Spectrophotometric estimation of ketotifen fumarate in pharmaceutical formulations

Four simple and sensitive spectrophotometric methods (A–D) for the determination of Ketotifen fumarate in bulk samples and pharmaceutical formulations are described. They are based on the formation of coloured species by the coupling of the diazotised sulphanilamide with the drug (method A, _max 520 nm) or by oxidizing it with excessN-bromo-succinimide and determining the consumed NBS with decrease in colour intensity of celestine blue (method B: _max 540 nm) or by the reduction of Folin-Ciocalteau reagent (method C: _max 720 nm) or by the formation of a chloroform-soluble, coloured ionassociation complex between the drug and Azocarmine G at pH 1.5 (method D: _max 540 nm). Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 1–10, 2–12, 4–28 and 2.5–25 g/ml for methods A–D, respectively. The validity of the proposed methods was tested by analysing pharmaceutical formulations containing KTF: the relative standard deviations were within ±1.0%. Recoveries were 98.9–100.2%.     

Four spectrophotometric methods for determination of nitrofurazone in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric methods (A-D) for the determination of nitrofurazone in bulk samples and pharmaceutical formulations are described. They are based on the formation of colored species by treating either its reduction product with 3-methylbenzothiazolin-2-one hydrazone in the presence of ferric chloride (method A: _max 600 nm) or its hydrolysis product with thiobarbituric acid (method B: _max 520 nm, 440 nm) or barbituric acid (method C: _max 400 nm) or by oxidizing it with excess N-bromosuccinimide and determining the consumed NBS using metol-isonicotinic acid hydrazide (method D: _max 620 nm).     

Spectrophotometric determination of azathioprine in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric methods (A–D) have been described for the assay of azathioprine (ATP) either in pure form or in pharmaceutical formulations. Methods A and B are based on the oxidation of ATP with excess N-bromosuccinimide (NBS) or chloramine-T (CAT) and determining the consumed NBS or CAT with a decrease in colour intensity of celestine blue (CB) (method A) or gallocyanine (GC) (method B), respectively. Methods C and D are based on the diazotisation of reduced azathioprine (RATP) with excess nitrous acid and estimating either the consumed nitrous acid (HNO₂) with cresyl fast violet acetate (CFVA) (method C) or by coupling reaction of the diazonium salt formed with N-1-naphthyl ethylene diamine dihydrochloride (NED) (method D). All of the variables have been optimized and the reactions presented. The concentration measurements are reproducible within a relative standard deviation of 1.0%. Recoveries are 99.2–100.3%.     

Spectrophotometric determination of cysteine andN-acetylcysteine in pharmaceutical preparations

An accurate fast spectrophotometric method for the determination of cysteine andN-acetyl-cysteine is presented, based on the oxidation of these amino acids by ferric ions in the presence of ferrozine, whereby a violet-coloured complex is formed which absorbs at 562 nm. The method was satisfactory for the determination of cysteine andN-acetylcysteine in samples within the range 0.02–6.00 gml^–1. Effects of time, acidity, ferric ions, ferrozine, sodium perchlorate concentrations and the tolerance limit for other amino acids have been reported. The method was applied to the determination of cysteine in amino acids mixtures andN-acetylcysteine in pharmaceutical preparations.     

Spectrophotometric procedures for the determination of roxithromycin in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric procedures for the assay of roxithromycin (RXT) have been developed. Procedures A and B are based on the formation of ion-pairs of roxithromycin with the dyes supracen violet 3B and tropaeolin 000, which are extracted into chloroform and have absorption maxima at 590 nm (SV 3B) and 490 nm (TP 000). Procedures C and D are based on condensation between the hydrolysis product of RXT in the presence of 3.6M hydrochloric acid in acetic acid medium and vanillin orp-dimethylaminobenzaldehyde (PDAB) to form coloured products with _max at 500 nm. Regression analysis of the Beer's plot showed good correlation in the concentration ranges 5–60 (A), 5–40 (B) and 5–50 (C & D) g/ml. No interference was observed from excipients and the validity of the procedures was tested by analysing pharmaceutical formulations. Recoveries were 99.0–102.0%. The concentration measurements are reproducible within a relative standard deviation of 1.0%.     

Spectrophotometric study of the acid-base equilibria of an imidazobenzodiazepine,midazolam, and its determination in pharmaceutical formulations

The acid-base behaviour of midazolam, a psychotropic drug derived from imidazobenzodiazepine family, has been studied spectro-photometrically. This compound hydrolyzes at pH values lower than 4. Reversible cleavage of the azomethine bond takes place and the open-ring compound is in equilibrium with the closed-ring compound (protonated form of the parent drug). Absorbance-time data (measured at 225 nm and for different pH values) have been evaluated by a pseudo-first order logarithmic approach, leading to different apparent kinetic constants, depending on pH and temperature. A simple mechanism of hydrolysis, corresponding to fast protonation and slow hydrolysis with opening of the ring is in good agreement with the kinetic results. From data obtained at pH values greater than 4, the deprotonation constant of the nitrogen atom at position 2 of the imidazole ring has been calculated and a pK_a value of 5.50 ± 0.05 obtained. In addition, a Spectrophotometric method has been developed which allows the determination of midazolam at concentrations from 1.23 × 10^–6 M to 3.38 × 10^–5 M. This method has been applied to a pharmaceutical formulation midazolam; the Dormicum error, in terms of relative standard deviation, was lower than 1.5%.     

Indirect spectrophotometric determination of diltiazem hydrochloride in pure form and pharmaceutical formulations

Three simple, accurate, and sensitive spectrophotometric methods (A, B and C) have been described for the indirect assay of diltiazem hydrochloride (DIL.HCl), either in pure form or in pharmaceutical formulations. The first method (A) is based on the oxidation of DIL.HCl by N-bromosuccinimide (NBS) and determination of unconsumed NBS by measuring the decrease in absorbance of amaranth dye (AM) at a suitable λ _max =521 nm. Other methods (B) and (C) involve the addition of excess cerric ammonium sulfate (CAS) and subsequent determination of the unconsumed oxidant by a decrease in the red color of chromotrope 2R (C2R) at a suitable λ _max =528 nm or a decrease in the orange-pink color of rhodamine 6G (Rh6G) at λ _max =525 nm, respectively. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 3.0–9.0, 3.5–7.0 and 3.5–6.3 μg ml⁻¹ for methods A, B and C, respectively. The apparent molar absorptivity, Sandell's sensitivity, detection and quantification limits were calculated. The proposed methods have been applied successfully for the analysis of the drug in its pure form and its dosage form. No interference was observed from a common pharmaceutical adjuvant. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Spectrophotometric determination of 6-aminopenicillanic acid using bromophenol blue and bromothymol blue

Two simple, selective and sensitive spectrophotometric methods are described for the determination of 6-aminopenicillanic acid (6-APA). The methods are based on the reaction of 6-APA with either bromophenol blue (BPB) or bromothymol blue (BTB), to give orange-red and green species, respectively. The coloured products are quantified spectrophotometrically at 625 and 616 nm for BPB and BTB, respectively. The optimization of the different experimental conditions is described. No interferences from different -lactams and common degradation products were observed in the determination of 6-APA using BTB, while flucloxacillin, dicloxacillin, adrenaline, vitamin C, urea and common degradation products in any percentage interfere on using BPB only. The BTB method was better than the BPB method, because of its wider range of determination (0.4–20 g ml^–1 vs. 0.4–7.2 g ml^–1 on using BPB), higher molar absorptivity and Sandell sensitivity (3.27 × 10³l mol^–1 cm^–1 and 0.099 g cm^–2 vs. 2.82 × 10³lmol^–1 cm^–1 and 0.115 g cm^–2), greater stability (3 and 10 days on using BTB and BPB, respectively) and better selectivity. The results were compared with those given by the Official United States Pharmacopeial XXI method.     

Extractive-spectrophotometric methods for determination of anti-Parkinsonian drug in pharmaceutical formulations and in biological samples using sulphonphthalein acid dyes

A simple, accurate and highly sensitive spectrophotometric methods are proposed for the rapid and accurate determination of amantadine HCl (AMD) using bromocressol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB). The developed methods involve formation of stable yellow colored chloroform extractable ion-associate complexes of the amino derivative (basic nitrogen) of the AMD with three sulphonphthalein acid dyes, namely; BCG, BPB and BTB, in acidic medium. The ion-associates exhibit absorption maxima at 415, 412 and 414 nm for BCG, BPB and BTB, respectively. AMD can be determined up to 1.5–16.5, 1.4–14.0 and 1.6–17 μg mL^?1, respectively. The effect of optimum conditions via acidity, reagent concentration, time, and solvent was studied. The stoichiometry of the reaction was found to be 1:1 in all cases. The low relative standard deviation values indicate good precision and high recovery values. These methods have been successfully applied for the assay of AMD in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Microtitrimetric determination of salbutamol sulfate usingN-bromosuccinimide

A simple titrimetric method for the micro determination of salbutamol sulfate withN-bromosuccinimide is described. The method is simple, sensitive and can be utilized in the determination of salbutamol sulfate in microgram amounts. The results compare favorably with British Pharmacopeial method.     

Spectrophotometric determination of nitrite in environmental waters using column preconcentration on biphenyl

Column preconcentration methods have been established for the spectrophotometric determination of trace nitrite with sulfanilic acid (SA) orp-aminoacetophenone (AAP) as the diazotizable aromatic amine andN, N-dimethylaniline (DMA) or 1-aminonaphthalene (AN) as the coupling agent, using differention-pairs co-precipitated with biphenyl. Nitrite ion reacts with SA in the pH range 2.0–3.0 and AAP in the pH range 1.7–3.0 in HCl medium to form water-soluble colourless diazonium cations. These cations are subsequently coupled with DMA in the pH range 3.7–6.1 for the SA-DMA system and AN in the pH range 1.7–2.3 for the AAP-AN system to be retained on microcrystalline biphenyl packed in a column. The solid mass is dissolved out from the column with 5 ml of DMF and the absorbance is measured by a spectrophotometer at 420 nm for the SA-DMA system and at 517 nm for the AAP-AN system. The calibration was linear over the concentration ranges 0.3–6.0 g of nitrite in 5 ml of DMF solution (i.e., 0.02–0.40 g/ml in the sample solution) for the SA-DMA system and 0.5–7.0 g of nitrite in 5 ml of DMF solution (i.e., 0.03–0.47 g/ml in the sample solution) for the AAP-AN system. The molar absorptivity and Sandell's sensitivity were respectively 2.63 × 10⁴lmol^–1cm^–1 and 1.75 × 10^–3 g cm^–2 for SA-DMA and 3.28 × 10⁴lmol^–1 cm^–1 and 1.40 × 10^–3 g cm^–2 for AAP-AN. The concentration factors were 4 and 16 for SA-DMA and AAP-AN, respectively. The detection limits were 0.0138 and 0.0175 g/ml NO₂ ^– for SA-DMA and AAP-AN, respectively. Seven replicate determinations of a solution containing 3.5 g of nitrite gave mean absorbances of 0.410 and 0.500 with relative standard deviations of 0.51 and 0.55% for SA-DMA and AAP-AN, respectively. Interference from various foreign ions has been studied and the methods have been applied to the determination of nitrite in environmental samples.     

依文思蓝光度法测定阿昔洛韦及其分析应用

在pH 5.74 HAc-NaAc缓冲介质中, 阿昔洛韦(ACV)与依文思蓝(EB)反应形成离子缔合物, 溶液颜色发生明显改变, 最大褪色波长为638 nm. 在此波长处, 阿昔洛韦的浓度与褪色程度呈良好线性关系, 从而建立测定阿昔洛韦的光度法. 在最大褪色波长处, 阿昔洛韦的浓度在0～2.01×10-5 mol/L范围内遵守比尔定律, 表观摩尔吸光系数1.71×104 L·mol-1·cm-1, 检出限为7.47×10-7 mol/L. 方法具有较高的灵敏度和良好的选择性, 可用于实际药品、血浆及尿液中阿昔洛韦的测定.     

Spectrophotometric methods for the determination of omeprazole in bulk form and pharmaceutical formulations

Four simple and sensitive methods for the assay of omeprazole (OMZ) were developed. These methods are based on the formation of colored species by treating OMZ with 3-methyl-2-benzothiazolinone hydrazone (MBTH) following oxidation with ferric chloride (method A) or m-aminophenol following oxidation with chloramine-T (CAT) (method B) or Folin-Ciocalteau reagent (FC) (method D), or by oxidizing OMZ with excess N-bromosuccinimide (NBS) and determining the consumed NBS with a decrease in color intensity of Celestine blue (CB) (method C). All variables have been optimized. Regression analysis of Beer's plots showed good correlation in the concentration range of 1.0-10, 2.0-32, 0.4-2.4 and 0.8-10 mug ml(-1) for methods A, B, C and D, respectively. No interference was observed for formulation additives and the validity of each method was tested by analysing capsules containing OMZ. Recoveries were 98.7-100.1%.     

Spectrophotometric and titrimetric determination of gallium in minerals and ores using semimethylthymol blue

The composition, overall stability constant and molar absorptivity of the chelate of gallium(III) ion with semimethylthymol blue, SMTB, were determined spectrophotometrically in acetate buffer (pH 4.5–5). A violet Ga(SMTB) chelate was formed with logarithmic overall stability constant of 18.0±0.1 (I=0.1) and molar absorptivity of 4.25×10⁴l mol^–1cm^–1 (_max 580 nm). SMTB is proposed as a new reagent for the spectrophotometric determination of micro-molar amounts of gallium(III). The colour development depends on time, temperature, pH and buffer species. The interference of different cations, anions and organic acids on gallium(III) determination was also investigated. Beer's law was obeyed for 3.5–31.3 gGa(III)/25ml (0.14–1.25 g ml^–1). SMTB was used for the spectrophotometric determination of gallium in different grade minerals and ores and the results were of acceptable error and relative standard deviation. Comparison between the two suggested methods and atomic absorption spectrometry for Ga(III) determination was carried out.     

Spectrophotometric determination of hyoscine butylbromide and famciclovir in pure form and in pharmaceutical formulations

A simple, rapid, and extractive spectrophotometric method was developed for the determination of hyoscine butylbromide (HBB) and famciclovir (FCV) in pure and pharmaceutical formulations. These methods are based on the formation of yellow ion-pair complexes between the basic nitrogen of the drug and four sulphonphthalein acid dyes, namely; bromocresol green (BCG), bromothymol blue (BTB), bromocresol purple (BCP) and bromophenol blue (BPB) in phthalate buffer of pH range (3.0-3.5). The formed complexes were extracted with chloroform and measured at 420, 412, 409 and 415nm for HBB and at 418, 412, 407 and 414nm for FCV using BCG, BTB, BCP and BPB, respectively. The analytical parameters and their effects on the reported systems are investigated. Beer's law was obeyed in the range 1.0-20mugmL(-1) with correlation coefficient (n=6)>/=0.9997. The molar absorptivity, Sandell sensitivity, detection and quantification limits were also calculated. The composition of the ion pairs was found 1:1 by Job's method in all cases and the conditional stability constant (K(f)) of the complexes have been calculated. The free energy changes (DeltaG) were determined for all complexes formed. The proposed methods have been applied successfully for the analysis of the studied drugs in pure and pharmaceutical formulations with percentage recoveries ranges from 99.84 to 100.26. The results were in good agreement with those obtained by the official methods.     

Spectrophotometeric determination of someN-substituted phenothiazine derivatives usingN-bromophthalimide

A simple, rapid and sensitive spectrophotometric method is described for the quantitative determination ofN-substituted phenothiazines. The method depends on the formation of a stable phenothiazine free radical cation by the use ofN-bromophthalimide as oxidising agent in a strong acid medium (methanol/ sulphuric acid 1 1 v/v). The produced red or violet color possesses absorption maximum range from 500 to 530 nm. A linear relationship exists between the absorbance at (_max) and concentration in the range 5 to 40 g ml^–1 with apparent molar absorptivities range from 6 × 10³ to 12 × 10³1 mol^–1 cm^–1. The color is developed instantaneously for all the studied phenothiazines except for thioproperazine mesylate, trifluoperazine dihydrochloride and prochlorperazine mesylate that require 25, 15 and 25 min, respectively, for complete reaction. The developed colors are stable over 24 h. The average % recovery is 99.85±0.61 to 100.28±0.95. The method was applied successfully to the microdetermination of chlorpromazine HCl, promethazine HCl, pericyazine, thioproperazine mesylate, perphenazine, prochlorperazine mesylate, trimeprazine tartrate and trifluoperazine 2HCl either in pure form or incorporated in their pharmaceutical preparations. The results of analysis are in good agreement with those of the official B.P. 1988 and USP XXII.     

Fluorimetric determination of aminocaproic acid in pharmaceutical formulations using a sequential injection analysis system

A sequential injection analysis (SIA) methodology for the fluorimetric determination of aminocaproic acid in pharmaceutical formulations is proposed. The developed analytical procedure is based on the derivatisation reaction of the aminocaproic primary amine with o-phthalaldehyde (OPA) and N-acetylcysteine (NAC) and fluorimetric detection of the formed product (λ_ex = 350 nm; λ_em = 450 nm). The implementation of a SIA flow system allowed for the development of a simple, fast and versatile automated methodology, which exhibits evident advantages regarding the US Pharmacopoeia 24 (USP 24) reference procedure. By combining the SIA time-based sample insertion with a subsequent zone sampling approach, which permitted to select for detection of a well-defined sample zone, it was possible to implement an on-line dilution strategy that enabled the expansion of the analytical working range of the methodology, and thus its application in dissolution studies, without manifold re-configuration.Linear calibration plots were obtained for aminocaproic acid concentrations up to 6 × 10⁻⁵ mol l⁻¹. The developed methodology exhibit a good precision, with a R.S.D. < 2.0% (n = 15) and the detection limit was 2.5 × 10⁻⁷ mol l⁻¹. The obtained results complied with those furnished by the reference procedure with a relative deviation lower than 1.2%. No interference was found.     

Spectrophotometric determination of gold by reaction with molybdate and nile blue in the presence of PVA

A spectrophotometric method for the determination of gold has been developed, based on the reaction of gold(III) with molybdate and nile blue (NB) to form an ion-association complex in the presence of poly(vinyl alcohol). The molar absorptivity at 595 nm is 2.71 × 10⁵ l mol^–1 cm^–1. Beer's law is obeyed over the range 0–16 g of gold per 25 ml. The relative standard deviation evaluated from seven independent determinations of 0.4 g/ml of gold is 2.6%. The limit of detection is 0.011 g/ml. The molar ratio of Au to NB in the complex is established to be 1 2. Over 30 foreign ions were tested for interference; Pt(IV), Sb(III), W(VI) and SiO ₃ ^2– interfered and had to be separated from gold on polyurethane foam. The method can be applied to the spectrophotometric determination of trace amounts of gold in powdered carbon and some ores.     

Spectrophotometric methods for the determination of labetalol hydrochloride in pure and dosage forms

Simple and sensitive Spectrophotometric methods for the determination of labetalol hydrochloride are described. The first two are based on the oxidative coupling reaction of labetalol hydrochloride withp-N,N-dimethyl-phenylenediamine dihydrochloride (method A, _max 685 nm) and 3-methyl-2-benzothiazolinone hydrazone hydrochloride (method B, _max 545 nm) in the presence of sodium hypochlorite and eerie ammonium sulphate as oxidants, respectively. The third depends on the formation of an ion-association complex of labetalol hydrochloride with suprachen violet 3B at pH 1.3, which is extracted into chloroform (method C, _max 565 nm). The methods obey Beer's law and the precision and accuracy of the methods were checked against the B.P. reference method and the relative standard deviations were in the range 0.35–0.52%. These methods are applied to the determination of labetalol in dosage forms.