共查询到19条相似文献,搜索用时 78 毫秒
1.
辐射接枝技术已成为高分子材料改性的重要方法之一.和传统化学接枝方法相比,辐射接枝技术具有操作简单,易于控制,不限制基材和单体等优点,近年来已被广泛应用于吸附材料的制备.采用辐射接枝技术制备的吸附材料,其功能团主要分布在基材表面,具有单体用量少,成本低,吸附脱附速度快,功能团利用率高,选择性好的特点.本文综述了近年来辐射接枝技术在制备选择性吸附材料方面的最新研究进展,包括对重金属、放射性核素、半金属、非金属、稀土元素、贵金属和染料等不同污染物吸附材料的合成及其应用,并对辐射接枝技术在制备吸附材料中的研究方向进行了展望. 相似文献
2.
纤维素基水处理剂研究进展 总被引:1,自引:0,他引:1
根据纤维素基水处理剂的结构特点对其进行了分类和划分,从载体形态、接枝链与载体接枝方法、功能吸附/脱附基团选取及功能化方法、吸附/脱附性能的影响因素和脱附方法等五个方面综述了国内外在该领域的研究现状;并对其发展前景进行了展望. 相似文献
3.
4.
温敏两亲性接枝物PAM-g-PNIPAm的合成及表征 总被引:1,自引:0,他引:1
以巯基乙胺为分子量调节剂,以丙烯酰氯作为链端转化剂合成了不同分子量的端丙烯酰胺基聚(N-异丙基丙烯酰胺)(PNIPAm)大分子单体;与丙烯酰胺共聚合,合成了以PNIPAm为侧链的接枝聚丙烯酰胺.用FTIR和1HNMR方法表征了接枝聚合物与大分子单体的组成.该接枝聚合物在水溶液中具有热缔合特性及明显的温敏增稠性,水溶液的粘度在32~50℃之间随温度增加而增加. 相似文献
5.
6.
7.
微载体因其具有较高的表面积/体积比等优点可以大大提高哺乳动物细胞培养效率,被广泛应用于生物制药和组织工程等领域。 但微载体多为一次性使用,不耐高温,且主要依赖进口,价格昂贵,因而限制了其国内的应用和推广。 聚醚醚酮(PEEK)材料具有良好的生物相容性、化学稳定性及耐高温等特性,是一种优异的微载体材料,但存在熔点高,加工方法单一和生物惰性等缺陷。 本文以浓硫酸为溶剂,乙醇溶液为萃取剂,采用气流辅助滴注/相分离法,将PEEK制备成448 μm左右,尺寸均匀的微球;经氨丙基三乙氧基硅烷(APTES)处理,获得表面氨基化修饰的PEEK微球(PEEK-N);进一步,以N,N'-羰基二咪唑(CDI)为活性中间体,将明胶分子接枝到PEEK-N微球表面,获得表面明胶修饰的PEEK微载体(PEEK-G)。 对材料的物理化学性质、表面接枝量进行表征;并通过体外细胞实验评估其细胞毒性、细胞粘附效率和细胞增殖能力。 结果显示,通过该方法制备成功了3种不同明胶接枝含量的PEEK细胞微载体(PEEK-G1,PEEK-G2,PEEK-G3),其中明胶含量较高的PEEK-G3毒性最低,细胞粘附和增殖效果最理想。 相似文献
8.
将具有温度响应的聚N-异丙基丙烯酰胺(PNIPAm)接枝到电纺纤维素纳米纤维膜上,制备温度响应型纤维素接枝聚N-异丙基丙烯酰胺(PNIPAm-g-Cell)纳米纤维水凝胶。研究接枝单体(N)与纤维素(c)的质量比、反应温度、反应时间和引发剂浓度对产物接枝率、溶胀性和形貌的影响。结果表明,最佳聚合反应条件为m(N)∶m(c)=15∶1、反应温度40℃、反应时间3 h、引发剂浓度为10 mmol/L,得到PNIPAm-g-Cell接枝率和溶胀率分别为35%和31%。与PNIPAm相比,PNIPAm-g-Cell水凝胶的低临界相转变温度(LCST)显著升高,说明亲水性纤维素的引入改变了体系的亲疏水平衡。去溶胀动力学测试表明,0.5 min内接枝率为25%和35%的水凝胶保水率分别降低至93%和61%。说明接枝率越高PNIPAm-g-Cell水凝胶对温度的响应速度越快,对温度越敏感。 相似文献
9.
10.
11.
Monti F Fu SY Iliopoulos I Cloitre M 《Langmuir : the ACS journal of surfaces and colloids》2008,24(20):11474-11482
Mixtures of alkali swellable microgels and linear PNIPAm chains exhibit doubly responsive properties both with pH and temperature. Below the lower critical solution temperature (LCST), the linear chains of PNIPAm are soluble and increase the osmotic pressure outside the microgels, which causes them to deswell. Above the LCST, the PNIPAm chains become insoluble and form spherical colloidal particles confined between the microgels that subsequently reswell. The swelling and deswelling of the microgels change the rheological properties of the composites, providing a unique way to tune the elasticity of the composites with temperature. The structure of the composites above the LCST is studied using multiple light scattering and fluorescence confocal microscopy. The phase separation of PNIPAm above the LCST is strongly affected by the confinement of the PNIPAm chains between the microgels. 相似文献
12.
Temperature-responsive poly(N-isopropylacrylamide) (PNIPAm)-encapsulated polystyrene latex was prepared via a layer-by-layer self-assembly of cationic and anionic polyNIPAms alternately. Studies showed that the size of PNIPAm-encapsulated polystyrene particles (m-PS) increased with the encapsulation manipulation, as verified by both transmission electron microscopy and dynamic light scattering measurements. The m-PS underwent a dramatic volume decrease at the lower critical solution temperature (LCST) of PNIPAm, with the onset temperature shifting to a higher temperature range as the number of encapsulating layers increased. A qualitative study on the adsorption behavior of Ag nanoparticles revealed that while the pristine (p) Ag nanoparticles were predominantly adsorbed on the m-PS below the LCST, the hydrophobically modified one (m-Ag) was preferentially adsorbed on the same PS above the LCST, which corresponded to the hydrophilic to hydrophobic transition of the m-PS at the LCST. 相似文献
13.
An amphiphilic graft polyphosphazene (PNIPAm/EAB-PPP) composed of oligo-poly(N-isopropylacrylamide) (PNIPAm) as hydrophilic segments and ethyl 4-aminobenzoate (EAB) as hydrophobic groups was synthesized via ring-opening polymerization and subsequent substitution reaction. The molar ratio of the PNIPAm segment to EAB group was 1.85:0.15. The lower critical solution temperature (LCST) of copolymer was 32.6 degrees C as determined by turbidity method. Micellization behavior of PNIPAm/EAB-PPP in an aqueous phase was characterized by fluorescence technique, 1H NMR, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The critical micelle concentration (CMC) of the graft copolymer in aqueous solution was 0.1mg/ml. The number-averaged particle size of spherical micelles was 80 nm at 25 degrees C with a narrow distribution. TEM also revealed that inter-micellar aggregation was induced in the micelle solution at temperature above LCST of graft copolymer. The thermosensitive PNIPAm/EAB-PPP micelles may be of help to regulate the loading and release of hydrophobic drugs. 相似文献
14.
Nile Red solvatochromism is used to monitor phase separation in concentrated poly(N-isopropyl acrylamide) (PNIPAm) aqueous solutions. Below the lower critical solution temperature (LCST), Nile Red molecules are in a polar environment and thus exhibit negligible fluorescence. Above the LCST, the aggregation of the PNIPAm chains into hydrophobic mesoglobules provides a nonpolar environment, causing a strong increase of fluorescence. The spectra show two emission bands, which can be related to the partitioning of Nile Red molecules between the core and the surface of the mesoglobules. More generally, the technique appears as a new and promising tool to probe microheterogeneities in polymer solutions or mixtures. 相似文献
15.
Prithankar Pramanik Suhrit Ghosh 《Journal of polymer science. Part A, Polymer chemistry》2015,53(21):2444-2451
The article describes synthesis and thermally triggered self‐assembly of a Poly (ethylene oxide)‐block‐poly (N‐insopropylacrylamide) (PEO‐b‐PNIPAm) in aqueous medium. At rt, the polymer remains as unimer, however, at lower critical solution temperature (LCST) of PNIPAm (32 °C), it forms a rather large undefined aggregate which at slightly elevated temperature (~40 °C) converges to well defined polymersome structure (Critical aggregation concentration = 0.45 mg/mL) with hydrodynamic diameter of 40–50 nm. By lowering the temperature, initial swelling of the compact vesicle followed by reversible disassembly to unimer was noticed. The polymersome exhibits encapsulation ability to a hydrophilic dye Calcein which can be spontaneously released by lowering the temperature below cloud point. Likewise a hydrophobic dye namely 8‐Anilino‐1‐naphthalenesulfonic acid (ANS) can also be encapsulated and released by thermal trigger. Detail photoluminescence studies reveal ANS dye can be used as a generalized probe molecule for detecting LCST of a thermoresponsive polymer by “fluorescence on” above LCST even by cursory observation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2444–2451 相似文献
16.
Bing Yu Justin W. Chan Charles E. Hoyle Andrew B. Lowe 《Journal of polymer science. Part A, Polymer chemistry》2009,47(14):3544-3557
Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by 1H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009 相似文献
17.
Julie Šťastná Lenka Hanyková Zdeňka Sedláková Helena Valentová Jiří Spěváček 《Colloid and polymer science》2013,291(10):2409-2417
The combination of 1H NMR spectroscopy, DSC, dynamic mechanical spectroscopy, and optical microscopy was used to investigate temperature-induced volume phase transition in hydrogels of interpenetrating networks (IPNs) poly(N-isopropylmethacrylamide)/poly(N-isopropylacrylamide) (PNIPMAm/PNIPAm) with various PNIPMAm content. In these IPNs, both networks are thermosensitive; such systems were not examined so far. All methods showed phase transition starting at 307 K, which is the volume phase transition temperature of PNIPAm, the major network component. Only the sample with the lowest content of PNIPAm (~54 %) shows two-step collapse transition, other samples with higher PNIPAm content show a single transition in NMR and DSC which indicates enhanced mutual entanglement of both components. In all samples, the phase transition results in substantial increase of both components of the shear modulus. Although the properties of all samples change with temperature in similar way, differences in dependence on the PNIPMAm content and the shape of the sample can be seen. 相似文献
18.
Thermally Responsive Hydrogel Blends: A General Drug Carrier Model for Controlled Drug Release 下载免费PDF全文
Chongbo Ma Ye Shi Danilo A. Pena Lele Peng Prof. Guihua Yu 《Angewandte Chemie (International ed. in English)》2015,54(25):7376-7380
Thermally responsive hydrogels have drawn significant research attention recently because of their simple use as drug carrier at human body temperature. Here we design a hybrid hydrogel that incorporates a hydrophilic polymer, polyethyleneimine (PEI), into the thermally responsive hydrogel poly(N‐isopropylacrylamide) (PNIPAm), as a general drug carrier model for controlled drug release. In this work, on one hand, PEI modifies the structure and the size of the pores in the PNIPAm hydrogel. On the other hand, PEI plays an important role in tuning the water content in the hydrogel and controls the water release rate of the hydrogel below the lower critical solution temperature (LCST), resulting in a tunable release rate of the drugs at human body temperature (37 °C). Different release rates are shown as different amounts of PEI are incorporated. PEI controls the release rate, dependent on the charge characteristics of the drugs. The hydrogel blends described in this work extend the concept of a general drug carrier for loading both positively and negatively charged drugs, as well as the controlled release effect. 相似文献
19.
Dr. Lara Frenzel Dr. Irina Lokteva Michael Koof Dr. Suresh Narayanan Prof. Dr. Gerhard Grübel Dr. Felix Lehmkühler 《Chemphyschem》2020,21(12):1318-1325
We study the structure and dynamics of poly(N-isopropylacrylamide) (PNIPAm) core-shell nanogels dispersed in aqueous trimethylamine N-oxide (TMAO) solutions by means of small-angle X-ray scattering and X-ray photon correlation spectroscopy (XPCS). Upon increasing the temperature above the lower critical solution temperature of PNIPAm at 33 °C, a colloidal gel is formed as identified by an increase of I(q) at small q as well as a slowing down of sample dynamics by various orders of magnitude. With increasing TMAO concentration the gelation transition shifts linearly to lower temperatures. Above a TMAO concentration of approximately 0.40 mol/L corresponding to a 1 : 1 ratio of TMAO and NIPAm groups, collapsed PNIPAm states are found for all temperatures without any gelation transition. This suggests that reduction of PNIPAm-water hydrogen bonds due to the presence of TMAO results in a stabilisation of the collapsed PNIPAm state and suppresses gelation of the nanogel. 相似文献