Hydroborierung von 3-methyl-1,3-butadien mit 1,2:1,2-bis(tetramethylen)diboran(6)

The nature of the hydroboration product obtained from 3-methyl-1,3-butadiene and 1,2 : 1,2-bis(tetramethylene)diborane(6) (1) allows for the discussion of the reaction mechanism. The hydroboration proceedsby retention of the cyclic structure in the first step, followed by exchange of BH and BC bonds and final cyclic hydroboration to give 1-(boracyclopentyl)-4-(3-methylboracyclopentyl)butane (5). The structural assignment of 5 is based on ¹H, ¹¹B and ¹³C NMR data.     

Olefin‐Directed Palladium‐Catalyzed Regio‐ and Stereoselective Hydroboration of Allenes

An olefin‐directed palladium‐catalyzed regio‐ and stereoselective hydroboration of allenes has been developed to afford fully substituted alkenylboron compounds. The reaction showed a broad substrate scope: a number of functionalized allenes, including 2,3‐dienoate, 3,4‐dienoate, 3,4‐dienol, 1,2‐allenylphosphonate, and alkyl‐substituted allenes, could be used in this olefin‐directed allene hydroboration. The olefin unit was proven to be an indispensable element for this transformation.     

The Reaction of Trialkylboranes with Allyl Phenyl Ether. Syntheses of 1-Alkenes and 1,5-Alkadienes

In the organoborane chemistry, the homologation reaction is one of the useful methods for the synthesis of organoboranes not available via hydroboration.¹⁾ The allylic boranes are known to be highly reactive and exhibit specific behaviors,²⁾ but with few exceptions,³) these are difficult to be prepared directly by the hydroboration reaction.⁵⁾ Previously, we reported that in the reaction of the dianion of phenoxyacetic acid with organoborane, the phenoxy group acts as a good leaving group.⁶⁾ This result suggested us a new homologation reaction converting a saturated organoborane to a allylic borane (1) by the treatment with the carbanion of allyl phenyl ether. Here we wish to report the synthesis of 1-alkenes (II) three-carbon-homologated from starting alkenes⁷⁾ and the regioselective synthesis of 1,5-dienes (III) using allylic borane intermediates (1) (eq. 1).     

Palladium-catalyzed cross-coupling of α-bromocarbonyls and allylic alcohols for the synthesis of α-aryl dicarbonyl compounds

The palladium-catalyzed coupling of olefins and organohalides is a versatile approach for synthesizing complex molecules from simple starting materials. We have developed a palladium-catalyzed coupling of α-bromocarbonyl compounds with allylic alcohols for the generation of acyclic aryl-substituted dicarbonyl compounds. The reaction proceeds via a tandem olefin insertion of an α-acyl radical followed by a 1,2-aryl migration. In addition to providing preliminary evidence for a free radical mediated mechanism, we demonstrate unprecedented levels of 1,3-stereoinduction for the 1,2-migration step.     

The transition metal catalyzed hydroboration of enamines

The addition of catecholborane (HBcat, cat = 1,2-O₂C₆H₄) to 9-vinylcarbazole can give either the branched or linear hydroboration product depending upon the judicious choice of metal catalyst used in these reactions. Analogous reactions with pinacolborane (HBpin, pin = 1,2-O₂C₂Me₄) and HBBzpin (Bzpin = 1,2-O₂C₂Ph₄) using catalytic amounts (5 mol%) of either Rh(acac)(dppb) or [Cp^∗IrCl₂]₂ gave the linear hydroboration product selectively. Hydroborations of 1-pyrrolidino-1-cyclopentene and 1-pyrrolidino-1-cyclohexene were complicated by a competing dehydrogenative borylation pathway. The branched isomer was not observed to any significant extent in these reactions, suggesting that the directing effect of the nitrogen atom is negligible. Although catalyzed additions of HBcat to 1-vinyl-2-pyrrolidinone gave complicated product distributions arising from competing reactions, addition of HBpin effectively generated the corresponding linear hydroboration product in good yields.     

Doubly hydrogen-bridged 1,2-diphenylenediboranes derived from 9-chloro-9-borafluorene and ligand exchange reactions

Cyclic 1,2-diphenylenediboranes containing a doubly hydrogen-bridged structure, including 1,2-(2,2^′biphenylylene)diborane(I) and 1,2-(2,2^′biphenylylene)-1,2-diethyldiborane (II), are conveniently prepared by treating 9-chloro-9-borafluorene with NaBH₄ and Na(Et)₃BH, respectively. The reaction mechanism involves an initial Cl-H exchange to form 9-borafluorene containing a reactive 5-member ring diarylborane moiety, which subsequently engages in a facile ring expansion with the in situ formed B-H containing residue (BH₃ or HBEt₂) to result in cyclic 1,2-diphenylenediboranes compounds. The doubly hydrogen-bridged structure shows good thermal stability up to 50 °C. Upon thermal cleavage at higher temperature, all free B-H groups become very reactive involving hydroboration with α-olefin. The complexization study also reveals that this intradiborane moiety forms a 1:2 complex with a strong base, such as pyridine.     

Synthesis of α,β-Unsaturated Ketones via Enamines

Acylation of an enamine followed by acid hydrolysis constitutes the well-known Stork's reaction of synthesizing β-diketones.^1,2 This article reports that the acylated enamine 1 which corresponds to monoenamine of a β-diketone can be hydrogenated to a Mannich base 2 which on elimination by heating or treatment with acid yields the α, β-unsaturated ketone 3; further hydrogenation gives saturated ketone 4 in good yield (Scheme 1). A similar transformation effected by hydroboration has been reported by Montury and Góre.     

Étude de la réactivité des radicaux α-ester : influence des centres stéréogènes en position α’ et β’

The formation of 2-syn and 2-anti addition products, between a 1-E olefin and an acyclic radical is under kinetic control, although addition of n-Bu₃Sn^• to the 1-Z leads to 1-E olefin. Hydride capture is often independent of the nature of the radical, but the difference of behaviour between A^• and B^• radicals results from their stability, induced by the existing chiral centres present in the molecule. Capture of the intermediate radical in α of the ester by deuterium occurs with a diastereomeric excess, varying between 30 and 78%, depending on the nature of the centres situated in α’ and β’ positions.     

Regioselective Rhodium-Catalyzed 1,2-Hydroboration of Pyridines and Quinolines Enabled by the Tris(8-quinolinyl)phosphite Ligand**

A Rh(I) complex [κ²(P,N)-{P(Oquin)₃}RhCl(PPh₃)] ( 1 ) bearing the P,N ligand tris(8-quinolinyl)phosphite, P(Oquin)₃, has been synthesized and structurally characterized. The molecular structure of complex 1 shows that P(Oquin)₃ acts as a bidentate P,N chelate ligand. Reactivity studies of 1 reveal that the triphenylphosphine ligand can be replaced by Pcy₃ or removed upon oxidation with concomitant coordination of a second 8-quinolyl unit of P(Oquin)₃. In addition, the Rh(III) complex [RhCl₂{OP(Oquin)₂}] ( 3 ), resulting from treating 1 with either wet CDCl₃ or, sequentially, with HCl and water, was identified by X-ray diffraction analysis. Complex 1 catalyzes the 1,2-regioselective hydroboration of pyridines and quinolines, affording N-boryl-1,2-dihydropyridines (1,2-BDHP) and N-boryl-1,2-hydroquinolines (1,2-BDHQ) in high yield (up to >95 %) with turnover numbers (TONs) of up to 130. The system tolerates a variety of substrates of different electronic and steric nature. In comparison with other transition-metal-based hydroboration catalysts, this system is efficient at a low catalyst loading without the requirement of base or other additives.     

Narrowly distributed homotelechelic polymers in 30 minutes: Using fast in situ pre‐functionalized ROMP initiators

Today's olefin metathesis catalysts show high reactivity, selectivity, and functional group tolerance, and allow the design of new syntheses of precisely functionalized polymers. Here we describe a general “one‐pot” synthesis for narrow polydispersity bis‐end‐functional (=homotelechelic) ROMP polymers exploiting the propagating ruthenium complex inherent selectivity for strained norbornenes over acyclic internal olefins. This approach represents a straightforward general method of homotelechelic polymers carrying almost any functional end group (within the limitations of the catalyst's functionality tolerance). Complete pre‐functionalization of the initiator is realized in situ within minutes and without the need of further purification steps. The excess acyclic olefin re‐enters the catalytic cycle after monomer consumption is complete giving a homotelechelic polymer. ¹H NMR spectroscopic and MALDI‐ToF‐MS analysis show highly efficient end group functionalization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4183–4190     

One-pot synthesis of polycyclic heterocyclic compounds by condensation of 1-carbamoylmethyl-2,3,3-trimethyl-3H-indolium salts with pyridine-2, 3, and 4- and quinoline-4-carboxaldehydes

A one-pot synthesis of new polycyclic heterocyclic compounds was carried out via the condensation of 1-carbamoylmethyl-2,3,3-trimethyl-3H-indolium chloride with pyridine- and quinolinecarboxaldehydes. The heating of the aforementioned 3H-indolium salts with 1 eq. of pyridine-2, 3, and 4- or quinoline-4-carboxaldehyde in ethanol in the presence of piperidine as a catalyst provided 9a-[2-(pyridyl)ethenyl]- or 9a-[2-(quinolyl)ethenyl]-9,9a-dihydro-1H-imidazo[1,2-a]indol-2(3H)-one derivatives as the main products. However, reaction outcome was dramatically different for the analogous reactions in acetic acid. In this case, the heating of the chloride with 2 eq. of pyridine-2-carboxaldehyde afforded derivatives of 9a-[3-(pyridin-2-yl)indolizin-2-yl]-9,9a-dihydro-1H-imidazo[1,2-a]indol-2(3H)-one as the major product, while the use of 2 eq. of pyridine-3 and 4- or quinoline-4-carboxaldehyde led to the formation 2-heteroaryl-1-heteroarylmethyl-9H-pyrrolo[1,2-a]indole-3-carboxamides. Plausible pathways for the cyclization reactions are discussed. The structural assignments were based on ¹H, ¹³C and ¹⁵N NMR spectroscopy, HRMS and single-crystal X-ray diffraction data.     

Kinetics and mechanism of hydroboration of oct-1-and-4-ene by dimeric dialkylboranes

The kinetics and mechanism of hydroboration of oct-1-and-4-ene with a series of dimeric dialkylboranes was investigated. The kinetic results showed that the hydroboration of terminal olefins proceeds via a three-halves-order mechanism, first-order with respect to the olefin and one-half-order with respect to the dimer. Using dicyclohexylborane, diisopinocamphenylborane, and 3,6-dimethylborepane the observed rate constants for the hydroboration of oct-4-ene were approximately 6 times smaller than those for oct-1-ene. Supporting computations showed that both steric and electronic effects influence the rate of hydroboration of both internal and terminal olefins. A model computational study of the isomerization of oct-4-ene with di(prop-2-yl)borane showed that formation of the terminal hydroborated complex is thermodynamically favored over the internal complex.     

Reactions of a,ß‐unsaturated N‐benzenesulfonyl Imine – N‐[(2E)‐3‐phenyl‐2‐propen‐1‐ylidene]benzenesulfonamide with Methyllithium

α,β‐Unsaturated N‐benzenesulfonyl imine 1 was treated with 1.1 eq methyllithium to afford 1,2‐addition adduct as a sole product. However, when compound 1 was treated with 2 eq MeLi, 1,2‐addition product, benzenesulfonamide derivative 3 and 2H‐1,2‐benzothiazine 1,1‐dioxide derivatives 4 and 5 were isolated.     

Synthesis,structure, and characteristics of 1,2-dichlorovinyl alkyl ketones

A method of alkyl 1,2-dichlorovinyl ketones preparation from acyl halides and 1,2-dichloroethylene was developed. The configurational equilibrium and electronic structure of alkyl 1,2-dichlorovinyl ketones was investigated by IR, ¹H and ¹³C NMR spectroscopy, by measuring dipole moments, and by quantum-chemical calculations using methods RHF and B3LYP in the basis 6–311++G (d,p). Alkyl 1,2-dichlorovinyl ketones are stable in the Z, s-cis-configuration where the olefin proton is involved into an intramolecular hydrogen bond with the oxygen of the carbonyl group. Reaction of 1,2-dichlorovinyl ketones with alkylhydrazines afforded 1-alkyl-3-alkyl-4-chloropyrazoles. The reaction of alkyl 1,2-dichlorovinyl ketones with 1,1-dimethylhydrazine involved dehydrochlorination and afforded 1,1-dimethylhydrazinium hydrochloride and a mixture of compounds with uncertain structure.Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 11, 2004, pp. 1632–1640.Original Russian Text Copyright © 2004 by Bozhenkov, Leckovskaya, Larina, Ushakov, Dolgushin, Mirskova.     

Organoboranes—34 : General synthesis of chiral boronic and borinic esters via asymmetric hydroboration-displacement. carbenoidation of chiral borinic esters to acyclic ketones of high enantiomeric purities

Asymmetric hydroboration of appropriate alkenes with diisopinocampheylborane (Ipc₂BH) or monoisopinocampheylborane (IpcBH₂) produces intermediates that readily eliminate α-pinene on treat- ment with acetaldehyde, providing a direct, convenient route to chiral boronic esters of high enantiomeric purities. Mixed chiral trialkylboranes, readily prepared by stepwise hydroboration of appropriate alkenes with IpcBH₂, eliminate α-pinene on treatment with acetaldehyde under very mild conditions. The procedure makes readily available chiral borinic esters of high enantiomeric purities. The synthetic utility of chiral borinic esters is demonstrated by converting them into acyclic ketones including an alarm pheromone of the ant Monica mutica.     

Novel synthesis of 1α,25-dihydroxy-19-norvitamin D from 25-hydroxyvitamin D

19-Norvitamin D analogs 3a and 3b were synthesized from 25-hydroxyvitamin D, obtained via a bioconversion method. The synthetic route features a highly regio- and stereoselective hydroboration reaction to afford 25-hydroxy-3,5-cyclopropyl-vitamin D derivatives 12 having olefin at the C1-10-position.     

Iron-catalyzed stereospecific activation of olefinic C-H bonds with Grignard reagent for synthesis of substituted olefins

The reaction of an aryl Grignard reagent with a cyclic or acyclic olefin possessing a directing group such as pyridine or imine results in the stereospecific substitution of the olefinic C-H bond syn to the directing group. The reaction takes place smoothly and without isomerization of the product olefin in the presence of a mild oxidant (1,2-dichloro-2-methylpropane) and an aromatic cosolvent. Several lines of evidence suggest that the reaction proceeds via iron-catalyzed olefinic C-H bond activation rather than an oxidative Mizoroki-Heck-type reaction.     

An analysis of the diastereomeric transition state interactions for stereoselective epoxidation of acyclic allylic alcohols with peroxy-acids

Consideration of the magnitude of A^(1,2) and A^(1,3) -strain in the transition state of the epoxidation of acyclic allylic alcohols, has powerful predictive value.     

Synthesis of Cyclic Amine Boranes through Triazole‐Gold(I)‐Catalyzed Alkyne Hydroboration

The first catalytic alkyne hydroboration of propargyl amine boranecarbonitriles is accomplished with triazole‐Au^I complexes. While the typical [L‐Au]⁺ species decomposes within minutes upon addition of amine boranecarbonitriles, the triazole‐modified gold catalysts (TA‐Au) remained active, and allowed the synthesis of 1,2‐BN‐cyclopentenes in one step with good to excellent yields. With good substrate tolerability and mild reaction conditions (open‐flask), this new method provides an alternative route to reach the interesting cyclic amine borane with high efficiency.     

Synthesis of 1‐silacyclopent‐2‐ene derivatives using 1,2‐hydroboration, 1,1‐organoboration and protodeborylation

The reaction of di(alkyn‐1‐yl)vinylsilanes R¹(H₂C═CH)Si(C≡C―R)₂ (R¹ = Me ( 1 ), Ph ( 2 ); R = Bu (a), Ph (b), Me₂HSi (c)) at 25°C with 1 equiv. of 9‐borabicyclo[3.3.1]nonane (9‐BBN) affords 1‐silacyclopent‐2‐ene derivatives ( 3a , 3b , 3c , 4a , 4b ), bearing one Si―C≡C―R function readily available for further transformations. These compounds are formed by consecutive 1,2‐hydroboration followed by intramolecular 1,1‐carboboration. Treated with a further equivalent of 9‐BBN in benzene they are converted at relatively high temperature (80–100°C) into 1‐alkenyl‐1‐silacyclopent‐2‐ene derivatives ( 5a , 5b 6a , 6b ) as a result of 1,2‐hydroboration of the Si―C≡C―R function. Protodeborylation of the 9‐BBN‐substituted 1‐silacyclopent‐2‐ene derivatives 3 , 4 , 5 , 6 , using acetic acid in excess, proceeds smoothly to give the novel 1‐silacyclopent‐2‐ene ( 7 , 8 , 9 , 10 ). The solution‐state structural assignment of all new compounds, i.e. di(alkyn‐1‐yl)vinylsilanes and 1‐silacyclopent‐2‐ene derivatives, was carried out using multinuclear magnetic resonance techniques (¹H, ¹³C, ¹¹B, ²⁹Si NMR). The gas phase structures of some examples were calculated and optimized by density functional theory methods (B3LYP/6‐311+G/(d,p) level of theory), and ²⁹Si NMR parameters were calculated (chemical shifts δ²⁹Si and coupling constants ⁿJ(²⁹Si,¹³C)). Copyright © 2014 John Wiley & Sons, Ltd.