农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

磺胺异(口恶)唑印迹聚合物的制备与选择结合性能的研究

以磺胺异噁唑为模板分子,二甲基丙烯酸乙二醇酯为交联剂,分别用甲基丙烯酸和4-乙烯基吡啶为功能单体,采用牺牲硅胶法合成了磺胺异噁唑分子印迹聚合物;通过静态平衡结合法和Scatchard分析法,系统研究了不同单体对聚合物识别性能和选择性的影响;对比磺胺异噁唑和磺胺二甲嘧啶的结合特性,以4-乙烯基吡啶为功能单体的印迹聚合物具有较好的选择性;Scatchard分析表明,该印迹聚合物在印迹过程中形成了两类不同的结合位点,计算了离解常数分别为2.01×10-4和7.30×10-3mol/L.     

磺胺异噁唑印迹聚合物的制备与选择结合性能的研究

以磺胺异唑为模板分子, 二甲基丙烯酸乙二醇酯为交联剂, 分别用甲基丙烯酸和4_乙烯基吡啶为功能单体, 采用牺牲硅胶法合成了磺胺异唑分子印迹聚合物; 通过静态平衡结合法和Scatchard分析法, 系统研究了不同单体对聚合物识别性能和选择性的影响; 对比磺胺异唑和磺胺二甲嘧啶的结合特性, 以4_乙烯基吡啶为功能单体的印迹聚合物具有较好的选择性; Scatchard分析表明, 该印迹聚合物在印迹过程中形成了两类不同的结合位点, 计算了离解常数分别为2.01×10-4 和7.30×10-3 mol/L。     

沉淀聚合制备诺氟沙星-Zn2+分子印迹聚合物及其印迹方式的研究

采用沉淀聚合的方式以诺氟沙星(NFA)-Zn2+为模板分子,乙二醇二甲基丙烯酸酯为交联剂,分别选取酸性功能单体甲基丙烯酸与碱性功能单体4-乙烯基吡啶制备了诺氟沙星-Zn2+的分子印迹聚合物.通过紫外光谱研究发现诺氟沙星与Zn2+及两种功能单体均发生了金属配位印迹作用且形成了比例不同的印迹复合物.红外光谱的功能基团的表征结果显示,甲基丙烯酸与诺氟沙星-Zn2+形成了以诱导作用占优的三元配合物,而4-乙烯基吡啶则与诺氟沙星-Zn2+形成了共轭作用占优的三元配合物.扫描电镜及粒径分布实验表征了聚合物的物理特性,结果显示印迹聚合物的表面存在孔及孔道结构而非印迹聚合物的表面较致密不存在孔且制备的印迹聚合物的粒径均在100μm以下,其平均粒径为39μm.等温结合及选择性实验的结果表明4-乙烯基吡啶为功能单体制备的印迹聚合物的选择性识别性能优于甲基丙烯酸为功能单体制备的印迹聚合物,其特异性吸附容量和印迹指数分别为66.84μmol/g和4.207.同时在混合溶液的选择性实验中以4-乙烯基吡啶(4-VP)为功能单体制备的印迹聚合物的选择识别诺氟沙星的能力优于以甲基丙烯酸为功能单体的聚合物,其识别因子分别为3.408和2.909,而非印迹聚合物对底物的吸附量较小且识别因子均接近于1,说明非印迹聚合物对底物的识别为非选择性的.     

Synthesis of Norfloxacin-Zinc （II） Imprinted Polymer by Precipitation Polymerization and Study on Its Imprinting Form

采用沉淀聚合的方式以诺氟沙星（NFA）-Zn2＋为模板分子,乙二醇二甲基丙烯酸酯为交联剂,分别选取酸性功能单体甲基丙烯酸与碱性功能单体4-乙烯基吡啶制备了诺氟沙星-Zn2＋的分子印迹聚合物.通过紫外光谱研究发现诺氟沙星与Zn2＋及两种功能单体均发生了金属配位印迹作用且形成了比例不同的印迹复合物.红外光谱的功能基团的表征结果显示,甲基丙烯酸与诺氟沙星-Zn2＋形成了以诱导作用占优的三元配合物,而4-乙烯基吡啶则与诺氟沙星-Zn2＋形成了共轭作用占优的三元配合物.扫描电镜及粒径分布实验表征了聚合物的物理特性,结果显示印迹聚合物的表面存在孔及孔道结构而非印迹聚合物的表面较致密不存在孔且制备的印迹聚合物的粒径均在100μm以下,其平均粒径为39μm.等温结合及选择性实验的结果表明4-乙烯基吡啶为功能单体制备的印迹聚合物的选择性识别性能优于甲基丙烯酸为功能单体制备的印迹聚合物,其特异性吸附容量和印迹指数分别为66.84μmol/g和4.207.同时在混合溶液的选择性实验中以4-乙烯基吡啶（4-VP）为功能单体制备的印迹聚合物的选择识别诺氟沙星的能力优于以甲基丙烯酸为功能单体的聚合物,其识别因子分别为3.408和2.909,而非印迹聚合物对底物的吸附量较小且识别因子均接近于1,说明非印迹聚合物对底物的识别为非选择性的.     

香豆素分子模板聚合物的合成与性能研究

以香豆素为模板分子, α-甲基丙烯酸(MAA)、丙烯酰胺(MA)、2-乙烯基吡啶(2-VP)和4-乙烯基吡啶(4-VP)为功能单体, 二甲基丙烯酸乙二醇酯(EGDMA)为交联剂, 利用分子模板技术分别在甲苯、甲醇、氯仿和乙腈溶剂中合成了一系列香豆素分子模板聚合物(MTP), 研究了聚合体系组成对模板聚合物吸附特性的影响. 结果表明, 在所合成的模板聚合物中, 以MAA为功能单体, 乙腈为致孔溶剂, 以1∶4∶30的摩尔比加入模板分子、MAA及EGDMA时制备的模板聚合物吸附容量高、印迹效果和选择性好. 此模板聚合物有作为白芷样品中香豆素吸附分离材料的应用前景.     

丹酚酸A分子印迹聚合物制备及识别性能研究

以丹酚酸A为模板分子,丙烯酰胺(AM)、α-甲基丙烯酸(MAA)、2-乙烯基吡啶(2-VP)和4-乙烯基吡啶(4-VP)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,丙酮、乙酸乙酯、乙腈和甲醇为致孔剂,采用本体聚合法制备了一系列丹酚酸A分子印迹聚合物.通过静态平衡吸附实验和选择性实验考察了印迹聚合物的吸附性能...     

左旋氧氟沙星分子模板聚合物的分子识别

左旋氧氟沙星(Levofloxacin，LVLX)为新一代喹诺酮类合成抗菌药物，是氧氟沙星的光学活性S-(-)异构体，控制并检测人体中的左旋氧氟沙星浓度在临床检测和药代动力学方面具有重要意义。本实验以左旋氧氟沙星为模板分子，乙腈为溶剂，α-甲基丙烯酸(MAA)和4-乙烯基吡啶(4-VP)为功能基单体，乙二醇二甲基丙烯酸酯(EGDMA)为交联剂，采用分子模板技术合成了对左旋氧氟沙星具有特效选择性吸附的一种新型分子模板聚合物，并系统地研究了其吸附性质和分子识别功能。结果表明，模板聚合物比非模板聚合物对药物左旋氧氟沙星表现出较高的吸附能力和选择性。     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.