Redox chemistry of tellurium bis(tert-butylamido)cyclodiphosph(V)azane disulfide and diselenide systems: a spectroscopic and structural study

The redox chemistry of tellurium-chalcogenide systems is examined via reactions of tellurium(IV) tetrachloride with Li[(t)()BuN(E)P(mu-N(t)Bu)(2)P(E)N(H)(t)Bu] (3a, E = S; 3b, E = Se). Reaction of TeCl(4) with 2 equiv of 3a in THF generates the tellurium(IV) species TeCl(3)[HcddS(2)][H(2)cddS(2)] 4a [cddS(2) = (t)BuN(S)P(mu-N(t)Bu)(2)P(S)N(t)Bu] at short reaction times, while reduction to the tellurium(II) complex TeCl(2)[H(2)cddS(2)](2) 5a is observed at longer reaction times. The analogous reaction of TeCl(4) and 3b yields only the tellurium(II) complex TeCl(2)[H(2)cddSe(2)](2) 5b. The use of 4 equiv of 3a or 3b produces Te[HcddE(2)](2) (6a (E = S) or 6b (E = Se)). NMR and EPR studies of the 5:1 reaction of 3a and TeCl(4) in THF or C(6)D(6) indicate that the formation of the Te(II) complex 6a via decomposition of a Te(IV) precursor occurs via a radical process to generate H(2)cddS(2). Abstraction of hydrogen from THF solvent is proposed to account for the formation of 2a. These results are discussed in the context of known tellurium-sulfur and tellurium-nitrogen redox systems. The X-ray crystal structures of 4a.[C(7)H(8)](0.5), 5a, 5b, 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) have been determined. The cyclodiphosph(V)azane dichalcogenide ligand chelates the tellurium center in an E,N (E = S, Se) manner in 4a.[C(7)H(8)](0.5), 6a.[C(6)H(14)](0.5), and 6b.[C(6)H(14)](0.5) with long Te-N bond distances in each case. Further, a neutral H(2)cddS(2) ligand weakly coordinates the tellurium center in 4a small middle dot[C(7)H(8)](0.5) via a single chalcogen atom. A similar monodentate interaction of two neutral ligands with a TeCl(2) unit is observed in the case of 5a and 5b, giving a trans square planar arrangement at tellurium.     

The mechanism of Tröger's base formation probed by electrospray ionization mass spectrometry

Using direct infusion electrospray ionization mass and tandem mass spectrometric experiments [ESI-MS(/MS)], we have performed on-line monitoring of some reactions used to form Tr?ger's bases. Key intermediates, either as cationic species or as protonated forms of neutral species, have been intercepted and characterized. The role of urotropine as the methylene source in these reactions has also been accessed. Reaction pathways shown by ESI-MS(/MS) have been probed by gas-phase ion/molecule reactions, and an expanded mechanism for Tr?ger's base formation based on the mass spectrometric data has been elaborated.     

The mechanism of Sandmeyer's cyclization reaction by electrospray ionization mass spectrometry

Using electrospray ionization (tandem) mass spectrometry (ESI-MS(/MS)) spectrometric experiments, the Sandmeyer reaction was monitored on-line, and key intermediates were intercepted and characterized for the first time. The mechanistic information provided by on-line ESI-MS(/MS) is in accordance with Sandmeyer's proposal, and was made possible by coupling a microreactor on-line to the ESI ion source, which allowed reactions to be screened from 0.7-2.0 s, identifying and characterizing all intermediates that were formed and consumed during the reaction.     

Investigation of reaction mechanisms by electrospray ionization mass spectrometry: characterization of intermediates in the degradation of phenol by a novel iron/magnetite/hydrogen peroxide heterogeneous oxidation system

Electrospray ionization (ESI) mass spectrometry (MS) and tandem mass spectrometry (MS/MS) were used to monitor the oxidation of phenol by a novel heterogeneous Fenton system based on a Fe(0)/Fe(3)O(4) composite and H(2)O(2). On-line ESI-MS(/MS) shows that this heterogeneous system promotes prompt oxidation of phenol to hydroquinone, which is subsequently oxidized to quinone, other cyclic poly-hydroxylated intermediates and an acyclic carboxylic acid. A peroxide-type intermediate, probably formed via an electrophilic attack of HOO(.) on the phenol ring, was also intercepted and characterized. ESI-MS(/MS) monitoring of the oxidation of two other model aromatic compounds, benzene and chlorobenzene, indicates the participation of analogous intermediates. These results suggest that oxidation by the heterogeneous system is promoted by highly reactive HO(.) and HOO(.) radicals generated from H(2)O(2) on the surface of the Fe(0)/Fe(3)O(4) composite via a classical Fenton-like mechanism.     

Direct synthesis of Te/Bi2Te3 nanocomposite powders by a polyol process

Research on Chemical Intermediates - Tellurium nanotube-based bismuth telluride (Te/Bi2Te3) nanocomposite powders have been synthesized by the polyol process using Bi (NO3)3, TeCl4 as the metal...     

Study of the Transient Reactive Pd(IV) Intermediate in the Pd(OAc)2‐Catalyzed Oxidative Coupling Reaction System by Electrospray Ionization Tandem Mass Spectrometry

Pd‐catalyzed oxidative coupling reaction was of great importance in the aromatic C? H activation and the formation of new C? O and C? C bonds. Sanford has pioneered practical, directed C? H activation reactions employing Pd(OAc)₂ as catalyst since 2004. However, until now, the speculated reactive Pd(IV) transient intermediates in these reactions have not been isolated or directly detected from reaction solution. Electrospray ionization tandem mass spectrometry (ESI‐MS/MS) was used to intercept and characterize the reactive Pd(IV) transient intermediates in the solutions of Pd(OAc)₂‐catalyzed oxidative coupling reactions. In this study, the Pd(IV) transient intermediates were detected from the solution of Pd(OAc)₂‐catalyzed oxidative coupling reactions by ESI‐MS and the MS/MS of the intercepted Pd(IV) transient intermediate in reaction system was the same with the synthesized authentic Pd(IV) complex. Our ESI‐MS(/MS) studies confirmed the presence of Pd(IV) reaction transient intermediates. Most interestingly, the MS/MS of Pd(IV) transient intermediates showed the reductive elimination reactivity to Pd(II) complexes with new C? O bond formation into product in gas phase, which was consistent with the proposed reactivity of the Pd(IV) transient intermediates in solution.     

Sorption and separation of some elements of nuclear importance using Chelex-100

Chelex-100, in the anionic form has been studied for its ability to perform selective separation and concentration of some metal ions of nuclear importance from mineral acid solutions. The sorption behavior of Zr(IV)–Nb(V), Mo(VI), Tc(VII), Te(IV) and U(VI) from solutions of hydrochloric and sulphuric acids on Chelex-100 has been studied under static and dynamic conditions. Mo(VI) and Tc(VII) have been concentrated on the resin from hydrochloric or sulphuric acid solutions at low acidities probably, as the anions MoO ₄ ^2– and TcO ₄ ^– , respectively. Te(IV) has been isolated from hydrochloric acid solutions of normalities 6 in the form of the anionic chloro complex TeCl ₆ ^2– . Optimum conditions for elution and separation of Mo(VI), Tc(VII), Te(IV) and U(VI) were recommended.     

Funktionalisierte Alkinkomplexe von Wolfram(VI). Synthese und Kristallstrukturen von [WCl4(Et?Se?CC?Se?Et)(THF)] und [WCl4(Et?Te?CC?Te?Et)(THF)]

Functionalized Alkyne Complexes of Tungsten(VI). Syntheses and Crystal Structures of [WCl₄(Et? Se? C?C? Se? Et)(THF)] and [WCl₄(Et? Te? C?C? Te? Et)(THF)] The title compounds have been prepared by reactions of [WCl₄(SEt₂)₂] with the alkynes Et? X? C?C? X? Et (X = Se, Te) in CCl₄ solution and subsequent addition of tetrahydrofurane. Both complexes were characterized by crystal structure determinations. [WCl₄(Et? Se? C?C? Se? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 2942 unique reflections, R = 0.038. Lattice dimensions at 20°C: a = 934.2, b = 1639.5, c = 1189.5 pm, β = 96.497°. [WCl₄(Et? Te? C?C? Te? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 4097 unique reflections, R = 0.067, Lattice dimensions at ?70°C: a = 899.2, b = 1691.9, c = 1213.3 pm, β = 96.82°. The complexes have monomeric molecular structures with the oxygen atom of the THF molecules in trans-position to the side-on bound alkyne ligands.     

Revisiting the addition reaction of TeCl4 to alkynes: The crystal structure and docking studies of 1-chloro-2-trichlorotelluro-3-phenyl-propen-2-ol

Tellurium tetrachloride adds to alkynes via two pathways: a concerted syn addition, that yields Z-tri- and tetra-substituted alkenes or by an anti addition that yields E-alkenes. The mechanistic aspects of these divergent pathways have been reevaluated at the light of crystallographic data. The molecules, of the title compound, in the crystal, are associated in a helical fashion with a Te…Te pitch of 6.3492(6) Å. As it exhibits inhibitory activity for cathepsin B and in order to gain more insight of the inhibition mechanism, a docking study was undertaken providing insight on why organic telluranes are more efficient inhibitors than inorganic ones as AS-101.     

Mechanistic study of the addition reaction of TeCl4 to alkynes: Participation of TeCl3 centered-radical

The mechanism of the addition reaction of TeCl₄ to alkynes was indirectly established by the detection of TeCl₃ centered radicals using EPR spin trapping, ESI-MS and ESI-MS/MS characterization.     

Rapid reversed-phase chromatographic separation and determination of selenum and tellurium

Summary The chromatographic behaviour of selenium and tellurium has been investigated with two different reversed-phase chromatographic methods, using P-350 (methyl-bi-isooctyl phosphate) and TBP (tributyl phosphate) as the stationary phases. HCl, HBr, NaCl and NaBr were employed as mobile phase components in both methods. The results suggested that the separation mechanism corresponds to the formation of TeCl (or TeBr) and P-350H (or TBPH) ion associate. A coulometric flow-through detector was applied to determine Se(IV) and Te(IV). Complete separation and quantitative determination of Se and Te could be achieved in 10 minutes.     

An Improved Synthesis of Dialkylcyclopropenones

Dialkylcyclopropenones are formed in high yields when alkynes are treated with chloroform-butyllithium in THF at - 78 °C followed by acidic hydrolysis of the dichlorocyclopropene intermediates at low temperatures.     

Structural study of amorphous tellurium(II) halides TeCl2-xIx (x = 0.5, 0.1): X-ray diffraction and reverse Monte Carlo simulations

The addition of small amounts of iodine to thermodynamically instable TeCl2 yields amorphous, glassy tellurium(II) halides TeCl2-xIx (0.1 < x < 0.5), which were prepared by rapid quenching of melts with the respective compositions. At ambient temperature, these glassy solids are sufficiently stable to be handled and investigated by analytical methods. High-energy X-ray diffraction and reverse Monte Carlo simulations of two compositions TeCl2-xIx, x = 0.1 and 0.5, show that these glasses are made up of structural fragments that are present in both tellurium tetrahalides and in low-valent tellurium subhalides. In both glasses, the Te-Te bonding shows narrow coordination distribution with a mean total coordination number for the Te atoms of 4.1 +/- 1.3 and a mean Te-Te coordination number of 0.7 +/- 0.7. Accordingly, the mean Cl-Te coordination number is 1.7 +/- 0.8 and the mean I-Te coordination number is 1.6 +/- 0.7. The medium-range order increases with increasing iodine content.     

Syntheses, vibrational spectra, and theoretical studies of the adamantanoid Sn(4)Ch(10)(4-) (Ch = Se, Te) anions: X-ray crystal structures of [18-crown-6-K](4)[Sn4Se10]*5en and [18-crown-6-K](4)[Sn4Te10]*3en*2THF

The salts [18-crown-6-K](4)[Sn(4)Se(10)].5en and [18-crown-6-K](4)[Sn(4)Te(10)].3en.2THF were isolated upon addition of THF to the ethylenediamine (en) extracts of the alloys KSn(0.90)Se(1.93) and K(4)Sn(4)Te(10) that had been extracted in the presence of 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane). The Sn(4)Te(10)(4-) anion has been structurally characterized for the first time by a single-crystal X-ray diffraction study of [18-crown-6-K](4)[Sn(4)Te(10)].3en.2THF: P2(1)/n, a = 22.420(5) A, b = 19.570(4) A, c = 24.680(5) A, beta = 96.90(3)(o), Z = 4, and R(1) = 0.0468 at -183 degrees C. In addition to Si(4)Te(10)(4-) and Ge(4)Te(10)(4-), the Sn(4)Te(10)(4-) anion represents the only other known group 14 adamantanoid telluride. The X-ray crystal structure determination of the related [18-crown-6-K](4)[Sn(4)Se(10)].5en salt has also been determined: P2(1)/n, a = 22.003(2) A, b = 18.966(2) A, c = 24.393(2) A, beta = 97.548(8)(o), Z = 4, and R(1) = 0.0843 at -123 degrees C. The anion geometries are of the adamantanoid type where the Sn(IV) atoms occupy the bridgehead positions and the chalcogen atoms occupy the bridging and terminal sites. The energy minimized geometries of Sn(4)Ch(10)(4-) have also been determined using density functional theory (DFT). Mayer bond order analyses, Mayer valencies, and empirical bond valencies indicate that the terminal Sn-Ch bonds have significant multiple bond character, with the terminal Sn-Se bond having more multiple bond character than the terminal Sn-Te bond. The vibrational frequencies of the Sn(4)Se(10)(4-) and Sn(4)Te(10)(4-) anions have been calculated using DFT methods, allowing the Raman spectrum of Sn(4)Se(10)(4-) to be fully assigned.     

An efficient three-step synthesis of cyclopenta[b]pyrans via 2-donor-substituted fischer ethenylcarbenechromium complexes

A wide range of cyclopenta[b]pyrans 4 has been synthesized in a one-pot reaction by treatment of different 2-donorsubstituted ethenylcarbenechromium complexes 2 with alkynes in THF in moderate to excellent yields (41-90 % for 14 out of 25 examples). The starting materials 2 are readily available in good to excellent yields (76-99 % for 25 out of 36 examples) by Michael addition of amines, alcohols and thiols, respectively, to the corresponding alkynylcarbenechromium complexes 1. Due to their 10 pi-electrons in a cross-conjugated bicyclic system, cyclopenta[b]pyrans have been termed pseudoazulenes, as they indeed have similar UV/Vis-spectroscopic properties.     

Liquid-liquid extraction study of tellurium(IV) with N-n-octylaniline in halide medium and its separation from real samples

N-n-Octylaniline in xylene is used for extractive separation of tellurium(IV) from hydrochloric acid media. Tellurium(IV) is extracted quantitatively with the 3% reagent in xylene from 5.5 to 7.5 M hydrochloric acid. It is stripped from organic phase with 1:1 ammonia and estimated spectrophotometrically with pyrimidine-2-thiol (4'-bromoPTPT). The effects of metal ion, acids, reagent concentration, diluents and various foreign ions have been investigated. The log-log plots of distribution ratio (D(Te(IV))) versus N-n-octylaniline concentration indicate that the nature of extracted species is [(RR'NH(2)(+))(2) TeCl(6)(2-)](org). The method affords binary separation of tellurium(IV) from gold(III), selenium(IV), bismuth(III), copper(II), lead(II), antimony(III), germanium(IV) and is applicable to the analyses of synthetic mixture containing associated metal ions and alloy samples. The method is simple, selective, rapid and accurate.     

Probing the mechanism of direct Mannich-type alpha-methylenation of ketoesters via electrospray ionization mass spectrometry

Reactions promoting direct Mannich-type alpha-methylenation of alpha, beta and gamma-ketoesters have been monitored via electrospray ionization mass and tandem mass spectrometric experiments. Key intermediates of the catalytical cycle of this synthetically useful reaction have been intercepted and characterized. The mechanistic information provided by electrospray ionization mass spectrometry/mass spectrometry (ESI-MS/MS) guided the optimization of reaction conditions, allowing alpha-methyleneketoesters to be prepared in high yields (80-95%) and in high-enough purity for immediate further manipulation.     

A Simple Convenient Method for the Synthesis of 1-Iodoalkynes

Reaction of terminal alkynes with ethylmagneslum bromide In THF followed by the addition of lodine In THF gives 1-lodoalkynes In excellent yields (90–96%).     

Studies on CH3CN-assisted decomposition of 1st Grubbs catalyst by electrospray ionization tandem mass spectrometry

The CH(3)CN-assisted decomposition reaction of the 1(st) Grubbs catalyst (1) was studied using electrospray ionization tandem mass spectrometry (ESI-MS/MS). We detected a series of Ru-intermediates and decomposition products by off-line and on-line ESI-MS(/MS) monitoring of the decomposition process. In particular, an on-line microreactor method was applied with ESI-MS/MS to profile the change and relationship of various Ru-intermediates by controlling the reaction within the first 30 s of its time scale. The main fast decomposition mechanism of Ru-catalyst 1 in the presence of CH(3)CN was similar to that proposed by Grubbs, and this was confirmed by detecting the (PhCH(2)PCy(3))(+) ion at m/z 371 as the major decomposition products with ESI-MS. We also studied the time evolution of the transient reactive Ru-intermediate ions step by step with ESI-MS/MS and detected the C-H bond activation products of toluene--dehydrogenated PCy(3), such as P(Cy)(2)(C(6)H(9)), P(Cy)(2)Ph--by analyzing the decomposition reaction solution by gas chromatography (GC)/MS. The mechanism of another minor decomposition pathway involving the phosphine activation of catalyst 1 was proposed on the basis of the ESI-MS(/MS) interception and characterization of the transient reactive Ru-species in the decomposition reaction solution. Finally the coordination effect of the CH(3)CN in assisting the decomposition and stabilizing the transient Ru-complexes is discussed.     

Reactive iron carbonyl reagents via reaction of metal alkoxides with Fe(CO)5 or Fe2(CO)9: synthesis of cyclobutenediones via double carbonylation of alkynes

Alkoxy bases such as t-BuOK react with Fe(CO)(5) to give reactive iron carbonyl intermediates that in turn react with alkynes at 70 °C in THF to give 1,2-cyclobutenediones in 70-93% yields after CuCl(2)·2H(2)O oxidation. A novel 1,2-diacyloxyferrole derivative was isolated in the reaction of diphenylacetylene with Fe(CO)(5)/t-BuOK in the presence of acetyl chloride in contrast to the formation of a 1,4-diacyloxyferrole complex formed in the reaction using Fe(CO)(5)/Me(3)NO. The Fe(2)(CO)(9)/t-BuOK reagent system also converts the alkynes to corresponding cyclobutenediones in 63-90% yields under similar reaction conditions.