Pulse radiolysis of 9-anthrylmethylammonium cation in aqueous solution

The reaction of hydrated electron with 9-anthrylmethylammonium cation to form the respective anthracene radical anion in aqueous solution has been studied by the method of pulse radiolysis. The rate constant of the reaction of with is reported. It is demonstrated that the anthracene radical anion is unstable and undergoes further reactions. The spectra of transient intermediates, leading to the final reduction products, are presented.     

Rare gas–iodine complexes in the ion-pair states

Luminescence and luminescence excitation spectra in the vicinity of the optical–optical double resonance transitions to the I₂(, v_f = 8 and 9, J_f ≈ 55) levels have been measured at the bulb conditions for the I₂ + Rg mixtures (Rg = He, Ar, Xe) at the rare gas pressures 2–20 Torr and room temperature. Luminescence attributed to the RgI₂ complexes in the ion-pair states has been observed for the first time. It is argued that the complexes can be formed by direct optical excitation from the complexes or colliding pairs. Besides, the RgI₂ complexes in the ion-pair states can be formed in nonadiabatic internal conversion processes from the one. The complexes have rather long lifetime, especially in the case of Xe, and decay radiatively and nonradiatively forming I₂ molecules in different ion-pair states.     

The limiting partial molar volume and apparent molar volume of glycylglycine in aqueous KCl solution at 298.15 and 308.15 K

Apparent molar volumes V_Φ of glycylglycine in aqueous KCl solutions have been obtained from densities at 298.15 and 308.15 K measured with a vibrating-tube densimeter. These data have been used to deduce partial molar volumes of transfer from water to different KCl–water mixtures. values are positive. This result arises from the interaction of KCl with the charged centers of glycylglycine. The results show that depends less on temperature. Hydration numbers are calculated from data and are interpreted in terms of various interactions.     

Computational study on the kinetics of the reaction between Ca and urea

A computational study, in the framework of statistical kinetic theories, of the reaction of Ca²⁺ with urea has been carried out. The kinetically preferred products are NH₃ + [CaOCNH]²⁺, which are the fifth products in order of stability. The second kinetically preferred products are , followed by [CaNH₃]²⁺+HNCO, whereas the most stable ones, and , appear only in residual quantities. These estimates are in agreement with the experimental evidence and provide a suitable mechanism to understand the competition between Coulomb explosion and neutral loss processes.     

Theoretical studies on the aromaticity of η-cyclopentadienyl cobalt dithiolene complexes

Some η⁵-cyclopentadienyl cobalt dithiolene complexes CpCoS₂C₂R₂ have been optimized at B3LYP/6-311++G(d) level. The optimized geometries agree well with experiment. The analyses of nature bond orbital and nucleus-independent chemical shift (NICS) at B3LYP/6-311++G(d) and GIAO-B3LYP/6-311++G(d) levels reveal the aromatic character of the η⁵-cyclopentadienyl cobalt dithiolene complexes. However, their aromaticity is weaker than that of the isolated . There are two reasons for the change of heterocyclic aromaticity of the metal dithiolene in the η⁵-cyclopentadienyl cobalt dithiolene complexes with respect to that of the isolated . The better equalization of bond lengths in the isolated cation is the first reason. The other reason is that the contribution to the NICS from the metallic cobalt atom is much larger in the isolated cation . The planar character of cyclopentadienyl is destroyed slightly in the complexes. At the same time, the size of cyclopentadienyl (Cp) becomes bigger than the isolated Cp⁻¹ and this is caused by the cobalt atom in the pentagon. The π-electron delocalization causes stronger aromaticity of the Cp in the complexes than that of the isolated Cp⁻¹.     

Theoretical studies on fluorescence of phenol and 1-naphthol in both acid and alkali solutions

The molecular structures of the ground state and the first singlet excited state for , C₆H₅OH, C₆H₅O⁻, , C₁₀H₇OH and C₁₀H₇O⁻, the forms of phenol and 1-naphthol in acid and alkali solutions, were optimized by ab initio HF and configuration interaction with singlet excitations (CIS) method, respectively. Their fluorescent spectra were obtained by the time-dependent density functional theory (TD-DFT) using the B3LYP method with the 6-31+G (d) basis set. The frontier molecular orbital characteristics, fluorescent spectrum and proton affinities had been analyzed systematically in order to study different fluorescence of phenol and 1-naphthol in acid and alkali solutions. It was found that C₆H₅OH and are the main forms of phenol in acid solution, but C₆H₅O⁻ in alkali solution; C₁₀H₇OH and C₁₀H₇O⁻ are the main forms of 1-naphthol in alkali solution, but in acid solution. The calculated results are in good agreement with the experimental data.     

Production of HO2 and O2 by multiple ionization in water radiolysis by swift carbon ions

We present a simulation of liquid water radiolysis by swift carbon ions that explicitly takes into account multiple ionization of water molecules. For high linear energy transfer (LET), this process is not negligible with respect to single ionization. The rearrangement of highly ionized water molecules is consistent with production of atomic oxygen. Multiple ionizations is shown to be responsible for creation of a large amount of radicals and O₂ molecules. The simulated yield reproduces very well direct optical measurements for swift ions with comparable LET. Our simulation for is in also agreement with experiment.     

Long-term prediction of compressive creep development in expanded polystyrene

The results obtained in investigating the creep of expanded polystyrene (EPS) boards under compressive stress are presented. Power and exponential equations were used for describing creep compliance. It was found that the curves of creep compliance approximated by both equations adequately represent the research results, taking into account the scatter of the experimental data. Based on the calculation and empirical estimate of long-term creep of EPS under compressive stress σ_c=(0.25–0.45)σ_10%, its creep compliance was determined for a period of 10 years in the future. The dependence of on the density of polystyrene boards and the value of long-term compressive stress σ_c was established. The expected values of creep strain development in expanded polystyrene boards EPS 80–EPS 250 under constant compressive stress σ_c=(0.25–0.45)σ_10% are presented for the prediction period of 10 years. To obtain the expected creep values for any other period of time in the interval of 5T50 years, the values of should be multiplied by the empirical coefficient .     

Analysis of the interactions between human serum albumin/amphiphilic penicillin in different aqueous media: an isothermal titration calorimetry and dynamic light scattering study

The complexation process of the amphiphilic penicillins sodium cloxacillin and sodium dicloxacillin with the protein human serum albumin (HSA) in aqueous buffered solutions of pH 4.5 and 7.4 at 25 °C was investigated through isothermal titration calorimetry (ITC) and dynamic light scattering. ITC experiments were carried out in the very dilute regime and showed that although hydrophobic interactions are the leading forces for complexation, electrostatic interactions also play an important role. The possibility of the formation of hydrogen bonds is also deduced from experimental data. The thermodynamic quantities of the binding mechanism, i.e, the enthalpy, , entropy, , Gibbs energy, , binding constant, and the number of binding sites, n_i, were obtained. The binding was saturable and is characterised by Langmuir adsorption isotherms. From ITC data and following a theoretical model, the number of bound and free penicillin molecules was calculated. From Scatchard plots, and n_i were obtained and compared with those from ITC data. The interaction potential between the HSA–penicillin complexes and their stability were determined at pH 7.4 from the dependence of the diffusion coefficients on protein concentration by application of the DLVO colloidal stability theory. The results indicate decreasing stability of the colloidal dispersion of the drug–protein complexes with increase in the concentration of added drug.     

Effect of procaine hydrochloride on the micellization of double tailed surfactants in the aqueous solution

The effects of procaine hydrochloride (PC) on the micellization of two kinds of double tailed surfactants in aqueous solutions, sodium bis (2-ethyl-1-hexyl) sulfosuccinate (AOT) and didodecyldimethylammonium bromide (DDAB), were studied by surface tension measurements. The results revealed that PC could decrease the equilibrium surface tension and critical micelle concentration (cmc) of AOT, but it is opposite for DDAB. Their standard thermodynamic parameters of micellization, , and , have been calculated in aqueous solutions. The locations of PC in the two kinds of micelles were investigated by UV and fluorescence spectroscopy. It is found that the mixed micelle of AOT and PC could be formed, but the effect of PC on the micellization of DDAB is quite small.     

An anionic chromogenic sensor based on protonated Reichardt’s pyridiniophenolate

An anionic sensor based on Reichardt’s betaine is described here. The dye is blue-green in chloroform but becomes colorless under protonation. Increasing amounts of different anions were added into the solution of the protonated dye. The addition of F⁻ and caused the reappearance of the original blue-green color, while the addition of I⁻ made the solution of the protonated dye yellow. The observations are discussed based on the fact that F⁻ and can act as bases accepting a proton from the protonated dye and also in relation to the formation of a complex between the protonated dye and iodide.     

Gas-phase reactivities of charged platinum dimers with ammonia: A combined experimental/theoretical study

Computational and experimental studies of with ammonia are reported. While ammonia is dehydrogenated with either cluster type, the reaction efficiencies are quite different with  = 0.27 for [K. Koszinowski, D. Schröder, H. Schwarz, J. Phys. Chem. A 107 (2003) 4999.] and  = 0.0033 for . DFT-based relativistic calculations are consistent with this distinct behavior, with maximum energies along the reaction path of −13.3 kcal/mol for the cationic and +1.4 kcal/mol for the anionic clusters relative to the reactants. The recently proposed mechanism for the system [D. Xu. X.-Y. Chen, S.-G. Wang, Int, J. Quant. Chem. 107 (2007) 1985.] needs to be modified to account for the experimental findings.     

Rate constants of the O(D) reactions with N2, O2, N2O, and H2O at 295 K

Using a technique of laser flash photolysis coupled with vacuum ultraviolet laser-induced fluorescence spectroscopy, the rate coefficients of O(¹D) reactions with N₂, O₂, N₂O, and H₂O at 295 ± 2 K have been determined to be , k_O2=(4.06±0.24)×10^-11, k_N2O=(1.35±0.08)×10^-10 and . The quoted uncertainties include estimated errors and are the 95% confidence level. The k_N2 and k_N2O values obtained are larger than the current NASA/JPL recommendations by 26% and 16%, respectively, although they are still within the error limits associated with the recommendations.     

Anion sensing using colorimetric amidourea based receptors incorporated into a 1,3-disubstituted calix[4]arene

The synthesis of amidourea-based colorimetric anion sensors 1 and 2 and the evaluation of these sensors using anions such as acetate , fluoride (F⁻), hydrogen phosphate and hydrogenpyrophosphate (pyr) in DMSO is described. While 1 has a single amidourea moiety, 2 has two such receptors incorporated into a lower-rim 1,3-disubstituted calix[4]arene scaffold. Whilst both sensors gave rise to red shifts in their absorption spectra upon anion recognition, the sensing of F⁻ and pyr gave rise to large changes with concomitant colour changes from yellow to purple, which were visible to the naked eye.     

Excess molar enthalpies for binary mixtures of trimethyl phosphate with alkanols {CH3(CH2)nOH, n = 0–3} at 298.15 K

The excess molar enthalpies () for the binary mixtures of trimethyl phosphate (TMP) with alkanols {CH₃(CH₂)_nOH, n = 0–3} have been measured with an isothermal calorimeter at 298.15 K and atmospheric pressure. The values are positive for all the mixtures over the whole composition range. The values increase in the order methanol < ethanol < 1-propanol < 1-butanol. The experimental results have been correlated with the Redlich–Kister equation.     

Supramolecular architecture of cadmium(II)–terephthalate complexes having a tridentate or tetradentate Schiff base as blocking coligand

Two new cadmium(II)–terephthalate complexes, _∞¹{[Cd₂(μ-terephthalate)₂(L¹)₂]·9H₂O} (1) and [{Cd(H₂O)(L²)}₂(μ-terephthalate)](terephthalate) · 10H₂O (2), where L¹ = (E)-N¹,N¹-diethyl-N²-(1-(pyridin-2-yl)ethylidene)ethane-1,2-diamine; L² = N,N′-bis-(1-pyridin-2-yl-ethylidene)-ethane-1,2-diamine; have been synthesized by a conventional solution method. Characterization by single crystal X-ray crystallography shows that compound 1 is composed of 1-D polymeric zig-zag chains with distorted pentagonal-bipyramidal cadmium centers. Compound 2 consists of centrosymmetric dinuclear complexes with a distorted pentagonal-bipyramidal cadmium center in which one terephthalate ligand bridges the metal centres and another terephthalate anion with water of crystallization forms a H-bonding network.     

Partial molar enthalpy properties and correlation of excess molar enthalpy data of acetonitrile + diethylamine or S-butylamine mixtures at various temperatures and atmospheric pressure

Experimental data of excess molar enthalpy of binary mixtures of acetonitrile + diethylamine or S-butylamine mixtures as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure have been used to calculate excess partial molar enthalpy and partial molar enthalpy of each component as a function of composition as well as partial molar enthalpy properties at infinite dilution. The Flory and Prigogine–Flory–Patterson (PFP) theories were applied to correlate the data. The results of the calculations as well as the influence of temperature and isomers chain on the partial molar enthalpy properties are discussed.     

Hydrothermal synthesis and crystal structural characterization of two new modified polyoxometalates constructed of positive and negative metal–oxo cluster ions

Two new interesting polyoxometalate derivatives 1 and 2 constructed of modified metal–oxo cluster ions carrying positive and negative changes, respectively, was hydrothermally prepared and structurally characterized by IR, ESR, XPS, elemental analysis and X-ray crystallography. The result of structure determination shows that compound 1 and 2 are isostructural and both contain polyoxocation and polyoxoanion, and both cation and anion are built on mixed Mo–V tetra-capped pseudo-Keggin units with P centre, [Mo₈V₈O₄₀(PO₄)]ⁿ⁻, bonded to four or two [Ni(2,2′-bipy)₂H₂O]²⁺ complexes, respectively, via terminal oxygen of the capping V atoms. Magnetism measurement indicates that there exists antiferromagnetic interaction in complex 1 and 2.     

New regularities and an equation of state for liquids

Three regularities have been introduced for liquids (T < T_C and ρ > ρ_C) based on average potential energy. The experimental data have been used to show the validity of the regularities. First, there exists near-linearity relation between and ρ for all isotherms of a liquid, where P_i and ρ are internal pressure and density, respectively. Second, changes linearly with ρ for each isotherm of any liquid, where Z and V_m are compressibility factor and molar volume, respectively. Third, a new regularity using the definition of bulk modulus and our new equation of state between reduced bulk modulus and density has been introduced, that is versus ρ must be linear for all isotherms of a liquid where B_r is the reduced bulk modulus.

A new equation of state has been also derived. The density of some liquids in the extensive ranges of temperature and pressure has been calculated using the new equation of state. The densities calculated from this equation agree with experiment to better than 0.3%. The new equation of state can predict internal pressure, thermal expansion coefficient, and isothermal compressibility of liquids within experimental error.     

Crystal structure, phase transition and thermal behaviour of dabcodiium hexaaquacopper(II) bis(sulfate), (C6H14N2)[Cu(H2O)6](SO4)2

A new organically templated metal sulfate has been synthesized and characterized. At room temperature, dabcodiium hexaaquacopper(II) bis(sulfate), (C₆H₁₄N₂)[Cu(H₂O)₆](SO₄)₂ crystallizes in the monoclinic symmetry (space group P2₁/n) with the following unit cell parameters: a = 6.9533(2), b = 12.5568(2), c = 9.9434(2) Å; β = 90.526(1)° and Z = 2. Its crystal structure is built from isolated [Cu(H₂O)₆]²⁺, and disordered ions linked together by a hydrogen-bonding network. The title compound undergoes a reversible phase transition of the first-order type at 265.7/281.8 K on heating–cooling runs. Below the phase transition temperature, the structure is fully ordered.