乙烷部分氧化超细Fe－Mo－O催化剂的研究

采用溶胶-凝胶法制备了Fe－Mo－O催化剂，用XRD、TEM、BET、IR、TPR、TPD和微反等技术研究了催化剂晶体结构、表面构造、晶格氧活泼性、化学吸附和乙烷部分氧化反应性能。Fe－Mo－O复合氧化物催化剂是由超细微粒组成，微粒粒径约10 nm～20 nm，比表面积为48.1 m2/g。催化剂表面由Lewis碱位（Mo=O键的端氧和Fe－O－Mo键中的桥氧）及Lewis酸位构成。乙烷能以甲基中的H原子吸附在催化剂表面Lewis碱位Mo=O的端氧上形成分子吸附态，其部分氧化产物主要是C2H4和少量的CH3CHO。     

丙烷选择氧化制丙烯醛催化剂中Ce的作用

考察了一系列助剂如:Cu、Zn、Mn、W、Ce、Pr、Nd等对Ag-Mo-P-O催化剂丙烷选择氧化制丙烯醛的影响.其中添加助剂Ce的Ag-Mo-P-O催化性能较好.添加Ce降低了丙烷氧化反应的活化能并有利于中间产物丙烯转化为丙烯醛.采用BET、XRD、H2-TPR、O2-TPD、C3H8-TPD和EPR等方法,研究了含Ce催化剂的结构和性质.结果表明,助剂Ce改善了催化剂的可还原性,并调变了催化剂中Mo5＋/Mo6＋比例,有利于催化剂上丙烷选择氧化生成丙烯醛,这可能归因于催化剂中形成Ce3＋＋Mo6＋Ce4＋＋Mo5＋氧化-还原循环的缘故.     

丁烯催化裂解反应中的C-H键型副反应和化学平衡问题

用小型固定床反应器以及氨气程序升温脱附(NH<,3>-TPD)和吡啶吸附红外光谱(Py-IR)研究了醚后碳四液化气中的丁烯在改性纳米ZSM-5沸石催化剂上的催化裂解反应.结果表明,丁烯催化裂解反应的丙烯选择性主要受氢转移和脱氢反应制约.这些C-H键型反应生成烷烃和芳烃副产物,并导致催化剂积炭.低温有利于氢转移(尤其异丁...     

Mn助剂对Ni/γ-Al2O3催化剂CO2甲烷化性能的影响

采用等体积浸渍法制备了Ni/γ-Al<,2>O<,3>和Ni-Mn/γ-Al<,2>O<,3>催化剂,在连续流动微反装置上考察了催化剂的CO<,2>甲烷化催化活性.借助N<,2>物理吸附、XRD、TEM、H<,2>-TPR、TPD及TPSR手段对催化剂的结构和性质进行表征.结果表明,Ni/γ-Al<,2>O<,3>中M...     

聚集态的Fe氧化物在Fe/ZSM-5催化N_2O直接分解中的作用(英文)

研究了以离子交换法制备的Fe/ZSM-5上聚合态的Fe氧化物(FeOx)在催化N2O直接分解中的作用.Fe/ZSM-5催化剂利用600–900 ℃的高纯Ar处理,使催化剂中的FeOx发生聚合.利用一系列的表征手段(XRD,BET,DRIFTS,UV/vis-DRS,XAFS,N2O脉冲和O2-TPD)对催化剂进行了表征.结果发现,分子筛骨架外的FeOx在Fe/ZSM-5催化N2O分解中起重要作用;通过研究高温处理的Fe/ZSM-5催化剂中不同FeOx的比例与催化剂活性的关系,得到多核的FeOx是催化N2O分解的主要活性物种;并且,无定形态的FeOx中键长较长的Fe–O键((Fe–O)2)是参与反应的重要物种.     

聚集态的Fe氧化物在Fe/ZSM-5催化N2O直接分解中的作用（英文）

研究了以离子交换法制备的Fe/ZSM-5上聚合态的Fe氧化物(FeOx)在催化N2O直接分解中的作用.Fe/ZSM-5催化剂利用600–900 ℃的高纯Ar处理,使催化剂中的FeOx发生聚合.利用一系列的表征手段(XRD,BET,DRIFTS,UV/vis-DRS,XAFS,N2O脉冲和O2-TPD)对催化剂进行了表征.结果发现,分子筛骨架外的FeOx在Fe/ZSM-5催化N2O分解中起重要作用;通过研究高温处理的Fe/ZSM-5催化剂中不同FeOx的比例与催化剂活性的关系,得到多核的FeOx是催化N2O分解的主要活性物种;并且,无定形态的FeOx中键长较长的Fe–O键((Fe–O)2)是参与反应的重要物种.     

KOH修饰Au/Al2O3催化剂的低温CO氧化催化反应性能

采用等体积浸渍法制备了KOH-Au/Al<,2>O<,3>系列催化剂,考察了催化剂对低温CO氧化反应的初始活性和干、湿气氛下连续反应的稳定性能,并用电感耦合等离子发射光谱、红外光谱、高分辨透射电镜、紫外漫反射光谱等技术对催化剂进行了结构表征.结果表明:与母体催化剂(Au/Al<,2>O<,3>)相比,修饰催化剂(KOH...     

甲苯选择性氧化制苯甲醛—Fe-Mo系催化剂的组成、结构及催化性能研究

制备了一系列Fe/Mo原子比不同的Fe-Mo系催化剂,测定了甲苯选择性氧化制苯甲醛的活性和选择性,采用XRD、比表面积测量、SEM、XPS、UVDRS等测试技术,考察了该系列催化剂的有关物理化学性质。结果表明,在催化剂中不生成固溶体,当 Fe/Mo原子比低于0.67时,催化剂为MoO_3和Fe_2(MoO_4)_3两相组成,当Fe/Mo原子比高于0.67时,物相为Fe_2O_3和Fe_2(MoO_4)_3,在催化剂表面上,Mo以 Mo~(6+)价态存在,并含有少量由于失氧而产生的 Fe~(2+)离子,当催化剂中Fe/Mo原子比为0.29时,催化活性和选择性最好,比表面积也较大,对影响该系列催化剂性能的有关因素进行了详细的讨论。     

助剂Mo对Ni基催化剂加氢脱氧催化作用机理的影响

制备了一系列Ni-Mo/γ-Al2O3催化剂,并采用X射线衍射、乙酸程序升温表面反应、NO-红外漫反射光谱、乙酸(或乙醇)-红外漫反射光谱等表征手段系统研究了助剂Mo的加入对Ni基催化剂的物化性质、乙酸加氢脱氧(HDO)产物、HDO活性位及乙酸(或乙醇)吸附形态的影响.结果表明,Mo的加入可提高活性组分NiO的分散度,且能抑制乙酸C-C键的断裂;Mo的加入可提供氧空穴,以促进乙酸C-O键及中间产物乙醇C-O键的断裂,显著提高了Ni基催化剂的HDO活性和产物C2H6的选择性.表明Mo的加入改变了Ni催化剂HDO的催化作用机理.     

Mo 和 Cu 助剂对 FeK/SiO2 催化剂费托合成性能的影响

 研究了 Mo 和 Cu 助剂对 FeK/SiO₂ 催化剂的性质及费托 (F-T) 合成性能的影响. 采用 N₂ 物理吸附、H₂ 程序升温还原、X 射线衍射、穆斯堡尔谱和 X 射线光电子能谱技术对催化剂进行了表征. 结果表明, Mo 加入后与 Fe 产生了较强的相互作用, 抑制了催化剂的还原和碳化; Cu 助剂的加入促进了催化剂的还原和碳化; 当 Mo 和 Cu 共同加入后, 催化剂的还原和碳化行为与单独加入 Cu 助剂时相似. 催化剂 F-T 合成性能在固定床上于 280 ^oC, 1.5 MPa, 2 000 h^-1, H₂/CO = 2.0 的合成气中测试. 结果表明, Mo 的加入降低了催化剂活性, 但提高了重质烃 (C₅₊) 的选择性; Cu 的添加提高了催化剂的活性, 但对稳定 C₅₊选择性作用不明显. Mo 和 Cu 共同加入后, 催化剂既表现出较为稳定的 C₅₊选择性, 同时其活性也没有降低.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。