Macroporous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrices for cartilage tissue engineering

Polymer scaffold systems consisting of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) were investigated for possible application as a matrix for the three-dimensional growth of chondrocyte culture. The PHBV scaffolds were fabricated by a compression moulding, thermal processing and salt particulate leaching method without using organic solvent. The porous structure of the scaffolds was investigated with an optical microscope (OM) and scanning electron microscope (SEM) and the porosity was calculated. Then, the chondrocytes were cultured on the PHBV scaffolds for lone time to investigate whether it can be applied to construct the cartilage tissue in vitro. The results showed that the chondrocytes maintained their activity, fully expressed their phenotype and produced the extracellular matrix after incubation in vitro on the scaffolds for 7 days. In addition, in the prolonged incubation time, the percent of chondrocytes in their nature round morphology increased with an increase in the incubation period and they could synthesize the type II collagen and cartilage-specific proteoglycans. All of these results showed that the PHBV scaffolds had the potential to be used as chondrocytes carrier for cartilage engineering.     

Collagen nanofiber-covered porous biodegradable carboxymethyl chitosan microcarriers for tissue engineering cartilage

Nanofibrous collagen-coated porous carboxymethyl chitosan microcarriers (CMC-MCs) were successfully fabricated for use as injectable cell microcarriers. A modified phase separation method combined with temperature controlled freeze-extraction was used for formulating the CMC-MCs. Collagen nanofibers were immobilized onto the surfaces of the CMC-MCs via covalently anchoring some collagen molecules first and more molecules self-assembling into nano-scale fibrous networks afterward. Scanning electron microscopy and hydroxyproline colorimetry analysis revealed that more collagen was immobilized on the CMC-MCs with collagen molecules anchored initially. In vitro cell culture revealed that chondrocytes could adhere, proliferate, and remain differentiated on the nanofiber-coated CMC-MCs. Optical microscopy and confocal laser scanning microscopy showed that chondrocytes grew to confluence on the CMC-MCs within 3 days post-seeding. Subsequently, several confluent CMC-MCs attached to each other, forming tissue-like aggregates after 7 days culture. The mRNA expression of type II collagen was much stronger in chondrocytes cultured on the nanofiber-coated CMC-MCs for 7 days than those cultured in 24-well plates or on CMC-MCs without initial treatment. These porous CMC-MCs could be utilized for cultivating cells and for application in cartilage tissue engineering as injectable scaffolds for cell delivery.     

A hybrid scaffold of poly(lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide) sponge filled with fibrin gel for cartilage tissue engineering

The poly(lactide-co-glycolide)(PLGA) sponge fabricated by a gelatin porogen leaching method was filled with fibrin gel to obtain a hybrid scaffold for chondrocytes culture in vitro.The fibrin gel evenly distributed in the hybrid scaffold with visible fibrinogen fibers after drying.In vitro culture it was found that in the hybrid scaffold the chondrocytes distributed more evenly and kept a round morphology as that in the normal cartilage.Although the chondrocytes seeded in the control PLGA sponges showed similar proliferation behavior with that in the hybrid scaffolds,they were remarkably elongated,forming a fibroblast-like morphology.Moreover,a larger amount of glycosaminoglycans was secreted in the hybrid scaffolds than that in the PLGA sponges after in vitro culture of chondrocytes for 4 weeks.The results suggest that the fibrin/PLGA hybrid scaffold may be favorably applied for cartilage tissue engineering.     

Improving mechanical and biological properties of macroporous HA scaffolds through composite coatings

Interconnected porous hydroxyapatite (HA) scaffolds are widely used for bone repair and replacement, owing to their ability to support the adhesion, transfer, proliferation and differentiation of cells. In the present study, the polymer impregnation approach was adopted to produce porous HA scaffolds with three-dimensional (3D) porous structures. These scaffolds have an advantage of highly interconnected porosity (≈85%) but a drawback of poor mechanical strength. Therefore, the as-prepared HA scaffolds were lined with composite polymer coatings in order to improve the mechanical properties and retain its good bioactivity and biocompatibility at the same time. The composite coatings were based on poly(d,l-lactide) (PDLLA) polymer solutions, and contained single component or combination of HA, calcium sulfate (CS) and chondroitin sulfate (ChS) powders. The effects of composite coatings on scaffold porosity, microstructure, mechanical property, in vitro mineralizing behavior, and cell attachment of the resultant scaffolds were investigated. The results showed that the scaffolds with composite coatings resulted in significant improvement in both mechanical and biological properties while retaining the 3D interconnected porous structure. The in vitro mineralizing behaviors were mainly related to the compositions of CS and ChS powders in the composite coatings. Excellent cell attachments were observed on the pure HA scaffold as well as the three types of composite scaffolds. These composite scaffolds with improved mechanical properties and bioactivities are promising bone substitutes in tissue engineering fields.     

Screening of Hydrogels for Human Pluripotent Stem Cell–Derived Neural Cells: Hyaluronan‐Polyvinyl Alcohol‐Collagen‐Based Interpenetrating Polymer Network Provides an Improved Hydrogel Scaffold

There is a clear need for novel in vitro models, especially for neuronal applications. Development of in vitro models is a multiparameter task consisting of cell‐, biomaterial‐, and environment‐related parameters. Here, three different human origin neuronal cell sources are studied and cultured in various hydrogel 3D scaffolds. For the efficient evaluation of complex results, an indexing method for data is developed and used in principal component analysis (PCA). It is found that no single hydrogel is superior to other hydrogels, and collagen I (Col1) and hyaluronan–poly(vinyl alcohol) (HA1‐PVA) gels are combined into an interpenetrating network (IPN) hydrogel. The IPN gel combines cell supportiveness of the collagen gel and stability of the HA1‐PVA gel. Moreover, cell adhesion is studied in particular and it is found that adhesion of neurons differs from that observed for fibroblasts. In conclusion, the HA1‐PVA‐col1 hydrogel is a suitable scaffold for neuronal cells and supports adhesion formation in 3D.     

Fabrication and Characterization of an Electro-Compacted Collagen/Elastin/Hyaluronic Acid Sheet as a Potential Skin Scaffold

The development of biomimetic structures with integrated extracellular matrix (ECM) components represents a promising approach to biomaterial fabrication. Here, an artificial ECM, comprising the structural protein collagen I and elastin (ELN), as well as the glycosaminoglycan hyaluronan (HA), is reported. Specifically, collagen and ELN are electrochemically aligned to mimic the compositional characteristics of the dermal matrix. HA is incorporated into the electro-compacted collagen-ELN matrices via adsorption and chemical immobilization, to give a final composition of collagen/ELN/HA of 7:2:1. This produces a final collagen/ELN/hyaluronic acid scaffold (CEH) that recapitulates the compositional feature of the native skin ECM. This study analyzes the effect of CEH composition on the cultivation of human dermal fibroblast cells (HDFs) and immortalized human keratinocytes (HaCaTs). It is shown that the CEH scaffold supports dermal regeneration by promoting HDFs proliferation, ECM deposition, and differentiation into myofibroblasts. The CEH scaffolds are also shown to support epidermis growth by supporting HaCaTs proliferation, differentiation, and stratification. A double-layered epidermal-dermal structure is constructed on the CEH scaffold, further demonstrating its ability in supporting skin cell function and skin regeneration.     

与胶原特异性结合的BMP2模拟肽/PLGA 3D打印复合支架的制备及成骨诱导活性

将胶原绑定结构域(CBD)多肽序列与骨形态发生蛋白2模拟肽(BMP2-MP)序列连接制备具有胶原绑定能力的CBD-BMP2-MP, 再将CBD-BMP2-MP与聚丙交酯-乙交酯/胶原(PLGA/COL)3D打印支架相结合, 以支架表面的胶原成分为媒介, 将CBD-BMP2-MP更有效地固定于骨修复材料上, 达到对其进行改性的目的. 利用扫描电子显微镜(SEM)、 电子万能试验机和接触角测量仪对复合支架表面形貌、 力学强度和亲水性等材料学性能进行评价. 用荧光成像法评测 CBD-BMP2-MP及BMP2-MP与支架材料的结合能力. 在各组支架材料表面接种MC3T3-E1细胞进行体外培养, 采用CCK-8、 鬼笔环肽荧光染色、 茜素红染色及qPCR综合评价细胞在材料表面的黏附、 增殖和成骨分化等细胞行为, 研究CBD-BMP2-MP修饰的3D多孔PLGA/COL复合支架的生物学性能. 研究结果表明, 利用3D打印技术制备的多孔支架具有形貌可控的孔隙结构, 为细胞生长创造更有利的细胞微环境, 支架表面胶原成分的加入提高了支架材料的亲水性, 同时对支架材料本身的力学性能无任何影响, 提高了复合支架本身的生物相容性. 与普通BMP2-MP相比, CBD-BMP2-MP具有更好的胶原绑定能力, 与复合支架的结合更稳定, 提高了PLGA/COL复合支架对BMP2-MP的负载能力. 支架表面负载CBD-BMP2-MP后具有极强的促细胞成骨分化能力. MC3T3-E1细胞表现出更高的钙沉积能力, 并且成骨分化相关基因Runx2, ALP, COL-I及OPN等水平也有了明显提升. 表明CBD-BMP2-MP多孔复合支架具有良好的生物相容性和成骨诱导活性, 在骨组织修复领域具有良好的应用前景.     

Crosslinked Silk Fibroin/Gelatin/Hyaluronan Blends as Scaffolds for Cell-Based Tissue Engineering

3D porous scaffolds fabricated from binary and ternary blends of silk fibroin (SF), gelatin (G), and hyaluronan (HA) and crosslinked by the carbodiimide coupling reaction were developed. Water-stable scaffolds can be obtained after crosslinking, and the SFG and SFGHA samples were stable in cell culture medium up to 10 days. The presence of HA in the scaffolds with appropriate crosslinking conditions greatly enhanced the swellability. The microarchitecture of the freeze-dried scaffolds showed high porosity and interconnectivity. In particular, the pore size was significantly larger with an addition of HA. Biological activities of NIH/3T3 fibroblasts seeded on SFG and SFGHA scaffolds revealed that both scaffolds were able to support cell adhesion and proliferation of a 7-day culture. Furthermore, cell penetration into the scaffolds can be observed due to the interconnected porous structure of the scaffolds and the presence of bioactive materials which could attract the cells and support cell functions. The higher cell number was noticed in the SFGHA samples, possibly due to the HA component and the larger pore size which could improve the microenvironment for fibroblast adhesion, proliferation, and motility. The developed scaffolds from ternary blends showed potential in their application as 3D cell culture substrates in fibroblast-based tissue engineering.     

Functional PLGA Scaffolds for Chondrogenesis of Bone‐Marrow‐Derived Mesenchymal Stem Cells

Two chondrogenic factors, Dex and TGF‐β1, were incorporated into PLGA scaffolds and their chondrogenic potential was evaluated. The Dex‐loaded PLGA scaffold was grafted with AA and heparin, the heparin‐immobilized one was then reacted with TGF‐β1, yielding a PLGA/Dex‐TGF (PLGA/D/T) scaffold. The scaffolds were seeded with rabbit MSCs and cultured for 4 weeks. The results show that the scaffolds including chondrogenic factors strongly upregulated the expression of cartilage‐specific genes and clearly displayed type‐II collagen immunofluorescence. The functionalized PLGA scaffolds could provide an appropriate niche for chondrogenic differentiation of MSC without a constant medium supply of Dex and TGF‐β1.

     

Preparation of 3D fibroin/chitosan blend porous scaffold for tissue engineering via a simplified method

In this work, we developed a simple and flexible method to manufacture a 3D porous scaffold based on the blend of regenerated silk fibroin (RSF) and chitosan (CS). No crosslinker or other toxic reagents were used in this method. The pores of resulted 3D scaffolds were connected with each other, and their sizes could be easily controlled by the concentration of the mixed solution. Compared with pure RSF scaffolds, the water absorptivities of these RSF/CS blend scaffolds with significantly enhanced mechanical properties were greatly increased. The results of MTT and RT-PCR tests indicated that the chondrocytes grew very well in these blend RSF/CS porous scaffolds. This suggested that the RSF/CS blend scaffold prepared by this new method could be a promising candidate for applications in tissue engineering.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofubased scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofubased scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofu-based scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofu-based scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Cell adhesive and growth behavior on electrospun nanofibrous scaffolds by designed multifunctional composites

Nanostructured biocomposite scaffolds of poly(l-lactide) (PLLA) blended with collagen (coll) or hydroxyapatite (HA), or both for tissue engineering application, were fabricated by electrospinning. The electrospun scaffolds were characterized for the morphology, chemical and tensile properties by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water contact angle (WCA), Fourier transform infrared (FTIR) measurement, and tensile testing. Electrospun biocomposite scaffolds of PLLA and collagen or (and) HA in the diameter range of 200-700 nm mimic the nanoscale structure of the extracellular matrix (ECM) with a well-interconnection pore network structure. The presence of collagen in the scaffolds increased their hydrophility, and enhanced cell attachment and proliferation, while HA improved the tensile properties of the scaffolds. The biocompatibility of the electrospun scaffolds and the viability of contacting cells were evaluated by 4',6-diamidino-2-phenylindole dihydrochloride (DAPI) nuclear staining and by fluorescein diacetate (FDA) and propidium iodide (PI) double staining methods. The results support the conclusion that 293T cells grew well on composite scaffolds. Compared with pure PLLA scaffolds a greater density of viable cells was seen on the composites, especially the PLLA/HA/collagen scaffolds.     

Fabrication of poly(lactide‐co‐glycolide) scaffold embedded spatially with hydroxyapatite particles on pore walls for bone tissue engineering

Poly(lactide‐co‐glycolide) (PLGA) scaffolds embedded spatially with hydroxyapatite (HA) particles on the pore walls (PLGA/HA‐S) were fabricated by using HA‐coated paraffin spheres as porogens, which were prepared by Pickering emulsion. For comparisons, PLGA scaffolds loaded with same amount of HA particles (2%) in the matrix (PLGA/HA‐M) and pure PLGA scaffolds were prepared by using pure paraffin spheres as porogens. Although the three types of scaffolds had same pore size (450–600 µm) and similar porosity (90%–93%), the PLGA/HA‐S showed the highest compression modulus. The embedment of the HA particles on the pore walls endow the PLGA/HA‐S scaffold with a stronger ability of protein adsorption and mineralization as well as a larger mechanical strength against compression. In vitro culture of rat bone marrow stem cells revealed that cell morphology and proliferation ability were similar on all the scaffolds. However, the alkaline phosphatase activity was significantly improved for the cells cultured on the PLGA/HA‐S scaffolds. Therefore, the method for fabricating scaffolds with spatially embedded nanoparticles provides a new way to obtain the bioactive scaffolds for tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

Bioactive Phenylboronic Acid-Functionalized Hyaluronic Acid Hydrogels Induce Chondro-Aggregates and Promote Chondrocyte Phenotype

Hydrogels are extensively investigated as biomimetic extracellular matrix (ECM) scaffolds in tissue engineering. The physiological properties of ECM affect cellular behaviors, which is an inspiration for cell-based therapies. Photocurable hyaluronic acid (HA) hydrogel (AHAMA-PBA) modified with 3-aminophenylboronic acid, sodium periodate, and methacrylic anhydride simultaneously is constructed in this study. Chondrocytes are then cultured on the surface of the hydrogels to evaluate the effect of the physicochemical properties of the hydrogels on modulating cellular behaviors. Cell viability assays demonstrate that the hydrogel is non-toxic to chondrocytes. The existence of phenylboronic acid (PBA) moieties enhances the interaction of chondrocytes and hydrogel, promoting cell adhesion and aggregation through filopodia. RT-PCR indicates that the gene expression levels of type II collagen, Aggrecan, and Sox9 are significantly up-regulated in chondrocytes cultured on hydrogels. Moreover, the mechanical properties of the hydrogels have a significant effect on the cell phenotype, with soft gels (≈2 kPa) promoting chondrocytes to exhibit a hyaline phenotype. Overall, PBA-functionalized HA hydrogel with low stiffness exhibits the best effect on promoting the chondrocyte phenotype, which is a promising biomaterial for cartilage regeneration.     

Effect of surface-modified collagen on the adhesion, biocompatibility and differentiation of bone marrow stromal cells in poly(lactide-co-glycolide)/chitosan scaffolds

The material-driven differentiation of bone marrow stromal cells (BMSCs) is a critical issue in regeneration medicine. In this study, we showed the differentiation of BMSCs in 3-D scaffolds consisting of collagen, poly(lactide-co-glycolide) (PLGA) and chitosan. The results revealed that the collagen-grafted PLGA/chitosan scaffolds yielded little cytotoxicity to BMSCs. The scaffold containing type I collagen of 640μg/mL was about 1.2 times the cell adhesion efficiency of the corresponding unmodified scaffold. In addition, the modification of type I collagen with the density of 640μg/mL increased about 1.3 times the cell viability and 1.2 times the biodegradation, respectively. The differentiation of BMSCs in PLGA/chitosan scaffolds produced osteoblasts with mineral deposition on the substrate. Moreover, the surface collagen promoted the formation of mineralized tissue and reduced the amount of phenotypic BMSCs in the constructs. However, the induction with neuron growth factor (NGF) inhibited osteogenesis and guided the differentiation of BMSCs towards neurons in the constructs. Therefore, the combination of collagen-functionalized PLGA/chitosan scaffolds, NGF and BMSCs can be promising in neural tissue engineering.     

Porous nano-minerals substituted apatite/chitin/pectin nanocomposites scaffolds for bone tissue engineering

In the current study, a porous 3D scaffold using Gallium-Apatite/chitin/pectin (Ga-HA/C/P) nanocomposites scaffolds (NCS) were fabricated by freeze-drying process with applications in orthopedics (bone tissue engineering). Various NCSs (0%, 30%, 50 and 70%) were prepared and characterized for its chemical structure, crystalline phase, surface texture by using various techniques such as FT-IR, XRD and SEM-EDX, respectively. The analyses of physicochemical properties proved that the formulated scaffolds were highly porous, and mechanically stable with superior density. The nanocomposite scaffolds also presented with increased swelling ability, lower biodegradation rate and higher mechanical strength. Further, biocompatibility and cytotoxicity of Ga-HA/C/P nanocomposite scaffolds were studied using NIH3T3 cells and MG-63 cells revealed no toxicity and cells attached and proliferated on scaffolds. Further implantation of prepared NCS showed mature bone formation through formation of new bone cells and osteoblast differentiation. Also, Ga-HA/C/P nanocomposites scaffolds proved to be more effective than chitin-pectin composite scaffolds. Taking results together it can be inferred that the prepared nanocomposite scaffolds possesses the prerequisites and showed great potential for treating orthopedic applications.     

纳米硅酸镁锂-壳聚糖-海藻酸钠复合支架材料的制备与性能

利用真空冷冻干燥技术, 将不同质量的纳米硅酸镁锂(nLMS)与壳聚糖(CA)和海藻酸钠(SA)混合, 制备了纳米硅酸镁锂-壳聚糖-海藻酸钠(nLMS-CS-SA)复合支架材料. 研究了不同质量分数(1%, 2%, 3%, 4%)的nLMS对nLMS-CS-SA复合支架材料的外形、 微观形貌、 溶胀率、 孔隙率、 体外降解性能和生物相容性的影响, 以确定nLMS-CS-SA复合支架材料中最佳nLMS含量. 研究结果显示, nLMS-CS-SA复合支架材料是具备形态可塑性的多孔状固体, 各组材料纵断面呈片层状, 其结构疏松且内部孔隙具有高度连通性; 随着nLMS含量的增加, nLMS-CS-SA复合支架材料的孔隙率呈现先降后升的趋势; 当nLMS的质量分数为3%时, 其溶胀比最小, 体外降解速率最慢; nLMS的添加降低了nLMS-CS-SA复合支架材料的毒性. 因此, nLMS在nLMS-CS-SA复合支架材料中的最佳含量为3%.