Diastereoselective and enantioselective alkaline-hydrolysis of 2-aryl-1-cyclohexyl acetate: a CAL-B catalyzed deacylation/acylation tandem process

Candida antarctica lipase proved to be a particularly efficient lipase for the resolution of racemic 2-arylcyclohexyl acetate in hydrolysis reaction with Na₂CO₃ in an organic medium. The (1R,2S)-trans-2-arylcyclohexanols 2a–2d were obtained with high ee values (up to >99%) and the selectivity reached E > 200. The influence of the enol ester and the solvent on (±)-trans-2-arylcyclohexanol in the CAL-B catalyzed acylation was also studied and compared with the deacylation. The CAL-B exhibits a better affinity for the alkaline hydrolysis reaction compared with acylation with the enol esters in the same organic solvents. The best conditions were applied to resolve a stereoisomeric mixture cis/trans-2-phenyl-1-cyclohexanol and its corresponding acetate by acylation and deacylation. The obtained results show a highly enantio- and diastereoselectivity of the CAL-B during the acylation and the deacylation in favor of the trans-(R)-enantiomer product. The resolution of a mixture of cis/trans-2-arylcyclohexanols was an easy, convenient approach to provide only one stereoisomer of a mixture of four with high enantiomeric excess.     

Transformation of racemic ethyl 3-hydroxybutanoate into the (R)-enantiomer exploiting lipase catalysis and inversion of configuration

Racemic ethyl 3-hydroxybutanoate rac-1 was transformed into ethyl (R)-acetoxybutanoate (ee = 92%) with 85–90% chemical yields using enantioselective acylation with isopropenyl acetate in the presence of Candida antarctica lipase B (CAL-B, Novozym 435) under solvent-free conditions, followed by mesylation of the unreacted (S)-alcohol in the reaction mixture and inversion of configuration with cesium acetate in DMF in one pot. When the (R)-acetoxybutanoate was subjected to alcoholysis with ethanol and CAL-B, enantiopure (R)-1 (ee >99%) was produced.     

Chiral linear polymers bonded alternatively with salen and 1,4-dialkoxybenzene: synthesis and application for Ti-catalyzed asymmetric TMSCN addition to aldehydes

The synthesis of chiral linear polymers 1a–b having salen and 1,4-dioctyloxybenzene as alternate segments has been accomplished. The GPC analysis showed the molecular weights corresponding to ca. 15 (M_w = 10,999, M_n = 9165 and PDI = 1.20) repeating units for 1a and ca. 8 (M_w = 8547, M_n = 7883 and PDI = 1.08) repeating units for 1b. Polymers 1a–b have been studied with Ti(OⁱPr)₄ as a recyclable catalyst for the asymmetric addition of TMSCN to aldehydes while the selectivity of the polymer catalyst is identical to that of the monomer. The reactions are efficient affording the cyanohydrins with up to 88% ee. The selectivity of the polymer based catalyst 9a is found to be the same to that of the monomer 10a. The reaction provides the advantages of simplified product isolation and easy recovery and recyclability of polymer catalyst 9a without any loss of activity or selectivity.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

Highly enantioselective enzymatic resolution of aromatic β-amino acid amides with Pd-catalyzed racemization

The kinetic resolution of an aromatic β-amino acid amide 3a–d via N-acylation was explored with two lipases, Candida antarctica lipase A (CALA) and Pseudomonas stutzeri lipase (PSL). The PSL-catalyzed resolution proceeded with excellent enantioselectivity (E = >400) to give both acylated products and unreacted substrates in enantiopure forms. Three additional aromatic β-amino acid amides 3b–d were also resolved by PSL with a high level of enantioselectivity (E = >200). The PSL-catalyzed resolution of 3a was coupled with a Pd-catalyzed racemization to obtain enantiopure N-acylated product (R)-4a (>99% ee) in high yield (90%).     

Enzymatic reactions for the preparation of homocalycotomine enantiomers

Homocalycotomine enantiomers (R)-4 and (S)-4 were prepared by the Candida antarctica lipase B (CAL-B)-catalysed asymmetric O-acylation of N-Boc-protected 2-(6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolin-1-yl)ethanol (±)-1. The preliminary small-scale experiments were performed either in a continuous-flow system or as batch reactions, while the preparative-scale resolution was carried out in two steps with vinyl acetate as the acyl donor in the presence of Et₃N and Na₂SO₄ in toluene at 3 °C, as a batch reaction. Treatment of the resulting amino alcohol (S)-1 and amino ester (R)-3 (ee ?94%) with 18% HCl, and then with 5 M NaOH, furnished the desired (R)-4 and (S)-4 without a decrease in the enantiomeric excess (ee ?94%).     

Correlation between molecular structure and optical properties for the bis(2-(2-hydroxyphenyl)benzothiazolate) complexes

A series of methyl-substituted bis(2-(hydroxyphenyl)benzothiazolate)zinc derivatives [Zn(n-MeBTZ)₂, n = 3 (1a), 4 (1b), 5 (1c)] were synthesized to investigate the correlation between molecular structures and optical properties. The results indicate that the blue-emitting (λ_max = 470 nm) complex 1b is monomer with a higher PL quantum efficiency than complexes 1, 1a, 1c. Two green-emitting (λ_max = 507 nm and 499 nm) complexes 1a and 1c have special bi-molecular structures. The molecular structure for Zn(BTZ)₂ (complex 1) is dimer. Bilayer organic light-emitting devices were fabricated by using these complexes as emitting layer. The maximum emission wavelengths of the devices are in the range of 501–553 nm. The devices show turn-on voltages at 9.2, 12.7, 2.3 and 10.7 V for complex 1, 1a, 1b, and 1c, respectively. In particular, the device with complex 1b shows a higher brightness than the other complexes under the same conditions.     

Synthesis and structure of a new scorpionate-dithio carboxyl oxovanadium complex and an organic dithio carboxyl compound

A new complex of oxovanadium(IV), V₂O₂[(HB(pz)₃)₂(pyrro)₂ (1) and a dimer-dithio carboxyl compound (C₅H₈NS₂)₂ (2) have been synthesized by the reaction of VOSO₄·nH₂O with NaHB(pz)₃ and pyrrolidine dithio carboxylic acid ammonium salt. They were characterized by element analysis, IR spectra, UV–vis spectra and X-ray diffraction. Structural analyses of 1 and 2 gave the following parameters: 1, triclinic, P-1, a = 7.732(4) Å, b = 14.285(8) Å, c = 17.802(9) Å, α = 101.314(8)°, β = 92.682(9)°, γ = 92.228(9)°, V = 1923.6(18) Å³, and Z = 4; 2, monoclinic, C2/c, a = 13.857(2) Å, b = 10.4213(18) Å, c = 9.436(2) Å, β = 97.099(2), V = 1352.1(4) Å³, and Z = 4. In complex 1, vanadium atom adopts a distorted tetragonal bipyramid structure, which is typical for oxovanadium(IV) complexes. Compound 2 is a dimer-dithio carboxyl compound with S–S bond. In addition, thermal analysis was performed for analyzing the stabilization of the complexes.     

Palladium(II) complexes with the new P,N-type ligand (2-oxazoline-2-ylmethyl)di-isopropylphosphine as intermediates in CO/ethylene or CO/methyl acrylate insertion

The ligand (i-Pr)₂PCH₂(oxazoline) (1a), of the P,N-donor type, was reacted with [PdMeCl(COD)] to yield the square planar methylpalladium(II) complex [PdClMe(P,N)] (P,N = 1a) (2a), from which the complex [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) was obtained by AgOTf-promoted chloride abstraction. The alkyl complexes

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe) have been isolated from the initial CO/ethylene or CO/methyl acrylate insertion steps into the Pd–Me bond of 3a, respectively, and spectroscopically characterized. Complexes 2a, 3a and 7a have been fully characterized by single crystal X-ray diffraction. Complex 7a is still a rare example of a structurally characterized CO/methyl acrylate stepwise insertion product. These complexes are relevant to the alternating copolymerization of olefins and carbon monoxide catalyzed by palladium complexes. In addition, the centrosymmetric dinuclear complex trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) has been obtained and characterized by X-ray diffraction; it appears to be the first dinuclear complex of the type [Pd(μ-Cl)(P,N)]₂ to be characterized by X-ray crystallography.

Résumé

Le ligand (i-Pr)₂PCH₂(oxazoline) (1a), de type donneur P,N, réagit avec [PdClMe(COD)] pour former le complexe plan carré méthylpalladium(II) [PdClMe(P,N)] (P,N = 1a) (2a), à partir duquel le complexe [PdMe(P,N)OTf] (OTf = OSO₂CF₃) (3a) a été obtenu par abstraction de chlorure à l'aide de AgOTf. Les complexes alkyles

(P,N = 1a) (5a, R = H; 7a, R = C(O)OMe), ont été isolés lors des premières étapes d'insertion de CO/éthylène ou de CO/acrylate de méthyle, respectivement, dans la liaison Pd–Me de 3a, et caractérisés par méthodes spectroscopiques. Les complexes 2a, 3a et 7a ont été complètement caractérisés par diffraction des rayons X sur monocristal. Le complexe 7a est un exemple encore rare de produit d'insertion par étapes de CO/acrylate de méthyle qui ait été caractérisé structuralement. Ces complexes sont pertinents pour la copolymérisation alternée d'oléfines et de monoxyde de carbone catalysée par les complexes du palladium. En outre, le complexe dinucléaire centrosymétrique trans-[Pd(μ-Cl){(i-Pr)₂PCH₂(oxazoline)}]₂(OTf)₂ (6) a été obtenu et caractérisé par diffraction des rayons X; il s'agit du premier complexe dinucléaire de type [Pd(μ-Cl)(P,N)]₂ à être caractérisé par diffraction des rayons X.     

Heterocycles 35. CaL-B mediated synthesis of enantiomerically pure (R)- and (S)-ethyl 3-(2-arylthiazol-4-yl)-3-hydroxypropanoates

Herein we present the lipase catalyzed synthesis of four new enantiomerically pure (R)- and (S)-ethyl 3-(2-arylthiazol-4-yl)-3-hydroxypropanoates and their butanoates by enzymatic enantioselective acylation of the racemic alcohols rac-1a–d and by ethanolysis of the corresponding racemic esters rac-2a–d mediated by lipase B from Candida antarctica (CaL-B) in organic solvents. In terms of stereoselectivity and activity, both procedures, the acylation and alcoholysis, are successful (50% conversion, E ≫ 200). The absolute configuration of the resolution products was determined by a detailed ¹H NMR study of the Mosher’s derivatives of (S)-1a.     

Hybrid inorganic–organic frameworks containing magnesium: Synthesis and structures of magnesium squarate,diglycolate, and glutarate,and potassium magnesium cyclobutanetetracarboxylate

Four new magnesium containing metal–organic hybrid compounds have been synthesized in an effort to prepare low-density materials for hydrogen storage. The compounds were prepared hydrothermally and characterized using single crystal X-ray diffraction. Three of these compounds are analogs of known transition metal structures with squarate (I, Pn-3n, a = 16.276(5) Å), diglycolate (II, P2₁2₁2₁, a = 6.860(1) Å, b = 9.993(1) Å, c = 10.884(1) Å, R₁ = 0.0341), and glutarate (III, R-3, a = 10.744(2) Å, c = 28.677(5) Å, R₁ = 0.0554) ligands; the fourth is a novel structure using cyclobutanetetracarboxylate (IV, Pccn, a = 9.382(1) Å, b = 14.410(2) Å, c = 8.725(1) Å, R₁ = 0.0465) which contains potassium as well as magnesium cations.     

Syntheses,structures and single-molecule magnetic behaviors of two dicubane Mn4 complexes

The reaction of MnX₂ · 4H₂O (X = Cl or Br) with 2,6-bis(hydroxymethyl)-4-methylphenol (H₃L) and NaOH in methanol solution yielded two tetranuclear manganese complexes, [Mn₄(HL)₄(MeOH)₄Cl₂] (1) and [Mn₄(HL)₄(MeOH)₄Br₂] (2). Both compounds crystallize in the monoclinic space group C₂/c with cell parameters: a = 26.0945(19) Å, b = 11.4999(8) Å, c = 21.2188(16) Å, β = 121.050(1)° and z = 4 for 1 · 2Et₂O; a = 25.8145(3) Å, b = 11.6734(2) Å, c = 21.3956(3) Å, β = 120.1277(6)° and z = 4 for 2 · 2Et₂O. Both complexes consist of a mixed-valence dicubane structure, which comprises two Mn^II and two Mn^III ions. Magnetic susceptibilities and magnetization of complexes 1 and 2 in the solid state indicate that two clusters have an S = 9 ground state. Frequency-dependent out-of-phase signals of alternating current magnetic susceptibilities were observed in the low temperature range (<3 K) for both complexes indicating a slow magnetic relaxation.     

Versatile Ru-based metathesis catalysts designed for both homogeneous and heterogeneous processes

The synthesis of new ruthenium-based catalysts applicable for both homogeneous and heterogeneous metathesis is described. Starting from the Hoveyda-Grubbs first generation (1) and the Hoveyda-Grubbs second generation (2) catalysts the homogeneous catalysts [RuCl((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (4: R = Et, R′ = H; 5: R = R′ = Me) (SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) were prepared by substitution of one chloride ligand with trialkoxysilyl functionalized silver carboxylates (RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COOAg (3a: R = Et, R′ = H; 3b: R = R′ = Me). These homogeneous ruthenium-species are among a few known examples with mixed anionic ligands. Exchange of both chloride ligands afforded the catalysts [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (9: R = Et, R′ = H; 11: R = R′ = Me) and [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(PCy₃)] (8: R = Et, R′ = H; 10: R = R′ = Me). The reactivity of the new complexes was tested in homogeneous ring-closing metathesis (RCM) of N,N-diallyl-p-toluenesulfonamide and TONs of up to 5000 were achieved. Heterogeneous catalysts were obtained by reaction of 4, 5 and 8–11 with silica gel (SG-60). The resultant supported catalysts 4a, 5a, 8a–11a showed reduced activity compared to their homogenous analogues, but rival the activity of similar heterogeneous systems.     

A new luminescent sulfate bridged dimeric copper(II) complex with DNA binding and SO2 fixation ability: Synthesis and structure

New luminescent mononuclear and dinuclear copper(II) (S = 1/2) complexes [Cu(HL)(H₂O)₂](ClO₄)₂ (1a) and [Cu₂(HL)₂(μ-SO₄)₂]·2H₂O (1b) were synthesized with the acyclic tridentate pyridine-2-carboxaldehyde-2-pyridylhydrazone ligand, HL (1). Interestingly, the mononuclear complex 1a can be converted into the disulfate bridged dimeric copper(II) complex 1b by passing freshly prepared SO₂ through the basic medium. On excitation at 290 nm, the ligand fluoresces at 364 nm due to an intraligand ¹(π–π1) transition. Upon complexation with copper(II), the emission peak is slightly blue shifted (356 nm, F/F₀ 0.76 for 1a and 354 nm, F/F₀ 0.89 for 1b) with a little quenching in the emission intensity. The association constants (K_ass (5.06 ± 0.004) × 10⁴ for 1a and K_ass (5.46 ± 0.006) × 10⁴ for 1b at 298 K) and the thermodynamic parameters have been determined by UV–Vis spectroscopy. The molecular structure of the complex 1b (Cu?Cu 4.456 Å) has been determined by single crystal X-ray diffraction studies. The complex 1b exhibits a strong interaction towards DNA as revealed from the K_b (intrinsic binding constant) 6.3 × 10⁴ M^?1 and K_sv (Stern–Volmer quenching constant) 2.93 values.     

Chemoenzymatic synthesis of piperoxan,prosympal, dibozane,and doxazosin

The synthesis of both enantiomers of 1,4-benzodioxan-2-carboxylic acid 1, a key synthetic intermediate for the therapeutic agents piperoxan, prosympal, dibozane, and doxazosin was achieved with good yields and high enantioselectivities via the Arthrobacter sp. lipase catalyzed kinetic resolution of ester (±)-17a. The influence of the co-solvents and the immobilization of the lipase upon kinetic resolution demonstrated that immobilized whole cells, in the presence of n-butanol as a co-solvent, resulted in the optimal resolution of the substrate (ee ～99%, E = 535) at 258 mmol (50 g/L) substrate concentration.     

Asymmetric hydrogenation reactions with Rh and Ru complexes bearing phosphine–phosphites with an oxymethylene backbone

Phosphine–phosphites 3a and 3b, derived from diphenylhydroxymethyl phosphine have been prepared. From these ligands [Rh(COD)(3a)]BF₄ 5a and RuCl₂(3b)[(S,S)-DPEN] 6b (DPEN = 1,2-diphenylethylenediamine) were synthesized and their structure determined by X-ray diffraction. Ligands 3 are characterized by a small bite angle of 83°. In addition, 5a led to an active catalyst for the hydrogenation of olefins, giving enantioselectivities of up to 96% ee. Likewise, compound 6b showed good activity and enantioselectivity in the hydrogenation of N-1-phenyl ethylidene aniline and a completed reaction at S/C = 500 in 24 h with 83% ee.     

The effect of the migrating group structure on enantioselectivity in lipase-catalyzed kinetic resolution of 1-phenylethanol

We have studied the effects of the acyl moiety on the enantioselectivity of three lipases: Candida antarctica B, Pseudomonas cepacia and Candida cylindracea, frequently used in kinetic resolutions by acylation or hydrolysis. The size of the acyl group was examined using various enol esters during the transesterification of 1-phenylethanol and the hydrolysis of the corresponding phenylethylesters. C. antarctica-B lipase showed the highest selectivity in the transesterification of 1-phenylethanol with isopropenyl and vinyl acetate, vinyl decanoate, vinyl laurate, (E > 200). The esters 1-phenyl -ethyl-acetate, decanoate and laurate are also hydrolyzed with high selectivities (E > 150) with CAL-B. The results can be correlated to the three-dimensional form of each lipase. The effect of the migrating group on the reactivity and selectivity of the lipases are discussed for both reactions.     

Catalytic dehydrocoupling of thienyl/furyl-substituted carbosilanes – Synthesis and characterization of functional poly(hydrosilane)s [RMe2Si(CH2)xSiH]n, (R = 2-Th, 4-Me-2-Th, 2-Fu, 5-Me-2-Fu; x = 2 and 3)

The carbosilanes RMe₂Si(CH₂)_xSiH₃, [R = 2-Th (1a, 2a), 4-Me-2-Th (3a, 4a), 2-Fu (5a, 6a), 5-Me-2-Fu (7a, 8a); x = 2 and 3], with primary SiH₃ end groups undergo a facile dehydropolymerization under ambient conditions (50 °C, 48 h) in presence of Cp₂TiCl₂/2.2 n-BuLi catalyst to afford the corresponding poly(hydrosilane)s 1–8 bearing carbosilyl side chains appended with thienyl/furyl groups. These have been characterized by GPC, IR, multinuclear (¹H, ¹³C{¹H}, ²⁹Si{¹H}) NMR, UV and PL spectral studies.     

Preparation of a chiral synthon for an HBV inhibitor: enzymatic asymmetric hydrolysis of (1α,2β,3α)-2-(benzyloxymethyl)cyclopent-4-ene-1,3-diol diacetate and enzymatic asymmetric acetylation of (1α,2β,3α)-2-(benzyloxymethyl)cyclopent-4-ene-1,3-diol

Enantioselective asymmetric hydrolysis of (1α,2β,3α)-2-(benzyloxymethyl)-cyclopent-4-ene-1,3-diol diacetate 1 to the corresponding (+)-monoacetate 2 was carried out using lipase PS-30 from Pseudomonas cepacia or pancreatin. A reaction yield of 85 M % with an enantiomeric excess (ee) of 98% was obtained. Using pancreatin, a reaction yield of 75 M % with an ee of 98.5% was obtained. Asymmetric acetylation of (1α,2β,3α)-2-(benzyloxymethyl)-cyclopent-4-ene-1,3-diol 3 to the corresponding (−)-monoacetate 4 was carried out using lipase PS-30 with isopropenyl acetate as the acylating agent. A reaction yield of 80 M % with an ee of 98% was obtained for (−)-monoacetate 4.     

Stereospecific polymerization of propylene with group 4 ansa-fluorenylamidodimethyl complexes

Group 4 [η¹:η³-tert-butyl(dimethylfluorenylsilyl)amido]dimethyl complexes [t-BuNSiMe₂Flu]MMe₂ (M = Ti, 1; Zr, 2; Hf, 3) were synthesized in a one-pot synthesis starting from the ligand, MeLi and MCl₄ (M = Ti, Zr, Hf), respectively. The structures of these complexes were determined by X-ray crystallography and the results obtained revealed that the fluorenyl ligand coordinates to center metal in a η³-manner irrespective of center metal employed. Propylene polymerization was conducted at 0 or 20 °C in toluene by 1–3 combined with dried methylaluminoxane (MAO), which was prepared from the toluene solutions of MAO by removing free trialkylaluminiums, and HNMe₂PhB(C₆F₅)₄ in the presence of triisobutylaluminium. The 1–dried MAO system gave the polymer with syndiotactic triad (rr) of 63% at 0 °C, whereas 2 and 3 did not give any polymer in the same conditions. The 2–dried MAO system gave the polymer with the highest syndiotacticity (rr = 97%) at 20 °C, although the activity was low. The 3–dried MAO system did not give any polymer even at 20 °C. When HNMe₂PhB(C₆F₅)₄ was used in place of dried MAO at 20 °C, 1 gave almost atactic polymer, while 2 and 3 gave highly syndiotactic one (rr > 90%). These results indicate that the catalytic performance strongly depended on the center metal of the ansa-fluorenylamidodimethyl complexes as well as cocatalysts employed.