Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

Structure analyses of dodecylated single-walled carbon nanotubes

Alkylation of nanotube salts prepared using either lithium, sodium, or potassium in liquid ammonia yields sidewall-functionalized nanotubes that are soluble in organic solvents. Atomic force microscopy and transmission electron microscopy studies of dodecylated SWNTs prepared from HiPco nanotubes and 1-iodododecane show that extensive debundling results from intercalation of the alkali metal into the SWNT ropes. TGA-FTIR analyses of samples prepared from the different metals revealed radically different thermal behavior during detachment of the dodecyl groups. The SWNTs prepared using lithium can be converted into the pristine SWNTs at 180-330 degrees C, whereas the dodecylated SWNTs prepared using sodium require a much higher temperature (380-530 degrees C) for dealkylation. SWNTs prepared using potassium behave differently, leading to detachment of the alkyl groups over the temperature range 180-500 degrees C. These differences can be observed by analysis of the solid-state 13C NMR spectra of the dodecylated SWNTs that have been prepared using the different alkali metals and may indicate differences in the relative amounts of 1,2- and 1,4-addition of the alkyl groups.     

Conformational studies of cyclopropylmethyl isocyanate from temperature dependent FT-IR spectra of xenon solutions and ab initio calculations

Variable temperature (−55 to −100 °C) studies of the infrared spectra (3200 to 100 cm⁻¹) of cyclopropylmethyl isocyanate, c-C₃H₅CH₂NCO, dissolved in liquefied xenon, have been carried out. The infrared spectra (gas and solid) as well as the Raman spectrum of the liquid have been recorded from 3200 to 100 cm⁻¹. By analyzing six conformer pairs in xenon solutions, an enthalpy difference of 193 ± 19 cm⁻¹ (2.31 ± 0.23 kJ/mol) was obtained with the gauche–cis rotamer (the first designation indicates the orientation of the CNCO group with respect to the three-membered ring, the second designation indicates the relative orientation of the NCO group with respect to the bridging CC bond) the more stable form and the only form present in polycrystalline solid. The abundance of the cis–trans conformer present at ambient temperature is 16 ± 1%. The potential function governing the conformational interchange has been obtained from B3LYP/6-31G(d) calculations and the two-dimensional potential has been obtained. From MP2 ab initio calculations utilizing various basis sets with diffuse functions, the gauche–cis conformer is predicted to be more stable by 223 to 269 cm⁻¹, which is consistent with the experimental results. However, without diffuse functions the predicted conformational energy differences are much smaller (77–166 cm⁻¹). Similar diffuse function dependency affects density functional theory calculations by the B3LYP method to a lesser extent. A complete vibrational assignment for the gauche–cis conformer is proposed and several fundamentals for the cis–trans conformer have been identified. The structural parameters, dipole moments, conformational stability, vibrational frequencies, infrared intensities and Raman activities have been predicted from ab initio calculations and r₀ structural parameters are estimated. These experimental and theoretical results are compared to the corresponding quantities of some similar molecules.     

Ammonia sorption by Dawson acid studied by IR spectroscopy and microbalance

Using in-situ microbalance and infrared spectroscopy techniques the double ammonia proton complexation was traced. The results confirm the formation of N₂H₇⁺ dimer in solid Dawson acid H₆P₂W₁₈O₆₂, previously reported only for N₂H₇I and for (N₂H₇)₄SiW₁₂O₄₀. The formation of such dimers was evidenced by the microbalance results, the molar ratio of ammonia to proton was measured as 2:1 at 10.7 kPa and 298 K. The formation of NH₄⁺ monomer (band at 1410 cm⁻¹) and N₂H₇⁺ dimer (1460 cm⁻¹) was revealed by IR spectroscopy. Enthalpy of ammonia sorption on Dawson structure was calculated to be −127.9 kJ mol⁻¹, indicating the lower acid strength of Dawson-type compared to that of the Keggin-type heteropolyacids, like H₄SiW₁₂O₄₀.     

A study of the Raman spectra of alkanes in the Fermi-resonance region

The experimental and theoretically predicted Raman spectra for the first few alkanes in the homologous series: methane, ethane, propane and butane are presented for the region 2700–3100 cm⁻¹. The structure of the spectra is rather complex. Analysis of the results obtained shows that Fermi resonance occurs between the CH stretching vibrations in the 3000 cm⁻¹ region and the 2ν overtones of deformation vibrations in the low frequency (1450–1500 cm⁻¹) region.     

Infrared and Raman spectra, conformational stability, ab initio calculations, and vibrational assignments for methylaminothiophosphoryl difluoride

Infrared spectra (4000–50 cm⁻¹) of the vapor, amorphous and crystalline solids and Raman spectra (3600–10 cm⁻¹) of the liquid with qualitative depolarization data as well as the amorphous and crystalline solids of methylaminothiophosphoryl difluoride, CH₃N(H)P(=S)F₂, and three deuterated species, CD₃N(H)P(=S)F₂, CH₃N(D)P(=S)F₂, and CD₃N(D)P(=S)F₂, have been recorded. The spectra indicate that in the vapor, liquid and amorphous solid a small amount of a second conformer is present, whereas only one conformer remains in the low temperature crystalline phase. The near-infrared spectra of the vapor confirms the existence of two conformers in the gas phase. Asymmetric top contour simulation of the vapor shows that the trans conformer is the predominant vapor phase conformer. From a temperature study of the Raman spectrum of the liquid the enthalpy difference between the trans and near-cis conformers was determined to be 368±15 cm⁻¹ (4.41±0.2 kJ/mol), with the trans conformer being thermodynamically preferred. Ab Initio calculations with structure optimization using the 6-31G(d) and 6-311+G(d,p) basis sets at the restricted Hartree–Fock (RHF) and/or with full electron correlation by the perturbation method to second order (MP2) support the occurrence of near-trans (5° from trans) and near-cis (20° from cis) conformers. From the RHF/6-31G(d) calculation the near-trans conformer is predicted to be the more stable form by 451 cm⁻¹ (5.35 kJ/mol) and from the MP2/6-311+G(d,p) calculation by 387 cm⁻¹ (4.63 kJ/mol). All of the normal modes of the near-trans rotamer have been assigned based on infrared band contours, depolarization values and group frequencies and the assignment is supported by the normal coordinate calculation utilizing harmonic force constants from the MP2/6-31G(d) ab initio calculations.     

Semi-quantitative trace analysis of nuclear fast red by surface enhanced resonance Raman scattering

The dye nuclear fast red has been detected and determined semi-quantitatively by means of surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS), using laser exciting wavelengths of 514.5 and 632.8 nm, respectively, by employing a citrate-reduced silver colloid. A good linear correlation is observed for the dependence of the intensities of the SERRS bands at 989 cm⁻¹ (R=0.9897) and 1278 cm⁻¹ (R=0.9872) on dye concentration over the range 10⁻⁹ to 10⁻⁷ M, when using an exciting wavelength of 514.5 nm. At dye concentrations above 10⁻⁷ M, the concentration dependence of the SERRS signals is non-linear. This is almost certainly due to the coverage of the colloidal silver particles being in excess of a full monolayer of the dye. A linear correlation is also observed for the dependence of the intensities of the SERS bands at 989 cm⁻¹ (R=0.9739) and 1278 cm⁻¹ (R=0.9838) on the dye concentration over the range 10⁻⁸ to 10⁻⁶ M when using an exciting wavelength of 632.8 nm. Strong fluorescence prevented collection of resonance Raman scattering (RRS) spectra from powdered samples or aqueous solutions of the dye using an exciting wavelength of 514.5 nm, but weak bands were observed in the spectra obtained from both powdered and aqueous samples of the dye using an exciting wavelength of 632.8 nm. A study of the pH dependence of SERRS/SERS and UV–VIS absorption spectra revealed the presence of different ionisation states of the dye. The limits of detection for nuclear fast red by SERRS (514.5 nm), SERS (632.8 nm) and visible spectroscopy (535 nm) are 9, 89 and 1000 ng ml⁻¹, respectively.     

Aluminum and lithium octa(pentoxy)phthalocyanine radicals

A lithium phthalocyanine radical and the analogous aluminum phthalocyanine radical were synthesized as part of an investigation of isostructural dopants. An improved synthesis of the free base of octa(pentoxy)phthalocyanine (H₂Pc*) involves the reduction of 1,2-dicyano-4,5-dipentoxybenzene with hydroquinone. Deprotonation with lithium bis(trimethylsilyl)amide leads to the dilithium derivative Li₂Pc* and subsequent oxidation with ferrocenium yields the radical LiPc*. Treatment of H₂Pc* with Et₂AlCl gives ClAlPc* and reduction with sodium amalgam yields AlPc*, the first reported aluminum phthalocyanine radical. In the solid state LiPc* and AlPc* are electrical conductors with pressed-pellet conductivities of 8 × 10⁻¹¹ Ω⁻¹ cm⁻¹ and 5 × 10⁻⁷ Ω⁻¹ cm⁻¹, respectively.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Intramolecular hydrogen bonding. Spectroscopic and theoretical studies of vibrational transitions in dibenzoylmethane enol

The vibrational structure of the title compound (DBM) was investigated by FTIR spectroscopy in liquid solutions, by FTIR linear dichroism (LD) measurements, and by Raman spectroscopy. The results were supported by the application of theoretical model calculations and analyzed with particular attention to the possible origin of the broad, very strong, and irregularly shaped absorbance band observed in the 1700–1400 cm⁻¹ region. The orientation factors derived from the observed LD data indicate that rotational dynamics of the phenyl groups do not contribute significantly to the broadening of the band. The position of the two sharp Evans transmission windows near 1580 and 1500 cm⁻¹ is unaffected by deuteration of the reactive protons in DBM. The transmissions coincide with prominent peaks in the Raman spectrum and can be assigned to combinations of phenylic modes (9a, 18a) with low IR intensity, but large Raman scattering activity.     

Thermal dehydration in lithium croconate dihydrate (Li2C5O5·2H2O) studied by vibrational and thermoanalytical techniques

This work reports the thermal dehydration of the oxocarbonic salt Li₂C₅O₅·2H₂O studied by IR and Raman spectroscopy, by ex situ and in situ techniques. The loss of the crystallization water is not only reflected by the disappearing of the pertinent bands, but also by the change in the crystalline phase, as evidenced by the alteration in the splitting pattern of the oxocarbon modes and by differential scanning calorimetry. In the anhydrous salt spectra, a great number of overtones and combination bands appear in the 2000–4000 cm⁻¹ region, indicating an increased anharmonicity. The enhanced splitting suggests that the anhydrous phase belongs to a less symmetric unit cell. The tetrahedral environment around the lithium ion is preserved, as suggested by the shifts of some modes in the 300–600 cm⁻¹ region on isotopic substitution from ⁷Li to ⁶Li. Raman and thermoanalytical data seem to indicate that the crystallization water is released in a single-step process.     

Collective dynamics of sub- and supercritical methanol by inelastic X-ray scattering

Inelastic X-ray scattering experiments have been performed on methanol as a function of density from ambient to the supercritical state. Positive dispersion of the sound velocity, as compared to the hydrodynamic values, is 50% in the ambient condition and decreases to zero at 0.50 g cm⁻³ over the momentum transfer Q = 1–10 nm⁻¹ with lowering density; however, it increases again with a further decrease in density down to 0.20 g cm⁻³in the supercritical state only in the Q-range above 5 nm⁻¹. These results have been interpreted as the formation of small oligomers in the low-density supercritical methanol.     

Metal–metal bonding in metal–string complexes M3(dpa)4X2 (M = Ni, Co, dpa = di(2-pyridyl)amido, and X = Cl, NCS) from resonance Raman and infrared spectroscopy

Infrared and Raman spectra for metal–string complexes M₃(dpa)₄X₂ (M = Ni, Co, dpa = di(2-pyridyl)amido, and X = Cl, NCS) are studied. We assign the Ni₃ asymmetric stretching vibration to infrared lines at 304 and 311 cm⁻¹ for Ni₃(dpa)₂Cl₂ and Ni₃(dpa)₂(NCS)₂, respectively. A Raman shift at 242 cm⁻¹ is assigned to the Ni₃ symmetric stretching mode. For Co₃ complexes a line for the Co₃ asymmetric stretching mode appears at 313 and 331 cm⁻¹ for Co₃(dpa)₂Cl₂ and Co₃(dpa)₂(NCS)₂, respectively.     

A study on the formation mechanism of graphite fluorides by Raman spectroscopy

Raman spectra were measured of highly fluorinated graphite samples prepared at room temperature, 380 and 515 °C. C_xF prepared at room temperature showed a novel downshifted band at 1555–1542 cm⁻¹ along with G band at 1593–1583 cm⁻¹. Similar behavior is also observed for samples prepared at 380 and 515 °C at early stages of fluorination, after which the Raman shifts completely disappeared. Raman spectra as well as X-ray diffraction (XRD) analysis suggest that graphite fluorides, (CF)_n and (C₂F)_n are formed via fluorine-intercalated phase with planar graphene layers.     

Matrix-isolation spectroscopy of Pb2

Fluorescence and Raman scattering were observed from Pb₂ isolated in neon and argon matrices. Two new excited states were observed by two-photon stepwise excitations, which involve low-lying electronic states of Pb₂. Most spectroscopic constants of the states observed could be given and complement previous results. Two resonance Raman progressions with ω_c = 112.5 and 123.1 cm⁻¹ and a single Raman signal at 80 cm⁻¹ were observed in argon matrices. The ω_c = 123.1 cm⁻¹ Raman signal which had recently been assigned to a larger Pb cluster was shown to arise from Raman scattering within the electronically excited A state of Pb₂ at 5500 cm⁻¹.     

Substituted propanes : Part XIV. The low frequency vibrations of 1,3-dichloro-, 1,3-dibromo-, 1,2,3-trichloro- and 1,2,3-tribromopropane

The far-IR and Raman spectra of 1,3-dichloro-, 1,3-dibromo-, 1,2,3-trichloro- and 1,2,3-tribromopropane were reinvestigated in solution and in the liquid state in the region 300-30 cm⁻¹. Additional IR and Raman bands were observed, revealing that the compounds had fundamentals below 80 cm⁻¹ attributed to torsional modes. Earlier discrepancies between the torsional modes predicted from electron diffraction measurements and spectral data have been removed.     

Quantum chemical determination of molecular geometries and interpretation of FTIR and Raman spectra for 2,3,4-and 2,3,6-tri-fluoro-benzonitriles

Raman and FTIR spectra for 2,3,4- and 2,3,6-tri-fluoro-benzonitriles have been recorded in the regions 50–4000 cm⁻¹ and 400–4000 cm⁻¹, respectively. Measurement of depolarization ratios for the Raman lines has also been made. Optimized geometrical parameters, charge distributions and vibrational wavenumbers were calculated using ab initio quantum chemical method. Normal coordinate analysis has also been carried out to help assign the fundamentals of these molecules. Each vibration has been assigned using observed wavenumbers in the IR and Raman spectra and their relative intensities, depolarization ratios of the Raman lines, the calculated frequencies, vector displacements and potential energy distributions (PEDs).     

Raman and infrared spectra, conformational stability, ab initio calculations and vibrational assignments for 2-chloroethyl silane

The infrared (3500–30 cm⁻¹) spectra of gaseous and solid and the Raman (3500–10 cm⁻¹) spectra of liquid with quantitative depolarization ratios and solid 2-chloroethyl silane, ClCH₂CH₂SiH₃, have been recorded. Similar data have been recorded for the Si–d₃ isotopomer. These data indicate that two conformers, trans and gauche, are present in the fluid states but only one conformer, trans, is present in the solid. The mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (−55 to −100°C) has been recorded. The enthalpy difference between the conformers has been determined to be 181±12 cm⁻¹ (2.17±0.14 kJ/mol) with the trans rotamer the more stable form. From the isolated Si–H frequencies from the Si–d₂ isotopomer the r_o Si–H distances of 1.484 and 1.483 Å for the trans and 1.481 for the gauche conformers have been obtained. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G** from which structural parameters and conformational stabilities have been determined. With all the basis sets the trans form is predicted to be the more stable conformer which is consistent with the experimental results. These results are compared to the corresponding quantities for the carbon analogue.     

Conformational stability of 1-bromo-2-fluoroethane from temperature dependent FT-IR spectra of rare gas solutions

Variable temperature (−55 to −135°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-bromo-2-fluoroethane, BrCH₂CH₂F, dissolved in liquid krypton and xenon have been recorded. From these data, the enthalpy difference has been determined to be 108±9 cm⁻¹ (1.296±0.113 kJ/mol) and 112±8 cm⁻¹ (1.346±0.098 kJ/mol) from the krypton and xenon solutions, respectively, with the trans conformer the more stable rotamer. Complete vibrational assignments are presented for both conformers which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G^* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G^* and/or MP2/6-31G^* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate. Structural parameters and conformational stability have also been obtained from MP2/6-311+G^** calculations. Combining the ab initio predicted structural parameters with the microwave rotational constants, r_o parameters have been obtained for the gauche conformer.     

Conformational stabilities of dimethylmethoxyphosphine and dimethyl(methylthio)phosphine from temperature dependent infrared spectra of rare gas solutions

Variable temperature (−55 to −150°C) studies of the infrared spectra (3500 to 400 cm⁻¹) of dimethylmethoxyphosphine, (CH₃)₂POCH₃ and dimethyl(methylthio)phosphine, (CH₃)₂PSCH₃ dissolved in liquid krypton and/or xenon have been recorded. From these data, the enthalpy differences have been determined to be 393±50 cm⁻¹ (4.71±0.60 kJ/mol), for (CH₃)₂POCH₃ with the near-cis conformer the more stable rotamer and 80±10cm⁻¹ (0.96±0.12 kJ/mol) for (CH₃)₂PSCH₃ with the cis conformer the more stable form. Complete vibrational assignments are presented for both molecules, which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G(d) calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G(d) and/or MP2/6-31G(d) ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with some corresponding results for some similar molecules.