Kinetic modeling of two-step RAFT process for the production of novel fluorosilicone triblock copolymers

Well-defined poly(dimethylsiloxane)-b-poly(2,2,3,3,4,4,4-heptafluorobutylmethacryl-ate-b-poly(styrene) (PDMS-b-PHFBMA-b-PS) triblock copolymers were prepared by two-step reversible addition-fragmentation chain transfer (RAFT) polymerization. A comprehensive mathematical model for the two-step RAFT polymerization in a batch reactor was presented using the method of moments. The model described molecular weight, monomer conversion and polydispersity index as a function of polymerization time. Good agreements in the polymerization kinetics were achieved for fitting the kinetic profiles with the suggested model. In addition, the model was used to predict the effects of initiator concentration, chain transfer agent concentration and monomer concentration on the two-step RAFT polymerization kinetics. The simulated results showed that for the two-step RAFT polymerizations, the effects initiator concentration, chain transfer agent concentration and monomer concentration are identical and the influence degrees are different yet.     

Synthesis and micellar characterization of thermosensitive amphiphilic poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) block copolymers

Poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) (PCL-b-PVCL) block copolymers were synthesized as new biocompatible, thermosensitive, amphiphilic block polymers by a combination of ring-opening polymerization and reversible addition–fragmentation chain transfer (RAFT) polymerization, and their thermosensitive micellar behavior was examined. The PCL macro-chain-transfer agent was first synthesized by converting the end group of PCL-OH to O-ethyl xanthate, which was subsequently used for the RAFT polymerization of N-vinylcaprolactam. The critical micelle concentration of PCL-b-PVCL (M _n,NMR?=?56,300?g/mol, polydispersity index?=?1.18) was 0.026?mg/mL. The mean diameter of the PCL-b-PVCL micelles determined by transmission electron microscopy was 55?±?25?nm. The PCL-b-PVCL micelles exhibited repetitive aggregation and dispersion during reversible cooling and heating cycles between 20 and 40?°C due to the thermosensitive behavior of the PVCL shell. Overall, the PCL-b-PVCL block copolymers have potential applications in thermosensitive drug delivery applications.     

Preparation and drug release property of CO2 stimulus-sensitive poly(N, N-dimethylaminoethyl methacrylate)-b-polystyrene nanoparticles

The CO₂ stimulus-sensitive nanoparticles based on poly(N, N-dimethylaminoethyl methacrylate)-b-poly styrene (PDMAEMA-b-PS) were prepared via surfactant-free miniemulsion reversible addition–fragmentation chain transfer (RAFT) polymerization. The as-prepared nanoparticles exhibited core–shell structure with about 120 nm in diameter. Their dispersion/aggregation in water can be adjusted by alternatively bubbling of CO₂ and N₂. Drug release from these nanoparticles can be accelerated (or delayed) by bubbling (or removing) of CO₂.     

Nanocomposites of polystyrene-b-polyisoprene copolymer with layered silicates and carbon nanotubes

Nanocomposites of polystyrene-b-polyisoprene (PS-b-PI) copolymer with layered-smectite clays (organically modified montmorillonite) and nanostructured clay-carbon nanotube hybrids were prepared. The diblock copolymer was synthesized by anionic polymerization using high-vacuum techniques and was molecularly characterized by size exclusion chromatography. Carbon nanotubes were developed on clay-supported nickel nanoparticles by the CCVD method. Nanotubes attached on the clay platelets were then chemically modified to create ester groups on their surfaces. PS-b-PI nanocomposites at various polymer to reinforcement loadings were prepared by solution intercalation. The final nanocomposites were characterized by powder X-ray diffraction, FT-IR spectroscopy, thermal analysis, and scanning electron microscopy. The experiments complemented with viscometry measurements reveal the successful incorporation of the reinforcements in the polymer mass.     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

Surface structure of thin asymmetric PS-b-PMMA diblock copolymers investigated by atomic force microscopy

Asymmetric poly(styrene-b-methyl methacrylate) (PS-b-PMMA) diblock copolymers of molecular weight M_n = 29,700 g mol⁻¹ (M_PS = 9300 g mol⁻¹M_PMMA = 20,100 g mol⁻¹, PD = 1.15, χ_PS = 0.323, χ_PMMA = 0.677) and M_n = 63,900 g mol⁻¹ (M_PS = 50,500 g mol⁻¹, M_PMMA = 13,400 g mol⁻¹, PD = 1.18, χ_PS = 0.790, χ_PMMA = 0.210) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Atomic force microscopy (AFM) was used to investigate the surface structure of thin films, prepared by spin-coating the diblock copolymers on a silicon substrate. We show that the nanostructure of the diblock copolymer depends on the molecular weight and volume fraction of the diblock copolymers. We observed a perpendicular lamellar structure for the high molar mass sample and a hexagonal-packed cylindrical patterning for the lower molar mass one. Small-angle X-ray scattering investigation of these samples without annealing did not reveal any ordered structure. Annealing of PS-b-PMMA samples at 160 °C for 24 h led to a change in surface structure.     

Synthesis of poly(vinyl acetate)-b-poly(4-vinylpyridine) block copolymers by a combination of cobalt-mediated radical polymerization and RAFT polymerization and their use in dispersion polymerization under UV radiation

Well-defined poly(vinyl acetate)-block-poly(4-vinylpyridine) (PVAc-b-P4VP) block copolymers were synthesized for the first time by a combination of cobalt-mediated radical polymerization (CMRP) and reversible addition–fragmentation chain transfer (RAFT) polymerization, and were used to prepare PVAc-b-P4VP hairy polystyrene (PSt) particles. PVAc end-capped by a cobalt(II) acetylacetonate complex was first synthesized by the CMRP of vinyl acetate, after which the cobalt complex was modified into a dithiobenzoate group for the RAFT polymerization of 4-vinylpyridine. The hairy PSt particles were synthesized by the dispersion polymerization of St using the PVAc-b-P4VP as both a macro-initiator and a colloidal stabilizer under UV radiation. The average size of PSt particles synthesized with 20 wt.% of PVAc-b-P4VP (M _n = 39,500 g/mol) was 136 nm (CV = 19.2%). Very small Au nanoparticles were successfully immobilized on the surface of the PSt particles.     

Synthesis and Characterization of Poly(methyl methacrylate)-b-Polystyrene/TiO2 Nanocomposites Via Reversible Addition-Fragmentation Chain Transfer Polymerization

A diblock copolymer, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), was grafted onto the surface of nano-titania (nano-TiO₂) successfully via reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of TiO₂ nanoparticles was modified initially by attaching dithioester groups to the surface using silane coupling agent 3-(chloropropyl)triethoxy silane and sodium ethyl xanthate. The polymerization of methyl methacrylate and styrene were then initiated and propagated on the TiO₂ surface by RAFT polymerization. The resulting composite nanoparticles were characterized by means of XPS, FT-IR, ¹H NMR and TGA. The results confirmed the successful grafting of poly(methyl methacrylate) (PMMA) and diblock copolymer chains onto the surface of TiO₂. The amount of PMMA grafted onto the TiO₂ surface increased with the polymerization time. Moreover, the kinetic studies revealed that the ln([M]₀/[M]), where [M]₀ is the initial and [M] is the time dependent monomer concentrations, increased linearly with the polymerization time, indicating the living characteristics of the RAFT polymerization.     

Stepwise dansyl grafting on the kaolinite interlayer surface

A block copolymer (PS-b-poly(l-Glu)) composed of polystyrene and poly(l-glutamic acid) was used as a stabilizer for dispersion polymerization of styrene. When dispersion polymerization of styrene was conducted at 70 °C in 80% dimethylformamide-water with 0.5 wt% PS-b-poly(l-Glu), spherical polystyrene particles with D_n = 0.72 μm and narrow size distribution were obtained. Whereas AIBN concentration did not have any effects on particle size, molecular weight of the polystyrene particles was strongly dependent on the initiator concentration. As concentration of the PS-b-poly(l-Glu) increased from 0.2 to 1.0 wt%, particle size decreased from D_n = 0.91 to 0.69 μm with keeping surface area occupied by one poly(l-glutamic acid) chain about S = 50 nm². On the other hand, an increase in initial concentration of styrene from 2 to 20 wt% caused an increase in particle size from D_n = 0.48 to 1.36 μm and a decrease in surface area per poly(l-glutamic acid) block from S = 91 to 45 nm². Colloidal stability of the polystyrene particles in aqueous solution was responsive to pH due to the surface-grafted poly(l-glutamic acid). For dispersion polymerization of styrene, the PS-b-poly(l-Glu) functions as both a stabilizer and a surface modifier.     

Reaction-induced microphase separation in epoxy resin containing polystyrene-block-poly(ethylene oxide) alternating multiblock copolymer

Polystyrene-block-poly(ethylene oxide) alternating multiblock copolymer (PS-alt-PEO) was synthesized with the combination of atom transfer radical polymerization (ATRP) and Huisgen 1,3-dipolar cycloaddition (i.e., click chemistry). The copolymer has been characterized by means of Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The PS-alt-PEO alternating multiblock copolymer was incorporated into epoxy resin to investigate the behavior of reaction-induced microphase separation, which has been compared to the case of the thermosets containing PS-b-PEO diblock copolymer. The morphology of epoxy thermosets containing PS-alt-PEO alternating multiblock copolymer were investigated by means of atomic force microscopy (AFM), and small-angle X-ray scattering (SAXS) and the nanostructures were detected in all the thermosetting blends investigated. In marked contrast to the case of the thermosets containing PS-b-PEO diblock copolymer, the thermosets containing PS-alt-PEO multiblock copolymer displayed disordered nanostructures, which have been interpreted on the basis of the restriction of the alternating multiblock topology of the block on the formation of the nanostructures via reaction-induced microphase separation.     

Synthesis and characterization of polystyrene-b-tetraaniline stars from polystyrene stars with surface reactive groups prepared by RAFT polymerization

Functionalized star polymers with tetraaniline on their surface have been successfully prepared by substitution reaction of N-succinimidyl-terminated star polymers with tetraaniline. A novel functional RAFT agent bearing N-succinimidyl group was used in the RAFT polymerization of styrene, and N-succinimidyl groups-terminated polystyrenes with narrow molecular weight distribution were obtained. The star polymers with reactive N-succinimidyl groups on their surface were synthesized via RAFT polymerization of DVB. Polymerization mechanism study by gel permeation chromatography displayed that complete disappearance of linear polymers in the products is difficult. The N-succinimidyl-terminated PSt, polymer stars with surface N-succinimidyl groups and the PSt-b-tetraaniline stars were characterized by ¹H NMR spectroscopy, FT-IR and GPC.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Microwave-assisted Claisen rearrangement of naphthyl 2-propynyl ethers: synthesis of naphthofurans

An efficient two-step approach for the synthesis of naphtho[1,2-b]furans and naphtho[2,1-b]furans has been developed. Various functionalized propargyl alcohols were etherified with α- or β-naphthol under Mitsunobu reaction conditions to give naphthyl 2-propynyl ethers, which underwent a facile microwave-assisted Claisen rearrangement and concomitant anionic cyclization to yield naphthofuran derivatives under basic reaction conditions.     

Effect of poly(4‑tert-butylstyrene) block length on the microphase structure of poly(ethylene oxide)-b-poly(4-vinylbenzyl chloride)-b-poly(4‑tert-butylstyrene) triblock terpolymers

A series of linear poly(ethylene oxide)-b-poly(4-vinylbenzyl chloride)-b-poly(4‑tert-butylstyrene) (PEO₁₁₃-b-PVBC₁₃₀-b-PtBS_x or E₁₁₃V₁₃₀T_x) triblock terpolymers with various lengths x (=20, 33, 66, 104, 215) of PtBS block were synthesized via a two-step reversible addition-fragmentation chain transfer (RAFT) polymerization. The E₁₁₃V₁₃₀T_x triblock terpolymers were non-crystalline because the PVBC and PtBS blocks strongly hindered the crystallization of PEO block. The effects of PtBS block length x on the phase structures of E₁₁₃V₁₃₀T_x triblock terpolymers were investigated by combined techniques of small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). It was found that with increasing x from 20 to 215, the phase structure of E₁₁₃V₁₃₀T_x triblock terpolymers became more ordered and changed from disordered structure, hexagonally-packed cylinder (HEX), hexagonally perforated layer (HPL), to lamellar (LAM) phase structures. Temperature-variable SAXS measurements showed that the HEX, HPL and LAM phase structures obtained for E₁₁₃V₁₃₀T₆₆, E₁₁₃V₁₃₀T₁₀₄ and E₁₁₃V₁₃₀T₂₁₅ by thermal annealing, respectively, were thermodynamically stable in the temperature range of 30–170 °C.     

Facile synthesis of regio-isomeric naphthofurans and benzodifurans

Naphtho[1,2-b]furans 1a-f, naphtho[2,1-b]furans 2a-f, benzo[1,2-b:5,4-b′]difurans 3a-b, benzo[1,2-b:4,5-b′]difurans 4a-b, and benzo[1,2-b:4,3-b′]difurans 5a-b were synthesized by base-catalyzed cyclization reaction of the corresponding o-alkoxybenzoylarene derivatives. The o-alkoxybenzoylarenes were obtained from the etherification reaction of the o-hydroxybenzoylarenes, which were prepared either by the reaction of methoxyarenes with benzoyl chloride in the presence of aluminum chloride or by photo-Fries rearrangement of aryl benzoates.     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Novel electrospun poly(ε-caprolactone)-based bicomponent nanofibers possessing surface enriched in tertiary amino groups

For the first time preparation of electrospun poly(ε-caprolactone) (PCL) based nanofibers possessing surface enriched in tertiary amino groups is shown. For that purpose the pair PCL and poly(ε-caprolactone)-b-poly[(2-dimethylamino)ethyl methacrylate] (PCL-b-PDMAEMA) diblock copolymers was used. PCL-b-PDMAEMA copolymers were synthesized using a combination of ring-opening polymerization and atom transfer radical polymerization (ATRP). Nanofibers with mean diameters ranging from 400 to 800 nm were obtained. Their morphology was evaluated by scanning electron (SEM) and atomic force microscopy (AFM). It was found that the morphology of the fibers depended on the weight ratio between the partners and the length of the PDMAEMA-block in the copolymers. The enrichment of the fiber surface in tertiary amino groups was studied by X-ray photoelectron spectroscopy (XPS). Increasing the copolymer content and the length of the PDMAEMA-block led to increase of the amount of tertiary amino groups on the fiber surface. The AFM analyses of the mechanical properties of the fiber surface showed that increasing the copolymer content led to decrease of the surface stiffness. The increase of the copolymer content led also to decrease of the melting temperature and the crystallinity degree in respect to PCL from the (co)polymer as determined by differential scanning calorimetry.     

Micellization and gelation of the double thermoresponsive ABC-type triblock copolymer synthesized by RAFT

A double thermoresponsive ABC-type triblock copolymer(poly(ethyleneglycol)-block-poly(2-(2-methoxyethoxy) ethyl methacrylate)-block-poly(2-(2-methoxy ethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate, PEG-b-PMEO_2MA-b-P(MEO_2MA-co-OEGMA)) was designed and synthesized by reversible additionfragmentation chain transfer polymerization(RAFT). The ABC-type triblock copolymer endowed a thermal-induced twostep phase transition at 29 and 39 °C, corresponding to the thermosensitive properties of PMEO_2 MA and P(MEO_2MA-coOEGMA) segments, respectively. The two-step self-assembly of copolymer solutions was studied by UV transmittance measurement, dynamic light scattering(DLS), transmission electron microscopy(TEM) and so on. The triblock copolymers showed the distinct thermosensitive behavior with respect to transition temperatures, aggregate type and size, which was correlated to the degree of polymerization of thermosensitive blocks and the molar fraction of OEGMA in the P(MEO_2MAco-OEGMA) segments. In addition, micelles could further aggregate to form the hydrogel by the self-associate of PEG chains under the abduction of the concentration and temperature. The transition from sol to gel was investigated by a test tube inverting method and dynamic rheological measurement.     

Novel organotin-containing diblock copolymer with tunable nanostructures: Synthesis, self-assembly and morphological change

Interesting self-assembly behavior and morphological change of a novel organotin-containing diblock copolymer were firstly reported. The organotin-containing diblock copolymer, poly(methyl methacrylate)-block-poly(acetoxydibutyltin methacrylate) (PMMA-b-PADBTMA), was prepared via RAFT polymerization of ADBTMA with PMMA as the macroCTA and AIBN as the initiator in toluene. Both the FT-IR and TG analysis revealed an incorporation of both co-monomers in the resulted polymer backbone. The ratio of two segments was determined indirectly by TG analysis, gravimetric method and derivative process. All results from the different methods were well matched. And it was found that the morphology of the diblock copolymer could be changed easily from vesicles to nano-particle or cross-linked nano-composite under the ultrasonication or additional Ph₂SnCl₂, respectively. All the morphologies were analyzed by SEM, TEM and DLS. The self-assembly and the morphological change attributed to the strong coordination action between tin atoms and the carbonyl groups among PADBTMA segments.     

The doubly thermo-responsive triblock copolymer nanoparticles prepared through seeded RAFT polymerization

The doubly thermo-responsive triblock copolymer nanoparticles of polystyrene-block-poly(N-isopropylacrylamide)-block-poly[N,N-(dimethylamino) ethyl methacrylate] (PS-b-PNIPAM-b-PDMAEMA) are successfully prepared through the seeded RAFT polymerization in situ by using the PS-b-PNIPAM-TTC diblock copolymer nanoparticles as the seed. The seeded RAFT polymerization undergoes a pseudo-first-order kinetics procedure, and the molecular weight increases with the monomer conversion linearly. The hydrodynamic diameter (D _h) of the triblock copolymer nanoparticles increases with the extension of the PDMAEMA block. In addition, the double thermo-response behavior of the PS-b-PNIPAM-b-PDMAEMA nanoparticles is detected by turbidity analysis, temperature-dependent 1H-NMR analysis, and DLS analysis. The seeded RAFT polymerization is believed as a valid method to prepare triblock copolymer nanoparticles containing two thermo-responsive blocks.