Reactions of Lewis bases with tetrakisdiphenylamide uranium(IV)

The coordinatively unsaturated uranium(IV) complex U[N(C₆H₅)₂]₄ has been prepared via the stoichiometric reaction of diphenylamine with [(Me₃Si)₂N]₂ H₂. U[N(C₆H₅)₂]₄ coordinates Lewis bases such as Et₂O, THF, pyridine or (EtO)₃PO, based on electronic absorption spectroscopy and ¹H NMR studies. Exchange between U[N(C₆H₅)₂]₄ and U[N(C₆H₅)₂]₄(L), where L is THF or pyridine, is rapid on the NMR time-scale between 307 and 323 K. Measurement of equilibrium constants for L = THF provides ΔH and ΔS values of −60 kJ mol⁻¹ and −1.8 × 10² J K⁻¹ mol⁻¹, respectively. U[N(C₆H₅)₂]₄ coordinates and binds (EtO)₃PO much more tightly (K_eq = & > 10⁴ M⁻¹) than THF or pyridine with the exchange rate between U[N(C₆H₅)₂]₄ and U[N(C₆H₅)₂]₄[OP(OEt)₃] being close to the NMR time-scale.     

阴离子插层镁铝水滑石结构及相互作用的理论研究

采用密度泛函理论(DFT)计算了MgAl-LDHs层板与无机阴离子(F^-、Cl^-、NO₃^-、CO₃^2-、SO₄^2-)和有机阴离子(水杨酸根离子([HO(C₆H₄)COO]^-)、苯甲酸根离子([(C₆H₅)COO]^-)、对二甲氨基苯甲酸根离子([p-(CH₃)₂N(C₆H₄)COO]^-)、十二烷基磺酸根离子[C₁₂H₂₅SO₃]^-、己烷基磺酸根离子[C₆H₁₃SO₃]^-、丙烷基磺酸根离子[C₃H₇SO₃]^-)间的相互作用,获得稳定超分子几何结构及相互作用能。层板主体与客体间存在较强的超分子作用,包括主客体间静电作用和氢键等。主、客体间相互作用能数值大小顺序为CO₃^2- > SO₄^2- > F^-> Cl^-> NO₃^-;[p-(CH₃)₂N(C₆H₄)COO]^-> [(C₆H₅)COO]^-> [HO(C₆H₄)COO]^-和[C₁₂H₂₅SO₃]^-> [C₆H₁₃SO₃]^- > [C₃H₇SO₃]^-。另外,还采用自然键轨道(NBO)计算和分析了LDHs 层板与阴离子间作用机理,从二阶微扰理论计算得到的稳定化能变化趋势与相互作用能数据基本吻合。     

Group 3 and 4 metal alkyl and hydrido complexes containing a linked amido-cyclopentadienyl ligand: “constrained geometry” polymerization catalysts for nonpolar and polar monomers

In order to understand the nature of the putative cationic 12-electron species [M(η⁵:η¹-C₅R₄SiMe₂NR′)R″]⁺ of titanium catalysts supported by a linked amido-cyclopentadienyl ligand, several derivatives with different cyclopentadienyl C₅R₄ and amido substituents R′ were studied systematically. The use of tridentate variants (C₅R₄SiMe₂NCH₂CH₂X)²⁻ (C₅R₄=C₅Me₄, C₅H₄, C₅H₃^tBu; X=OMe, SMe, NMe₂) allowed the NMR spectroscopic observation of the titanium benzyl cations [Ti(η⁵:η¹-C₅Me₄SiMe₂NCH₂CH₂X)(CH₂Ph)]⁺. Isoelectronic neutral rare earth metal complexes [Ln(η⁵:η¹-C₅R₄SiMe₂NR′)R″] can be expected to be active for polymerization. To arrive at neutral 12-electron hydride and alkyl species of the rare earth metals, we employed a lanthanide tris(alkyl) complex [Ln(CH₂SiMe₃)₃(THF)₂] (Ln=Y, Lu, Yb, Er, Tb), which allows the facile synthesis of the linked amido-cyclopentadienyl complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(CH₂SiMe₃)(THF)]. Hydrogenolysis of the linked amido-cyclopentadienyl alkyl complex leads to the dimeric hydrido complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(THF)(μ-H)]₂. These complexes are single-site, single-component catalysts for the polymerization of ethylene and a variety of polar monomers such as acrylates and acrylonitrile. Nonpolar monomers such as -olefins and styrene, in contrast, give isolable mono-insertion products which allow detailed studies of the initiation process.     

Template-directed Synthesis of Three Metal Oxalates via 4-Connected Building Units

Three novel compounds, [Co（en）3]2[Zr2（C2O4）7]·2H20（HNU-2, en=ethylenediamine）, [Co（NH3）6]· [Ce（CzO4）3（H2O）]·H2O（HNU-3） and [Co（dien）2][Gd（C2On）3]·0.75H2O（HNU-4, dien=dethylenetriamine） were hydro- thermal synthesized based on the templates of [Co（en）3]C13, [C0（NH3）6]C13 and [Co（dien）2]C13, respectively. The Zr4＋ Ce3＋ and Gd3＋ cations are all coordinated by four oxalates to form [M（C2O4）n（H2O）n]m （M=Zr, Ce or Gd; n=0 or 1; m=4 or 5）, which are similar to [In（C2O4）4]5- in NKB-1, and can be regarded as 4-connected building units. The [M（C2O4）a（H2O）n]m units are connected via sharing the bis-bidentate bridging oxalate ligands to form binuclears in HNU-2 and 1D ＂zigzag＂ chains in HNU-3 and HNU-4. cular building units to design 3D open frameworks with It is suggested that these compounds could be used as mole- zeolite topologies.     

γ辐射下CMPO/[C2mim][NTf2]的辐解及其对Eu3+萃取的影响

主要考察了辛基(苯基)-N, N-二异丁基胺甲酰基甲基氧化膦(CMPO)在1-乙基-3-甲基咪唑双三氟甲基磺酰胺酸盐([C₂mim][NTf₂])中的γ辐解行为,同时考察辐射对CMPO/[C₂mim][NTf₂]萃取能力的影响。通过超高效液相色谱-四极杆飞行时间质谱联用仪(UPLC/Q-TOF-MS)进行定量分析、辐解产物认定以及产物半定量分析。CMPO/正十二烷作为对比条件进行了相同研究。结果表明：CMPO在[C₂mim][NTf₂]中的辐解率低于其在正十二烷中,并且辐解路径不同。在正十二烷体系中,CMPO主要发生C―P、C―N键的断链,而在离子液体体系中CMPO主要发生异丁基脱除反应,并与[C₂mim]^+·、·CF₃等离子液体产生的自由基发生取代反应。综合辐解研究结果,我们提出CMPO/[C₂mim][NTf₂]的辐解路径,这加深了CMPO在离子液体中辐解机理的认识。最后,通过萃取实验发现,当硝酸浓度为0.01 mol·L^-1,辐照剂量为800 kGy时,CMPO/[C₂mim][NTf₂]对Eu³⁺的萃取率依旧达到99%以上。     

Synthese und reaktivität von dienylmetall-verbindungen : XXVII. Ein einfacher weg zur synthese von cyclopentadienylcobalt(III)-dikationen

CpCo(CO)₂ is oxidised by [Cp₂Fe]BF₄ (Cp = C₅H₅) in the presence of neutral ligands L to give the dications [CpCoL₃]²⁺ (L = SMe₂, S(n-C₄H₉)₂, PMe₃, C₅H₅N, MeCN; Me = CH₃). In [CpCo(SMe₂)₃]²⁺, sulfane ligands are substituted by neutral ligands L, L---L and L---L---L, to give the complexes [CpCoL₃]²⁺ (L = SeMe₂, TeMe₂, PMe₃, P(OMe)₃, AsMe₃, SbMe₃, t-C₄H₉NC, C₅H₅N, MeCN), [Cp-Co(L---L)SMe₂]²⁺ (L---L = R₂P(CH₂)_nPR₂, n = 1, 2, R = C₆H₅; bipyridine, o-phenanthroline, neocuproin) and [CpCo(L---L---L)]²⁺ (L---L---L = RP(CH₂CH₂PR₂)₂, R = C₆H₅). The dications react with iodide resulting in the monocations [CpCoL₂I]⁺ and [CpCo(L---L)I]⁺. Azacobaltocinium cations [CpCo(C₄R₂H₂N)]⁺ (R = H, CH₃) are obtained by reaction of [CpCo(SMe₂)₃]²⁺ with metal pyrrolides.     

手性赖氨酸基Gemini表面活性剂的表面性能

用表面张力法、电导法和稳态荧光法研究了手性Gemini表面活性剂[C₁₂-m-C₁₂] Na₂（m=2,4,6）和[C₁₂-T-C₁₂] Na₂的表面性能及临界胶束聚集数,并计算胶束形成的热力学参数,用圆二色谱法考察了[C₁₂-2-C₁₂] Na₂在不同浓度下的立体构型. 结果表明,手性Gemini表面活性剂的临界胶束浓度（cmc）和临界表面张力γ_cmc随着连接基链长增加或刚性增强而增大;ΔG_m⁰和ΔH_m⁰为负值,|ΔH_m⁰|比|-TΔS_m⁰|小很多,说明胶束化过程为熵驱动的自发放热过程;随着连接基链长增加或刚性增强,ΔG_m⁰和ΔH_m⁰逐渐增大,ΔS_m⁰和临界胶束聚集数逐渐减小,表明其胶束化能力随之降低;当浓度大于cmc时,手性Gemini表面活性剂可形成手性超分子聚集体.     

Pre-reduced Activated Carbon-Supported Molybdenum-Based Catalysts for the Production of Mixed Alcohols from Synthesis Gas

Unsupported or supported Mo-based catalysts have been widely employed in petroleum industry, for hydrotreating^[1],and for the production of hydrocarbons^[2] and alcohols_[3] by hydrogenation of CO (or CO₂). Oxides, such as alumina, silica, silica-alumina, are commonly used as the supports for these purposes. Carbon-supported materials have been claimed to have potential advantages over oxide-supported ones, such as lower tendency of carbon deposition^[4], less dehydration and thus less secondary reactions. Here we present results on mixed alcohol synthesis over H₂-prereduced C-supported Mo-based catalysts.     

Supported transition-metal catalysts for the C---C coupling reaction between ethene and diazoalkanes

The preparation of a series of immobilized transition-metal catalysts are reported. The catalysts were obtained by chemisorption of either rhodium(I) or iridium(I) complexes [MX(C₂H₄)₂]_n (M = Rh, Ir; X = Cl, OAc, acac, f₃-acac, f₆-acac) on SiO₂ or MgO supports. The oxides were also activated by SiCl₄ or TiCl₄ to give support materials in which the acidic nature of the surface is substantially increased. The activity of the immobilized catalysts was tested, particularly in the reaction of ethene with diphenyldiazomethane which yields a mixture of 1.1-diphenylpropene (8) and 1.1-diphenylcyclopropane (9). It was found that the most active and most selective (highest ratio 8:9) catalyst B1 was formed support material B (SiO₂ activated by SiCl₄) and [RhCl(C₂H₄)₂]₂ (1) and that both the activity and selectivity of B1 was comparable with that of complex 1 in solution. In contrast, the supported catalysts A2, D2 and A3, D3 obtained from [Rh(OAc)(C₂H₄)₂]₂ (2) and [Rh(acac)(C₂H₄)₂] (3) were less active than compounds 2 and 3 in solution. The immobilized catalysts A6, A7, D7 and E7, which were generated from the chloro- and acetatoiridium(I) complexes [IrCl(C₂H₄)₂]₂ (6) and [Ir(OAc)(C₂H₄)₂]₂ (7), possessed a lower activity than the rhodium counterparts. With diazoalkanes other than Ph₂CN₂, the activity of the supported catalyst B1 was partly higher and partly lower than that of complex 1 in the homogeneous phase.     

Catalytic Reduction of Nitric Oxide on SiO2/AlO3-supported Transition Metal Catalysts

Selective reduction of nitric oxide in pressence of oxygen is one of the major challenges in the automobile exhaust after-treatment for lean-bum gasoline engines and diesel engines. Besides Cu-ZSM-5, Pt and Pd based noble metal catalysts, alumina-supported silver catalysts show high activities on NOx conversion to nitrogen^[1,2]. However, NO conversion activities over silver on binary oxides have rarely been studied in detail^[3], although copper on SiO₂-Al₂O₃ catalyst was reported to have a high activity^[4] Here, NOx reduction activities on SiO₂-Al₂O₃-supported transition metal catalysts prepared by sol-gel method was investigated.     

Formation of [C60C5H5] adduct cations and theoretical study of the isomers

We study here the reactions between C₆₀ and planar C₅H₅⁺ cations that lead to the formation of [C₆₀C₅H₅]⁺ adduct cations in the chemical ionization source of the mass spectrometer. The structures, stabilities and charge locations of some possible isomers of [C₆₀C₅H₅]⁺: σ-adduct, π-complex, [1,4]- and [l,2]-addition cations, are studied by AM1 semiempirical molecular orbital calculations. We find that the most stable is the σ-addition cation. Another interesting and stable structure is the π-complex cation which is bonded by the electrostatic interaction at the inter-ring distance of 1.589 Å with the C_5v symmetry. The C₅H₅⁺ cyclopentadienium cation seems to be an “inverted umbrella” sitting on a five-membered ring of the C₆₀ cage.     

Pathways for the thermally induced dehydrogenation of C60H2

The thermolysis of C₆₀H₂ to yield C₆₀ and H₂ was studied by hybrid density functional theory (B3LYP/6-311G**//B3LYP/3-21G). The concerted loss of dihydrogen requires an activation energy of 92 kcalmol⁻¹ atT=452 K. An alternative radical mechanism, which is first order in the C₆₀H₂ concentration, has an activation energy at 452 K of only 61 kcalmol⁻¹. Monitoring of the C₆₀H₂ decomposition in 1,2-dichloro-[D₄]-benzene solution by NMR spectroscopy indicates a pseudo first-order reaction with an activation energy of 61.38±2.35 kcalmol⁻¹.     

Synthesis, characterization and reactivity of palladium(II) compounds containing terdentate [Csp, N, S] or [Csp, N, S] ligands

The study of the reactivity of R---CH=N---(C₆H₄-2-SMe) with R=C₆H₅ or 2,4,6-Me₃-C₆H₂ with palladium(II) salts is reported. These studies have allowed us to prepare and characterize the coordination complexes: cis-[Pd{R---CH=N---(C₆H₄-2-SMe)}Cl₂] {R=C₆H₅ or 2,4,6-Me₃-C₆H₂} and the cyclopalladated compounds [Pd{C₆H₄---CH=N---(C₆H₄-2-SMe)}Cl] and [Pd{(2-CH₂-4,6-Me₂-C₆H₂)---CH=N---(C₆H₄-2-SMe)}Cl]. The X-ray crystal structures of the latter complexes reveal that the thioimines act as a [Csp², phenyl,N,S]⁻ and as a [Csp³, N,S]⁻ terdentate group, respectively. The study of the reactions of the cyclopalladated compounds with PPh₃ is also reported.     

催化剂表面Cu0含量对二氧化碳加氢合成C2+醇性能的影响

通过在空气气氛下焙烧Cu@Fe-MIL-88B MOF材料制备了CuFe组分均匀分散的催化剂前驱物, 该前驱物经过不同温度下的预还原制得表面具有不同Cu和Fe价态分布的系列催化剂. 将所制备的催化剂用于固定床反应器上CO₂加氢合成C₂₊醇的性能研究, 并结合催化剂的X射线衍射(XRD)、 X射线光电子能谱(XPS)、 氢气程序升温还原(H₂-TPR)、 氮气吸附-脱附、 扫描电子显微镜(SEM) 和高分辨率透射电子显微镜(HRTEM)等表征结果发现, 较高的还原温度增加了催化剂表面低价态的Cu和Fe的含量; 当还原温度为350 ℃时, 催化剂表面Cu⁰/(Cu⁺+Cu⁰)摩尔比为73.9%, 单质Fe摩尔分数为0.40%, 催化效果最好, CO₂转化率达到6.82%, 总醇选择性为39.4%, 其中C₂₊醇的摩尔比达到95.1%.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Reactions of pentafluorophenylxenon(II) hexafluoroarsenate [C6F5Ze] [AsF6] with halide anions in acetonitrile

Reactions of [C₆F₅Xe]⁺ [AsF₆]⁻ in acetonitrile with halide anions X⁻ show different results depending on X. If X = I, Br or Cl, then C₆F₅X is obtained. If X = F, then C₆F₅H and C₆F₅---C₆F₅ are produced, and if X = HF₂, then C₆F₆, C₆F₅H and C₆F₅---C₆F₅ are formed.     

溶液中钪与草酸离子的配位作用

提钪工艺中常使草酸钪溶于过量草酸铵溶液中。但文献中有关钪与草酸离子配位作用的报导甚少。等用分光光度法测定了ScC₂O₄⁺配离子的稳定常数,而J·Stary则用分配法测定了SC(C₂O₄)₃^3-配离子的稳定常数,这些工作都没有对溶液中可能生成各级配离子进行研究。     

Microporous Zinc Formate for Efficient Separation of Acetylene over Carbon Dioxide

Separation of acetylene(C₂H₂) from carbon dioxide(CO₂) by adsorbents is very challenging owing to their high similarity on molecular shape and dimension. Exploring inexpensive and easily available porous materials is of importance to facilitate the practical implementation of the challenging but energy-efficient separation. Herein, we utilize an easily available porous material[Zn₃(HCOO)₆] for the selective separation of C₂H₂ over CO₂. Because of the pore confinement in[Zn₃(HCOO)₆](pore size of 0.47 nm) and accessible oxygen sites for preferential binding of C₂H₂, this material exhibits high low-pressure uptake for C₂H₂(63 cm³/cm³ at 10 kPa and 298 K) and high C₂H₂/CO₂ selectivity(7.4 under ambient conditions) that is comparable to those of out-performing porous materials. The efficient separation of[Zn₃(HCOO)₆] for C₂H₂/CO₂ mixture has also been confirmed by the breakthrough experiments.     

New heterodimetallic cyclopentadienyl carbonyl complexes: crystal structure of (C5Me4Et)(μ-CO)3Ru(C5Me5)

A series of heterodimetallic complexes of general formula (C₅R₅)M(μ-CO)₃RuC₅Me₅ (M = Cr, Mo, W; R = Me, Et) has been prepared in good yields by the reaction of [C₅R₅M(CO)₃]⁻ with [C₅Me₅Ru(CH₃CN)₃]⁺. (C₅Me₄Et)W(μ-CO)₃Ru(C₅Me₅) was characterized by a crystal structure determination. The W---Ru bond length of 2.41 Å is consistent with the formulation of a metal-metal triple bond, while the unsymmetrical bonding mode of the three bridging carbonyl groups reflects the inherent non-equivalence of the two different C₅R₅M-units. Using [CpRu(CH₃CN)₃]⁺ or [CpRu(CO)₂(CH₃CN)]⁺ as the cationic precursor leads to the formation of dimetallic species (C₅R₅)M(CO)₅RuC₅H₅ with both bridging and terminal carbonyl groups.     

1-乙基-3-甲基咪唑丙氨酸离子液体热力学性质的研究

用中和法合成了氨基酸离子液体1-乙基-3-甲基咪唑丙氨酸([C₂mim][Ala]),并利用恒温环境的溶解反应热量计,在(288.15±0.01) K-(308.15±0.01) K温度范围内每隔5 K,测定不同质量摩尔浓度离子液体在水中的溶解焓(Δ_solH_m^θ).根据Archer的方法,通过线性拟合得到了该离子液体的标准摩尔溶解焓(Δ_sol),并计算了其相对表观摩尔溶解焓(^ΦL).在298.15 K下,根据Glasser经验方法得到了格子能U_POT = 566 kJ·mol^-1,并计算了其阴阳离子水化焓值(ΔH⁺ + ΔH^-) = -620 kJ·mol^-1及阴离子水化焓ΔH^-([Ala]^-) = -387 kJ·mol^-1.此外,估算了[C₂mim][Ala]水溶液的热容(C_p(sol))和表观摩尔热容(^ΦC_p).