Molecular Recognition Ability of Molecularly Imprinted Polymer Nano- and Micro-Particles by Reversible Addition-Fragmentation Chain Transfer Polymerization

The role of molecularly imprinted polymers (MIPs) is changing from academic to applied researches. Challenging problems about MIP will be more highlighted in applicable uses and solving these problems is vital. The controlled/“living” radical polymerization (CLRP) techniques are applicable to solve the challenging problems in MIPs. The “living” nature of CLRP helps to improve the heterogeneity of binding sites in MIPs as a main challenge where precise control over sizes, compositions, and surface functionalities is achieved. Among different techniques of CLRP, reversible addition-fragmentation chain transfer (RAFT) technique presents distinguished benefits such as compatibility and tolerance to a wide range of functional monomers and mild reaction conditions rather than other CLRP techniques. In this review, in order to obtain more insights into the potential benefits of RAFT polymerization in fabrication of nano and micro MIP networks, recent research in advanced MIP materials for different templates with improved morphology, efficiency, and binding capacities with respect to traditional free radical polymerization (FRP) will be discussed. MIPs prepared via RAFT method have advantages of MIPs as high performance molecular recognition devices and CLRP as controllable polymerization mechanism, simultaneously.     

Mechanism study and molecular design in controlled/“living” radical polymerization

This tutorial review summarizes recent progress in the research field of controlled/“living” radical polymerization (CLRP) from Soochow University. The present paper gives a broad overview of the mechanism study and molecular design in CLRP. The mechanism study in CLRP aided by microwave, initiated by γ-radiation at low temperature, mediated by iron, in reversible addition-fragmentation chain transfer (RAFT) polymerization and the mechanism transfer between different CLRP processes are reviewed and summarized. The molecular design in CLRP, especially in RAFT polymerization for mechanism study, and in achieving tailor-made functional polymers is studied and discussed in the later part.     

Preparation of thermoresponsive polymers bearing amino acid diamide derivatives via RAFT polymerization

We report here the synthesis of well‐defined homopolymer bearing amino acid diamide, poly(N‐acryloyl‐L ‐valine N′‐methylamide), via reversible addition fragmentation chain transfer (RAFT) polymerization using alkynyl‐functionalized 2‐dodecylsulfanylthiocarbonylsulfanyl‐2‐methyl‐propionic acid propargyl alcohol ester as chain transfer agent (CTA) and 2,2′‐azobis(isobutyronitrile) as initiator. The effects of a variety of parameters, such as temperature and solvent, on RAFT polymerization were examined to determine the optimal control of the polymerization. The controlled nature of RAFT polymerization was evidenced by the controllable molecular weight and low‐molecular‐weight polydispersity index (M_w/M_n) of resulting homopolymers and further demonstrated to have retained end‐group functionality by the fact of the successful formation of block copolymers from further RAFT polymerization by using the resultant polymer as macro‐CTA, as well as from “click” chemistry. Thermoresponsive property of the prepared polymer was evaluated in terms of the lower critical solution temperature in aqueous solution by measuring the transmittance variation at 500 nm from UV/vis spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3573–3586, 2010     

SET‐RAFT of MMA mediated by ascorbic acid‐activated copper oxide

In this work, cupric oxide (CuO) or cuprous oxide (Cu₂O) was used as the catalyst for the single electron transfer‐reversible addition‐fragmentation chain transfer (SET‐RAFT) polymerization of methyl methacrylate in the presence of ascorbic acid at 25 °C. 2‐Cyanoprop‐2‐yl‐1‐dithionaphthalate (CPDN) was used as the RAFT agent. The polymerization occurred smoothly after an induction period arising from the slow activation of CuO (or Cu₂O) and the “initialization” process in RAFT polymerization. The polymerizations conveyed features of “living”/controlled radical polymerizations: linear evolution of number‐average molecular weight with monomer conversion, narrow molecular weight distribution, and high retention of chain end fidelity. From the polymerization profile, it was deduced that the polymerization proceeded via a conjunct mechanism of single electron transfer‐living radical polymerization (SET‐LRP) and RAFT polymerization, wherein CPDN acting as the initiator for SET‐LRP and chain transfer agent for RAFT polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An Oxygen‐Tolerant PET‐RAFT Polymerization for Screening Structure–Activity Relationships

The complexity of polymer–protein interactions makes rational design of the best polymer architecture for any given biointerface extremely challenging, and the high throughput synthesis and screening of polymers has emerged as an attractive alternative. A porphyrin‐catalysed photoinduced electron/energy transfer–reversible addition‐fragmentation chain‐transfer (PET‐RAFT) polymerisation was adapted to enable high throughput synthesis of complex polymer architectures in dimethyl sulfoxide (DMSO) on low‐volume well plates in the presence of air. The polymerisation system shows remarkable oxygen tolerance, and excellent control of functional 3‐ and 4‐arm star polymers. We then apply this method to investigate the effect of polymer structure on protein binding, in this case to the lectin concanavalin A (ConA). Such an approach could be applied to screen the structure–activity relationships for any number of polymer–protein interactions.     

Reversible addition–fragmentation chain transfer polymerization of 2‐naphthyl acrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

The reversible addition–fragmentation chain transfer (RAFT) polymerizations of 2‐naphthyl acrylate (2NA) initiated by 2,2′‐azobisisobutyronitrile were investigated with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as a RAFT agent at various temperatures in a benzene solution. The results of the polymerizations showed that 2NA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion. The polydispersities of the polymer were relatively low up to high conversions in all cases. The chain‐extension reactions of poly(2‐naphthyl acrylate) (P2NA) with methyl methacrylate and styrene successfully yielded poly(2‐naphthyl acrylate)‐b‐poly(methyl methacrylate) and poly(2‐naphthyl acrylate)‐b‐polystyrene block polymers, respectively, with narrow polydispersities. The P2NA obtained by RAFT polymerization had a strong ultraviolet absorption at 270 nm, and the molecular weights had no apparent effect on the ultraviolet absorption intensities; however, the fluorescence intensity of P2NA increased as the molecular weight increased and was higher than that of 2NA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2632–2642, 2005     

Stability and utility of pyridyl disulfide functionality in RAFT and conventional radical polymerizations

Two RAFT agents, suitable for inducing living radical polymerization in water, have been synthesized. Both RAFT agents were shown to be effective over the temperature range 25–70 °C. One RAFT agent was functionalized with a pyridyl disulfide group. RAFT efficacy was demonstrated for the polymerizations of N‐isopropyl acrylamide (NIPAAM) and poly(ethylene oxide)‐acrylate (PEG‐A) in both water and acetonitrile. The kinetic data indicates that the pyridyl disulfide functionality is largely benign in free radical polymerizations, remaining intact for subsequent reaction with thiol groups. This result was confirmed by studying conventional radical polymerizations in the presence of hydroxyethyl pyridyl disulfide. The utility of the pyridyl disulfide functionality at the terminus of the polymers was demonstrated by synthesizing polymer‐BSA conjugates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7207–7224, 2008     

Reversible Addition Fragmentation Chain Transfer Polymerization of Isobutyl Methacrylate

Abstract

The reversible addition fragmentation chain transfer (RAFT) bulk polymerization of isobutyl methacrylate (i‐BMA) has been studied using 2‐cyanoprop‐2‐yl dithionaphthalate (CPDN) as RAFT agent in the presence of 2,2′‐azobisisobutyronitrile (AIBN). The results of polymerizations of i‐BMA show that i‐BMA can polymerize in a controlled way by RAFT polymerization using CPDN as RAFT agent; i.e., the polymerization rate is first order with respect to monomer concentration, molecular weight increases linearly with monomer conversion, and polydispersities are relatively low (PDI?<?1.2). The structure of the polymer was characterized by ¹H‐NMR. A chain‐extension experiment of the resulting polymer was successfully carried out. The influences of [i‐BMA]₀/[CPDN]₀/[AIBN]₀ molar ratio and reaction temperature were investigated.     

Visible light‐induced RAFT polymerization of methacrylates with benzaldehyde derivatives as organophotoredox catalysts

The benzaldehyde derivatives, such as 2,4‐dimethoxy benzaldehyde (PC1) and p‐anisaldehyde (PC2), were successfully used as photoredox catalysts (PCs) in combination with typical RAFT agent 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoic acid (CTP) for the controlled photoinduced electron transfer RAFT polymerization (PET‐RAFT) of methyl methacrylate (MMA) and benzyl methacrylate (BnMA) at room temperature. The kinetics of the polymerizations showed first order with respect to monomer conversions. Besides, the average number molecular weights (M_n) of the produced polymers increased linearly with the monomer conversions and kept relatively narrow polydispersity (PDI = M_w/M_n). For example, the M_n of PMMA increased from about 3400 to 17,300 g mol⁻¹ with the increasing in monomer conversion from 11% to 85%, and the PDI maintained around 1.36. The living features of polymerizations with the PC1 and PC2 as catalysts have also been further supported by chain extension and synthesis of PMMA‐b‐PBnMA diblock copolymer. As a result, the simplicity and efficiency of benzaldehyde derivatives catalyzed PET‐RAFT polymerization have been demonstrated under mild conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 229–236     

Controlled/living heterogeneous radical polymerization in supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) is an inexpensive and environmentally friendly medium for radical polymerizations. ScCO₂ is suited for heterogeneous controlled/living radical polymerizations (CLRPs), since the monomer, initiator, and control reagents (nitroxide, etc.) are soluble, but the polymer formed is insoluble beyond a critical degree of polymerization (J_crit). The precipitated polymer can continue growing in (only) the particle phase giving living polymer of controlled well‐defined microstructure. The addition of a colloidal stabilizer gives a dispersion polymerization with well‐defined colloidal particles being formed. In recent years, nitroxide‐mediated polymerization (NMP), atom transfer radical polymerization (ATRP), and reversible addition fragmentation chain transfer (RAFT) polymerization have all been conducted as heterogeneous polymerizations in scCO₂. This Highlight reviews this recent body of work, and describes the unique characteristics of scCO₂ that allows composite particle formation of unique morphology to be achieved. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3711–3728, 2009