Cation control of pore and channel size in cage-based metal-organic porous materials

Porous materials resembling zeolites that are composed of organic and inorganic building units were synthesized and characterized. Control of pore and channel size was achieved by using different-sized cations. The metal-assembled, anionic cage molecule, Co(4)1(2)(8-), with a hydrophobic cavity and four carboxylate rich arms, was used as a structural unit for the formation of materials with pores and channels. When assembled into a solid material with dications (Mg(2+), Ca(2+), Sr(2+), and Ba(2+)), Co(4)1(2)(8-) arranges into sheets of cages linked together by cations. The series of materials based on Co(4)1(2)(8-) and containing alkaline earth cations was characterized using X-ray crystallography. The magnesium material packs with cages close together, has small channels, and has cation-carboxylate linkages in three dimensions. The calcium material has cages packed with voids between them and has 5 x 10 A channels and 10 x 21 A pores. The strontium and barium materials also pack with voids between the cages and similarly to each other. They have 11 x 13 A and 11 x 11 A channels and 10 x 27 A and 9 x 27 A pores, respectively. Each of these materials has many (20-50) solvent water molecules associated with each cage. The associated water can be removed from and adsorbed by the materials. The heat of water binding has been measured to be -52 kJ/mol (Mg(4)Co(4)1(2)); -47 kJ/mol (Ca(4)Co(4)1(2)); -48 kJ/mol (Sr(4)Co(4)1(2)); -49 kJ/mol (Ba(4)Co(4)1(2)).     

Borazine materials for organic optoelectronic applications

Borazine materials have been demonstrated to be a new class of multifunctional and thermally stable materials with high electron (10(-3) cm2 V(-1) s(-1)) and moderate hole (10(-4) cm2 V(-1) s(-1)) mobilities for applications in electroluminescent devices.     

Novel multifunctional organic semiconductor materials based on 4,8-substituted 1,5-naphthyridine: synthesis, single crystal structures, opto-electrical properties and quantum chemistry calculation

A series of 4,8-substituted 1,5-naphthyridines (1a-1h) have been successfully synthesised by a Suzuki cross-coupling between 4,8-dibromo-1,5-naphthyridine (4) and the corresponding boronic acids (2a-2h) in the presence of catalytic palladium acetate in yields of 41.4-75.8% and have ben well characterized. They are thermally robust with high phase transition temperatures (above 186 °C). Compounds 1b, 1e and 1f crystallized in the monoclinic crystal system with the space groups P2(1)/c, P2(1)/c and P2(1)/n, respectively. All of them show the lowest energy absorption bands (λ(max)(Abs): 294-320 nm), revealing low optical band gaps (2.77-3.79 eV). These materials emit blue fluorescence with λ(max)(Em) ranging from 434-521 nm in dilute solution in dichloromethane and 400-501 nm in the solid state. 4,8-Substituted 1,5-naphthyridines 1a-1h have estimated electron affinities (EA) of (2.38-2.72 eV) suitable for electron-transport materials and ionization potentials (IP) of 4.85-5.04 eV facilitate excellent hole-injecting/hole-transport materials properties. Quantum chemical calculations using DFT B3LYP/6-31G* showed nearly identical the lowest unoccupied molecular orbitals (LUMO) of -2.39 to -2.19 eV and the highest occupied molecular orbitals (HOMO) of -5.33 to -6.84 eV. These results demonstrate the 4,8-substituted 1,5-naphthyridines 1a-1h with a simple architecture might be promising blue-emitting (or blue-green-emitting) materials, electron-transport materials and hole-injecting/hole-transport materials for applications for developing high-efficiency OLEDs.     

基于三苯胺/二苯砜的热激活延迟荧光材料

通过Suzuki反应合成了三种基于三苯胺/二苯砜的热激活延迟荧光(TADF)材料(1-3),采用紫外-可见(UV-Vis)吸收光谱、时间分辨荧光发射光谱、循环伏安(CV)测试、理论计算、热重分析和差示扫描量热法,系统地研究了三种材料的光物理、电化学、延迟荧光性能和热稳定性.材料1-3均为基于分子内电荷转移(ICT)的双极性分子.三种材料在薄膜中的单线态-三线态能级差分别为0.46、0.39和0.29 eV.荧光量子效率和荧光寿命的测试结果表明,三种材料均能发射延迟荧光,其中材料3具有最佳的延迟荧光性能.材料1-3的最高占有分子轨道(HOMO)能级分别为-4.91、-4.89和-4.89 eV.结合UV-Vis吸收光谱中得到的能隙(E_g)值,我们得到材料1-3的最低未占分子轨道(LUMO)能级,分别为-1.74、-1.89和-1.94 eV.热分析的结果表明,材料1-3具有其较高的热分解温度(T_d,失重5%时的温度),分别为436、387和310 ℃.     

Measurement of electroosmotic flow in plastic imprinted microfluid devices and the effect of protein adsorption on flow rate.

Several commercially available plastic materials were used as substrates in the fabrication of microfluid channels for biochemical analysis. Protocols for fabrication using the wire-imprinting method are reported for polystyrene, polymethylmethacrylate and a copolyester material. Channel sealing was accomplished by low-temperature bonding of a substrate of similar material; therefore, each channel was composed of a single material on all sides. The electroosmotic flow in 25-microm imprinted channels was evaluated for each substrate material. The copolyester material exhibited the highest electroosmotic flow mobility of 4.3 x 10(-4) cm2 V(-1) s(-1) which is similar to that previously reported for fused-silica capillaries. Polystyrene exhibited the lowest electroosmotic flow mobility of 1.8 x 10(-4) cm2 V(-1) s(-1). Plots of linear velocity versus applied electric field strength were linear from 100 V cm(-1) to 500 V cm(-1) indicating that heat dissipation is effective for all substrates in this range. Electroosmotic flow was reevaluated in the plastic channels following incubation in antibody solution to access the non-specific binding characteristics of a common biochemical reagent onto the substrate materials. All materials tested showed a high degree of non-specific adsorption of IgG as indicated by a decrease in the electroosmotic flow mobility in post-incubation testing.     

Tuning orbital energetics in arylene diimide semiconductors. materials design for ambient stability of n-type charge transport

Structural and electronic criteria for ambient stability in n-type organic materials for organic field-effect transistors (OFETs) are investigated by systematically varying LUMO energetics and molecular substituents of arylene diimide-based materials. Six OFETs on n+-Si/SiO2 substrates exhibit OFET response parameters as follows: N,N'-bis(n-octyl)perylene-3,4:9,10-bis(dicarboximide) (PDI-8): mu = 0.32 cm2 V(-1) s(-1), Vth = 55 V, I(on)/I(off) = 10(5); N,N'-bis(n-octyl)-1,7- and N,N'-bis(n-octyl)-1,6-dibromoperylene-3,4:9,10-bis(dicarboximide) (PDI-8Br2): mu = 3 x 10(-5) cm2 V(-1) s(-1), Vth = 62 V, I(on)/I(off) = 10(3); N,N'-bis(n-octyl)-1,6,7,12-tetrachloroperylene-3,4:9,10-bis(dicarboximide) (PDI-8Cl4): mu = 4 x 10(-3) cm2 V(-1) (s-1), Vth = 37 V, I(on)/I(off) = 10(4); N,N'-bis(n-octyl)-2-cyanonaphthalene-1,4,5,8-bis(dicarboximide) (NDI-8CN): mu = 4.7 x 10(-3) cm2 V(-1) s(-1), Vth = 28, I(on)/I(off) = 10(5); N,N'-bis(n-octyl)-1,7- and N,N'-bis(n-octyl)-1,6-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDI-8CN2): mu = 0.13 cm2 V(-1) s(-1), Vth = -14 V, I(on)/I(off) = 10(3); and N,N'-bis(n-octyl)-2,6-dicyanonaphthalene-1,4,5,8-bis(dicarboximide) (NDI-8CN2): mu = 0.15 cm2 V(-1) s(-1), Vth = -37 V, I(on)/I(off) = 10(2). Analysis of the molecular geometries and energetics in these materials reveals a correlation between electron mobility and substituent-induced arylene core distortion, while Vth and I(off) are generally affected by LUMO energetics. Our findings also indicate that resistance to ambient charge carrier trapping observed in films of N-(n-octyl)arylene diimides occurs at a molecular reduction potential more positive than approximately -0.1 V (vs SCE). OFET threshold voltage shifts between vacuum and ambient atmosphere operation suggest that, at E(red1) < -0.1 V, the interfacial trap density increases by greater than approximately 1 x 10(13) cm(-2), while, for semiconductors with E(red1) > -0.1 V, the trap density increase is negligible. OFETs fabricated with the present n-type materials having E(red1) > -0.1 V operate at conventional gate biases with minimal hysteresis in air. This reduction potential corresponds to an overpotential for the reaction of the charge carriers with O2 of approximately 0.6 V. N,N'-1H,1H-Perfluorobutyl derivatives of the perylene-based semiconductors were also synthesized and used to fabricate OFETs, resulting in air-stable devices for all fluorocarbon-substituted materials, despite generally having E(red1) < -0.1 V. This behavior is consistent with a fluorocarbon-based O2 barrier mechanism. OFET cycling measurements in air for dicyanated vs fluorinated materials demonstrate that energetic stabilization of the charge carriers results in greater device longevity in comparison to the OFET degradation observed in air-stable semiconductors with fluorocarbon barriers.     

Facile synthesis of microporous carbonaceous materials derived from a covalent triazine polymer for CO_2 capture

Highly porous nitrogen-doped carbon materials were synthesized by the carbonization of a low-cost porous covalent triazine polymer, PCTP-3, which had been synthesized by the AlCl_3 catalyzed FriedelCrafts reaction of readily available monomers. The nature of the bond and structure of the resulting materials were confirmed using various spectroscopic methods, and the effects of KOH activation on the textural properties of the porous carbon materials were also examined. The KOH-activated porous carbon(aPCTP-3c) materials possessed a high surface area of 2271 m~2 g~(-1) and large micro/total pore volumes of 0.87/0.95 cm~3 g~(-1), respectively, with narrower micropore size distributions than the porous carbon prepared without activation(PCTP-3c). The aPCTP-3c exhibited the best CO_2 uptakes of 284.5 and 162.3 mg g~(-1) and CH_4 uptakes of 39.6 and 25.9 mg g~(-1) at 273 and 298 K/1 bar, respectively, which are comparable to the performance of some benchmark carbon materials under the same conditions. The prepared materials exhibited high CO_2/N_2 selectivity and could be regenerated easily.     

New heterogeneous polyoxometalate based mesoporous catalysts for hydrogen peroxide mediated oxidation reactions

Inorganic-organic hybrid mesoporous materials were prepared by cocrystallization of a "sandwich" type polyoxometalate, [ZnWZn2(H2O)2(ZnW9O34)2]12-, and branched tripodal organic polyammonium salts, tris[2-(trimethylammonium)ethyl]-1,3,5-benzenetricarboxylate or 1,3,5-tris[4-(N,N,N-trimethylammoniumethylcarboxyl)phenyl]benzene trications. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed formation of three-dimensional perforated coral-shaped amorphous materials with the organic cations surrounding polyoxometalate anions. N2 sorption analysis showed that the hybrid materials have a BET surface area of approximately 30-50 m2 g(-1) and an average pore diameter of 36 A leading to the classification of these materials as mesoporous materials with moderate surface areas. These hybrid materials behaved as very effective and selective heterogeneous catalysts for the epoxidation of allylic alcohols and oxidation of secondary alcohols to ketones with hydrogen peroxide as oxidant. The activity and selectivity of the heterogeneous catalysts based on the hybrid materials was similar to those of homogeneous catalysts based on the same [ZnWZn1(H2O)2(ZnW9O34)2]12- polyoxometalate.     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.     

Combined extraction chromatography and scintillation detection for off-line and on-line monitoring of strontium in aqueous solutions

This paper presents the application of a new sensor materials, whichcombine extraction chromatography and scintillation detection. The resultantsensor embodies the simultaneous dual functionality of selective extractionand radiation detection, which has been applied towards off-line and on-linemonitoring of radiostrontium in aqueous solutions. The sensor materials are(1) a mixture of commercially available Sr-selective extraction chromatographicresin and granular scintillator, (2) bis-4,4'(5')-tert-butylcyclohexano-18-crown-6(DtBuCH18C6) in 1-octanol coated on the surface of a scintillating glass and(3) inert chromatographic resin impregnated with the organic fluors, 2,5 diphenyloxazole,(PPO) and 1-4 bis(4- methyl-5-phenyloxazol-2-yl) benzene, (DM-POPOP) and eitherDtBuCH18C6 in 1-octanol or a proprietary extractant. For off-line measurements,the sensor materials are used in the same manner as the commercially availableextraction chromatographic resin, but rather than eluting the activity fromthe column, the scintillating extraction column is placed in a scintillationvial and counted without the introduction of liquid scintillation cocktail.For on-line measurements, the sensor materials are used in conjunction witha flow-cell scintillation detection system to assess the activity retainedby the extractant in real-time. Characterization of the detection efficiencyand regeneration capability of the extractive scintillator materials is evaluated.     

Variation of surface properties and textural features of spinel ZnAl2O4 and perovskite LaMnO3 nanoparticles prepared via CTAB-butanol-octane-nitrate salt microemulsions in the reverse and bicontinuous states

Two binary oxides, a spinel, ZnAl2O4, and a typical perovskite, LaMnO3, have been prepared via CTAB-1-butanol-n-octane-nitrate salt microemulsion in the reverse and bicontinuous states. The exact point of the reverse and bicontinuous states of the microemulsion used in the synthesis was determined by conductivity experiments. The materials obtained after heating at 800 degrees C were characterized by XRD analysis for their crystal structure, N2 porosimetry for their surface area and porosity, and SEM and TEM photography for their texture. The ZnAl2O4 spinel obtained via the reverse microemulsion appears in SEM in a more fragmented form and with a higher specific surface area (143.7 m(2)g(-1)), compared to the corresponding solid prepared via the bicontinuous microemulsion, which appears more robust with lower surface area (126.7 m(2)g(-1)). Nevertheless both materials reveal in TEM a sponge-like structure. The perovskite materials LaMnO3 prepared via the reverse microemulsion showed in SEM a peculiar doughnut-like texture, each doughnut-like secondary particle having a diameter of 2 microm. The corresponding sample developed via the bicontinuous microemulsion showed in SEM uniform secondary particles of size approximately 0.2 microm. Both perovskite samples LaMnO3 appear well crystallized with relative low surface areas, 23.7 m(2)g(-1) for the reverse sample and 10.9 m(2)g(-1) for the bicontinuous one. The TEM photographs reveal that both of them, of reversed and bicontinuous origin, are made up of primary nanoparticles in the size range 40-100 nm. In SEM those materials showed a different secondary structure.     

Impurity diffusion of (141)Pr in LaMnO(3), LaCoO(3) and LaFeO(3) materials

The impurity diffusion of Pr(3+) in dense polycrystalline LaMnO(3), LaCoO(3) and LaFeO(3) was studied at 1373-1673 K in air in order to investigate cation diffusion in these materials. Cation distribution profiles were measured by secondary-ion mass spectrometry and it was found that penetration profiles of Pr(3+) had two distinct regions with different slopes. The first, shallow region was used to evaluate the bulk diffusion coefficients. The activation energies for bulk diffusion of Pr(3+) in LaMnO(3), LaCoO(3) and LaFeO(3) were 126 +/- 6, 334 +/- 68 and 258 +/- 75 kJ mol(-1), respectively, which are significantly lower than previously predicted by atomistic simulations. The bulk diffusion of Pr(3+) in LaMnO(3) was enhanced compared to LaCoO(3) and LaFeO(3) due to higher concentrations of intrinsic point defects in LaMnO(3), especially La site vacancies. Grain-boundary diffusion coefficients of Pr(3+) in LaCoO(3) and LaFeO(3) materials were evaluated according to the Whipple-Le Claire equation. Activation energies for grain-boundary diffusion of Pr(3+) in LaCoO(3) and LaFeO(3) materials were 264 +/- 41 kJ mol(-1) and 290 +/- 36 kJ mol(-1) respectively. Finally, a correlation between activation energies for cation diffusion in bulk and along grain boundaries in pure and substituted LaBO(3) materials (B = Cr, Fe, Co) is discussed.     

Toward Ultralow-Bandgap Liquid Crystalline Semiconductors: Use of Triply Fused Metalloporphyrin Trimer-Pentamer as Extra-large π-Extended Mesogenic Motifs

In contrast with their dimeric homologue, triply fused zinc porphyrin trimer-pentamer, as extra-large π-extended mesogens, assemble into columnar liquid crystals (LCs) when combined with 3,4,5-tri(dodecyloxy)phenyl side groups (3?P(Zn) -5?P(Zn) , Figure?1). Their LC mesophases develop over a wide temperature range, namely, 41-280?°C (on heating) for 5?P(Zn) , and all adopt an oblique columnar geometry, typically seen in columnar LC materials involving strong mesogenic interactions. These LC materials are characterized by their wide light-absorption windows from the entire visible region up to a near infrared (NIR) region. Such ultralow-bandgap LC materials are chemically stable and serve as hole transporters, in which 5?P(Zn) gives the largest charge carrier mobility (2.4×10(-2) cm?V(-1) s(-1) ) among the series. Despite a big dimensional difference, they coassemble without phase separation, in which the resultant LC materials display essentially no deterioration of the intrinsic conducting properties.     

Design of Thermally Activated Delayed Fluorescent Assistant Dopants to Suppress the Nonradiative Component in Red Fluorescent Organic Light-Emitting Diodes

Organic light-emitting diodes are currently under research to achieve high efficiency and long life by using thermally activated delayed fluorescence (TADF) materials. In particular, many studies have focused on ensuring high efficiency in fluorescent devices by introducing TADF materials. Herein, four kinds of orange-colored TADF materials were synthesized and introduced into 5,10,15,20-tetraphenylbisbenz[5,6]indeno[1,2,3-cd:1′,2′,3′-lm]perylene (DBP) red fluorescent devices as assistant dopants. These TADF materials assisted in achieving high efficiency in DBP devices by reducing nonradiative process by Dexter energy transfer and harvesting singlet excitons by a Förster resonance energy transfer process. Among the four TADF materials, 2-(3,5-di-tert-butylphenyl)-6-(9,9-diphenylacridin-10(9H)-yl)-1H-benzo[de]isoquinoline-1,3(2H)-dione (DtBIQAP) showed a higher reverse intersystem crossing rate and a smaller nonradiative rate constant than the other two materials, which can reduce the exciton loss process. As a result, the DtBIQAP-assisted DBP device showed a high maximum external quantum efficiency of 18.2 % and color coordinates of (0.63, 0.37) in red fluorescent organic light-emitting diodes. This study provided a strategy of developing assistant dopants for high external quantum efficiency in TADF-assisted fluorescent devices.     

Determination of ginsenoside content in Asian and North American ginseng raw materials and finished products by high-performance liquid chromatography: single-laboratory validation

A single-laboratory validation study was conducted for the quantification of Rg1, Re, Rb1, Rc, Rb2, and Rd in Asian ginseng (Panax ginseng C.A. Meyer) and North American ginseng (Panax quinquefolius L.) raw materials and finished products by RP-HPLC. The extraction with aqueous methanol was optimized for whole root, powdered extract, and finished product (raw, tablet, and capsule matrixes) test articles. Root materials were treated with base to hydrolyze acidic malonyl ginsenosides to their neutral counterparts. Calibration curves for each ginsenoside were linear over the following ranges (microg/g): 5-394 for Rg1, 15-1188 for Re, 39-2981 for Rb1, 6-499 for Rc, 5-406 for Rb2, and 7-600 for Rd, all having a coefficient of determination (r2) of > or = 99.5%. The LOD for Rg1, Re, Rb1, Rc, Rb2, and Rd was determined to be 1.06, 1.25, 2.19, 1.24, 1.27, and 1.70 microg/mL, respectively. Quantitative determinations performed with eight test materials by two analysts over 3 days (n = 12) resulted in RSDr values that ranged from 1.11 to 7.61%.     

Charge-transfer guest interactions in luminescent MOFs: implications for solid-state temperature and environmental sensing

One of the ongoing goals in the field of porous materials is the design and synthesis of materials that possess chemical structures amenable for use in sensing applications. We describe the preparation, luminescence characteristics, and environmental sensing properties of variants of the aluminum-based MOF [Al(OH)(O(2)C-C(10)H(6)-CO(2))](∞). Careful activation of the open framework complex, 1, yielded a dynamic structural transformation to a non-porous form, 2, that exhibited strong inter-linker interactions and red-shifted emission characteristics indicative of dimer formation. We also demonstrate the formation of highly luminescent ground-state charge-transfer (CT) complexes between 1 and the electron-donating amines dimethylamine (DMA) (1a), and N,N-diethylaniline (DEA) (1b), both of which exhibit dual-emission characteristics and a ratiometric luminescence response that is sensitive to temperature and solvent polarity. Steady-state and time-resolved measurements on 1a, 1b, and 2 indicate that the MOF structures stabilize ground-state CT interactions that are distinct from the weakly-bound exciplexes formed in comparable mixtures of purely organic components. The spectra for 1a and 1b also indicate different temperature dependencies that correspond to thermally-activated complex formation (ΔH(f) = +1.1 ± 0.2 kcal mol(-1)) in 1a and static quenching effects (ΔH(f) = -2.2 ± 0.3 kcal mol(-1)) in 1b. The addition of ethanol, isopropanol, toluene, or chloroform to suspensions of 1b indicate destabilization of the CT state with increasing solvent polarity, which suggests the generalized application of this or related materials in sensor applications.     

Organic glass-forming materials: 1,3,5-tris(naphthyl)benzene derivatives

The organic glass-forming materials 1,3-bis(1-naphthyl)-5-(2-naphthyl)benzene (2) and its partially deuterated analogue, 1,3-bis(1-naphthyl-d(7))-5-(2-naphthyl)benzene (2-d(14)), have been synthesized on a gram scale using Suzuki coupling reactions. Detailed spectroscopic studies afford complete NMR assignments (1H, 2H, 13C) for both compounds. Modest energy barriers for the interconversion of atropisomers (ca. 15 kcal/mol) result in a propensity for these materials to form supercooled liquids and glasses, rather than undergoing crystallization. The preparation of these materials enables detailed studies of physical properties of organic glasses and molecular diffusion in condensed phases.     

Tuning solid state luminescent properties in a hydrogen bonding-directed supramolecular assembly of bis-cyclometalated iridium(III) ethylenediamine complexes

Synthesis, crystal structural determination and photophysical properties of a series of heteroleptic cationic cyclometalated iridium(III) derivatives of general formula [(ppy)(2)Ir(en)]X (X = ClO(4)(-) (1), PF(6)(-) (2), Cl(-) (3), BPh(4)(-) (4)), are described. The assembly of the common molecular building block allows to get highly luminescent crystalline materials or to assemble poorly luminescent supramolecular channelled architectures, for which the additional contribution of oxygen quenching effects has been observed. Moreover, the high reproducibility of the preparations of the crystalline materials in their specific crystalline phases, makes the control of the supramolecular organization of photo-active iridium(III) complexes within the crystalline structures a useful synthetic procedure for the construction of highly luminescent materials.     

基于三萘苯的溶液可加工螺旋形寡聚物的合成及其在蓝光有机电致发光器件中的应用

近年来,人们在有机电致发光材料和器件结构方面取得了巨大的进步。然而由于蓝光材料具带隙宽的内禀属性,在发光效率、色纯度和稳定性上仍然面临巨大挑战。本文将螺旋形三萘苯共轭体系引入电致发光材料领域,它独特的螺旋形分子结构和易于化学修饰的特点有利于抑制聚集体和基激缔合物的形成。通过SiCl₄催化的环三缩合反应和Suzuki偶联反应,我们设计合成了以三萘基苯为核心,萘、蒽和三苯胺为取代基团的系列螺旋形蓝光寡聚物,并系统地研究了它们的热学、光物理和电化学性质。研究发现,萘和三苯胺取代的寡聚物1, 3, 5-三(3-(1-甲氧基萘-2-基)-4-甲氧基萘-1-基)苯(TNNB)和1, 3, 5-三(3-(4-(N, N-二苯胺基)苯基)-4-甲氧基萘-1-基)苯(TPANB)具有最好的热稳定性。在溶液中,这两种材料都具有深蓝发射,发射峰分别为382和415 nm;在薄膜中, TNNB的发射峰仅有1 nm的红移,而TPANB甚至产生了6 nm的蓝移。以这些寡聚物为发光材料,通过旋涂法制备的有机电致发光器件结果表明,基于TNNB的器件获得了最大亮度达到5273 cd·m^-2,色坐标(0.17, 0.11)的纯蓝光器件。