Validated Stability-Indicating Chromatographic Method for the Assay of Erlotinib Active Pharmaceutical Ingredient

Abstract

A simple stability-indicating high-performance liquid-chromatographic (HPLC) method for the assay of erlotinib in the presence of its degradation products was developed on a C18 column using a mobile phase of 0.01 M ammonium formate–acetonitrile–containing formic acid with a flow rate of 1.0 mL min^?1. The method was validated. Selectivity was validated by subjecting the stock solution of erlotinib to acidic, basic, photolysis, oxidative, and thermal degradation. The linearity range and values for limits of detection (LOD) and quantification (LOQ) were found to be 1–198, 0.33, and 1.1 µg mL^?1, respectively. The analysis of the tablets containing erlotinib was quite precise (relative standard deviation <1%).     

Method development and validation study for quantitative determination of nifedipine and related substances by ultra‐high‐performance liquid chromatography

A novel stability‐indicating reversed phase ultra‐high performance liquid chromatography (UPLC) coupled photodiode array gradient method was developed for determination of the nifedipine and related compounds. Furthermore, based on the chromatographic conditions and forced degradation studies performed through the development of the related substances method a UPLC isocratic method was validated for the determination of the assay of this active substance. An Acquity Shield RP₁₈ (50 × 3.0 mm 1.7 µm) column was used for separation of nifedipine and its five potential impurities within 11 min, which is 5‐fold less than the official method. A mobile phase consisting of 10 mm ammonium formate (pH 4.5) and methanol, delivered at a flow rate 0.5 mL/min, was employed to achieve a minimum resolution of 2.0 for all consecutive pairs of compounds. The precision value expressed as percentage relative standard deviation for method repeatability and reproducibility was <5.0%. The recoveries for all the related compounds were in the range of 99–105.0%. Linearity was found to be acceptable over the concentration range of 0.25–1.5 µg/mL for nifedipine and its impurities. The limit of quantification for nifedipine was 0.05 µg/mL, which is much less than the European Pharmacopoeia method. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of Evans blue as a blood–brain barrier integrity tracer in plasma and brain tissue by UHPLC/UV method

Blood–brain barrier changes are an integral part of many neurodegenerative diseases. Evans blue is an intravital dye that binds to albumin and can therefore be used to monitor extravasation of this plasma protein across blood–brain barrier in animal models of neurodegeneration. To monitor extravasation of albumin across blood–brain barrier, we developed and validated an ultrahigh-performance liquid chromatography method for the analysis of Evans blue in rat plasma and brain samples. Analyte was separated on ACQUITY UPLC BEH C18 column (2.1?mm?×?50?mm) using a 5-min gradient run and detected by a UV detector. The limits of quantification (LOQ) were 10?µg/mL in plasma and 0.5?µg/g in brain samples. The limits of detection (LOD) were 1?µg/mL in plasma and 0.015?µg/g in brain samples. The method showed excellent linearity with regression coefficients higher than 0.99. The accuracy was within the range of 91–105%. The inter-day precision was in the range of 1.3–8%. The benefits of using UPLC are selectivity, short analysis period, and thus, a very good sample throughput. Using this method, we analyzed albumin extravasation across blood–brain barrier in transgenic rat model for tauopathy SHR-72 and age-matched control animals.     

Separation,determination of six impurities in methotrexate drug substance using ultra-performance liquid chromatography

Methotrexate(MTX) is an antineoplastic therapeutic medicine as antimetabolite of folic acid. In this paper, a sensitive and rapid ultra-performance liquid chromatographic(UPLC) method was developed and validated for the separation and determination of impurities in MTX drug substances. The UPLC method was accomplished on an Agilent Zorbax Extend C-18(50 mm 4.6 mm, 1.8 mm) with a gradient elution system composed of sodium dihydrogen phosphate in water(20 mmol/L, pH 3.0) and acetonitrile. The flow rate was 2.2 mL/min. The method was validated. The calibration curves displayed good linearity(r 0.999) within the tested concentration ranges. The limit of detection(LOD) and limit of quantification(LOQ) of the six analytes were all less than 0.774 mg/mL and 1.03 mg/mL. The relative standard deviation(RSD) for intra- and inter-day precision of the six analytes was less than 9.8%, including at the LOQ. The average recovery ranged from 95.2% to 103% except at the LOQ, where recovery ranged from 82.7% to 117%. The validated method was successfully used to determine the relative abundance of six impurities in the MTX drug substances.     

A stability indicating assay method for cefuroxime axetil and its application to analysis of tablets exposed to accelerated stability test conditions

Cefuroxime axetil is the esterified form of cefuroxime, injectable second generation cephalosporine antibiotic that can be given orally. Stereo and structural isomers of cefuroxime axetil (CA), anti-cefuroxime axetil (ACA) and Delta(3)-cefuroxime axetil (DCA), can be present in cefuroxime dosage forms as the process related impurities as well as possible degradation product. Sensitive and precise reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated for the determination of cefuroxime axetil in the presence of its degradation products in solid dosage forms. The RSD values for cefuroxime axetil, anti-cefuroxime axetil and Delta(3)-cefuroxime axetil of 1.80, 1.99 and 2.48%, respectively, indicated a good precision of the RP-HPLC method. Developed RP-HPLC method was sensitive with LOD = 0.08 microg mL(-1) and LOQ = 0.60 microg mL(-1) for anti-cefuroxime axetil and LOD = 0.06 microg mL(-1) and LOQ = 0.45 microg mL(-1) for Delta(3)-cefuroxime axetil. Holding studies were carried out on Ceroxim tablets, according to ICH regulation at 30 degrees C/60% relative humidity (RH) and 40 degrees C/75% RH for 1, 2, 3 and 6 months. The review data from the stability studies conducted, show the significant content change of Delta(3)-cefuroxime axetil.     

Solid-Phase Extraction Combined with UHPLC-MS/MS Method for Determination of Remifentanil in Human Whole Blood

A sensitive and reliable method have been developed and validated using solid phase extraction (SPE) combined with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) to determine remifentanil in human blood. Quantification was performed by external standard calibration (r = 0.9991, n = 5). Remifentanil was separated on an ACQUITY UPLC BEH C18 column (50 mm × 2.1 mm, 1.7 µm) and analyzed in positive-ion electrospray-ionization (ESI +) mode. The mobile phase was methanol and water with a gradient elution program. The total run time was 4.5 min and injection volume was 5 μL. Limit of detection (LOD) and limit of quantitation (LOQ) were 0.20 ng/mL and 0.60 ng/mL, respectively. Remifentanil was eluted at 1.89 min. Recoveries of remifentanil ranged between 91.88%–93.79%. The intra-day and the inter-day precision (RSD) for remifentanil were 2.51%–3.48% and 2.76%–3.78%, respectively. The performance of the method was successfully verified for the determination of remifentanil in human blood.     

Quantitative determination of bioactive alkaloids lysergol and chanoclavine in Ipomoea muricata by reversed-phase high-performance liquid chromatography

A rapid, simple, sensitive, gradient and reproducible, reverse‐phase high‐performance liquid chromatographic method was developed for the quantitative estimation of bioactive alkaloids, lysergol and chanoclavine in the seeds of Ipomoea muricata. The clavine alkaloid, lysergol, is a bioenhancer for the drugs and nutrients. The samples were analyzed by reverse‐phase chromatography on a Waters spherisorb ODS2 column (250 × 4.6 mm, i.d., 10 µm) using binary gradient elution with acetonitrile and 0.01 m phosphate buffer (NaH₂PO₄) containing 0.1% glacial acetic acid at a flow rate of 0.8 mL/min, a column temperature of 25 °C and UV detection at λ 254 nm. The limits of detection (LOD) and quantitation (LOQ) were 0.035 and 0.106 µg/mL for lysergol and 0.039 and 0.118 µg/mL for chanoclavine, respectively. Standard curves were linear in the range of 2–10 µg/mL (r > 99) for both analytes. Good results were achieved with respect to repeatability (RSD < 2%) and recovery (99.20–102.0). The method was validated for linearity, accuracy repeatability, LOQ and LOD. The method is simple, accurate and precise, and may be recommended for routine quality control analysis of I. muricata seed extracts containing these two clavine alkaloids (1, 2) as bioactive principles of the herb. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability Indicating Reversed-Phase High Performance Liquid Chromatography Method for Determination of Impurities in Ofloxacin Tablet Formulations

A gradient reversed-phase high performance liquid chromatography (RP-HPLC) method was developed for separation and quantitation of impurities in pharmaceutical dosage form of ofloxacin tablets. The developed method was a stability indicating test method for estimation of related impurities generated during synthesis, formulation, and storage of ofloxacin tablets. Forced degradation studies were performed on ofloxacin tablets including acid hydrolysis (5.0 M hydrochloric acid), base hydrolysis (5.0 M sodium hydroxide), oxidation (30% hydrogen peroxide), heat (105°C) humidity degradation 25°C/92% RH/119 b & 40 min, and photolytic degradation (2600 Lux/119 h & 40 min). From the degradation study, the degradation was found between 0–15%. Limit of detection and limit of quantification were established in terms of percentage for all potential impurities. The recovery studies were conducted on finished dosage samples (tablets) for all potential impurities and the average percentage recovery was ranged from 90.8 to 104.2. Placebo interference was verified by taking the placebo (composition of excipients) equivalent to weight in portion of test preparation and no interference was observed. The method was validated and found to be linear, accurate, precise, specific, robust, and reliable. The developed method was established in accordance to ICH guidelines.     

A validated stability‐indicating ultra performance liquid chromatography method for the determination of potential process‐related impurities in eplerenone

A simple, sensitive, and accurate stability‐indicating analytical method has been developed and validated using ultra high performance liquid chromatography. The developed method is used to evaluate the related substances of eplerenone (EP). The degradation behavior of EP under stress conditions was determined, and the major degradants were identified by ultra high performance liquid chromatography with tandem mass spectrometry. The chromatographic conditions were optimized using an impurity‐spiked solution, and the samples, generated from forced degradation studies. The resolution of EP, its potential impurities, and its degradation products was performed on a Waters UPLC BEH C₁₈ column (50 × 2.1 mm, 1.7 μm) by linear gradient elution using a mobile phase consisting of 10 mmol/L ammonium acetate adjusted to pH 4.5, methanol and acetonitrile. A photo‐diode array detector set at 245 nm was used for detection. The flow rate was set at 0.3 mL/min. The procedure had good specificity, linearity (0.02–3.14 μg/mL), recovery (96.1–103.9%), limit of detection (0.01–0.02 μg/mL), limit of quantitation (0.03–0.05 μg/mL), and robustness. The correction factors of the process‐related substances were calculated.     

Study the pharmacokinetics of AV-45 in rat plasma and metabolism in liver microsomes by ultra-performance liquid chromatography with mass spectrometry

An ultra‐performance liquid chromatography–tandem mass spectrometric (UPLC‐MS/MS) method was developed and validated to determine AV‐45 in rat plasma. After the addition of the internal standard benzophenone, plasma samples were pretreated by protein precipitation. Chromatographic separation was achieved on an Acquity UPLC BEH C₁₈ column (50 × 2.1 mm, 1.7 µm) by gradient elution at a flow rate of 0.4 mL/min. Detection of analytes and internal standard (IS) was done by tandem mass spectrometry, operating in positive‐ion and multiple reaction monitoring mode. The method was fully validated for its sensitivity, selectivity, accuracy and precision, matrix effect and stability study. The calibration curve showed good linearity over the concentration range 2.00–1000 ng/mL for AV‐45. Intra‐ and inter‐day precisions were less than 7.6%, and accuracy ranged from 100.6 to 107.8%. There was no matrix effect. The validated method was successfully applied to a pharmacokinetic study of AV‐45 in rats. Additionally, the metabolism of AV‐45 in rat liver microsomes was also studied by ultra‐performance liquid chromatography combined with time‐of‐flight mass spectrometry (UPLC/TOF‐MS). With the help of chromatographic behavior and accurate mass measurements, the metabolites were characterized. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of aripiprazole in rat plasma and brain using ultra-performance liquid chromatography/electrospray ionization tandem mass spectrometry

Aripiprazole is an important antipsychotic drug. A simple, sensitive and rapid ultra‐performance liquid chromatography/electrospray ionization tandem mass spectrometry (UPLC‐ESI‐MS/MS) method was developed and validated for the simultaneous quantification of this compound in rat plasma and brain homogenate. The analyte was extracted from rat plasma and brain homogenate using a weak cation exchange mixed‐mode resin‐based solid phase extraction. The compound was separated on an Agilent Eclipse Plus C₁₈ (2.1 × 50 mm, 1.8 µm) column using a mobile phase of (A) 0.1% formic acid aqueous and (B) acetonitrile with gradient elution. The analyte was detected in positive ion mode using multiple reaction monitoring. The method was validated and the specificity, linearity, limit of quantitation (LOQ), precision, accuracy, recoveries and stability were determined. The LOQ was 0.5 ng/mL for aripiprazole in plasma and 1.5 ng/g in brain tissue. The MS response was linear over the concentration range 0.5–100 ng/mL for aripiprazole in plasma and 1.5–300 ng/g in brain tissue. The precision and accuracy for intra‐day and inter‐day were better than 14%. The relative and absolute recoveries were above 72% and the matrix effects were low. This validated method was successfully used to quantify the rat plasma and brain tissue concentrations of the analyte following chronic treatment with aripiprazole. Copyright © 2012 John Wiley & Sons, Ltd.     

Stress Degradation Studies of Anagliptin,Development of Validated Stability Indicating Method,Degradation Kinetics Study,Identification and Isolation of Degradation Products

A gradient-specific stability indicating HPLC method was developed and validated for the determination of the antidiabetic agent anagliptin in laboratory mixtures. Reversed-phase chromatography was performed using a Shimadzu LC-20 AD pump (binary), Shimadzu PDA M-20A diode array detector, and Waters Symmetry C-18 column (150?×?4.6 mm, 3.5 µm) maintained at a column oven temperature of 40 °C with UV detection at 247 nm. A gradient program was run at flow rate of 1 mL min^?1. Mobile phase A consisted of a mixture of acetate buffer(10 mm) pH 5/methanol/acetonitrile in the ratio of 90:5:5. Mobile phase B consisted of a mixture of acetate buffer (10 mm) pH 5/methanol/acetonitrile in the ratio of 50:25:25. The method was validated according International Conference of Harmonization (ICH) guidelines. Linearity was observed in the concentration range of 10–120 µg/mL with regression coefficient r²(0.999). The LOD was found to be 7.8 µg/mL and LOQ was found to be 22.68 µg/mL. Anagliptin was subjected to stresses such as acidic, alkali, oxidation, photolysis, and thermal conditions. The proposed method was validated as per ICH guidelines and was found to be accurate, precise, and specific. The drug showed significant degradation in alkaline and oxidative conditions. Alkaline and oxidative degradation followed first-order kinetics. Degradation rate constant and half-lives were determined. Degradation products in alkaline and oxidative conditions were identified by LC–MS. One major degradation product was isolated from each condition by preparative HPLC. These degradation products were characterized by ¹H NMR, ¹³C NMR, DEPT, D₂O exchange, MS/MS, HRMS, and IR techniques. From the spectral data the alkaline degradation product was characterized as 1-{2-[1-(2-methylpyrazolo[1,5-a]pyrimidine-6-carboxamido)-methyl-propan-2-yl-amino]acetyl}pyrrolidine-2-carboxamide. The oxidative degradation product was characterized as N-[2-({2-[(2S)-2-cyanopyrrolidin-1-yl]-2-oxoethyl}amino)-2-methylpropyl]-2-methylpyrazolo-[1,5-a]pyrimidine-N-oxido-6-carboxamide.     

Simultaneous Determination of Fluoroquinolones, Tetracyclines and Sulfonamides in Chicken Muscle by UPLC–MS–MS

A rapid and sensitive analytical method for the simultaneous determination of four fluoroquinolones, four tetracyclines and six sulfonamides in chicken muscle using ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC–MS–MS) has been developed and validated. Samples were extracted with McIlvaine buffer-acetonitrile, defatted with n-hexane, and analyzed by UPLC–MS–MS. Solvent delay technique was applied in the analysis to remove the non-volatile phosphate and carry out farther on-line SPE clean-up. Satisfactory recoveries (55–110%) of all the veterinary drugs were demonstrated in 1, 10 and 20 μg kg^?1 spiked levels with the overall RSD for intra- and inter-day of 14 analytes less than 18%. The LOD and LOQ were 0.3 and 1.0 μg kg^?1, respectively. Quantitative results of 103 real samples indicated that the present method was suitable for the quantitative analysis of real samples.     

A Simple and Rapid CZE Determination of Tiapride Hydrochloride and Related Impurities in Pharmaceutical Formulations

A simple, fast, inexpensive capillary zone electrophoresis method for the separation and determination of tiapride hydrochloride and its two related impurities in pharmaceutical formulations has been developed and validated. The successful separation of these compounds was achieved in less than 3 min using a fused silica capillary and photodiode array detector at 218 nm. The best conditions were obtained using a 10 mM sodium tetraborate (pH 8.0) as the running buffer. The linear responses covered the ranges from 1.0 to 100 μg mL^?1 (R = 0.9989) for tiapride hydrochloride. The detection (LOD) and quantitation limits (LOQ) for tiapride hydrochloride were 2.7 and 9.0 μg mL^?1, respectively. The intra- and inter-day relative standard deviations for migration times and peak areas were less than 0.47 and 5.7%, respectively. The method was validated for the determination of tiapride hydrochloride in commercial tablets.     

Ion Chromatography with Post-column Reaction and Serial Conductivity and Spectrophotometric Detection Method Development for Quantification of Transition Metal Dissolution in Lithium Ion Battery Electrolytes

We present a method for the separation and determination of transition metals in electrolytes based on ion chromatography (IC) with post-column reaction (PCR) and serial conductivity and spectrophotometric detection. Three IC columns [Metrosep C4—250/4.0 (column A), Metrosep C6—250/4.0 (column B), and Nucleosil 100-5SA—250/4.6 (column C)] with different capacities, and stationary phases were used and compared with each other for method development. All spectrophotometric measurements were carried out with 4-(2-pyridylazo)resorcinol (PAR) as PCR reagent at a wavelength of 500 nm. To characterize the precision of the separation, the selectivity for the analysis of transition metals (nickel, cobalt, copper, and manganese) in the presence of large amounts of lithium and the resolution of the peaks were determined and compared with one another. Furthermore, the limits of detection (LOD) and quantification (LOQ) were determined for the transition metals. The LODs and LOQs determined by column C were as follows: cobalt (LOD/LOQ): 9.4 µg L^?1/31.3 µg L^?1, manganese (LOD/LOQ): 7.0 µg L^?1/23.5 µg L^?1, and nickel (LOD/LOQ): 6.3 µg L^?1/21.1 µg L^?1. Finally, the concentration of transition metal dissolution of the cathode material Li₁Ni_1/3Co_1/3Mn_1/3O₂ (NCM) was investigated for different charge cut-off voltages by the developed IC method.     

Static Headspace GC/MS Method for Determination of Methanol and Ethanol Contents,as the Degradation Markers of Solid Insulation Systems of Power Transformers

Methanol in insulating oil has been proposed as a new marker for condition assessment of the solid insulation system of power transformers. In the current work, as a first step of using the new marker, an analytical static headspace gas chromatography/mass spectrometry method has been developed, optimized, and validated to measure methanol and ethanol contents in the insulating mineral oil. The analyzing setup consists of a 6890 N gas chromatograph equipped with a 5973 network mass spectrometer (MS) in the absence of a costly headspace autosampler, and the chromatography separation was performed on a 60 m × 320 µm × 0.5 µm VF-WAXms GC column. Calibration curves have been provided using several concentrations of the alcohols, and also limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation percentage (RSD%) have been determined.     

Stability‐indicating HPLC assay for lysine–proline–valine (KPV) in aqueous solutions and skin homogenates

A simple, sensitive and stability‐indicating high‐performance liquid chromatographic (HPLC) assay method was developed and validated for a bioactive peptide, lysine–proline–valine (KPV) in aqueous solutions and skin homogenates. Chromatographic separation was achieved on a reversed phase Phenomenex C₁₈ column (4.6 × 250 mm, packed with 5 µm silica particles) with a gradient mobile phase consisting of 0.1% trifluoroacetic acid (TFA) in water (A) and 0.1% TFA in acetonitrile (B). The proposed HPLC method was validated with respect to accuracy, precision, linearity, repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The calibration curve was linear with a correlation coefficient (r) of 0.9999. Relative standard deviation values of accuracy and precision experiments were <2. The LOD and LOQ of KPV were 0.01 and 0.25 µg/mL, respectively. Under stress conditions (acid, alkali and hydrogen peroxide) KPV yielded lys–pro–diketopiperazine as major degradation product, which was identified by flow injection MS analysis. The developed HPLC method was found to be efficient in separating the active peptide from its degradation products generated under various stress conditions. Also, the validated method was able to separate KPV from other peaks arising from endogenous components of the skin homogenate. Copyright © 2014 John Wiley & Sons, Ltd.     

Quality control of modified xiaoyao san through the determination of 22 active components by ultra-performance liquid chromatography

A simple, sensitive, and reliable ultra-performance liquid chromatography (UPLC) method has been developed for simultaneous determination of 22 major constituents in modified xiaoyao san (MXS), a multiherbal formula. The chromatographic separation was performed on an ACQUITY UPLC BEH C18 column (150 x 2.1 mm, 1.7 microm, particle size), with an aqueous 0.5% acetic acid and acetonitrile mobile phase gradient. The method was validated for linearity (r2 >0.9937), intraday and interday precision (RSD <8.51%), recovery (91.18-107.73%), LOD (0.02-4.17 ng/mL), and LOQ (0.05-12.50 ng/mL). The established method was successfully applied to quantify the 22 marker compounds in MXS, which provided a useful basis of overall evaluation of the quality of MXS.     

Multiresidue GC-MS/MS pesticide analysis for evaluation of tea and herbal infusion safety

ABSTRACT

A fast, simple, low-cost and high-throughput multiresidue pesticide analysis method was developed and validated for 300 pesticides in herbal and fruit infusion samples based on modified QuEChERS (quick, easy, cheap, effective, rugged and safe) procedure combined with gas chromatography coupled with tandem mass spectrometry method (GC-MS/MS). The objectives were to develop low cost GC-MS/MS method, validate the method in accordance to SANTE/11,813/2017 guidance document and application in routine. The results obtained using different GC and MS/MS parameters were evaluated in order to develop quick, robust, accurate and effective multiresidue method. Total analysis time was 28 min with 0.6 µL injection volume. For accurate quantification, matrix-matched calibration (MMC) curves (in range of 10 µg/kg – 250 µg/kg) were applied to compensate matrix effect. The limits of quantification (LOQ) were ranged between 0.06 µg/kg and 135 µg/kg, and for the majority of the pesticides the LOQ were below the regulatory maximum residue limits. Most recoveries at 10 µg/kg and 100 µg/kg were in the range 70%–120% indicating satisfactory accuracy. The validated method was applied to commercial herbal and fruit infusion products detecting chlorpyriphos, DEET, tebuconazole, terbuthylazine, piperonyl butoxide, biphenyl, pendimethalin, pirimiphos-methyl and p,p’-DDE in more than 100 samples from 1,466 so risk assessment on human health was calculated specially for those pesticides.     

Development and Validation of Stability Indicating RP-HPLC Method for the Determination of Process and Degradation-Related Impurities in Sugammadex Sodium Drug Substance

The aim of this study is to develop and validate a sensitive and specific stability-indicating reversed-phase high-performance liquid chromatographic (RP-HPLC) method for the quantitative determination of Sugammadex sodium together with its process and possible degradation impurities. The pKa value is 2.82. The chromatographic conditions have been optimized by the Hypersil Gold 250 mm X 4.6 mm, 3 µ RP-18 columns with gradient elution using a mobile phase composed of 0.1% phosphoric acid, acetonitrile, and methanol. The eluents were monitored at 205 nm with a flow rate of 1.0 mL/min with an injection volume of 20 µL. The optimized method produced symmetrical and sharp peaks with good separation between the process and degradation impurities. The forced degradation study was carried out under acid, base, oxidation, and thermal conditions to demonstrate the stability-indicating capability of the method. The method was validated as per the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) Q2 (R1) and showed excellent specificity, precision, linearity, accuracy, and robustness. The developed HPLC method was precise with a value of 0.25%. The relative standard deviation of accuracy represented by the recovery studies ranged between 89.5% and 104.6%. Linearity analyses indicated a correlation coefficient value of greater than 0.996 for Sugammadex and its known impurities. The LOD and LOQ values for Sugammadex ranged from 0.017% to 0.050%, and for its related impurities, they ranged from 0.015% to 0.055%. The stability of the analytical solution was evaluated and was stable for 75 h when stored at 5 °C. No chromatographic interference was observed during the degradation studies and also in the blank chromatogram.