Probing the Pt Surface for Oxygen Reduction by Insertion of Ag

We report on the probing of the Pt surface for oxygen reduction reaction (ORR) by insertion of Ag. Therefore, PtAg bimetallic nanoparticles were prepared by pulse electrodeposition. In a second step, Ag was electro‐dissolved in acidic media from the particles under formation of Pt skeleton. The ORR activity of these Pt skeleton depends on two factors: (1) on the surface properties of the Pt‐shell and (2) on the electronic as well as geometric influences of the remaining Ag in the particle core. By varying the conditioning procedure prior to measuring the ORR activity, we were able to differentiate between these two effects.     

Ag on Pt(111): Changes in Electronic and CO Adsorption Properties upon PtAg/Pt(111) Monolayer Surface Alloy Formation

The electronic and chemical (adsorption) properties of bimetallic Ag/Pt(111) surfaces and their modification upon surface alloy formation, that is, during intermixing of Ag and Pt atoms in the top atomic layer upon annealing, were studied by X‐ray photoelectron spectroscopy (XPS) and, using CO as probe molecule, by temperature‐programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRRAS), respectively. The surface alloys are prepared by deposition of sub‐monolayer Ag amounts on a Pt(111) surface at room temperature, leading to extended Ag monolayer islands on the substrate, and subsequent annealing of these surfaces. Surface alloy formation starts at ≈600–650 K, which is evidenced by core‐level shifts (CLSs) of the Ag(3d_5/2) signal. A distinct change of the CO adsorption properties is observed when going to the intermixed PtAg surface alloys. Most prominently, we find the growth of a new desorption feature at higher temperature (≈550 K) in the TPD spectra upon surface alloy formation. This goes along with a shift of the CO_ad‐related IR bands to lower wave number. Surface alloy formation is almost completed after heating to 700 K.     

Carbon-supported Pt^Ag nanostructures as cathode catalysts for oxygen reduction reaction

Pt(m)^Ag nanostructures (m being the atomic Pt/Ag ratio, m = 0.1-0.6) were prepared by reflux citrate reduction of PtCl(6)(2-) ions in aqueous solution containing colloidal Ag (6.3 ± 3.9 nm). A distinct alloying of Pt with Ag was detected due to an involvement of the galvanic replacement reaction between PtCl(6)(2-) and metallic Ag colloids. The nanostructure transformed from a structure with an Ag-core and an alloyed PtAg-shell to a hollow PtAg alloy structure with the increase in m. Compared to a commercial E-TEK Pt/C catalyst, the catalytic performance of Pt in the Pt(m)^Ag/C samples for the cathode oxygen reduction reaction (ORR) strongly correlated with the electronic structure of Pt, as a consequence of varied Pt dispersion and Pt-Ag interaction. With either H(2)SO(4) or KOH as an electrolyte, Pt in the Pt(m)^Ag nanostructures with a relatively high m (≥0.4) showed significantly enhanced intrinsic activity whereas Pt in those catalysts with low m (≤0.2) appeared less active than the Pt/C catalyst. These data are used to discuss the role of electronic structure and geometric effects of Pt toward ORR.     

A Strategy to Promote the Electrocatalytic Activity of Spinels for Oxygen Reduction by Structure Reversal

The electrocatalytic performance of a spinel for the oxygen reduction reaction (ORR) can be significantly promoted by reversing its crystalline structure from the normal to the inverse. As the spinel structure reversed, the activation and cleavage of O?O bonds are accelerated owing to a dissimilarity effect of the distinct metal atoms co‐occupying octahedral sites. The Co^IIFe^IIICo^IIIO₄ spinel with the Fe and Co co‐occupying inverse structure exhibits an excellent ORR activity, which even exceeds that of the state‐of‐the‐art commercial Pt/C by 42 mV in alkaline medium.     

Probing the Redox Chemistry of Titanium Silicalite‐1: Formation of Tetrahedral Ti3+ Centers by Reaction with Triethylaluminum

Transition‐metal ions with open‐shell configurations hold promise in the development of novel coordination chemistry and potentially unprecedented redox catalysis. Framework‐substituted Ti³⁺ ions with tetrahedral coordination are generated by reductive activation of titanium silicalite‐1 with triethylaluminum, an indispensable co‐catalyst for heterogeneous Ziegler–Natta polymerization catalysts. Continuous‐wave and pulse electron paramagnetic resonance methods are applied to unravel details on the local environment of the reduced transition metal‐ions, which are shown to be part of the silica framework by detection of ²⁹Si hyperfine interactions. The chemical accessibility of the reduced sites is probed using ammonia as probe molecule. Evidence is found for the coordination of a single ammonia molecule. Comparison to similar systems, such as TiAlPO‐5, reveals clear differences in the coordination chemistry of the reduced Ti sites in the two solids, which may be understood considering the different electronic properties of the solid frameworks.     

Discrete Silver(I)‐Palladium(II)‐Oxo Nanoclusters, {Ag4Pd13} and {Ag5Pd15}, and the Role of Metal–Metal Bonding Induced by Cation Confinement

We introduce the class of discrete silver(I)‐palladium(II)‐oxo nanoclusters with the preparation of {Ag₄Pd₁₃} and {Ag₅Pd₁₅}. Both polyanions represent the first examples of noble metal‐capped polyoxo‐noble‐metalates in a fully inorganic assembly, featuring an unprecedented host–guest mode containing hetero‐ and homometallic Ag–Pd and Ag–Ag bonding interactions. Comprehensive theoretical calculations suggest that the Ag–Pd metallic bonds originate partially from surface confinement of Ag^I guest ions onto the anionic polyoxopalladate host that is induced by strong electrostatic forces. This work opens the field of fully inorganic silver‐palladium‐oxo nanoclusters, which can be considered as discrete mixed noble metal precursors for the formation of monodisperse core–shell nanoparticles, with high relevance for catalysis.     

Synthesis and Characterization of Copolymercore-Silvershell Composite Microspheres

Composite microspheres composed of monodispersed poly（St-co-MAA） latices with diameter about 260 nm as core and Ag nanocrystals as shell were prepared by an in situ reduction method. The shell thickness could be controlled in the range of 15--45 nm by this coating process. The structure and the composition of the core-shell microspheres were characterized by transmission electron microscopy （TEM）, X-ray diffractometry （XRD）, X-ray photoelectron spectroscopy （XPS）, and thermogravimetric analysis （TG）. The formation of the composite microspheres is explained by the nucleation of silver on the surface of the latices followed by growth of the silver shell.     

Ag@Au Core‐Shell Nanowires for Nearly 100 % CO2‐to‐CO Electroreduction

Electrochemical reduction of carbon dioxide (CO₂) to CO is regarded as an efficient method to utilize the greenhouse gas CO₂, because the CO product can be further converted into high value‐added chemicals via the Fisher–Tropsch process. Among all electrocatalysts used for CO₂‐to‐CO reduction, Au‐based catalysts have been demonstrated to possess high selectivity, but their precious price limits their future large‐scale applications. Thus, simultaneously achieving high selectivity and reasonable price is of great importance for the development of Au‐based catalysts. Here, we report Ag@Au core–shell nanowires as electrocatalyst for CO₂ reduction, in which a nanometer‐thick Au film is uniformly deposited on the core Ag nanowire. Importantly, the Ag@Au catalyst with a relative low Au content can drive CO generation with nearly 100 % Faraday efficiency in 0.1 m KCl electrolyte at an overpotential of ca. ?1.0 V. This high selectivity of CO₂ reduction could be attributed to a suitable adsorption strength for the key intermediate on Au film together with the synergistic effects between the Au shell and Ag core and the strong interaction between CO₂ and Cl^? ions in the electrolyte, which may further pave the way for the development of high‐efficiency electrocatalysts for CO₂ reduction.     

Core Modulation of 70‐Nuclei Core‐Shell Silver Nanoclusters

The reaction of {(HNEt₃)₂[Ag₁₀(tBuC₆H₄S)₁₂]}_n, Ag₂O, Na₂MoO₄, and m‐methoxybenzoic acid (Hmbc) in CH₃OH/CH₂Cl₂ led to yellow crystals of [Ag₄S₄ (MoO₄)₅@Ag₆₆] (SD/Ag70b; SD=SunDi) only, while in the presence of DMF, additional dark‐red crystals of [Ag₁₀@ (MoO₄)₇@Ag₆₀] (SD/Ag70a) were obtained. SD/Ag70b consists of five MoO₄^2? ions wrapped by a shell of 66 Ag atoms, while SD/Ag70a contains a rare Ag₁₀ kernel consisting of five tetrahedra sharing faces and edges, surrounded by seven MoO₄^2? ions enclosed in a shell of 60 Ag atoms. The formation of the Ag₁₀ kernel originates from a reduction reaction during the self‐assembly process that involves DMF. This work provides the structural information of a unique Ag₁₀ kernel (five fused Ag₄ tetrahedra) and paves an avenue to trap elusive silver species with hierarchical multi‐shell silver nanocluster assemblies with the help of anion templates.     

Dealloyed carbon-supported PtAg nanostructures: Enhanced electrocatalytic activity for oxygen reduction reaction

Dealloyed PtAg/C nanostructures, prepared by selective electrochemical etching of Ag in 0.5 M H₂SO₄ from a series of alloyed Pt_mAg/C samples with atomic Pt/Ag ratio m = 0.1, 0.5, 1.0 and 1.5, were employed as cathode electrocatalysts for oxygen reduction reaction (ORR) in 0.5 M KOH. Compared with their as-prepared counterpart alloy catalysts, the dealloyed catalysts showed higher half-wave potentials (E_1/2) and significantly higher Pt mass-specific activity (MSA) data. The intrinsic activity (IA) of Pt increased more or less after the dealloying treatment but was strongly dependent on the composition (m) of the alloyed sample. The Pt IA numbers were comparable for the dealloyed catalysts derived from Pt_mAg/C of m = 0.5, 1.0 and 1.5, which were nearly twice that for E-TEK Pt/C catalyst and 3 times that for the dealloyed catalyst derived from Pt_0.1Ag/C.     

Dealloying to Nanoporous Silver and Its Implementation as a Template Material for Construction of Nanotubular Mesoporous Bimetallic Nanostructures

Nanoporous silver (NPS) is fabricated by selectively dissolving Al from AgAl alloys in corrosive electrolytes at room temperature. Electron spectroscopy characterizations demonstrate that the NaOH electrolyte is beneficial to the formation of a three‐dimensional bicontinuous porous nanostructure with uniform and tunable pore and ligament dimensions of a few tens of nanometers, while processing in HCl electrolyte easily lead to coarsened porous nanostructures. The high‐surface‐area Ag nanostructures are demonstrated as novel effective template materials to the construction of nanotubular mesoporous Pt/Ag and Pd/Ag alloy structures, which are realized via room temperature galvanic replacement reactions with H₂PtCl₆ and K₂PdCl₄ solutions by adding a high concentration of Cl^? ions as a coordinating agent. Electrochemical measurements indicate that the resulting hollow and porous bimetallic nanostructures show enhanced electrocatalytic activities and CO‐tolerance with better durability toward methanol and formic acid oxidation due to alloying with Ag.     

Polyaniline‐Modified Silver and Binary Silver‐Cobalt Catalysts for Oxygen Reduction Reaction

Novel dendrite‐like silver particles were electrodeposited on Ti substrates from a supporting electrolyte‐free 30 mmol L^?1 Ag(NH₃)₂⁺ solution, to synthesize the den‐Ag/Ti electrode. Binary Ag_xCo_y/Ti electrodes with different Ag:Co atomic ratios were further obtained by electrodeposition of Co particles on the den‐Ag/Ti electrode. Polyaniline (PANI) modified den‐Ag/Ti and Ag_xCo_y/Ti electrodes, PANI(n)‐den‐Ag/Ti and PANI(n)‐Ag_xCo_y/Ti, were also obtained by cyclic voltammetry at different numbers of cycles (n) in acidic and alkaline solutions containing aniline, respectively. All these electrodes exhibit high electroactivity for oxygen reduction reaction (ORR) in alkaline solution and their electroactivities follow the order: PANI(15)‐Ag₃₁Co₆₉/Ti>Ag₃₁Co₆₉/Ti>PANI(20)‐den‐Ag/Ti>den‐Ag/Ti. Among them, PANI(15)‐Ag₃₁Co₆₉/Ti displays the highest electrocatalytic activity for ORR with a much positive onset potential of 0 V (vs. Ag/AgCl) and a high ORR current density of 1.2 mA cm^?2 at ?0.12 V (vs. Ag/AgCl). The electrocatalysts are electrochemically insensitive to methanol and ethanol oxidation, and, as cathode electrocatalysts of direct alcohol fuel cells, can resist poisoning by the possible alcohol crossover from the anode.     

Charge Separation and Catalytic Activity of Fe3O4@Ag “Nanospheres”

Nanospheres of Ag‐coated Fe₃O₄ were successfully synthesized and characterized. Photocatalytic properties of Fe₃O₄@Ag composites have been investigated using steady‐state studies and laser pulse excitations. Accumulation of the electrons in the Ag shell was detected from the shift in the surface plasmon band from 430 to 405 nm, which was discharged when an electron acceptor such as O₂, Thionine (TH) or C₆₀ was introduced into the system. Charge equilibration with redox couple such as C₆₀^●–/C₆₀ indicated the ability of these core–shell structures to carry out photocatalytic reduction reactions. As well, outer Ag layer could boost charge separation in magnetic core through dual effects of Schottky junction and localized surface plasmonic resonance (LSPR)‐powered band gap breaking effect under sunlight irradiation; resulted in higher photocatalytic degradation of diphenylamine (DPA). The maximum photocatalytic degradation rate was achieved at optimum amount of Ag‐NP loading to products. Adsorption studies confirmed that degradation of DPA dominantly occurred in solution. Moderately renewability of the nanocatalysts under sunlight was due to oxidation and dissolution of the outer Ag layer.     

Facile Synthesis of Carbon‐Supported Ultrasmall Ag@Pd Core‐Shell Nanocrystals with Superior Electrocatalytic Activity for Direct Formic Acid Fuel Cell Application

To design electrocatalysts with excellent performance, morphology, composition and structure is a decisive influential factor. In this work, ultrasmall Ag@Pd core‐shell nanocrystals supported on Vulcan XC72R carbon with different Ag/Pd atomic ratios are synthesized via a facile successive reduction approach with formaldehyde and ethylene glycol as reducing agents, respectively. The Ag‐core/Pd‐shell nanostructures are revealed by high‐resolution transmission electron microscopy (HRTEM). Ag@Pd core‐shell nanocrystals possess a narrow size distribution with an average size of ca. 4.3 nm. In comparison to monometallic Pd/C and commercial Pd black catalysts, such Ag@Pd core‐shell nanocrystals display excellent electrocatalytic activities for formic acid oxidation, which may be due to high Pd utilization derived from the formation of Ag@Pd core‐shell nanostructure and the strong interaction between Ag and Pd.     

Microstructure and electrochemically active surface area of PtM/C electrocatalysts

The results of the study of microstructural parameters and the data on the electrochemically active surface area of Pt/C and Pt₅₀M₅₀/C (M = Ni, Cu, Ag) catalysts in 1 M H₂SO₄ solutions are compared. The metal-carbon nanomaterials were prepared by the method of chemical reduction of metals from the organoaqueous solutions of their compounds. The loading of metal component in them was 30–33 wt %. It is found that actual composition of metal component in the synthesized binary systems fits best the theoretically expected one (1: 1) for the PtAg/C catalyst whereas in the PtNi/C and PtCu/C systems, a considerable fraction of alloying component is present in the form of the corresponding oxides. A decrease in the average size of crystallites of metal component from 3.8 to 1.6 nm in the series of studied materials PtAg/C > Pt/C ≥ PtCu/C s> PtNi/C does not correspond to the character of the variation of electrochemically active surface area of the catalysts: PtNi/C ≈ PtCu/C < Pt/C ≪ PtAg/C increasing from 16–20 to 62–69 m²/g(Pt). The contradiction can be caused by the preferential segregation of platinum on the surface of nanoparticles of PtAg alloy, a higher degree of agglomeration of smaller nanoparticles, and, in the case of PtNi/C and PtCu/C materials, also by the insulation of a fraction of nanoparticle surface area by the corresponding oxides.     

Controlled Synthesis of N‐Doped Carbon Nanospheres with Tailored Mesopores through Self‐Assembly of Colloidal Silica

Limited strategies have been established to prepare monodisperse mesoporous carbon nanospheres (MCNs) with tailored pore sizes. In this work, a method is reported to synthesize MCNs by combining polymerization of aniline with co‐assembly of colloidal silica nanoparticles. The controlled self‐assembly behavior of colloidal silica enables the formation of uniform composite nanospheres and convenient modulation over mesopores. After carbonization and removal of sacrificial templates, the resultant MCNs possess tunable mesopores (7–42 nm) and spherical diameters (90–300 nm), as well as high surface area (785–1117 m² g^?1), large pore volume (1.46–2.01 cm³ g^?1) and abundant nitrogen moieties (5.54–8.73 at %). When serving as metal‐free electrocatalysts for the oxygen reduction reaction (ORR), MCNs with an optimum pore size of 22 nm, compared to those with 7 and 42 nm, exhibit the best ORR performance in alkaline medium.     

Paper-derived cobalt and nitrogen co-doped carbon nanotube@porous carbon as a nonprecious metal electrocatalyst for the oxygen reduction reaction

The oxygen reduction reaction (ORR) is a vitally important process in fuel cells. The development of high-performance and low-cost ORR electrocatalysts with outstanding stability is essential for the commercialization of the electrochemical energy technology. Herein, we report a facile synthesis of cobalt (Co) and nitrogen (N) co-doped carbon nanotube@porous carbon (Co/N/CNT@PC-800) electrocatalyst through a one-step pyrolysis of waste paper, dicyandiamide, and cobalt(II) acetylacetonate. The surface of the hierarchical porous carbon supported a large number of carbon nanotubes (CNTs), which were derived from dicyandiamide through the catalysis of Co. The addition of Co resulted in the formation of a hierarchical micro/mesoporous structure, which was beneficial for the exposure of active sites and rapid transportation of ORR-relevant species (O₂, H⁺, OH^?, and H₂O). The doped N and Co formed more active sites to enhance the ORR activity of the electrocatalyst. The Co/N/CNT@PC-800 material exhibited optimal ORR performance with an onset potential of 0.005 V vs. Ag/AgCl and a half-wave potential of –0.173 V vs. Ag/AgCl. Meanwhile, the electrocatalyst showed an excellent methanol tolerance and a long-term operational durability than that of Pt/C, as well as a quasi-four-electron reaction pathway. The low-cost and simple synthesis approach makes the Co/N/CNT@PC-800 a prospective electrocatalyst for the ORR. Furthermore, this work provides an alternative approach for exploring the use of biomass-derived electrocatalysts for renewable energy applications.     

Low‐Pt Loaded on a Vanadium Nitride/Graphitic Carbon Composite as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

The high cost of platinum electrocatalysts for the oxygen reduction reaction (ORR) has hindered the commercialization of fuel cells. An effective support can reduce the usage of Pt and improve the reactivity of Pt through synergistic effects. Herein, the vanadium nitride/graphitic carbon (VN/GC) nanocomposites, which act as an enhanced carrier of Pt nanoparticles (NPs) towards ORR, have been synthesized for the first time. In the synthesis, the VN/GC composite could be obtained by introducing VO₃^? and [Fe(CN)₆]^4? ions into the polyacrylic weak‐acid anion‐exchanged resin (PWAR) through an in‐situ anion‐exchanged route, followed by carbonization and a subsequent nitridation process. After loading only 10 % Pt NPs, the resulting Pt‐VN/GC catalyst demonstrates a more positive onset potential (1.01 V), higher mass activity (137.2 mA mg^?1), and better cyclic stability (99 % electrochemical active surface area (ECSA) retention after 2000 cycles) towards ORR than the commercial 20 % Pt/C. Importantly, the Pt‐VN/GC catalyst mainly exhibits a 4 e^?‐transfer mechanism and a low yield of peroxide species, suggesting its potential application as a low‐cost and highly efficient ORR catalyst in fuel cells.     

A General and High‐Yield Galvanic Displacement Approach to Au?M (M=Au,Pd, and Pt) Core–Shell Nanostructures with Porous Shells and Enhanced Electrocatalytic Performances

In this work, we utilize the galvanic displacement synthesis and make it a general and efficient method for the preparation of Au? M (M=Au, Pd, and Pt) core–shell nanostructures with porous shells, which consist of multilayer nanoparticles. The method is generally applicable to the preparation of Au? Au, Au? Pd, and Au? Pt core–shell nanostructures with typical porous shells. Moreover, the Au? Au isomeric core–shell nanostructure is reported for the first time. The lower oxidation states of Au^I, Pd^II, and Pt^II are supposed to contribute to the formation of porous core–shell nanostructures instead of yolk‐shell nanostructures. The electrocatalytic ethanol oxidation and oxygen reduction reaction (ORR) performance of porous Au? Pd core–shell nanostructures are assessed as a typical example for the investigation of the advantages of the obtained core–shell nanostructures. As expected, the Au? Pd core–shell nanostructure indeed exhibits a significantly reduced overpotential (the peak potential is shifted in the positive direction by 44 mV and 32 mV), a much improved CO tolerance (I_f/I_b is 3.6 and 1.63 times higher), and an enhanced catalytic stability in comparison with Pd nanoparticles and Pt/C catalysts. Thus, porous Au? M (M=Au, Pd, and Pt) core–shell nanostructures may provide many opportunities in the fields of organic catalysis, direct alcohol fuel cells, surface‐enhanced Raman scattering, and so forth.     

Synthesis of Mesoporous Transition‐Metal Phosphates by Polymeric Micelle Assembly

Mesoporous iron phosphate (FePO₄) was synthesized through assembly of polymeric micelles made of asymmetric triblock co‐polymer (polystyrene‐b‐poly‐2‐vinylpyridine‐b‐ethylene oxide; PS‐PVP‐PEO). The phosphoric acid solution stimulates the formation of micelles with core–shell‐corona architecture. The negatively charged PO₄^3? ions dissolved in the solution strongly interact with the positively charged PVP⁺ units through an electrostatic attraction. Also, the presence of PO₄^3? ions realizes a bridge between the micelle surface and the metal ions. The removal of polymeric template forms the robust framework of iron phosphate with 30 nm pore diameter and 15 nm wall thickness. Our method is applicable to other mesoporous metal phosphates by changing metal sources. The obtained materials were fully characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), N₂ adsorption–desorption, Raman spectroscope, and other techniques.