Electrochemical properties of polyaniline in p-toluene sulfonic acid solution

Polyaniline was deposited potentiodynamically on a stainless steel substrate in the presence of an inorganic acids (sulfuric acid). The electrochemical characterization of the electrode was carried out by means of cyclic voltammetry and electrochemical impedance spectroscopy in the organic acids (p-toluene sulfonic acid) solution. The results show that polyaniline has a high specific capacitance of 431.8 F g⁻¹ at 1 mV s⁻¹, high coulombic efficiency of 95.6% at 20 mV s⁻¹, and exhibits a high reversibility. This indicates the promising feasibility of the polyaniline used as an electrochemical capacitor material in the electrolyte of p-toluene sulfonic acid solution especially at high charge–discharge process.     

Interaction and photodynamic activity of cationic porphyrin derivatives bearing different patterns of charge distribution with GMP and DNA

The interaction of amphiphilic cationic porphyrins, containing different patterns of meso-substitution by 4-(3-N,N,N-trimethylammoniumpropoxy)phenyl (A) and 4-(trifluoromethyl)phenyl (B) groups, with guanosine 5′-monophosphate (GMP) and calf thymus DNA have been studied by optical methods in phosphate buffer solution. The properties of these synthetic porphyrins were compared with those of representative standard of anionic 5,10,15,20-tetra(4-sulphonatophenyl)porphyrin (TPPS₄⁴⁻) and cationic 5,10,15,20-tetra(4-N,N,N-trimethylammonium phenyl)porphyrin (TMAP⁴⁺). Stable complexes with GMP were found for cationic porphyrins, except for monocationic AB₃⁺. The binding constant (K_GMP  10⁴ M⁻¹) follows the order: A₃B³⁺  ABAB²⁺ > A₄⁴⁺  TMAP⁴⁺. Also, interaction with DNA was observed for all evaluated cationic porphyrins. For these related cationic porphyrins, the binding constant (K_DNA  10⁵ M⁻¹) increases with the number of cationic charges. On the other hand, the photodynamic activity of porphyrins was analyzed in solution of GMP and DNA. Monocationic AB₃⁺ is a less effective sensitizer to oxidize GMP in comparison with the other cationic porphyrins, in agreement with the lack of detected interaction with this nucleotide. The electrophoretic analysis of DNA indicates that photocleavage takes place when the samples are exposed to photoexcited tricationic and tetracationic porphyrins. In the presence of sodium azide the DNA decomposition was diminished. Also, reduction in the DNA photocleavage was observed under anoxic condition, indicating that oxygen is essential for DNA photocleavage sensitized by these cationic porphyrins. In addition, an increase in DNA degradation was not observed in deuteriated water. Therefore, an important contribution of type I photoreaction processes could be occurring in the DNA photodamage sensitized by these cationic porphyrins. These results provide a better understanding of the characteristics needed for sensitizers to produce efficient DNA photocleavage.     

Negatively charged micelles directed synthesis of snow-ball flower like superparamagnetic Ni nanoparticles and investigation of their properties

Snow-ball flower like Ni nanoparticles have been synthesized using negatively charged micelles. Negatively charged micelles incorporate the Ni⁺² onto its head group by electrostatic attraction and again a surfactant layer is arranged on positively charged Ni and thus in a repetitive way layer-by-layer a snow-ball flower like structure is formed. After reduction of Ni⁺² to Ni atom by sodium borohydride and hydrated hydrazine the Ni clusters (3 nm) are formed and confined in micelles in snow-ball flower like pattern. The sizes of these nanoflowers are of 30 nm order. The particles are superparamagnetic in nature with blocking temperature about 117 K.     

Enhanced tungstate electrochromism via formation of transparent conductive networks

Indium tin oxide (ITO) nanopowder was added to a polymer film containing WO₃ · H₂O particles to enhance electron conductivity and complimentary Li ion kinetics in an electrochromic device. Film conductivity increased dramatically with ITO content, suggesting the formation of conductive ITO networks in the film. The improved electron conductivity leads to a substantial increase of the effective Li⁺ ion diffusion coefficient in the composite film, from 10⁻¹¹ to 10⁻⁹ cm²/s. Electrochromic contrast studies revealed that the presence of the ITO networks leads to enhanced blue/green color contrast.     

Isoconversional kinetics of degradation of polyvinylpyrrolidone used as a matrix for ammonium nitrate stabilization

Thermogravimetric analyzer (TGA) has been applied to measure the kinetics of the thermal degradation of virgin polyvinylpyrrolidone (PVP) and a phase stabilized PVP–ammonium nitrate (AN) material. The PVP–AN samples have been prepared by using 20 wt.% of AN and PVP of three different molecular weights. Virgin PVP undergoes a major mass loss in the region 380–550 °C leaving a small amount of nonvolatile residue. The application of an advanced isoconversional method to the respective degradation process demonstrates that its effective activation energy increases from 70 kJ mol⁻¹ to a plateau value at 250–300 kJ mol⁻¹, which is independent of the molecular weight. The PVP–AN materials lose spontaneously 20% of their mass on heating above the glass transition temperature of the PVP matrix (160–180 °C). After the escape of AN, the remaining PVP matrix degrades in the same temperature region as virgin PVP, however, the effective activation energy of this degradation is 150–200 kJ mol⁻¹.     

Effects of carbon dioxide in breath gas on proton transfer reaction-mass spectrometry (PTR-MS) measurements

PTR-MS is becoming a common method for the analysis of volatile organic compounds (VOCs) in human breath. Breath gas contains substantial and, particularly for bag samples, highly variable concentrations of water vapour (up to 6.3%) and carbon dioxide (up to 6.5%). The goal of this study was to investigate the effects of carbon dioxide on PTR-MS measurements; such effects can be expected in view of the already well known effects of water vapour. Carbon dioxide caused an increase of the pressure in the PTR-MS drift tube (1% increase for 5% CO₂), and this effect was used to assess the CO₂ concentration of breath gas samples along the way with the analysis of VOCs. Carbon dioxide enhanced the concentration ratio of protonated water clusters (H₃O⁺H₂O) to protonated water (H₃O⁺) in the drift tube. Using the observed increase, being 60% for 5% CO₂, it is estimated that the mobility of water cluster ions in pure CO₂ is almost 65% lower than in air. Carbon dioxide had a significant effect on the mass spectra of the main breath gas components methanol, ethanol, 1-propanol, 2-propanol, acetone, and isoprene. Carbon dioxide caused a small increase (<10% for 5% CO₂) of the normalised main signals for the non-fragmenting molecules methanol and acetone. The increase can be much higher for the fragmenting VOCs (ethanol, propanol, and isoprene) and was, for 5% CO₂, up to 60% for ethanol. This effect of CO₂ on fragment patterns is mainly a consequence of the increased abundance of protonated water clusters, which undergo softer reactions with VOCs than the hydronium ions. Breath gas samples stored in Teflon bags lost 80% of CO₂ during 3 days, the decrease of VOC signals, however, is mainly attributed to decreasing VOC concentrations and to the loss of humidity from the bags.     

A rapid approach for assessment of arsenic exposure by elemental analysis of single strand of hair using laser ablation-inductively coupled plasma-mass spectrometry

Application of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) as a method for identification of arsenic in a single hair strand was investigated. Using a single point ablation method detectability of ⁷⁵As and other two elements (²⁰⁸Pb and ⁶⁴Zn) were evaluated. Arsenic (⁷⁵As) signal is improved with enhanced laser ablation conditions. For the arsenic determination in hair single spots or single linear scans with enhanced laser ablation conditions described in the paper are satisfactory although  800 μm linear scans may be preferable. Arsenic levels in a single strand of hair from individuals who were chronically exposed to arsenic contaminated drinking water from a village in the Atacama Desert in northern Chile were determined by LA-ICP-MS. These results were satisfactorily correlated with total As concentration previously measured by hydride generation (HG)-ICP-MS. The sample throughput is high and it takes  3 min per each hair sample including mounting, focusing and analysis. LA-ICP-MS method can be used for the rapid identification and screening of toxic and nutritionally important elements in hair.     

Effect of small amount of poly(ethylene naphthalate) on isothermal crystallization and spherulitic morphology of poly(trimethylene terephthalate)

The effect of a small amount of poly(ethylene naphthalate) (PEN) in its blends with poly(trimethylene terephthalate) (PTT) on isothermal melt-crystallization kinetics and spherulitic morphology of the blends was thoroughly investigated. The maximum PEN content in the blends was 9 wt%. Due to the single composition-dependent glass transition temperature (T_g) that was observed for each blend, these blends appeared to be miscible in the amorphous state. After isothermal crystallization from the melt state, the neat PTT and its blends with PEN exhibited either double or triple melting endotherms. The triple endothermic peaks were observed in both the neat PTT and the blends when being crystallized at crystallization temperatures (T_c) of less than or equal to 195 °C. The equilibrium melting temperature () for the neat PTT was determined based on the linear Hoffman–Weeks extrapolative method to be 248 °C. Such values for the blends were found to decrease with the addition and increasing amount of PEN. Both the neat PTT and the blends were isothermally crystallized over the T_c range of 190–205 °C. At a given T_c, the 97PTT/3PEN blend exhibited a half-time of crystallization (t_0.5) value that was lower, while it exhibited reciprocal half-time (), Avrami rate constant (K_A), and spherulitic growth rate (G) values that were greater, than those of the neat PTT. With further increase in the PEN content, the t_0.5 value increased, while the , K_A, and G values decreased. Analysis of the G values based on the Lauritzen–Hoffman's (LH) secondary nucleation theory showed that the neat PTT and the 91PTT/9PEN blend exhibited a regime II→III transition at 194 °C (467.2 K), while no regime transition was observed for the other two blends. The lateral and the fold surface free energies (σ and σ_e) and the work of chain folding (q) for the neat PTT and the blends were 19.4, 30.2–46.3 erg cm⁻², and 2.4–3.6 kcal mol⁻¹, respectively. Lastly, the effect of both the T_c and the PEN content on morphology and texture of the PTT spherulites was also investigated and the results showed that the texture of the spherulites became coarser with increasing T_c and PEN content.     

Deep oxidation in propane oxidative dehydrogenation to propene over V2O5/γ-Al2O3 studied by in-situ DRIFTS

In-situ DRIFTS was used to study the deep oxidation of propane, a side reaction during propane oxidative dehydrogenation to propene. Strong adsorption of propene was supposed to be the main reason for the deep oxidation. It was found that gaseous oxygen in the feed and the reaction temperature had great influence on the reaction. To obtain a relative high selectivity to propene, the reaction temperature should be maintained at 150250 °C with a proper content of gaseous oxygen in the feed for a certain catalyst and some modifiers which could weaken the adsorption of propene on the catalyst surface would be favorable.     

Investigations of the local structures and spin Hamiltonian parameters for the trigonal Rh and Ir centers in rhombohedral BaTiO3

The local structures and spin Hamiltonian parameters (g factors and the hyperfine structure constants) of the Rh⁴⁺(4d⁵) and Ir⁴⁺(5d⁵) centers in rhombohedral BaTiO₃ are theoretically investigated from the formulas of these parameters for a nd⁵ (n = 4 and 5) ion with low spin (S = 1/2) in a trigonally distorted octahedron. From the calculations, the impurity ions are found not to occupy exactly the host Ti⁴⁺ site in BaTiO₃ but to suffer a slight inward shift (0.13 Å) towards the center of the oxygen octahedron along the C₃ axis, yielding much smaller trigonal distortion as compared with that of the host Ti⁴⁺ site. The theoretical spin Hamiltonian parameters based on the above impurity axial shifts are in good agreement with the observed values.     

Vibrational satellite of Na(3d ← 3s) dipole-forbidden transition in Na/CF4 mixture

Excitation spectra of Na fluorescence in mixtures with CF₄ display a new band shifted by the energy of one-vibrational quantum of the IR active ν₃-mode of CF₄ (1281 cm⁻¹) from Na 3d states. This band is attributed to a Na(3s)CF₄(ν₃ = 0) → Na(3d)CF₄(ν₃ = 1) transition and its intensity is explained by coupling with Na(4p)CF₄(v₃ = 0) resonance state which lies  180 cm⁻¹ below in energy. An analogous satellite of the Na 6p state combined with the same vibration and lying close to the Na 7p state is reported and discussed.     

Transitions between P21, , and P6322 modifications of SrAl2O4 by in situ high-temperature X-ray and neutron diffraction

The results of in situ high-temperature X-ray and neutron powder diffraction experiments reconcile inconsistencies in previous reports on the symmetry of high-temperature phases of SrAl₂O₄. The material undergoes two reversible phase transitions and at 680 and 860 °C, respectively, and the latter one is experimentally observed and characterized for the first time. The higher symmetry above the transition is gained by disordering off-center split site of oxygen atoms around trigonal axis rather than by unbending Al–O–Al angle to the ideal value 180°. The analysis of the literature suggests that it is a common feature of the P6₃22 phases of stuffed tridymites.     

Characterization of Fumed Alumina/Silica/Titania in the Gas Phase and in Aqueous Suspension

Fumed oxide alumina/silica/titania was studied in comparison with fumed alumina, silica, titania, alumina/silica, and titania/silica by means of XRD, ¹H NMR, IR, optical, dielectric relaxation, and photon correlation spectroscopies, electrophoresis, and quantum chemical methods. The explored Al₂O₃/SiO₂/TiO₂ consists of amorphous alumina (22 wt%), amorphous silica (28 wt%), and crystalline titania (50 wt%, with a blend of anatase (88%) and rutile (12%)) and has a wide assortment of Brønsted and Lewis acid sites, which provide a greater acidity than that of individual fumed alumina, silica, or titania and an acidity close to that of fumed alumina/silica or titania/silica. The changes in the Gibbs free energy (ΔG) of interfacial water in an aqueous suspension of Al₂O₃/SiO₂/TiO₂ are close to the ΔG values of the dispersions of pure rutile but markedly lower than those of alumina, anatase, or rutile covered by alumina and silica. The zeta potential of Al₂O₃/SiO₂/TiO₂ (pH of the isoelectric point (IEP) equals ≈3.3) is akin to that of fumed titania (pH(IEP_TiO2) ≈ 6) at pH > 6, but it significantly differs from the ζ of fumed alumina (pH(IEP_Al2O3) ≈ 9.8) at any pH value as well as those of fumed silica, titania/silica, and alumina/silica at pH < 6. The particle size distribution in the diluted aqueous suspensions of Al₂O₃/SiO₂/TiO₂ studied by means of photon correlation spectroscopy depends relatively slightly on pH in contrast to the titania/silica or alumina/silica dispersions. Theoretical calculations of oxide cluster interaction with water show a high probability of hydrolysis of Al–O–Ti and Si–O–Ti bonds strained at the interface of alumina/titania or silica/titania due to structural differences in the lattices of the corresponding individual oxides. Ab initio calculated chemical shift δ_H values of H atoms in different hydroxyl groups at the oxide clusters and in bound water molecules are in agreement with the ¹H NMR data and show a significant impact of charged particles (H₃O⁺ or OH⁻) on the average δ_H values of water droplets with (H₂O)_n at n between 2 and 48.     

Effect of high rates of mass transport on oxygen reduction at copper electrodes: Implications for aluminium corrosion

The reduction of oxygen at copper microelectrodes (25 μm diameter) in aqueous solution (pH 7) has been studied under conditions of high mass transport, similar to those experienced by μm sized copper-containing inclusions in aluminium alloys during corrosion. Contrary to previous studies at copper electrodes operating at lower mass transport rates, oxygen reduction limiting currents show an apparent number of electrons which decrease towards 2 as the mass transport rate increases (mass transfer coefficients up to ca. 0.55 cm s⁻¹), rather than a 4-electron process. These new data suggest that the treatment of oxygen reduction as a 4-electron transfer process at micron and smaller-sized copper intermetallics in aluminium alloys may require revision.     

An investigation of the chemiluminescence reaction in the sodium hypochlorite–folic acid–emicarbazide hydrochloride system

A chemiluminescence method for the determination of folic acid by the sodium hypochlorite–folic acid–semicarbazide hydrochloride system with a new flow injection technique has been established. The new method can perform simple, sensitive and rapid determinations of folic acid. The response to the concentration of folic acid, in the range of 1.0×10⁻⁷5.0×10⁻⁵ g/ml, is linear. The relative standard deviation of the method is 2.3% (C_s=4.0×10⁻⁶ g/ml, n=11). The detection limit is 2.7×10⁻⁸ g/ml. This method is suitable for automatic and continuous analysis, and has been successfully tested for the determination of folic acid in a folic acid tablet.     

Existence of clathrate-like structures in supercooled water: X-ray diffraction evidence

X-ray diffraction study of supercooled water has been performed using an imaging-plate X-ray detector down to −15 °C. The peak at 10.8 Å, which grows with decreasing temperature, in the radial distribution function {D(r) − 4πr²ρ₀} indicates the existence of clathrate-like structures in supercooled water. It is suggested that anomalous properties of water, which become more pronounced at low temperatures, are closely linked to the development of clathrate-like structures in water at low temperatures.     

Fabrication and superhydrophobicity of fluorinated titanium dioxide nanocoatings

This study demonstrates the fabrication of a stable superhydrophobic surface with low contact angle hysteresis (CAH) using an arrangement of nanoscale TiO₂ spheres. The control of precursor quantity is selected as the key factor in determining surface roughness that significantly intensifies water contact angle (CA) of TiO₂ films. After surface fluorination treatment, the anatase-type crystalline surfaces exhibit good water repellency (CA 166.1°), low CAH (6°), and superhydrophobic stability (>60 min). Enhanced water repellency is attributed to the fact that the higher density of TiO₂ spheres results in more tortuous three-phase contact line, leading to the self-cleaning effect. Such a unique textured surface imparts many promising potentials for engineering and the development of optics devices with robust superhydrophobic materials.     

Dual electrochemical microsensor for simultaneous measurements of nitric oxide and oxygen: Fabrication and characterization

A planar-type amperometric dual microsensor was developed for the simultaneous measurement of the nitric oxide (NO) and oxygen (O₂) concentrations. The sensor (overall diameter = 500 μm) consisted of a dual working electrode (WE) containing two platinized platinum microdisks (25 μm diameter, WE1, WE2, distance between two disks > 330 μm) and a Ag/AgCl wire reference electrode covered with an expanded poly(tetrafluoroethylene) gas-permeable membrane. The differentiation and concurrent measurements of NO and O₂ were obtained successfully using two sensing WEs with different applied potentials (+0.75 V for WE1 and −0.4 V for WE2). Cross-talk between WE1 and WE2 was eliminated with an optimized internal solution composition. Linear dynamic range, selectivity, sensitivity, detection limit (<5 nM for NO; <500 nM for O₂), and stability (>50 h) were evaluated.     

Solvent effect on the blue shifted weakly H-bound F3 CH…FCD3 complex

Solvent effect on the ν^c frequency of CH stretching vibration of the blue shifted F₃CH…FCD₃ complex has been studied in liquefied N₂, CO, Ar, Kr and Xe. In the case of Xe, the spectroscopic measurements have also been extended to the solid state. It was found that the ν^c position of the complex in the solutions studied lowers with respect to the value in the gas phase. In liquid Xe, characterized by the largest permittivity, this effect reaches its maximum value of −14.5 cm⁻¹. The ν^c frequency begins to grow again just below the freezing point of Xe, where a noticeable (15%) increase of the density of Xe occurs. The experimental results obtained for the liquid phase have been analyzed in the framework of the Onsager-like reaction field model and Polarizable Continuum Model (PCM) implemented into a standard Gaussian 98 Program.     

Phase behavior, microstructure transition, and antiradical activity of sucrose laurate/propylene glycol/the essential oil of Melaleuca alternifolia/water microemulsions

Nonionic sucrose ester microemulsions composed of sucrose laurate (SL), propylene glycol (PG) and water were prepared with the essential oil of Melaleuca alternifolia, commonly known as tea tree oil (TTO), as oil phase to investigate the phase behavior, microstructure, and antiradical activity. The pseudo-ternary phase diagrams were constructed to elucidate the phase behavior of the microemulsion formations at different weight ratios of surfactant and cosurfactant (S_m = SL/PG) of 1:1, 2:1, and 3:1. The extension of the microemulsion zone was found to be strongly dependent on the S_m ratios. The single phase microemulsion domain, especially o/w microemulsion region increased when S_m ratio is increased from 1:1 to 3:1 and no liquid crystalline structure was observed for all formulations studied. Microstructural aspects were studied by electrical conductivity and pulsed gradient spin echo (PGSE) NMR measurements along water titration line L28 (R_o = 2:8). The results from these combined techniques were in good agreement in regard to the microstructure transition points. The microstructural inversion of w/o to bicontinuous microemulsions occurred at 30 wt.% water while the transition from bicontinuous to o/w structure occurred at 55 wt.% water. The physical stability on storage temperature and time was examined by dynamic light scattering after the centrifuge test and freeze–thaw cycles. The droplet size was kept almost the same without any phase separation, providing less temperature-sensitivity up to 70 °C and good stability for 3 months at room temperature. The chemical profile and radical scavenging activity of TTO in o/w microemulsions was evaluated by means of gas chromatography–mass spectroscopy (GC–MS) and 2,2′-diphenyl-1-picrylhydrazyl free radical (DPPH) scavenging method, respectively. The major abundant constituents of crude TTO, monoterpene alcohols (terpinen-4-ol (41.65%), α-terpineol (3.18%)) and hydrocarbons (γ-terpinene (22.95%), α-terpinene (10.16%)) were identified and the composition percentage of each constituent was calculated form the GC peak areas by normalization method. The DPPH scavenging activity of TTO microemulsion was lower than pure TTO because the SL surfactant may obstruct the interaction between the TTO and DPPH, reducing the number of effective collisions.