Novel thermally stable and chiral poly(amide-imide)s bearing from N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid: Synthesis and characterization

Novel optically active aromatic poly(amide-imide)s (PAIs) were prepared from newly synthesized N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid (3) via polycondensation with various diamines. The diacid was synthesized by the condensation reaction of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (1) with l-isoleucine (2) in a mixture of acetic acid and pyridine (3:2 v/v). All the polymers were obtained in quantitative yields with inherent viscosities of 0.20-0.43 dL g⁻¹. All the polymers were highly organosoluble in solvents like N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), tetrahydrofuran, γ-butyrolactone, cyclohexanone and chloroform at room temperature or upon heating. These poly(amide-imide)s had glass transition temperatures between 198 and 231 °C, and their 10% weight-loss temperatures were ranging from 368 to 398 °C and 353 to 375 °C under nitrogen and air, respectively. The polyimide films had tensile strengths in the range of 63-88 MPa and tensile moduli in the range of 0.8-1.4 GPa. These poly(amide-imide)s possessed chiral properties and the specific rotations were in the range of −3.10° to −72.92°.     

A series of metal-organic frameworks constructed with arenesulfonates and 4,4′-bipy ligands

Five transition metal compounds containing arenesulfonates and 4,4′-bipy ligands, namely [Zn₂(N,N′-4,4′-bipy)(N-4,4′-bipy)₂(H₂O)₈](bpds)₂ · 5H₂O (1), [Ag₂(N,N′-4,4′-bipy)₂(bpds)] (2), [Cd(N,N′-4,4′-bipy)(H₂O)₄]₂(4-abs)₄ · 5H₂O (3), [Cu(N,N′-4,4′-bipy) (O-bs)₂(H₂O)₂] · 4H₂O (4), and [Zn(N,N′-4,4′-bipy)₂(H₂O)₂](4,4′-bipy)(bs)₂ · 4H₂O (5) (4,4′-bipy = 4,4′-bipyridine, bpds = 4,4′-biphenyldisulfonate, 4-abs = 4-aminobenzenesulfonate, bs = benzenesulfonate), have been synthesized and characterized by X-ray single crystal diffraction, elemental analyses and TG analyses, in order to investigate the coordination chemistry of arenesulfonates and 4,4-bipy, as well as to construct novel coordination frameworks via mixed-ligand strategy. Compounds 2, 4 and 5 could be obtained via hydrothermal or aqueous reactions. Compound 1 forms a binuclear octahedral metal complex. Compounds 2–4 form polymeric chains. Compound 5 consists of 2D square grids with one intercalated 4,4′-bipy molecule. Weak Ag–Ag interactions are observed in compound 2. These complexes show great structural varieties and there are three different coordination modes observed for both the 4,4′-bipy and the sulfonate ligands.     

Synthesis and characterization of new soluble and thermally stable poly(ester-imide)s derived from N-[3,5-bis(N-trimellitoyl)phenyl]phthalimide and various bisphenols

A new dicarboxylic acid chloride (2) bearing three preformed imide rings was synthesized by treating N-(3,5-diaminophenyl)phthalimide with trimellitic anhydride followed by refluxing with thionyl chloride. A novel family of aromatic poly(ester-imide)s with inherent viscosities of 0.27-0.35 dl g⁻¹ were prepared from 2 with various bisphenols such as resorcinol (3a), hydroquinone (3b), 2,2′-dihydroxybiphenyl (3c), 4,4′-dihydroxybiphenyl (3d), bisphenol-A (3e), 2,2′-dimethyl-4,4′-dihydroxybiphenyl (3f), 1,5-dihydroxynaphthalene (3g), 2,7-dihydroxynaphthalene (3h), and 2,2′-dihydroxy-1,1′-binaphthyl (3i) by high-temperature solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher. All of the resulted polymers were fully characterized by FT-IR and NMR spectroscopy and elemental analyses. The poly(ester-imide)s exhibited excellent solubility in some polar organic solvents. From differential scanning calorimetry, the polymers showed glass-transition temperatures between 259 and 353 °C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis and the 10% weight loss temperatures of the poly(ester-imide)s were found to be in the range between 451 and 482 °C in nitrogen. Furthermore, crystallinity of the polymers was estimated by means of wide-angle X-ray diffraction.     

Ultrasound assisted syntheses of a nano-structured two-dimensional mixed-ligand cadmium(II) coordination polymer and direct thermolyses for the preparation of cadmium(II) oxide nanoparticles

A nano-sized mixed-ligand Cd(II) coordination polymer, {[Cd(bpa)(4,4′-bipy)₂(H₂O)₂](ClO₄)₂}_n (1); bpa = trans-1,2-bis(4-pyridyl)ethane and 4,4′-bipy = 4,4′-bipyridine, has been synthesized by a sonochemical method and characterized by IR and ¹H NMR spectroscopy. Compound 1 grows in one dimension by two different bridging ligands, 4,4′-bipy and bpa. The thermal stability of compound 1 in the bulk form and nano-sized was studied by thermogravimetric (TG) and differential thermal analysis (DTA). The crystallinity of this compound was studied by X-ray powder diffraction and compared with an XRD simulation of the single crystal data. CdO nanoparticles were obtained by direct calcination at 500 °C and decomposition in oleic acid at 200 °C of the nano-sized compound 1. The obtained cadmium(II) oxide nano-particles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Syntheses and characterization nano-structured bismuth(III) oxide from a new nano-sized bismuth(III) supramolecular compound

Nano-particles of a new Bi(III) supramolecular compound, {Bi₂(μ-4,4′-bipy)Cl₁₀] · 2(4,4′-Hbipy) · (4,4′-H₂bipy) · 2H₂O} (1) {4,4′-bipy = 4,4′-bipyridine}, were synthesized by a sonochemical method. The nano-material was characterized by scanning electron microscopy, X-ray powder diffraction (XRD), IR spectroscopy and elemental analyses. Crystal structure of compound 1 was determined by X-ray crystallography. Calcination of the nano-particles of compound 1 at 400 °C under air atmospheres yields nano-sized particles of α-Bi₂O₃.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 8a and 8b were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 1 (R¹ = ⁿPr and Ph) with the bis-amidrazone 7 and 2,5-norbornadiene 5 in ethanol at reflux.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Synthesis, photoluminescent and electrochromic properties of new aromatic poly(amine-hydrazide)s and poly(amine-1,3,4-oxadiazole)s derived from 4,4′-dicarboxy-4″-methyltriphenylamine

A series of new poly(amine-hydrazide)s I were prepared from the dicarboxylic acid 4,4′-dicarboxy-4″-methyltriphenylamine with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. Polymers I were readily soluble in many common organic solvents, and could be solution cast into transparent, tough, and flexible films with good mechanical properties. Differential scanning calorimetry (DSC) indicated that the hydrazide polymers had T_g’s in the range of 222-223 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300-400 °C. The resulting poly(amine-1,3,4-oxadiazole)s II exhibited T_g’s in the range of 269-283 °C, 10% weight-loss temperatures in excess of 511 °C, and char yield at 800 °C in nitrogen higher than 63%. These poly(amine-hydrazide)s I exhibited strong UV-Vis absorption bands at 351-355 nm in NMP solution. Their photoluminescence spectra in NMP solution and film showed maximum bands around 459-461 nm in the blue region for I series. The hole-transporting and electrochromic properties are examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the poly(amine-hydrazide)s I prepared by casting polymer solution onto an indium-tin oxide (ITO)-coated glass substrate exhibited one reversible oxidation redox couples at 1.32-1.33 V vs. Ag/AgCl in acetonitrile solution. All obtained poly(amine-hydrazide)s I revealed excellent stability of electrochromic characteristics, changing color from original pale yellowish to blue.     

Metal-directed supramolecular assembly of metal(II) benzoates (M = Co,Ni, Cu,Zn, Mn,and Cd) with 4,4′-bipyridine: Effects of metal coordination modes and novel catalytic activities

Six polymeric metal(II)-benzoate complexes of formula [Co₂(O₂CPh)₄(4,4′-bpy)₂]_n (1-Co), [Ni(O₂CPh)₄(H₂O)₂(4,4′-bpy)]_n (2-Ni), [Cu₂(O₂CPh)₄(4,4′-bpy)]_n (3-Cu), [Zn₂(O₂CPh)₂(OH)₂(4,4′-bpy)₂]_n (4-Zn), [Zn₃(O₂CPh)₄(μ-OH)₂(4,4′-bpy)₂]_n (5-Zn), and [Cd₂(O₂CPh)₄(4,4′-bpy)₂]_n (6-Cd) have been synthesized and characterized (4,4′-bpy = 4,4′-bipyridine). 1-Co and 6-Cd show ladder-type double chains, 2-Ni does a helical structure, 3-Cu does a one-dimensional chain containing paddle-wheel units, 4-Zn does a zigzag chain, and 5-Zn does two-dimensional sheets. Since different structures provide different coordination geometry of each metal ion, it is clear that selection of appropriate metal ions can control the coordination geometry of each metal ion to form different crystal structures. Reactivity study of the compounds 1–7 for the transesterification of a variety of esters has shown that 4-Zn and 5-Zn are very efficient and the best among them. The catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, also catalyzed efficiently the transesterification of a variety of esters, and its reactivity is comparable to 4-Zn and 5-Zn. Moreover, the redox-active metal-containing polymers, 1-Co, 3-Cu, and 7-Mn, have shown efficient catalytic reactivities for the transesterification reactions, while 2-Ni has displayed a very slow conversion. The reactivities of the compounds used in this study are in the order of 5-Zn > 4-Zn > 6-Cd > 7-Mn ∼ 3-Cu > 1-Co > 2-Ni, indicating that the non-redox metal-containing compounds (5-Zn, 4-Zn, and 6-Cd) show better activity than the redox-active metal-containing compounds (7-Mn, 3-Cu, 1-Co, and 2-Ni). These results suggest that it is possible to tune the catalytic activities by changing from Zn to those metals such as Cd, a kinetically inert metal, or Cu, Mn, and Co, the redox-active metals.     

Improved solubilization of pyromellitic dianhydride and 4,4′-oxydianiline in ionic liquid by the addition of zwitterion and their polycondensation

Three different ionic liquids were prepared and examined as solvents for polyimide synthesis. The solubility of 4,4′-oxydianiline and pyromellitic dianhydride as starting materials in ionic liquids was first evaluated, and then their polycondensation was carried out. Although these starting materials were hardly soluble in 1-benzyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide (3), addition of imidazolium type zwitterion, 1-(1-butyl-3-imidazolio)butane-4-sulfonate (ZI), certainly improved their solubility. When 3 containing 40 mol % ZI was used, nothing was phase separated from this mixed solution containing both starting materials after cooling down to room temperature. After preparing prepolymer in 3 containing 40 mol % of ZI at room temperature, polycondensation was carried out in the same solution at 100, 200, and then 300 °C for every 1 h to obtain polyimide. An inherent viscosity of the obtained polyimide (0.05 g in 10 ml concentrated sulfuric acid) was 1.3 dL g⁻¹, higher than that prepared in only 3 (0.9 dL g⁻¹). The higher average molecular weight of the polyimide was attributed to the improved solubility of the starting materials by the addition of ZI that enabled the preparation of the prepolymer, poly(amide acid), without heating before imidation.     

Synthesis and crystal structure of three new copper(II) complexes with a tridentate amine and its Schiff bases

Three new mononuclear complexes of copper(II), viz. [Cu(L)(N₃)Cl] (1), [Cu(L′)(H₂O)]ClO₄ (2) and [Cu(L″)] (3) where L = N-(3-aminopropyl)-N-methylpropane-1,3-diamine, L′ = 2-(N-{3-[(3-aminopropyl)(methyl)amino]propyl}ethanimidoyl)phenolate ion and L″ = 2,2′-{(methylimino)bis[propane-3,1-diylnitrilo(1E)eth-1-yl-1-ylidene]}diphenolate ion, have been prepared. The synthesis of complex 1 has been achieved by reacting copper chloride with the triamine (L) and sodium azide in a 1:1:1 M ratio. The other two compounds have been synthesized by the reaction of copper perchlorate with the same triamine, L, plus 2-hydroxyacetophenone in a molar ratio of 1:1:1 (for 2) and 1:1:2 (for 3), so that the respective tetradentate and pentadentate Schiff bases HL′ and H₂L″ are formed in situ to bind the copper(II) ions. The complexes have been characterized by microanalytical, spectroscopic and single crystal X-ray diffraction studies. Structural studies reveal that the mononuclear units of all the three complexes adopt a distorted square pyramidal geometry and are held together by either intermolecular H-bonding (in 1 and 2) or C-H?π interactions (in 3) to form supramolecular networks in the solid state.     

Design and synthesis of fluorescent 6-aryl[1,2-c]quinazolines serving as selective and sensitive ‘on-off’ chemosensor for Hg in aqueous media

Three fluorescent quinazolines thiophen-2-yl-5,6-dihydrobenzo-[4,5]imidazo[1,2-c]quinazoline (1), pyridin-3-yl-5,6-dihydrobenzo-[4,5]imidazo-[1,2-c]quinazoline (2) and phenyl-5,5′,6,6′-dihydrobenzo-[4,4′,5,5′]imidazo-[1.1′,2-c,2′-c]quinazoline (3) have been synthesized. Structures of 1 and 3 have been authenticated crystallographically. Quinazolines 1-3 exhibit highly selective ‘on-off’ switching for Hg²⁺ ions. The fluorescence intensity displayed a linear relationship with respect to Hg²⁺ concentration (0.1-1.0 μM; R² = 0.99) with detection limit of 2.0 × 10⁻⁷ M.     

Novel organosoluble and colorless poly(ether imide)s based on 1,1-bis[4-(3,4-dicarboxyphenoxy)phenyl]cyclohexane dianhydride and trifluoromethyl-substituted aromatic bis(ether amine)s

A series of novel fluorinated poly(ether imide)s (IV) having inherent viscosities of 0.70-1.08 dL/g were prepared from 1,1-bis[4-(3,4-dicarboxyphenoxy)phenyl]cyclohexane dianhydride (I) and various trifluoromethyl (CF₃)-substituted aromatic bis(ether amine)s II_a-g by a standard two-step process with thermal and chemical imidization of poly(amic acid) precursors. These poly(ether imide)s showed excellent solubility in many organic solvents and could be solution-cast into transparent, flexible, and tough films. These films were essentially colorless, with an ultraviolet-visible absorption edge of 375-380 nm and a very low b^∗ value (a yellowness index) of 5.5-7.3. They also showed good thermal stability with glass-transition temperatures of 207-269 °C, 10% weight loss temperatures in excess of 474 °C, and char yields at 800 °C in nitrogen more than 62%. In comparison with analogous V series poly(ether imide)s without the -CF₃ substituents, the IV series polymers showed better solubility, lower color intensity, and lower dielectric constants.     

Optically active pentacyclic binuclear diorganotin compounds

Three optically active binuclear diorganotin compounds (2-4) were prepared from an optically active oxalamide: (1S,2R)-(−)-[N-(2-hydroxy-1-methyl-2-phenyl-ethyl)-N′-(2-hydroxy-phenyl)-oxalamide (1). The new compounds [1-(2′,2′-diorganyl-1′-oxa-3′-aza-2′-stanna-indan-3′-yl)-2-(2″,2″-diorganyl-4″-methyl-5″-phenyl[1,3,2]-oxazastannolidin-3″-yl)-ethane-1,2-dione {organyl = methyl (2), n-butyl (3) or phenyl (4)} were characterized by IR, elemental analysis and mass spectrometry. Compounds 3 and 4 were submitted to a detailed NMR study in order to assign their resonances (¹H and ¹³C) and specially the two different ¹¹⁹Sn signals for each compound. The X-ray diffraction analysis of compound 4 showed a planar pentacyclic framework with two penta-coordinated tin atoms with a distorted tbp geometry and 12 intramolecular hydrogen bonds.     

On- and off column enantiomerization of 4,4′-bisquinolin-2-ones: A comparison of Auto-, DHPLcy2k and DCXplorer calculated thermodynamic data generated by dynamic high,performance liquid chromatography with theoretically calculated data

Fast semipreparative HPLC enantioseparation of four axially chiral biscarbostyrils (4,4′-bisquinoline-2-ones) using ULMO as a π-acidic Pirkle type chiral stationary phase leads to two racemizing pairs (1,2; k_obs 1.6 × 10⁻⁴ and 3.0 × 10⁻⁴ s⁻¹ at 28 °C) and two stable ones (3,4). 3 was stabilized by a crown ether linkage from pos. 6 to 6′, and 4 had sterically demanding bromo substituents in pos. 3 and 3′. On-column generated temperature-dependent chromatograms of 1 and 2 were fitted with Auto-DHPLCy2k and DCXplorer. For cpd 2 both programs delivered similar ΔG values of 90 and 93 kJ/mol, well comparable with the 99 kJ/mol calculated with the B3LYP/6-31G (d) procedure. At temperatures of high conversion DCXplorer delivered inconsistent series of rate constants for the more tailing and less resolved tetramethoxy derivative 1. We connect this problem with an almost impossible halfwidth calculation of tailing peak pairs which are weakly resolved. However, this problem could be observed only in the case of tetramethoxy derivative 1. Stochastic generated data of Auto-DHPLCy2k could be used at a lower percentage of conversion only while the theoretical plate model did not deliver useful data at temperatures of very low conversion but fitted well high conversion chromatogram series of 1 and 2.     

Synthesis and nonlinear optical properties of novel Y-type polyimides with enhanced thermal stability of dipole alignment

2,3-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4′-nitrostilbene dianhydride (4) was prepared and reacted with 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-diaminobenzanilide and 4,4′-(hexafluoroisopropylidene)dianiline to yield novel polyimides 5-8 containing 2,3-dioxynitrostilbenyl groups as NLO-chromophores, which constituted parts of the polymer backbones. The resulting polyimides 5-8 were soluble in polar solvents such as acetone and DMF. Polymers 5-8 showed a thermal stability up to 300 °C in TGA thermograms with T_g values obtained from DSC thermograms in the range of 135-160 °C. The SHG coefficients (d₃₃) of poled polymer films at the 1064 cm⁻¹ fundamental wavelength were around 5.26 × 10⁻⁹ esu. The dipole alignment exhibited exceptionally high thermal stability even at 30 °C higher than T_g and there was no SHG decay below 170-190 °C due to the partial main chain character of polymer structure, which was acceptable for NLO device applications.     

Oligofluorene-based push-pull type functional materials for blue light-emitting diodes

A series of new oligofluorene-based push-pull type blue light-emitting functional materials, namely, 2-(9H-carbazole-9-yl)-7-(4-cyanophenyl)-9,9-dihexylfluorene (F1), 7-(9H-carbazol-9-yl)-7′-(4-cyanophenyl)-2,2′-bi(9,9-dihexylfluorene) (F2), 7-(9H-carbazole-9-yl)-7″-(4-cyanophenyl)-2,2′:7′,2″-ter(9,9-dihexylfluorene) (F3), and 7-(9H-carbazole-9-yl)-7″′-(4-cyanophenyl)-2,2′:7′,2″:7″,2″′-quarter(9,9-dihexylfluorene) (F4) were synthesized and characterized. Their onset decomposition temperatures for the thermal bond cleavage and the glass-transition temperatures were in general increased with increasing number of fluorene units. In dilute toluene solution, the oligofluorenes exhibited main absorption peaks in the range of 343-370 nm, photoluminescence maxima from 403 to 410 nm, and absolute quantum yields (Φ_PLs) of higher than 87%. In contrast, the absorption spectra of these compounds in the thin films had no large differences from those in the solutions except for the slight peak red-shifts (2-8 nm). The main emission maxima of F1, F2, and F3 in the thin films were located at 418-420 nm, while the main emission of F4 was found to be shifted to 446 nm, followed by a shoulder peak at 421 nm. The Φ_PLs of these thin films were estimated in the range of 59.2-68.7%. The existence of the electron-pull and -push end groups could effectively tune the energy levels of the oligofluorenes. By using the organic light emitting device (OLED) configuration of ITO/PEDOT:PSS/oligofluorenes/TPBi/LiF/Al by solution-process, F4 displayed the best performance: the lowest turn-on voltage (4.1 V) and highest maximum luminance (2180 cd/m²) with maximal current efficiency of 1.17 cd/A. When F4 was fabricated into the optimized device of ITO/MoO₃/NPB/CBP:F4(1:4)/TPBi/LiF/Al by vapor deposition, highest brightness of 5135 cd/m² and current efficiency of 1.76 cd/A were achieved with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.16, 0.09).     

Hydride addition at μ-vinyliminium ligand obtained from disubstituted alkynes

New μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = R″ = Me, 3a; R = Me, R′ = R″ = Et, 3b; R = Me, R′ = R″ = Ph, 3c; R = CH₂Ph, R′ = R″ = Me, 3d; R = CH₂Ph, R′ = R″ = COOMe, 3e; R = CH₂ Ph, R′ = SiMe₃, R″ = Me, 3f) have been obtained b yreacting the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2a-f) with NaBH₄. The formation of 3a-f occurs via selective hydride addition at the iminium carbon (C_α) of the precursors 2a-f. By contrast, the vinyliminium cis-[Fe₂{μ-η¹:η³-C_γ (R′) = C_β(R″)C_α = N(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R′ = R″ = COOMe, 4a; R′ = R″ = Me, 4b; R′ = Prⁿ, R″ = Me, 4c; Prⁿ = CH₂CH₂CH₃, Xyl = 2,6-Me₂C₆H₃) undergo H⁻ addition at the adjacent C_β, affording the bis-alkylidene complexes cis-[Fe₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (5a-c). The cis and trans isomers of [Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4d) react differently with NaBH₄: the former reacts at C_α yielding cis-[Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], 6a, whereas the hydride attack occurs at C_β of the latter, leading to the formation of the bis alkylidene trans-[Fe₂{μ-η¹:η²-C(Et)C(H)(Et)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (5d). The structure of 5d has been determined by an X-ray diffraction study. Other μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (R′ = R″ = Ph, 6b; R′ = R″ = Me, 6c) have been prepared, and the structure of 6c has been determined by X-ray diffraction. Compound 6b results from treatment of cis-[Fe₂{μ-η¹:η³-C_γ(Ph)C_β(Ph)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4e) with NaBH₄, whereas 6c has been obtained by reacting 4b with LiHBEt₃. Both cis-4d and trans-4d react with LiHBEt₃ affording cis-6a.