Theoretical Insights into the Mechanism of Carbon Monoxide (CO) Release from CO‐Releasing Molecules

We used density functional theory to investigate the capacity for carbon monoxide (CO) release of five newly synthesized manganese‐containing CO‐releasing molecules (CO‐RMs), namely CORM‐368 ( 1 ), CORM‐401 ( 2 ), CORM‐371 ( 3 ), CORM‐409 ( 4 ), and CORM‐313 ( 5 ). The results correctly discriminated good CO releasers ( 1 and 2 ) from a compound unable to release CO ( 5 ). The predicted Mn? CO bond dissociation energies were well correlated (R²≈0.9) with myoglobin (Mb) assay experiments, which quantified the formation of MbCO, and thus the amount of CO released by the CO‐RMs. The nature of the Mn? CO bond was characterized by natural bond orbital (NBO) analysis. This allowed us to identify the key donor–acceptor interactions in the CO‐RMs, and to evaluate the Mn? CO bond stabilization energies. According to the NBO calculations, the charge transfer is the major source of Mn? CO bond stabilization for this series. On the basis of the nature of the experimental buffers, we then analyzed the nucleophilic attack of putative ligands (L′=HPO₄^2?, H₂PO₄^?, H₂O, and Cl^?) at the metal vacant site through the ligand‐exchange reaction energies. The analysis revealed that different L′‐exchange reactions were spontaneous in all the CO‐RMs. Finally, the calculated second dissociation energies could explain the stoichiometry obtained with the Mb assay experiments.     

The dissociation kinetics of energy-selected CpMn(CO)(3)(+) ions studied by threshold photoelectron-photoion coincidence spectroscopy

Threshold photoelectron-photoion coincidence spectroscopy has been used to investigate the dissociation kinetics of the cyclopentadienyl manganese tricarbonyl ion, CpMn(CO)(3)(+). The ionization energy of CpMn(CO)(3) was measured from the threshold photoelectron spectrum to be 7.69 +/- 0.02 eV. The dissociation of the CpMn(CO)(3)(+) ion proceeds by the sequential loss of three CO molecules. The first and third CO loss reactions were observed to be slow (lifetimes in the microsecond range). By simulating the resulting asymmetric time-of-flight peak shapes and breakdown diagram, 0 K onsets for three product ions were determined to be 8.80 +/- 0.04, 9.43 +/- 0.04, and 10.51 +/- 0.06 eV, respectively. Combined with the adiabatic ionization energy, the three successive Mn-CO bond energies in the CpMn(CO)(3)(+) were found to be alternating with values of 1.11 +/- 0.04, 0.63 +/- 0.04, and 1.08 +/- 0.06 eV, respectively. Using a scaled theoretical Cp-Mn(+) bond energy of 3.10 +/- 0.10 eV and the combined results from theory and experiment, the 298 K gas-phase heat of formation of CpMn(CO)(3) is suggested to be -419 +/- 15 kJ/mol. Based on this value, the 298 K heats of formation of CpMn(CO)(3)(+), CpMn(CO)(2)(+), CpMnCO(+), and CpMn(+) are 325 +/- 15, 546 +/- 15, 719 +/- 15, and 938 +/- 15 kJ/mol, respectively. By scaling theoretical calculated neutral bond energies with the experimental information derived in this study, the successive Mn-CO bond energies were estimated to be 1.88, 1.10, and 1.03 eV, respectively, while the Cp-Mn bond energy was found to be 2.16 eV. Comparison between the quantum chemical calculations and experimental values shows that the loss of CO groups follows the lowest energy adiabatic path, in which electronic spin on the metal center is not conserved.     

Direct studies on 5-coordinate intermediates formed during substitution at tetrahedral Fe sites: role of bound nucleophile in labilisation of leaving group

The substitution reactions of the tetrahedral Fe sites in [FeCl(4)](-), [Fe(2)S(2)Cl(4)](2-), [Fe(4)S(4)Cl(4)](2-) and [{MoFe(3)S(4)Cl(3)}(2)(micro-SEt)(3)](3-) with 4-RC(6)H(4)S(-) (R = MeO, Me, H, Cl or NO(2)) all involve rapid binding of the thiolate to a Fe site and formation of a kinetically and spectroscopically detectable intermediate. Kinetic studies allow calculation of the rate of Fe-Cl dissociation from the 5-coordinate site of the intermediate (k(2)(R)). The rate of Fe-Cl dissociation from the intermediate exhibits a marked dependence on the nature of the bound thiolate with log(10)(k(2)(R)) increasing in a linear manner with the calculated NBO charge on the sulfur atom of the coordinated thiolate. This behaviour indicates that Fe-Cl bond dissociation at the 5-coordinate intermediate involves a process in which Fe-thiolate bond shortening occurs prior to movement of the Fe-Cl bond.     

Theory of late-transition-metal alkyl and heteroatom bonding: analysis of Pt, Ru, Ir, and Rh complexes

Density functional and correlated ab initio methods were used to calculate, compare, and analyze bonding interactions in late-transition-metal alkyl and heteroatom complexes (M-X). The complexes studied include: (DMPE)Pt(CH(3))(X) (DMPE = 1,2-bis(dimethylphosphino)ethane), Cp*Ru(PMe(3))(2)(X) (Cp* = pentamethylcyclopentadienyl), (DMPE)(2)Ru(H)(X), (Tp)(CO)Ru(Py)(X) (Tp = trispyrazolylborate), (PMe(3))(2)Rh(C(2)H(4))(X), and cis-(acac)(2)Ir(Py)(X) (acac = acetylacetonate). Seventeen X ligands were analyzed that include alkyl (CR(3)), amido (NR(2)), alkoxo (OR), and fluoride. Energy decomposition analysis of these M-X bonds revealed that orbital charge transfer stabilization provides a straightforward model for trends in bonding along the alkyl to heteroatom ligand series (X = CH(3), NH(2), OH, F). Pauli repulsion (exchange repulsion), which includes contributions from closed-shell d(π)-p(π) repulsion, generally decreases along the alkyl to heteroatom ligand series but depends on the exact M-X complexes. It was also revealed that stabilizing electrostatic interactions generally decrease along this ligand series. Correlation between M-X and H-X bond dissociation energies is good with R(2) values between 0.7 and 0.9. This correlation exists because for both M-X and H-X bonds the orbital stabilization energies are a function of the orbital electronegativity of the X group. The greater than 1 slope when correlating M-X and H-X bond dissociation energies was traced back to differences in Pauli repulsion and electrostatic stabilization.     

Comprehensive thermochemistry of W-H bonding in the metal hydrides CpW(CO)2(IMes)H, [CpW(CO)2(IMes)H](•+), and [CpW(CO)2(IMes)(H)2]+. Influence of an N-heterocyclic carbene ligand on metal hydride bond energies

The free energies interconnecting nine tungsten complexes have been determined from chemical equilibria and electrochemical data in MeCN solution (T = 22 °C). Homolytic W-H bond dissociation free energies are 59.3(3) kcal mol(-1) for CpW(CO)(2)(IMes)H and 59(1) kcal mol(-1) for the dihydride [CpW(CO)(2)(IMes)(H)(2)](+) (where IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), indicating that the bonds are the same within experimental uncertainty for the neutral hydride and the cationic dihydride. For the radical cation, [CpW(CO)(2)(IMes)H](?+), W-H bond homolysis to generate the 16-electron cation [CpW(CO)(2)(IMes)](+) is followed by MeCN uptake, with free energies for these steps being 51(1) and -16.9(5) kcal mol(-1), respectively. Based on these two steps, the free energy change for the net conversion of [CpW(CO)(2)(IMes)H](?+) to [CpW(CO)(2)(IMes)(MeCN)](+) in MeCN is 34(1) kcal mol(-1), indicating a much lower bond strength for the 17-electron radical cation of the metal hydride compared to the 18-electron hydride or dihydride. The pK(a) of CpW(CO)(2)(IMes)H in MeCN was determined to be 31.9(1), significantly higher than the 26.6 reported for the related phosphine complex, CpW(CO)(2)(PMe(3))H. This difference is attributed to the electron donor strength of IMes greatly exceeding that of PMe(3). The pK(a) values for [CpW(CO)(2)(IMes)H](?+) and [CpW(CO)(2)(IMes)(H)(2)](+) were determined to be 6.3(5) and 6.3(8), much closer to the pK(a) values reported for the PMe(3) analogues. The free energy of hydride abstraction from CpW(CO)(2)(IMes)H is 74(1) kcal mol(-1), and the resultant [CpW(CO)(2)(IMes)](+) cation is significantly stabilized by binding MeCN to form [CpW(CO)(2)(IMes)(MeCN)](+), giving an effective hydride donor ability of 57(1) kcal mol(-1) in MeCN. Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) is fully reversible at all observed scan rates in cyclic voltammetry experiments (E° = -1.65 V vs Cp(2)Fe(+/0) in MeCN), whereas CpW(CO)(2)(IMes)H is reversibly oxidized (E° = -0.13(3) V) only at high scan rates (800 V s(-1)). For [CpW(CO)(2)(IMes)(MeCN)](+), high-pressure NMR experiments provide an estimate of ΔG° = 10.3(4) kcal mol(-1) for the displacement of MeCN by H(2) to give [CpW(CO)(2)(IMes)(H)(2)](+).     

Redox and catalase-like activities of four widely used carbon monoxide releasing molecules (CO-RMs)

The pathophysiological roles of the endogenous signaling molecule, carbon monoxide (CO), have been extensively studied and validated in cell culture and animal models. Further, evidence supporting the therapeutic effects of CO in various human diseases has been mounting over the last two decades. Along this line, there has been intensive interest in developing various delivery forms including CO gas, CO in solution, metal–carbonyl complexes widely known as CO-releasing molecules (CO-RMs), and organic CO prodrugs. Among them, two ruthenium-based carbonyl complexes, CORM-2 and -3, occupy a very special place because they have been used in over 500 published studies. One of the mechanisms for CO''s actions is known to be through attenuation of oxidative stress and regulation of production of reactive oxygen species (ROS). For this reason, it is important that CO delivery forms do not have intrinsic chemical redox properties. Herein, we describe our findings of catalase-like activities of CORM-2 and -3 in a CO-independent fashion, leading to the rapid degradation of hydrogen peroxide (H₂O₂) in PBS buffer (pH = 7.4) and in cell culture media. Further, we have found that CORM-2 and CORM-3 possess potent radical scavenging abilities. We have also studied two other widely used CO donors: CORM-401 and CORM-A1. Both showed chemical reactivity with ROS, but to a lesser degree than CORM-2 and -3. Because of the central role of ROS in some of the proposed mechanisms of actions for CO biology, the discovery of intrinsic chemical redox properties for these CO-RMs means that additional attention in designing proper controls is needed in future biological experiments using these CO-RMs for their CO-donating functions. Further, much more work is needed to understand the true implications of the chemical reactivity of these CO-RMs in cell-culture and animal-model studies of CO biology.

Four CO-releasing molecules are found to degrade H₂O₂ and free radicals either catalytically (CORM-2 and -3) or through direct reactions (CORM-401 and -A1) in solution under near-physiological conditions.     

(Eta-C5H4R)Fe(CO)2X], X = Cl, Br, I, NO3, CO2Me and [(eta-C5H4R)Fe(CO)3]+, R = (CH2)nCO2Me (n = 0-2), and CO2CH2CH2OH: a new group of CO-releasing molecules

A new group of CO-releasing molecules, CO-RMs, based on cyclopentadienyl iron carbonyls have been identified. X-Ray structures have been determined for [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)X], X = Cl, Br, I, NO(3), CO(2)Me, [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)](2), [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(2)](2) and [(eta-C(5)H(4)CO(2)Me)Fe(CO)(3)][FeCl(4)]. Half-lives for CO release, (1)H, (13)C, and (17)OC NMR and IR spectra have been determined along with some biological data for these compounds, [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(3)](+) and [[eta-C(5)H(4)(CH(2))(n)CO(2)Me]Fe(CO)(3)](+), n = 1, 2. More specifically, cytotoxicity assays and inhibition of nitrite formation in stimulated RAW264.7 macrophages are reported for most of the compounds analyzed. [(eta-C(5)H(5))Fe(CO)(2)X], X = Cl, Br, I, were also examined for comparison. Correlations between the half-lives for CO release and spectroscopic parameters are found within each group of compounds, but not between the groups.     

Reactivity of 17 e- complex [Re(II)Br4(CO)2]2- with bridging aromatic ligands. Characterization and CO-releasing properties

Carbon monoxide releasing molecules (CO-RMs) are a newly emerging class of compounds of pharmacological interest. Among the transition metal-based CO-RMs, 17-electron complexes of general formula cis-trans-[Re(II)(CO)(2)Br(2)L(2)] are promising candidates but their poor hydrophilicity hampers future applications. In an effort to increase water solubility of d(5) dicarbonyl rhenium CO-RMs, the reaction of the cis-[Re(II)(CO)(2)Br(4)](2-) anion with bridging aromatic ligands of the pyridine and diazine type was investigated. Mononuclear and binuclear complexes are presented and it is shown that the nature of the bridging ligand critically dictates the formation of either species. Most complexes retained their fundamental CO-releasing properties. The synthesis of the molecules together with structural, spectroscopic and theoretical details are discussed.     

Toward a small molecule, biomimetic carbonic anhydrase model: theoretical and experimental investigations of a panel of zinc(II) aza-macrocyclic catalysts

A panel of five zinc-chelated aza-macrocycle ligands and their ability to catalyze the hydration of carbon dioxide to bicarbonate, H(2)O + CO(2) → H(+) + HCO(3)(–), was investigated using quantum-mechanical methods and stopped-flow experiments. The key intermediates in the reaction coordinate were optimized using the M06-2X density functional with aug-cc-pVTZ basis set. Activation energies for the first step in the catalytic cycle, nucleophilic CO(2) addition, were calculated from gas-phase optimized transition-state geometries. The computationally derived trend in activation energies was found to not correspond with the experimentally observed rates. However, activation energies for the second, bicarbonate release step, which were estimated using calculated bond dissociation energies, provided good agreement with the observed trend in rate constants. Thus, the joint theoretical and experimental results provide evidence that bicarbonate release, not CO(2) addition, may be the rate-limiting step in CO(2) hydration by zinc complexes of aza-macrocyclic ligands. pH-independent rate constants were found to increase with decreasing Lewis acidity of the ligand-Zn complex, and the trend in rate constants was correlated with molecular properties of the ligands. It is suggested that tuning catalytic efficiency through the first coordination shell of Zn(2+) ligands is predominantly a balance between increasing charge-donating character of the ligand and maintaining the catalytically relevant pK(a) below the operating pH.     

Comproportionation of cationic and anionic tungsten complexes having an N-heterocyclic carbene ligand to give the isolable 17-electron tungsten radical CpW(CO)2(IMes)(•)

A series consisting of a tungsten anion, radical, and cation, supported by the N-heterocyclic carbene 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) and spanning formal oxidation states W(0), W(I), and W(II), has been synthesized, isolated, and characterized. Reaction of the hydride CpW(CO)(2)(IMes)H with KH and 18-crown-6 gives the tungsten anion [CpW(CO)(2)(IMes)](-)[K(18-crown-6)](+). Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) in MeCN (0.2 M (n)Bu(4)N(+)PF(6)(-)) is fully reversible (E(1/2) = -1.65 V vs Cp(2)Fe(+?/0)) at all scan rates, indicating that CpW(CO)(2)(IMes)(?) is a persistent radical. Hydride transfer from CpW(CO)(2)(IMes)H to Ph(3)C(+)PF(6)(-) in MeCN affords [cis-CpW(CO)(2)(IMes)(MeCN)](+)PF(6)(-). Comproportionation of [CpW(CO)(2)(IMes)](-) with [CpW(CO)(2)(IMes)(MeCN)](+) gives the 17-electron tungsten radical CpW(CO)(2)(IMes)(?). This complex shows paramagnetically shifted resonances in the (1)H NMR spectrum and has been characterized by IR spectroscopy, low-temperature EPR spectroscopy, and X-ray diffraction. CpW(CO)(2)(IMes)(?) is stable with respect to disproportionation and dimerization. NMR studies of degenerate electron transfer between CpW(CO)(2)(IMes)(?) and [CpW(CO)(2)(IMes)](-) are reported. DFT calculations were carried out on CpW(CO)(2)(IMes)H, as well as on related complexes bearing NHC ligands with N,N' substituents Me (CpW(CO)(2)(IMe)H) or H (CpW(CO)(2)(IH)H) to compare to the experimentally studied IMes complexes with mesityl substituents. These calculations reveal that W-H homolytic bond dissociation energies (BDEs) decrease with increasing steric bulk of the NHC ligand, from 67 to 64 to 63 kcal mol(-1) for CpW(CO)(2)(IH)H, CpW(CO)(2)(IMe)H, and CpW(CO)(2)(IMes)H, respectively. The calculated spin density at W for CpW(CO)(2)(IMes)(?) is 0.63. The W radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?) are calculated to form weak W-W bonds. The weakly bonded complexes [CpW(CO)(2)(IMe)](2) and [CpW(CO)(2)(IH)](2) are predicted to have W-W BDEs of 6 and 18 kcal mol(-1), respectively, and to dissociate readily to the W-centered radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?).     

Steric and electronic properties of N-heterocyclic carbenes (NHC): a detailed study on their interaction with Ni(CO)4

N-heterocyclic carbene ligands IMes (1), SIMes (2), IPr (3), SIPr (4), and ICy (5) react with Ni(CO)(4) to give the saturated tricarbonyl complexes Ni(CO)(3)(IMes) (8), Ni(CO)(3)(SIMes) (9), Ni(CO)(3)(IPr) (10), Ni(CO)(3)(SIPr) (11), and Ni(CO)(3)(ICy) (12), respectively. The electronic properties of these complexes have been compared to their phosphine analogues of general formula Ni(CO)(3)(PR(3)) by recording their nu(CO) stretching frequencies. While all of these NHCs are better donors than tertiary phosphines, the differences in donor properties between ligands 1-5 are surprisingly small. Novel, unsaturated Ni(CO)(2)(IAd) (13) and Ni(CO)(2)(I(t)()Bu) (14) compounds are obtained from the reaction of Ni(CO)(4) with IAd (6) and I(t)()Bu (7). Complexes 13 and 14 are highly active toward substitution of the NHC as well as the carbonyl ligands. This has allowed the determination of Ni-C(NHC) bond dissociation energies and the synthesis of various unsaturated Ni(0) and Ni(II) complexes. Computational studies on compounds 8-14 are in line with the experimental findings and show that IAd (6) and I(t)()Bu (7) are more bulky than IMes (1), SIMes (2), IPr (3), SIPr (4), and ICy (5). Furthermore, a method based on %V(bur) values has been developed for the direct comparison of steric requirements of NHCs and tertiary phosphines. Complexes 8-14, as well as NiCl(C(3)H(5))(I(t)()Bu) (16) and NiBr(C(3)H(5))(I(t)()Bu) (17), have been characterized by X-ray crystallography.     

CORM-3 reactivity toward proteins: the crystal structure of a Ru(II) dicarbonyl-lysozyme complex

CORM-3, [fac-Ru(CO)(3)Cl(κ(2)-H(2)NCH(2)CO(2))], is a well-known carbon monoxide releasing molecule (CORM) capable of delivering CO in vivo. Herein we show for the first time that the interactions of CORM-3 with proteins result in the loss of a chloride ion, glycinate, and one CO ligand. The rapid formation of stable adducts between the protein and the remaining cis-Ru(II)(CO)(2) fragments was confirmed by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES), Liquid-Chromatography Mass Spectrometry (LC-MS), Infrared Spectroscopy (IR), and X-ray crystallography. Three Ru coordination sites are observed in the structure of hen egg white lysozyme crystals soaked with CORM-3. The site with highest Ru occupancy (80%) shows a fac-[(His15)Ru(CO)(2)(H(2)O)(3)] structure.     

Potential energy surface for activation of methane by Pt(+): a combined guided ion beam and DFT study

A guided-ion beam tandem mass spectrometer is used to study the reactions of Pt(+) with methane, PtCH(2)(+) with H(2) and D(2), and collision-induced dissociation of PtCH(4)(+) and PtCH(2)(+) with Xe. These studies experimentally probe the potential energy surface for the activation of methane by Pt(+). For the reaction of Pt(+) with methane, dehydrogenation to form PtCH(2)(+) + H(2) is exothermic, efficient, and the only process observed at low energies. PtH(+), formed in a simple C-H bond cleavage, dominates the product spectrum at high energies. The observation of a PtH(2)(+) product provides evidence that methane activation proceeds via a (H)(2)PtCH(2)(+) intermediate. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies in eV (kJ/mol) of D(0)(Pt(+)-H) = 2.81 +/- 0.05 (271 +/- 5), D(0)(Pt(+)-2H) = 6.00 +/- 0.12 (579 +/- 12), D(0)(Pt(+)-C) = 5.43 +/- 0.05 (524 +/- 5), D(0)(Pt(+)-CH) = 5.56 +/- 0.10 (536 +/- 10), and D(0)(Pt(+)-CH(3)) = 2.67 +/- 0.08 (258 +/- 8). D(0)(Pt(+)-CH(2)) = 4.80 +/- 0.03 eV (463 +/- 3 kJ/mol) is determined by measuring the forward and reverse reaction rates for Pt(+) + CH(4) right harpoon over left harpoon PtCH(2)(+) + H(2) at thermal energy. We find extensive hydrogen scrambling in the reaction of PtCH(2)(+) with D(2). Collision-induced dissociation (CID) of PtCH(4)(+), identified as the H-Pt(+)-CH(3) intermediate, with Xe reveals a bond energy of 1.77 +/- 0.08 eV (171 +/- 8 kJ/mol) relative to Pt(+) + CH(4). The experimental thermochemistry is favorably compared with density functional theory calculations (B3LYP using several basis sets), which also establish the electronic structures of these species and provide insight into the reaction mechanism. Results for the reaction of Pt(+) with methane are compared with those for the analogous palladium system and the differences in reactivity and mechanism are discussed.     

OCS,CO2,N2O与烯、炔烃之间π…π作用的电子密度拓扑研究

采用MP2/aug-cc-pVDZ方法对氧硫化碳(OCS)、二氧化碳(CO2)、一氧化二氮(N2O)与乙烯(C2H4)、乙炔(C2H2)、2-丁炔(C4H6)之间形成的平行构型复合物中的分子间相互作用进行了理论研究.复合物的相互作用能按照B…C2H4B…C2H2>B…C4H6(B=OCS,CO2,N2O)的顺序依次减小.采用电子密度拓扑分析理论方法,讨论了复合物中π…π作用的成键特性.电子密度拓扑分析表明复合物中形成了弱的分子间相互作用,且以静电作用为主;π电子密度分子图与全电子密度分子图中键径方向是一致的,说明π…π作用在本文所讨论的体系中起着很重要的作用.NBO分析表明净电荷迁移从电子给体C2H4,C2H2,C4H6到电子受体OCS,CO2,N2O,迁移数按照B…C2H4相似文献   

Substituent-dependent negative hyperconjugation in 2-aryl-1,3-N,N-heterocycles. fine-tuned anomeric effect?

The epimerization reactions of conformationally inflexible 2-aryl-1,3-N,N-heterocycles were used as model systems to study the role of the nitrogen lone pair-C2 associated antibonding orbital hyperconjugative interactions in the experimentally observed substituent-dependent generalized anomeric effect. The measured reaction free enthalpies were found to correlate well with the sum of the hyperconjugative stabilization energies of all the vicinal donor-acceptor orbital overlaps around C2, obtained from ab initio NBO analysis, and both quantities correlated linearly with the Hammett-Brown substituent constant. The individual stereoelectronic interactions (n(N)-sigma(C2)(-)(N), n(N)-sigma(C2)(-)(Ar), n(N)-sigma(C2)(-)(H)) were also observed to exhibit a substituent dependence, despite their distance from the 2-aryl substituent and their nonperiplanar arrangement. The higher the electron-withdrawing effect of the 2-aryl substituent, the larger was the stabilization for n(N)-sigma(C2)(-)(Ar), while the overlaps n(N)-sigma(C2)(-)(N) and n(N)-sigma(C2)(-)(H) changed in the opposite sense. The different polarization of the acceptor sigma orbitals, caused by the 2-aryl substituent, accounted for the observed propagation of the substituent effect. These results promote a detailed explanation of the useful tautomeric behavior of the 2-aryl-1,3-X,N-heterocycles, and reveal the nature of the connection between the anomeric effect and the Hammett-type linear free energy relationship.     

Thermochemistry of the fluoroformyloxyl radical: a computational study based on coupled cluster theory

The standard enthalpy of formation of FCO(2) (X (2)B(2)) was determined by a computational approach based on coupled cluster theory [CCSD(T)] with energies extrapolated to the basis-set limit, with additional corrections accounting for core-valence correlation, scalar relativity, spin-orbit coupling, and zero-point vibrational motions. Utilizing a variety of independent reaction schemes, our best estimate is Delta(f)H(o)(0)(FCO(2)) = -86.0 +/- 0.6 kcal mol(-1) [Delta(f)H(o)(298) )(FCO(2)) = -86.7 +/- 0.6 kcal mol(-1)], which is shown to be more accurate than previous theoretical and experimental values. The chosen computational procedure was also applied to HCO (X (2)A'), where we find excellent agreement with experiment, and to FCO (X (2)A'), where we recommend an improved value of Delta(f)H(o)(0)(FCO) = -42.1 +/- 0.5 kcal mol(-1) [ Delta(f)H(o)(298)(FCO) = -42.0 +/- 0.5 kcal mol(-1)]. Further theoretical results concern the C-F bond dissociation energy, electron affinity, ionization energy, first and second excitation energies in FCO(2), fluoride ion affinity of CO(2), and equilibrium geometries of the molecules treated presently. For FCO (X (2)A') we propose an improved equilibrium structure: r(e)(CF) = 132.5(2) pm, r(e)(CO) = 116.7(2) pm, and theta(e)(FCO) = 127.8(2)(o).     

铑催化合成气制乙醇反应中CO断键途径的研究

利用程序升温表面反应─红外（ＴＰＳＲ－ＩＲ）动态技术考察ＣＯ吸附物种对氢的反应性能并检验表面反应生成的中间物，结果表明线式ＣＯ对氢的反应性能高于桥式ＣＯ，即线式ＣＯ更可能是活性吸附态；表面反应生成了ＨＣＯ、ＣＨ２等中间物．用键级守恒（ＢＯＣ）－Ｍｏｒｓｅ势方法计算比较了ＣＯ→ＣＨ２过程中各可能基元步骤在Ｒｈ（１１１）面上的反应活化能和反应热，结果表明ＣＯ经其部分氢化物种（如Ｈ２ＣＯ、ＨＣＯＨ）的氢解反应断裂Ｃ─Ｏ键在能量上最有利．根据这些实验结果，提出铑基催化剂上合成气转化反应主要按缔合式机理进行；ＣＯ的优势断键途径为先部分氢化，而后氢助断键．     

The boron-boron single bond in diborane(4) as a non-classical electron donor for hydrogen bonding

An ab initio study of an isomer of diborane(4) [B(2)H(4)] has been carried out at MP2/aug-cc-pVTZ to investigate the ground-state properties of this unusual molecule, a derivative of which has been described in the recent literature. The geometric, electronic and orbital characteristics of B(2)H(4)(4) have been analyzed using AIM, NBO, and ELF methodologies. A region with a high concentration of electron density is located near and along the B-B bond, on the opposite side of this bond relative to the bridging H atoms. This site serves as an electron-donor site to electrophiles, resulting in hydrogen-bonded complexes of B(2)H(4) with proton donors HF, HNC, HCl, HCN, and HCCH, and a van der Waals complex with H(2). These complexes have C(2v) symmetry and stabilization energies that vary from 2 to 27 kJ mol(-1). The SAPT2 energy decomposition analysis shows that the relative importance of the various terms that contribute to the interaction energy depends on the strength of the interaction.     

分子内结构环境对解离能的影响

为了理解化学键的这一结构效应, 本文对具有相同化学键而分子内结构环境不同的系列分子进行了计算研究, 讨论了化学键结构环境对解离能的影响.