivative anodic peaks at 0.69 V (vs. SCE) and 0.75 V when linear‐scanning from 0.0 to 1.0 V. The optimum analytical conditions are: 2.2 mol L^?1 HCl, 0.0 V accummulation potential, 90 s accummulation time, 250 mV s^?1 scan rate. A linear relationships between the peak currents at 0.75 V and the Zr(IV) concentration are in the range of 2.0×10^?8 to 3.0×10^?6 mol L^?1. The detection limit is 1.0×10^?8 mol L^?1 (S/N=3) for 120 s accumulation. The RSD for determination of 4.0×10^?7 mol L^?1 Zr(IV) is 4.8% (n=8). The proposed method has been applied to determine zirconium in ore samples, unnecessarily extracted.     

Complexation of a tripodal amine-catechol ligand tris((2,3-dihydroxybenzylamino)ethyl)amine towards Al(III), Ga(III), and In(III)

Abstract  The complexation of a tripodal amine-catechol ligand tris((2,3-dihydroxybenzylamino)ethyl)amine (TRENCAT, L) with group-13 metal ions, viz., Al(III), Ga(III), and In(III), were investigated by means of potentiometric titrations and spectrophotometric measurements in an aqueous medium of 0.1 M KCl at 25 ± 1 °C. The ligand shows the potential to form various monomeric complexes of the types MLH₃, MLH₂, MLH, and ML. At low pH, the ligand is coordinated through three more acidic ortho-catecholic O-atoms to give MLH₃ species. With the rise in pH, the species MLH₃ releases three protons in steps from the meta-catecholic O-atoms to form MLH₂, MLH, and ML. The order of stability Ga(III) > Al(III) > In(III) for the species MLH₃ and MLH₂ is changed into Al(III) > Ga(III) > In(III) for the species MLH and ML. The coordination modes, binding ability, selectivity, and the change in stability order were explained with the help of experimental evidence, molecular modeling calculations, and available literature. Graphical Abstract        

Synthesis and solid‐state structures of t‐Bu3Ga–EPh3 Lewis acid–base adducts

Three Lewis acid–base adducts t‐Bu₃Ga–EPh₃ (E = P 1 , As 2 , Sb 3 ) were synthesized by reactions of Ph₃E and t‐Bu₃Ga and characterized by heteronuclear NMR (¹H, ¹³C (³¹P)) and IR spectroscopy, elemental analysis and single crystal X‐ray diffraction. Their structural parameters are discussed and compared to similar t‐Bu₃Ga adducts. The strength of the donor‐acceptor interactions within 1 – 3 was investigated in solution by temperature‐dependent ¹H NMR spectroscopy and by quantum chemical calculations.     

Morin as a spectrophotometric reagent for gold

A reaction of morin with gold(III) in a hydrochloric acid medium has been studied. A redox reaction occurring in the examined system has been identified. The oxidized form of morin (λ_max at 291 nm), being the product of the reaction, has been used as the basis of the spectrophotometric method for the determination of gold. Gold can be determined in the concentration range of 0.2–12 μg mL⁻¹ (RSD in the range of 0.89–2.38%). The molar absorptivity at 291 nm is equal to 2.02 × 10⁴ L mol⁻¹. cm⁻¹. The developed method was applied to the determination of gold (0.04%) in a cosmetic cream. Published in Russian in Zhurnal Analiticheskoi Khimii, 2006, Vol. 61, No. 2. pp. 129–133. The text was submitted by the authors in English.     

Spectroscopic,textural, electrical and magnetic properties of antimicrobial nano Fe(III) Schiff base complex

A novel Schiff base ligand (L) was prepared through condensation of 2,6‐diaminopyridine and dibenzoyl methane in a 1:1 ratio. This Schiff base ligand was used for complex formation reaction with Fe(III) chloride. The structures of the ligand and its complex were deduced from elemental analyses, mass spectroscopy, ¹H NMR, IR, UV‐Vis, electronic spectra, magnetic moment, molar conductivity measurements, thermogravimetric analyses and X‐ray diffraction. The molecular and electronic structures of both ligand and complex were optimized theoretically using density function theory (DFT) method. Moreover, the antimicrobial activities of the prepared compounds were studied and proven against some pathogenic bacteria. The Fe(III) complex had higher biological activity than that of the free ligand. Proceeding from the collected information, the properties of the complex were further investigated. The particle size was determined by dynamic light scattering technique to be 92.59 nm. Textural properties of the nano complex were studied by N₂ adsorption to estimate the specific surface area, pore volume and pore size distribution. The pores in the complex were found in the micropore–mesopore range. Differential scanning calorimetric measurements reveal the existence of four endothermic peaks at 243.8, 308, 339.8 and 380.5 K. Dielectric properties and conductivity were scanned at different frequencies and temperatures. The dielectric constant reaches a peak value of 600 at ~390 K, 30 Hz. A cross‐over from the universal dielectric response to the super linear power law of conductivity was reported for this complex at T ≤ 345 K. Finally, the AC‐magnetic susceptibility measurements were carried out in the low‐temperature region. The complex showed paramagnetic behavior with a slight change in the magnitude of its magnetic moment at T = 244 K.     

Spectroscopic and electrochemical study for evaluating DNA interaction activity of 4‐(3‐halophenyl)‐6‐(pyridin‐2‐yl)pyrimidin‐2‐amine based piano stool Cp* Rh (III) and Ir (III) complexes

Six novel organometallic half sandwich complexes [(η5‐C₅Me₅)M(L^1–3)Cl]Cl.2H₂O were synthesized using [{(η⁵‐C₅Me₅)M(μ‐Cl)Cl₂], where M = Ir (III)/Rh (III) and L^1–3 = three pyridyl pyrimidine based ligands; and characterized by NMR, Infra‐red spectroscopy, conductance, elemental and thermal analysis. The complex‐DNA binding mode and/or strength evaluated using absorption titration, electrochemical studies and hydrodynamic measurement proposed intercalative binding mode, which was also confirmed by molecular docking study. Differential pulse voltammetry and cyclic voltammetry studies indicated an alteration in oxidation and reduction potentials of complexes (M⁺⁴/M⁺³) in presence of CT‐DNA. The metal complexes can cleave plasmid DNA as proposed in gel electrophoretic analysis. The LC₅₀ values of complexes evaluated on brine shrimp suggested their potent cytotoxic nature.     

Structural studies and quantum chemical calculations of Cr(III), Fe(III) and Ru(III) bromazepam complexes

The reaction of bromazepam (7‐bromo‐1,3‐dihydro‐5‐(2‐pyridyl)‐2H ‐1,4‐benzodiazepin‐2‐one, BZM) with Cr(III) ( 1 ), Fe(III) ( 2 ) and Ru(III) ( 3 ) salts gives complexes of the type [M(BZM)₃]⋅3X (X = Cl or NO₃). Structural characterization was extensively carried out using various analytical and spectral tools such as infrared, ¹H NMR and UV–visible spectroscopies and magnetic, conductance, elemental and thermal analyses. BZM is a bidentate ligand and interacts with the metal ions via the pyridine and benzodiazepin‐2‐one nitrogen atoms. The magnetic and electronic properties of 2 and 3 are consistent with low‐spin octahedral complexes. The three BZM molecules are non‐isoenergetically coordinated to the metal ions and this is reflected in the values of the second‐order interaction energy. The antibacterial activity was studied using Staphylococcus aureus and Escherichia coli . Coordination of BZM to Cr(III) or Ru(III) ions leads to a marked increase in toxicity with respect to the inactive Fe(III) complex 2 .     

A UPLC–MS/MS method for comparative pharmacokinetics study of morusin and morin in normal and diabetic rats

The aim of this study was to establish and validate a rapid, selective and reliable ultra‐performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) for simultaneous quantitations of morin and morusin, and to investigate their pharmacokinetics difference between normal and diabetic rats after oral administration. Plasma samples were pretreated via protein precipitation with acetonitrile. Genkwanin was used as internal standard (IS). Analytes and IS were separated on a Thermo Hypersil Gold C₁₈ column (50 × 4.6 mm, 3 μm) using gradient elution. The mobile phase consisted of acetonitrile and 0.1% formic acid in water at a flow rate of 0.5 mL/min. Mass spectrometry detection was carried out by means of negative electrospray ionization source and multipe‐reaction monitoring mode. The transitions of m/z 300.9 → 151.2 for morin, m/z 419.2 → 297.1 for morusin and m/z 283.1 → 268.2 for IS were chosen for quantification. Calibration curves were linear in the range of 1.01–504.2 ng/mL (r² ≥ 0.99) for morin and 1.02–522.3 ng/mL (r² ≥ 0.99) for morusin. The lower limit of quantification was 1.02 ng/mL for morin and 1.05 ng/mL for morusin. The extraction recovery was >85.1% for each analyte. No obvious matrix effect was observed under the present UPLC–MS/MS conditions during all of the bioanalysis. The stability study demonstrated that morin and morusin remained stable during the whole analytical procedure. The method was successfully applied to support the pharmacokinetic comparisons of morin and morusin between normal and diabetic rats.     

Novel Dendritic PNP Chromium Complexes: Synthesis,Characterization, and Performance on Ethylene Oligomerization

Three dendritic PNP ligands with ethylenediamine, 1,4‐butanediamine, 1,6‐diaminohexane as bridged groups are synthesized in good yields, respectively. Three dendritic PNP chromium complexes ( C1  –  C3 ) are prepared with the ligands and chromium(III ) chloride tetrahydrofuran complex (CrCl₃(THF )₃) as materials. The dendritic PNP ligands and the synthetic chromium complexes are fully characterized by spectroscopic and analytical methods. All chromium complexes activated with methylaluminoxane (MAO ) exhibited moderate activities on ethylene oligomerization (7.90 × 10⁴ – 2.15 × 10⁵ g (mol Cr h)⁻¹] and had better selectivity for C₆ and C₈ oligomer, reaching up to 81%. The chromium complex ( C1 ) activated with diethylaluminium chloride (Et₂AlCl) has higher catalytic activity than the chromium complex C1 activated with MAO , although the chromium complex ( C1 ) activated with Et₂AlCl had lower selectivity for C₆ and C₈ oligomer. The effects of solvent and reaction parameters on ethylene oligomerization are also studied using the chromium complex C1 as pre ‐ catalyst and MAO as co ‐ catalyst. Under optimized conditions ([complex] = 2 μmol, Al/Cr = 500, 25 °C, 0.9 MP a ethylene, 30 min), the catalytic activity of complex C1 in toluene is 2.15 × 10⁵ g (mol Cr h)⁻¹ and the selectivity for C₆ and C₈ oligomer is 36.76%. In addition, the structure of complexes significantly affects both the catalytic activity and the selectivity on ethylene oligomerization.     

Synthesis,structural studies and antimicrobial evaluation of nickel (II) complexes of NNS tridentate thiosemicarbazone based ligands

Synthesis and characterization of three nickel complexes [NiCl(L¹)] 1 , [NiCl(L²)] 2 and [NiCl(L³)] 3 are described {HL¹ = 4‐(2,5‐dimethoxyphenyl)‐1‐((pyridin‐2‐yl)methylene)thiosemicarbazide, HL² = 4‐(3‐nitrophenyl)‐1‐((pyridin‐2‐yl)methylene)thiosemicarbazide and HL³ = 4‐(2,4‐dimethoxyphenyl)‐1‐((pyridin‐2‐yl)methylene)thiosemicarbazide} and among the tridentate ligands HL³ is reported for the first time. The structures of the complexes were assigned based on CHNS microanalysis, spectroscopic (IR & UV–Vis.) data and solution conductivity studies. The absence of any magnetism for the complexes proved their square planar geometry. Single crystals of complex 1 were grown and analyzed by XRD analysis which confirmed the complex planarity as each Ni atom connects to three (two nitrogen and one sulfur) atoms from the thiosemicarbazone ligand and an additional chlorine atom. Packing of the complex 1 in the crystal lattice was proved to stabilize via intermolecular hydrogen bonds. Antimicrobial activities of 1 – 3 were studied in vitro against fungal and bacterial species and, in several instances, the complexes possessed improved antibacterial behavior in comparison to chloramphenicol.     

Synthesis,Crystal Structure and Spectroscopic Properties of [2,13‐Bis(1‐naphthalenylmethyl)‐5,16‐dimethyl‐2,6,13,17‐tetraazatricyclo(14,4,01.18,07.12)docosane]copper(II) Diperchlorate Acetonitrile Disolvate

The N‐functionalized macrocyclic ligand 2,13‐bis(1‐naphthalenylmethyl)‐5,16‐dimethyl‐2,6,13,17‐tetraazatricyclo(14,4,0^1.18,0^7.12)docosane (L³) and its copper(II) complex were prepared. The crystal structure of [Cu(L³)](ClO₄)₂·2CH₃CN was determined by single‐crystal X‐ray diffraction at 150 K. The copper atom, which lies on an inversion centre, has a square planar arrangement and the complex adopts a stable trans‐III configuration. The longer distance [2.081(2) Å] for Cu–N(tertiary) compared to 2.030(3) Å for Cu–N(secondary) may be due to the steric effect of the attached naphthalenylmethyl group on the tertiary nitrogen atom. Two perchlorate ions are weakly attached to copper in axial sites and are further connected to the ligand of the cation through NH ··· O hydrogen bonds [N ··· O 3.098 Å]. IR and UV/Vis spectroscopic properties are also described.