Designing catechol‐end functionalized poly(DMAm‐co‐NIPAM) by RAFT with tunable LCSTs

Providing catechol‐end functionality to controlled structure lower critical solution temperature (LCST) copolymers is attractive, given the versatility of catechol chemistry for tethering to nanostructures. Controlled polymer chain lengths with catechol RAFT end groups are of interest to provide tunable LCST behavior to nanoparticles, although these polymerizations are relatively unexplored. Herein, the reactivity ratios for the RAFT copolymerization of N,N‐dimethylacrylamide (DMAm) and N‐isopropylacrylamide (NIPAM) pairs based on catechol‐end RAFT agents using an in situ NMR technique were first determined. Several catechol‐end poly(DMAm‐co‐NIPAM) samples were then prepared using the RAFT agent to provide copolymer. The reactivity ratios for the DMAm‐NIPAM pair were r_DMAm = 1.28–1.31 and r_NIPAM = 0.48–0.51. All the poly(DMAm‐co‐NIPAM) samples were found to have M_n values ≤ 26 kDa and Ð < 1.08 with LCST values ranging from 31 to 92°C, while maintaining a short range of glass transition temperature (T_g = 118–137°C). The difference in LCST values for the catechol functionalized poly(DMAm‐co‐NIPAM) based on 0.5 wt% aqueous buffered solutions at pH 5.5 and 8.5 was found to be <3.0°C. These conditions are suitable for subsequent catechol‐induced coordination and nucleophilic addition chemistry for covalent and noncovalent linkages during subsequent post‐modification. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4062–4070     

Temperature‐induced aggregation of the copolymers of N‐isopropylacrylamide and sodium 2‐acrylamido‐2‐methyl‐1‐propanesulphonate in aqueous solutions

A series of random copolymers of N‐isopropylacrylamide (NIPAM) and sodium 2‐acrylamido‐2‐methyl‐1‐propanesulphonate (AMPS) was synthesized by free‐radical copolymerization. The content of AMPS in the copolymers ranged from 1.1 to 9.6 mol %. The lower critical‐solution temperature (LCST) of copolymers in water increased strongly with an increasing content of AMPS. The influence of polymer concentration on the LCST of the copolymers was studied. For the copolymers with a higher AMPS content, the LCST decreased faster with an increasing concentration than for copolymers with a low content of AMPS. For a copolymer containing 1.1 mol % of AMPS the LCST dropped by about 3 °C when the concentration increased from 1 to 10 g/L, whereas for a copolymer containing 9.6 mol % of AMPS the LCST dropped by about 10 °C in the concentration range from 2 to 10 g/L. It was observed that the ionic strength of the aqueous polymer solution very strongly influences the LCST. This effect was most visible for the copolymer with the highest content of AMPS (9.6 mol %) for which an increase in the ionic strength from 0.2 to 2.0 resulted in a decrease in the LCST by about 27 °C (from 55 to 28 °C), whereas for the copolymer containing 1.1 mol % of AMPS the LCST decreased only by about 6 °C (from 37 to 31 °C) when the ionic strength increased from 0.005 to 0.3. The reactivity ratios for the AMPS and NIPAM monomer pairs were determined using different methods. The values of r_AMPS and r_NIPAM obtained were 11.0–11.6 and 2.1–2.4, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2784–2792, 2001     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

Synthesis and characterization of a poly(N‐isopropylacrylamide) with β‐cyclodextrin as pendant groups

A novel linear poly(N‐isopropylacrylamide) (PNIPA) with β‐cylodextrin (β‐CD) moiety (PNIPA‐β‐CD) was synthesized by the conjugation of β‐CD carrying amino groups (EDA‐β‐CD) onto PNIPA with epoxy groups (P(NIPA‐co‐GMA), M_n = 3.86 × 10⁴), and the related reaction conditions are investigated. PNIPA‐β‐CD was characterized by means of IR, NMR and UV spectroscopes, element analysis, and differential scanning calorimetry (DSC). The number‐average molecular weight (M_n) and the β‐CD content of the obtained PNIPA‐β‐CD are 4.87 × 10⁴ and 18.8 wt %, respectively. PNIPA‐β‐CD can not only respond to temperature stimuli but also include guest molecules. Lower critical solution temperature (LCST) of aqueous PNIPA‐β‐CD solution is similar to that of PNIPA. The association constant (K_a) for PNIPA‐β‐CD with methyl orange (MO) is 2.4 × 10³ L mol^?1 at pH 1.4, which is comparable to that of EDA‐β‐CD (K_a = 2.9 × 10³ L mol^?1). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3516–3524, 2005     

Aqueous solution behavior of p(N-isopropyl acrylamide) in the presence of water-soluble macromolecular species

We report here the polymerization of N-isopropyl acrylamide (NIPAM) via the reversible addition fragmentation chain transfer (RAFT) process. Two trithiocarbonates (S,S′-bis(α,α′-dimethyl-α″-acetic acid)-trithiocarbonate and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid) were used as the chain transfer agents in conjunction with 4,4′-azobis(4-cyanovaleric acid) and 2,2′azobis(2-methylpropionamidine) dihydrochloride as the initiating species. Poly(NIPAM) is a thermo-responsive polymer that has a sharp lower critical solution temperature (LCST). Herein, we investigated the aqueous solution behaviour of well defined p(NIPAM) prepared by the RAFT process as a function of molecular weight (degree of polymerization: 50, 100 and 200) and temperature. Furthermore, we examine the influence of varying concentrations of macromolecular species (neutral polyethylene glycol (M_n - 3400 g/mol) and ionic bovine serum albumin (M_n - 63 000 g/mol)) on the LCST of p(NIPAM). The aqueous solution behaviour was assessed by spectrophotometry, dynamic light scattering and surface tensiometry. The macromolecular additives was found to have a significant effect on the coil to globular transition of the lower molecular weight p(NIPAM).     

Interactions of temperature-responsive anionic polyelectrolytes with a cationic surfactant

The interactions of temperature-responsive copolymers of sodium 2-acrylamido-2-methyl-1-propanesulfonate (AMPS) and N-isopropylacrylamide (NIPAM) with a cationic surfactant, dodecyltrimethylammonium chloride (DTAC), have been studied. The content of AMPS in the copolymers ranged from 1.1 to 9.6 mol%. The surface activity was higher for the polymers with lower AMPS content. It was found that DTAC undergoes association with the polymer chain, forming mixed polymer-surfactant micelles. The values of cac for the polymers were found in fluorescence studies using pyrene as the fluorescent probe. They were in the range 0.9-3.6x10(-3) M and were lower for polymers with higher AMPS content. An increase in DTAC concentration up to about its cmc results in a decrease of the LCST (lower critical solution temperature) of the copolymers, while further increase above the cmc results in an increase of the LCST. The minimum value of LCST in the presence of the surfactant is lower than the LCST of NIPAM homopolymer.     

Stimuli‐responsive cationic terpolymers by RAFT polymerization: Synthesis,characterization, and protein interaction studies

The controlled synthesis and characterization of a range of stimuli responsive cationic terpolymers containing varying amounts of N‐isopropylacrylamide (NIPAM), 3‐(methylacryloylamino)propyl trimethylammonium chloride (MAPTAC), and poly(ethylene glycol)monomethyl methacrylate (PEGMA) is presented. The terpolymers were synthesized using reversible addition‐fragmentation chain transfer (RAFT) polymerization. Compositions of the terpolymers determined using ¹H NMR were in close agreement to the theoretical values determined from the monomer feed ratios. GPC‐MALLS was used to analyze the molecular weight characteristics of the polymers, which were found to have low polydispersities (M_w/M_n 1.1–1.4). The phase transitions were studied as a function of PEGMA and NIPAM content using temperature controlled ¹H NMR and turbidity measurements (UV‐Vis). The relationship between thermal stability and the comonomer ratio of the polymers was measured using thermogravimetric analysis (TGA). Protein interaction studies were performed to determine the suitability of the polymers for biological applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4021–4029, 2008     

Cluster Model of Aggregation of Epoxy-DPP Oligomers in Solutions. Structure of Coatings Based on Epoxy and Epoxy-Phenol Resins

The IR MATIR spectra in the 1535-1680 cm^-1 range were studied for epoxy-DPP resins (M _N = 1650-3400) in coatings on germanium substrate obtained from oligomer solutions in methylene chloride and Cellosolve with the concentration c = 10-50%. The concentration dependences of the relative viscosity of narrow-MWD fractions of epoxy oligomers (M _N = 1500-5300) in chloroform and Cellosolve solutions were studied. The structure of the network of cross-linked polymers based on epoxy (M _N = 2100-3400) and phenol-formaldehyde (M _N = 860) resins was studied by the electron-microscopic silver chloride decoration method. Based on the cluster lattice model, the optimal molecular weight and the concentration regimes were determined for epoxy oligomers in the lacquer composition for can protection.     

Living anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide: Synthesis of well‐defined poly(N‐isopropylacrylamide) having various stereoregularity

Anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide ( 1 ) was carried out with 1,1‐diphenyl‐3‐methylpentyllithium and diphenylmethyllithium, ‐potassium, and ‐cesium in THF at ?78 °C for 2 h in the presence of Et₂Zn. The poly( 1 )s were quantitatively obtained and possessed the predicted molecular weights based on the feed molar ratios between monomer to initiators and narrow molecular weight distributions (M_w/M_n = 1.1). The living character of propagating carbanion of poly( 1 ) either at 0 or ?78 °C was confirmed by the quantitative efficiency of the sequential block copolymerization using N,N‐diethylacrylamide as a second monomer. The methoxymethyl group of the resulting poly( 1 ) was completely removed to give a well‐defined poly(N‐isopropylacrylamide), poly(NIPAM), via the acidic hydrolysis. The racemo diad contents in the poly(NIPAM)s could be widely changed from 15 to 83% by choosing the initiator systems for 1 . The poly(NIPAM)s obtained with Li⁺/Et₂Zn initiator system possessed syndiotactic‐rich configurations (r = 75–83%), while either atactic (r = 50%) or isotactic poly(NIPAM) (r = 15–22%) was generated with K⁺/Et₂Zn or Li⁺/LiCl initiator system, respectively. Atactic and syndiotactic poly(NIPAM)s (42 < r < 83%) were water‐soluble, whereas isotactic‐rich one (r < 31%) was insoluble in water. The cloud points of the aqueous solution of poly(NIPAM)s increased from 32 to 37 °C with the r‐contents. These indicated the significant effect of stereoregularity of the poly(NIPAM) on the water‐solubility and the cloud point in water © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4832–4845, 2006     

Studies of methyl methacrylate–glycidyl methacrylate copolymers: Copolymerization to low molecular weights and modification by ring-opening reaction of epoxy side groups

The copolymerization of methyl methacrylate (MMA) with glycidyl methacrylate (GMA) at 60°C with 2,2′-azobisisobutyronitrile (AIBN) as radical initiator and in the presence of thiophenol (TP) as chain-transfer agent has been investigated. Monomer reactivity ratios for MMA and GMA are found to be r₁ (MMA) = 0.80 ± 0.015 and r₂ (GMA) = 0.70 ± 0.015, from which Q and e values are calculated to be 0.68 and ?0.36 for GMA. The initial rate of copolymerization R_p at 60°C with AIBN (0.02 mole/l.) and TP (0.1, 0.01 mole/l.) were found to increase nonlinearly with increasing GMA concentration in the monomer feed. Homopolymerizations of MMA and GMA monomers were studied in the presence and in the absence of thiophenol. The values of δ (= k_t^1/2/k_p) for MMA and GMA were determined to be 10.25 and 3.00 (mole-sec/l.)^1/2, respectively. Using the values r₁ (MMA), r₂ (GMA), δ₁ (MMA), δ₂ (GMA), and R_p, the cross-termination constants ? for MMA–GMA monomers were determined (average value ? = 0.42). The increase in R_p values with increasing GMA content has been attributed to the cross-termination of MMA–GMA radicals. The transfer constant of TP has also been determined for GMA and found to be 1.00. A MMA–GMA copolymer of low molecular weight, containing 2.01% of oxirane oxygen, was modified by opening of the oxirane ring of GMA by reaction with diethanolamine (DEA). The reaction was carried out at 70 ± 1°C, the copolymer content of epoxy groups and the amine being assumed to be in the molar ratio of 1:4. Addition of a hydrogen-bond acceptor like nitrobenzene decreases, while addition of a hydrogen-bond donor like phenol increases the rate of epoxy ring opening with DEA. This indicates that a hydrogen-bonded intermediate is involved in this reaction and that it weakens the epoxy ring and enhances the rate of its opening with DEA. From the studies of the conversion rates, existence of a “nonspecific” side reaction has been shown which involves the reaction of the terminal epoxy groups of the copolymer and the hydroxyl groups of DEA or formed in the reaction with DEA (involves a chain coupling). DEA can be trifunctional in this reaction. This has been further confirmed from the increase of number-average molecular weights M?_n of the copolymers resulting from this coupling and the nitrogen content in the copolymers after modification with DEA.     

Synthesis and thermoresponsive property of end‐functionalized poly(N‐isopropylacrylamide) with pyrenyl group

N–Isopropylacrylamide (NIPAM) was polymerized using 1‐pyrenyl 2‐chloropropionate (PyCP) as the initiator and CuCl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as the catalyst system. The polymerizations were performed using the feed ratio of [NIPAM]₀/[PyCP]₀/[CuCl]₀/[Me₆TREN]₀ = 50/1/1/1 in DMF/water of 13/2 at 20 °C to afford an end‐functionalized poly(N‐isopropylacrylamide) with the pyrenyl group (Py–PNIPAM). The characterization of the Py–PNIPAM using matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry provided the number–average molecular weight (M_n,MS). The lower critical solution temperature (LCST) for the liquid–solid phase transition was 21.7, 24.8, 26.5, and 29.3 °C for the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000, respectively; hence, the LCST was dramatically lowered with the decreasing M_n,MS. The aqueous Py–PNIPAM solution below the LCST was characterized using a static laser light scattering (SLS) measurement to determine its molar mass, M_w,SLS. The aqueous solutions of the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000 showed the M_w,SLS of 586,000, 386,000, 223,000, and 170,000, respectively. Thus, lowering the LCST for Py–PNIPAM should be attributable to the formation of the PNIPAM aggregates. The LCST of 21.7 °C for Py–PNIPAM with the M_n,MS of 3000 was effectively raised by adding β‐cyclodextrin (β‐CD) and reached the constant value of ～26 °C above the molar ratio of [β‐CD]/[Py–PNIPAM] = 2/1, suggesting that β‐CD formed an inclusion complex with pyrene in the chain‐end to disturb the formation of PNIPAM aggregates, thus raising the LCST. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1117–1124, 2006     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Super macroporous poly(N‐isopropyl acrylamide) cryogel for separation purpose

Polymers that can respond reversibly by changing their physical or chemical properties are recognized as stimuli‐responsive polymers. The renowned temperature‐sensitive polymer is poly(N‐isopropyl acrylamide) (p(NIPAM)), and here, homopolymeric supermacroporous p(NIPAM)) cryogel was synthesized via cryopolymerization technique at cryogenic condition (below melting point of solvent, −18°C). Then, the prepared p(NIPAM) cryogel was characterized via scanning electron microscopy, Fourier transform infrared radiation spectrometer, and thermogravimetric analyzer. The lower critical solution temperature (LCST) value of the prepared p(NIPAM) cryogel was determined from % swelling equilibrium swellings at various temperatures, 20, 25, 30, 35, 40, 45, and 50°C, respectively. Furthermore, the pore volume and porosity of p(NIPAM) cryogels were compared below and above the LCST values. Finally, the separation capability of p(NIPAM) cryogels for some molecules such as tannic acid, gallic acid, nicotine (N), and caffeine (C) was investigated at the below and above the LCST values.     

Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

Synthesis of β‐myrcene/glycidyl methacrylate statistical and amphiphilic diblock copolymers by SG1 nitroxide‐mediated controlled radical polymerization

Bulk nitroxide‐mediated polymerization (NMP) of β‐myrcene (My)/glycidyl methacrylate (GMA) mixtures with varying GMA molar feed fraction (f_GMA,0 = 0.10–0.91) was accomplished at 120 °C, initiated by SG1‐based alkoxyamine bearing a N‐succinimidyl ester group (NHS‐BlocBuilder). Low dispersity My/GMA copolymers (Đ < 1.56) with slight number‐average molecular weights (M_ns) deviations from predicted values (M_n,theo with M_n/M_n,theo > 70%) were obtained. The copolymerization was revealed to be statistical, confirmed via Fineman–Ross (r_My = 0.80 ± 0.31 and r_GMA = 0.71 ± 0.15) and Kelen‐Tüdös (r_My = 0.48 ± 0.12 and r_GMA = 0.53 ± 0.18) approaches. Glass transition temperature (T_g) of the statistical P(My‐stat‐GMA)s increased from −77 to +43 °C as the GMA molar fraction incorporated (F_GMA) increased from 0.10 to 0.90. High SG1 chain‐end fidelity for My‐rich and GMA‐rich P(My‐stat‐GMA)s was assessed by phosphorus nuclear magnetic resonance (³¹P NMR, SG1 fraction >69 mol %) and chain‐extensions in toluene with My, GMA and styrene (S) (monomodal shift in M_n). Last, diblock P(My‐b‐GMA) was made and treated with morpholine to produce amphiphilic copolymer able to self‐organize into micelles. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 860–878     

Highly branched stimuli responsive poly[(N-isopropyl acrylamide)-co-(1,2-propandiol-3-methacrylate)]s with protein binding functionality

Highly branched poly(NIPAM) have been prepared using the technique of reversible addition-fragmentation chain transfer (RAFT) polymerisation using a chain transfer agent that allows the incorporation of imidazole functionality in the polymer chain-ends. The lower critical solution temperature (LCST) of the polymers can be controlled by the amount of hydrophobe and GMA incorporated during copolymerisation procedures. These thermally responsive "smart" polymers were used to purify a His-tagged BRCA-1 protein fragment by affinity precipitation. [Diagram: see text]     

The effect of structure on the thermoresponsive nature of well‐defined poly(oligo(ethylene oxide) methacrylates) synthesized by ATRP

Statistical copolymers of di(ethylene glycol) methyl ether methacrylate (MEO₂MA) and tri(ethylene glycol) methyl ether methacrylate (MEO₃MA) were synthesized by atom transfer radical polymerization (ATRP) providing copolymers with controlled composition and molecular weights ranging from M_n = 8,300–56,500 with polydispersity indexes (M_w/M_n) between 1.19 and 1.28. The lower critical solution temperature (LCST) of the copolymers increased with the mole fraction of MEO₃MA in the copolymer over the range from 26 to 52 °C. The average hydrodynamic diameter, measured by dynamic light scattering, varied with temperature above the LCST. These two monomers were also block copolymerized by ATRP to form polymers with molecular weight of M_n = 30,000 and M_w/M_n from 1.12 to 1.21. The LCST of the block copolymers shifted toward the LCST of the major segment, as compared to the value measured for the statistical copolymers at the same composition. As temperature increased, micelles, consisting of aggregated PMEO₂MA cores and PMEO₃MA shell, were formed. The micelles aggregated upon further heating to precipitate as larger particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 194–202, 2008     

Copolymerization of Tri-n-butyltin Acrylate and Tri-n-butyltin Methacrylate Monomers with Vinyl Monomers Containing Functional Groups

A new approach to obtaining thermoset organotin polymers, which permits control of crosslinking site distribution and, through it, a better control of properties of organotin antifouling polymers, is reported. Tri-n-butyltin acrylate and tri-n-butyltin methacrylate monomers were prepared and copolymerized, by the solution polymerization method with the use of free-radical initiators, with several vinyl monomers containing either an epoxy or a hydroxyl functional group. The reactivity ratios were determined for six pairs of monomers by using the analytical YBR method to solve the differential form of the copolymer equation. For copolymerization of tri-n-butyltin acrylate (M₁) with glycidyl acrylate (M₂), these reactivity ratios were n = 0.295 ± 0.053, r₂ = 1.409 ± 0.103; with glycidyl methacrylate (M₂) they were r₁ = 0.344 ± 0.201, r₂ = 4.290 ± 0.273; and with N-methylolacrylamide (M₂) they were r₁ = 0.977 ± 0.087, r₂ = 1.258 ± 0.038. Similarly, for the copolymerization of tri-n-butyltin methacrylate (Mi) with glycidyl aery late (M₂) these reactivity ratios were r₁ = 1.356 ± 0.157, r₂ = 0.367 ± 0.086; with glycidyl methacrylate (M₂) they were r₁ = 0.754 ± 0.128, r₂ = 0.794 ± 0.135; and with N-methylolacrylamide (M₂) they were r₁ ?4.230 ± 0.658, r₂ = 0.381 ± 0.074. Even though the magnitude of error in determination of reactivity ratios was small, it was not found possible to assign consistent Q,e values to either of the organotin monomers for all of its copolymerizations. Therefore, Q,e values were obtained by averaging all Q,e values found for the particular monomer, and these were Q = 0.852, e = 0.197 for the tri-n-butyltin methacrylate monomer; and Q = 0.235, e = 0.401 for the tri-n-butyltin acrylate monomer. Since the reactivity ratios indicate the distribution of the units of a particular monomer in the polymer chain, the measured values are discussed in relation to the selection of a suitable copolymer which, when cross-linked with appropriate crosslinking agents through functional groups, would give thermoset organotin coatings with an optimal balance of mechanical and antifouling properties.     

Photoisomerizable and Thermoresponsive N‐isopropylacrylamide–Surfmer Copolymer Hydrogels Prepared upon Electrostatic Self‐Assembly of an Azobenzene Bolaamphiphile

Photoreactive and thermoresponsive N‐isopropylacrylamide (NIPAM)–surfmer copolymer hydrogels containing 4,4′‐di(6‐sulfato‐hexyloxy)azobenzene (DSHA) dianions are described. The functional hydrogels are obtained in a two steps. First a micellar aqueous solution of (11‐(acryloyloxy)undecyl)trimethylammonium bromide (AUTMAB) and NIPAM is exposed to ⁶⁰Co‐gamma irradiation, and a thermoresponsive copolymer gel is obtained. Second, DSHA is included by shrinking the gel at 50 °C and subsequent reswelling in an aqueous solution of DSHA disodium salt at 20 °C. Reswelling is accompanied by electrostatic adsorption of DSHA dianions at the positively charged AUTMAB headgroups replacing the bromide ions. Gels containing trans‐DSHA are transparent yellow at room temperature (λ_max = 370 nm), while gels containing cis‐rich DSHA are orange (λ_max = 460 and 330 nm). Energy dispersive X‐ray measurements indicate that 41% of the bromide ions are exchanged if trans‐DSHA is used for adsorption, and only 7.5% if cis‐DSHA is used. The incorporation of DSHA lowers the lower critical solution temperature (LCST) from 34 to 32 °C. Below the LCST, DSHA can be switched from the trans‐ to the cis‐rich state and vice versa upon irradiation with UV (λ = 366 nm) or visible light (λ ≥ 450 nm). Above the LCST no photoreaction takes place.     

Influence of multiple stimuli on the lower critical solution temperature of new cationic poly(N‐acryloyl‐N′‐ethylpiperazine‐co‐N‐isopropylacrylamide) solutions

New multi‐stimuli responsive cationic copolymers based on N‐acryloyl‐N′‐ethyl piperazine (AcrNEP) and N‐isopropylacrylamide (NIPAM) were prepared by thermal free‐radical solution polymerization in dioxane at 75 °C. The chemical composition of the copolymers was determined by ¹H NMR spectroscopy and was found that the copolymers were slightly rich in NIPAM content than that of AcrNEP. The reactivity of the two monomers for the copolymerization reaction was evaluated by the extended Kelen‐Tüdös method. The distribution of monomer sequence in the copolymer chain was estimated using the terminal copolymerization model. The maximum tendency to alternation (～ 70%) was at 60 mol % of AcrNEP in the monomer feed. The copolymers were readily soluble in water at room temperature at all compositions and exhibited well‐defined lower critical solution temperature (LCST) phenomenon. The influence of various stimuli such as pH, temperature, simple inorganic salts, and surfactants on the LCST of the copolymers was studied in detail. Simple inorganic salts such as sodium chloride, sodium bromide, and sodium sulfate showed a salting‐out effect while sodium iodide showed a salting‐in effect. The salting‐out coefficient of the salts were calculated using the Sestchenow method, and the salting trend followed the order SO₄^2? > Cl^? > Br^? > I^?. The divalent salt was more effective in lowering the LCST than the monovalent salts. The cationic surfactant hexadecyl trimethylammonium bromide at concentrations above the critical micelle concentration caused a gradual increase in the LCST of the copolymer solutions. The intrinsic viscosity and light scattering behavior of the copolymers in water and in sodium chloride solutions were studied in detail. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1175–1183