Thermal properties of random copolyesters of PET and 3- and 3,5-bromo-substituted p-hydroxybenzoic acids. II

Melt-polycondensation of poly(ethylene terephthalate) (PET) and 3-bromo-p-acetoxybenzoic acid or 3,5-dibromo-p-acetoxybenzoic acid in different mole ratios yielded random copolyesters. The copolyesters have higher T_gs than PET because of an increase in mol % of the substituted p-oxy-benzoate units and follow Wood's equation for copolymer T_gs. Using this equation, we calculated the T_gs of the homopolymers of 3-bromo-p-oxybenzoate and 3,5-dibromo-p-oxybenzoate, which are not available experimentally, to be 113 and 123°C, respectively. Up to certain percentages of the comonomer composition the copolyesters exhibited cold crystallization and melt transitions which we attribute to the crystallizable segments of PET. The variation in melting temperatures in the composition of the copolymer was explained by Flory's theory. The differences in the melting behavior of the polymer, annealed at various crystallization temperatures for a constant time interval, throws light on the morphological changes that took place in it. Using the Hoffman and Weeks method, we determined the extrapolated equilibrium melting temperatures of these copolyester which were used to calculate the enthalpy of melting for the crystallizable units.     

Layer structures. VI. Chiral sanidic polyesters derived from 2,5-bis (dodecyloxy) terephthalic acids and 4,4′-dihydroxybiphenyl

Copolycondensations of (S,S)-2,5-bis(2-methylbutyloxy) terephthaloylchloride with 2,5-bis(dodecyloxy)terephthaloylchloride and with 4,4′-bistrimethylsiloxybiphenyl yielded a series of novel chiral thermotropic copolyesters. These polyesters were characterized by elemental analyses, inherent viscosities, ¹H-NMR spectroscopy, optical rotations, optical microscopy, DSC measurements, and WAXS powder patterns recorded with synchrotron radiation under variation of the temperature. All homo- and copolyesters formed a solid sanidic layer structure with melting temperatures (T_m) ≥ 200°C. A broad enantiotropic nematic or cholesteric phase is formed above T_m with isotropization temperatures (T_is) in the range of 275–325°C. Yet, the T_m of the chiral homopolyester is so high (378°C) that the melting process is immediately followed by rapid degradation. The cholesteric phases of the copolyesters displayed unusual mobile schlieren textures, but a stable Grandjean texture was never obtained. Cholesteric domains consisting of loose bundles of more or less helical main chains are discussed as supramolecular order responsible for the observed textures and their pronounced temperature dependence. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 947–957, 1997     

PROPERTIES AND MICROSTRUCTURE OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS

The properties and structures of thermotropical liquid crystalline copolyesters basedon p-hydroxybenzoic acid (PHBA), terephthalic acid (TPA) and bisphenol A (BPA) werestudied by DSC, WAXD, hot stage polarized microscopy and NMR. It was found that mostof the copolyesters were soluble in many common organic solvents. The copolyesters hadfow T_m/T_f values and a broad range of liquid crystal phase, making the polymers readilymelt-processable. The effects of annealing at different temperatures on the copolyestercontaining 33% PHBA were also discussed. It was noted that annealing at ca. 200℃(below Tc - n) could lead to the increasing of the crystallinity of the copolyester while themicrostructure and sequence structure had not changed. Annealing at ca.280℃ (nearTc - n) could bring a change of crystal and sequence structure and simultaneously madethe ndcrodomains be ordered more perfectly.     

Thermal and pyrolysis studies of copolyesters

Random copolyesters of dimethyl terephthalate (DMT), ethylene glycol (EG), and butane-1,4-diol (BD) and the homopolyesters poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT) have been subjected to degradation and pyrolysis studies. Differential thermal analysis (DTA) showed that the decomposition temperature is dependent on the percentage of EG and BD present in the copolyesters. Thermal volatilization analysis (TVA) also showed that the decomposition temperature is dependent on the percentage of EG and BD present in the copolyesters. The trend for the decomposition temperatures obtained from TVA studies for these copolyesters is similar to such other thermal properties as melting temperature T_m, ΔH_f, ΔH_c, etc. The subambient thermal volatilization analysis (SATVA) curves obtained for these polymers are also presented. The SATVA curve is the fingerprint of the total volatile products formed during the degradation in high vacuum. The isothermal pyrolysis of these materials was carried out in high vacuum at 450°C. The products formed were separated in a gas chromatograph and were subsequently identified in a mass spectrometer. The major pyrolysis products from PBT were butadiene and tetrahydrofuran, whereas those from PET were ethylene and acetaldehyde. The ratio of acetaldehyde to ethylene increases with the EG content in the copolyester, suggesting a different decomposition mechanism compared to the decomposition mechanism of PBT and PET.     

含X-型二维液晶基元和冠醚环的液晶共聚酯的研究

合成了一系列新的含X-型二维液晶基元和反式-4,4'-双(4-羟基苯基偶氮)二苯并-14-冠-4冠醚环的主链型液晶共聚酯. 通过GPC, [η], DSC, TG, WAXD和POM对其液晶性研究发现, 所有的共聚酯都呈现出向列相的丝状织构或纹影织构. 共聚酯的熔融温度(T_m)和各向同性温度(T_i)随共聚酯分子中反式-4,4'-双(4-羟基苯基偶氮)二苯并-14-冠-4用量的改变呈规律性变化.     

New polymer syntheses 22. LC-poly(esterimide)s derived from trimellitic acid, ω-amino acids and hydroquinone or 4,4′-dihydroxybiphenyl

Diacids with variable spacer length were prepared by condensation of trimellitic anhydride and ω-amino acids. From these diacids, homopolyesters were prepared by thermal condensation with the acetates of hydroquinone or 4,4′-dihydroxy biphenyl and a series of copolyesters containing 4-hydroxy benzoic acid. The same LC poly(ester imide)s could also be prepared in a “one-pot procedure” from trimellitic anhydrid, lactams, and bisphenol acetates. The differential scanning calorimetry (DSC) traces of most poly(ester imide)s exhibit two endotherms representing the solid → LC phase transition (Tm₁) and the LC phase → isotropic melt transition (Tm₂). Observation under the polarizing microscope and wide-angle X-ray scattering (WAXS) measurements suggest that the LC phase formed immediately above the melting points (Tm₁) have a smectic character. Poly(ester imide)s of 4,4′-dihydroxybiphenyl possess higher melting points and a broader temperature range of the LC phase than those of hydroquinone. The copolyesters possess a nematic melt over a broad temperature range. Thermomechanical analyses under low pressure (0.05 kg/mm²) gave heat distortion temperatures close to the melting points (Tm₁), and under high pressure (1 kg/mm²), values between Tm₁ and the glass transition temperatures (T_g). Thermogravimetric measurements indicate that processing from the melt is feasible up to temperatures around 340°C.     

Poly(butylene terephthalate‐co‐5‐tert‐butyl isophthalate) copolyesters: Synthesis,characterization, and properties

A series of poly(butylene terephthalate) copolyesters containing 5‐tert‐butyl isophthalate units up to 50 mol %, as well as the homopolyester entirely made of these units, were prepared by polycondensation from a melt. The microstructure of the copolymers was determined by NMR to be random for the whole range of compositions. The effect exerted by the 5‐tert‐butyl isophthalate units on thermal, tensile, and gas transport properties was evaluated. Both the melting temperature (T_m) and crystallinity were found to decrease steadily with copolymerization, whereas the glass‐transition temperature (T_g) increased and the polyesters became more brittle. Permeability and solubility slightly increased with the content in substituted isophthalic units, whereas the diffusion coefficient remained practically constant. For the homopolyester poly(5‐tert‐butyl isophthalate), all these properties were found to deviate significantly from the general trend displayed by copolyesters, suggesting that a different structure in the solid state is likely adopted in this case. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 92–100, 2005     

Wholly aromatic thermotropic liquid crystalline polyesters of 2-(α-phenylisopropyl)hydroquinone; copolymers with 1,1′-biphenyl-4,4′-diol and 2,6-dihydroxynaphthalene

Two series of new aromatic copolyesters have been synthesized and their properties including liquid crystallinity have been studied. The first series was synthesized by polymerizing mixtures of diacetates of 2-(α-phenylisopropyl)hydroquinone and 1,1′-biphenyl-4,4′-diol with terephthalic acid, and the second by polymerizing mixtures of diacetates of 2-(α-phenylisopropyl)hydroquinone and 2,6-dihydroxynaphthalene with terephthalic acid. These polyesters were characterized by differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffractomerty, and optical microscopy. The glass transition temperatures of the first series decrease from 167 to 138°C as one increases the content of the 1,1′-biphenyl-4,4′-diol unit to 50 mol %. The T_g values of the second series are slightly higher than those of the first series, and appear to be less dependent on their composition. The degree of crystallinity of the first series decreases rapidly by copolymerization, much faster than that of the second series. The melting points of the first series copolymers are significantly lower than those of the second series. All of the copolyesters reported in this investigation form nematic melts. The initial decomposition temperatures of the copolymers were higher than 450°C. It was confirmed that thermal stability of the homopolyester, PIBPL-1.00, containing the isopropylidene units is significantly improved when compared with that carrying benzylic hydrogens. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2777–2786, 1997     

Synthesis and characterization of isomeric polyesters based on sebacic acid and hexanediols

Isomeric homopolymers and random copolyesters based on sebacic acid and isomeric hexanediols were synthesized by condensation techniques and characterized by NMR, GPC, intrinsic viscosity, and DSC. Among the homopolymers, only the polyester derived from the linear 1,6-hexanediol was found to be crystalline. Typical melting points were 65–70°C, depending on molecular weight, and a T_g of ?62°C was measured on a high molecular weight sample. Other isomeric homopolymers derived from the branched diols 2-methyl-2-ethyl-1,3-propanediol and 2,5-hexanediol were amorphous tacky fluids with glass temperatures of ?69 and ?66°C, respectively. In the case of the random copolymers, NMR analysis was particularly useful in determining the copolymer composition or the diol isomer ratio. DSC data indicated that all the random copolymers containing the linear 1,6-diol were crystallizable and their melting points depended on copolymer composition. The heat of fusion per repeat unit of poly(hexamethylene sebacate) was found to be 32 cal/g from measurements of the molecular weight dependence of the melting point.     

Synthesis and characterization of a series of wholly aromatic copolyesters containing 2‐(α‐phenylisopropyl)hydroquinone moiety

Two series of new wholly aromatic thermotropic copolyesters containing the 2‐(α‐phenylisopropyl)hydroquinone (PIHQ) moiety have been synthesized and their basic properties such as glass transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity were studied by differential scanning calorimetry (DSC), thermogravimetry (TG), and wide‐angle X‐ray diffractometry (WAXD) and on a polarizing microscope. The first series was prepared from acetylated PIHQ, terephthalic acid (TPA), and 2,6‐naphthalenedicarboxylic acid (NDA), and the second series from acetylated PIHQ, TPA, and 1,1′‐biphenyl‐4,4′‐dicarboxylic acid (BDA). The T_g values (152–168°C) of the two series are not much different, although the values for the first series appear slightly higher. The T_m values (287–378°C) and the degree of crystallinity of the first series are appreciably greater than those of the second series. Such differences can be explained by the geometric structure of NDA and BDA moieties. All of the present polyesters are thermotropic and nematic. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 881–889, 1999     

Synthesis and characterization of fully biobased poly(propylene succinate‐ran‐propylene adipate). Analysis of the architecture‐dependent physicochemical behavior

Fully biobased aliphatic random poly(1,3‐propylene succinate‐ran‐1,3‐propylene adipate) (PPSA) copolyesters with high molar mass were synthesized with different macromolecular architectures based on various succinic acid/adipic acid (SA/AA) molar ratio, by transesterification in melt. Titanium (IV) isopropoxide was used as an effective catalyst. All synthesized copolyesters were fully characterized by different chemical and physicochemical techniques including NMR, size exclusion chromatography, FTIR, wide angle X‐ray scattering, differential scanning calorimetry, and thermogravimetric analysis. The final copolyesters molar compositions were identical to the feed ones. The different sequences based on succinate and adipate segments were randomly distributed along the chains. All the corresponding copolyesters showed an excellent thermal stability with a degradation onset temperature higher than 290 °C, which increased with the adipate content. According to their compositions and architectures, PPSA copolyesters can exhibit or not a crystalline phase, at room temperature. T_g of copolyesters decreased with the adipate content due to the decrease in the chains mobility, following the Gordon–Taylor relation. PPSA showed a pseudo eutectic melting behavior characteristic of an isodimorphic character. Finally, PPSA copolyesters were not able to crystallize during the cooling or the second heating run, due to the 1,3‐propanediol chemical structure, which led to amorphous materials with the exception of the polyester based solely on AA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2738–2748     

Partially renewable copolyesters prepared from acetalized d‐glucitol by solid‐state modification of poly(butylene terephthalate)

The backbone of poly(butylene terephthalate) (PBT) was modified with 2,4:3,5‐di‐O‐methylene‐D ‐glucitol (Glux) using solid‐state modification (SSM). The obtained copolyesters proved to have a non‐random overall chemical microstructure. The thermal properties of these semicrystalline, block‐like, Glux‐based materials were extraordinary, showing higher melting points, and glass transition temperatures compared with other sugar‐based copolyesters prepared by SSM. These remarkable thermal properties were a direct result of the inherently rigid structure of Glux and the relatively slow randomization of the block‐like chemical microstructure of the Glux‐based copolyesters in the melt. SSM proved to be a versatile tool for preparing partially biobased copolyesters with superior thermal properties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 164–177     

Carbohydrate‐based copolyesters made from bicyclic acetalized galactaric acid

Mixtures of the dimethyl esters of adipic acid and 2,3:4,5‐di‐O‐methylene‐galactaric acid (Galx) were made to react in the melt with either 1,6‐hexanediol or 1,12‐dodecanediol to produce linear polycyclic copolyesters with aldarate unit contents varying from 10 up to 90 mole %. The copolyesters had weight–average molecular weights in the ～35,000–45,000 g mol^?1 range and a random microstructure, and were thermally stable up to nearly 300 °C. They displayed T_g in the ‐50 to ‐7 °C range with values largely increasing with the content in galactarate units. All the copolyesters were semicrystalline with T_m between 20 and 90 °C but only those made from 1,12‐dodecanediol were able to crystallize from the melt at a crystallization rate that decreased as the contents in the two comonomers approached each other. Copolyesters containing minor amounts of galactarate units adopted the crystal structure characteristic of aliphatic polyesters but a new crystal polymorph was formed when the cyclic sugar units became the majority. Stress–strain parameters were sensitively affected by composition of the copolyesters with the mechanical behavior changing from flexible/ductile to stiff/brittle with the replacement of adipate units by the galactarate units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Biodegradable liquid crystalline aromatic/aliphatic copolyesters. Part I: Synthesis, characterization, and hydrolytic degradation of poly(butylene succinate-co-butylene terephthaloyldioxy dibenzoates)

To increase the thermal and mechanical properties of the aliphatic polyester poly(butylene succinate) (PBS), a series of potentially biodegradable liquid crystalline aromatic/aliphatic random copolyesters were prepared by melt polycondensation of new mesogenic monomers dimethyl 4,4′-(terephthaloyldioxy) dibenzoate (MTB), dimethyl succinate, and 1,4-butanediol. The synthesized copolyesters were characterized by means of proton nuclear magnetic resonance spectroscopy (¹H NMR), gel permeation chromatography (GPC), viscosity measurements, differential scanning calorimetry (DSC), thermogravimetry (TG), X-ray diffraction (XRD), polarizing light microscopy (PLM) and mechanical property measurements. The MTB content was varied so that the effects of the mesogen content on the thermal and mechanical properties, degradable behaviours and mesophase were examined. It was found that introducing the rigid rod mesogens could increase the thermal stability and the mechanical properties, while it reduced the melting temperature (T_m), the crystallization temperature (T_c), the degree of relative crystallinity (X_c) and the hydrolytic degradation rate. Only the homopolyester poly(butylenes terephthaloyldioxy dibenzoates) was able to show the schlieren texture characteristic of nematics.     

Mechanical properties and transition temperatures of crosslinked-oriented gelatin

 This second part of a systematic study of the properties of crosslinked-oriented gelatin involves the effects of orientation and water content on the glass transition temperature T _g and on the melting behavior. The samples were the same as those in the preceding study, and their transition temperatures were determined by both differential scanning calorimetry and dynamic mechanical thermal analysis. The crosslinked gelatin which had been room-conditioned showed two transition temperatures: the lower one was attributed to T _g of the water-plasticized gelatin, and the higher one was interpreted as T _g of dried gelatin superimposed by melting. A rather unusual situation arose because of the fact that the T _g and melting temperatures T _m (217 and 230 ^°C, respectively) are so similar. Using water as plasticizer not only decreases T _g but produces imperfect crystallites which melt below the T _g of the system. The presence of the amorphous phase in the glassy state would presumably make it essentially impossible to define a melting point or crystallization temperature in the normal manner, as an equilibrium between crystalline and amorphous phases. Received: 8 October 1996 Accepted: 2 November 1995     

Hydroxy-terminated poly(ε-caprolactone-co-δ-valerolactone) oligomers: Synthesis,characterization, and polyurethane network formation

Difunctional hydroxy-terminated poly(ε-caprolactone-co-ε-valerolactone) (PCV) oligomers were synthesized by the diol-initiated bulk copolymerization of ε-caprolactone (C) and δ-valerolactone (V). The two homopolymers were semicrystalline, with almost identical melting temperatures; copolymerization significantly lowered the melting point (T_m) compared to either homopolymer. Copolymer melting points were found to decrease with decreasing molecular weight and to be dependent on composition, i.e., the incorporation of a comonomer into either homopolymer resulted in a decrease in T_m, with the maximum decrease occurring at a copolymer composition of about 60 mol % ε-caprolactone. The molar compositions of the copolyesters were determined from ¹³C-NMR spectra. The reactivity ratios of the two monomers (M₁ = C, M₂ = V) were determined to the r₁ = 0.25 and r₂ = 0.49. Number average molecular weight (M?_n) of the PCV diols was inversely proportional to the initial diol concentration within the studied molecular weight range of 900 to 11,100 g/mol. Crosslinked polyurethane networks were prepared by reacting PCV diols with triphenylmethane triisocyanate. Network characterization included determination of sol content by solvent extraction, glass transition (T_g) and T_m by DSC, and tensile properties by stress-strain measurements. Completely amorphous networks resulted from PCV diols of M?_n ≤ 2,400; semicrystalline networks resulted from PCV diols of M?_n ≥ 3,600.     

Study on poly(oxybenzoate-p-trimethylene terephthalate) copolymer

This study examined copolymers synthesized from poly(trimethylene terephthalate) (PTT) and p-acetoxybenzoic acid using solution proton nuclear magnetic resonance (NMR) spectroscopy. Proton NMR spectra showed that these p-oxybenzoate (POB)/PTT copolyesters were almost random copolymers because the preference factor of POB bonded to another POB unit in these copolyesters is close to 1.0 with a POB content between 20 and 80 mol%.The melting and crystallization behaviors of these copolyesters were studied by differential scanning calorimetry (DSC). In the heating DSC scan of the POB rich composition, the endothermic peak is weaker because the enthalpy of fusion decreased due to a melting transition from a crystalline to anisotropy liquid state. Thermogravimetric analysis results indicated that the decomposition temperature (T_d) increased with POB content. The crystalline morphology of the copolyester was further investigated with a polarized optical microscope, indicating that the POB/PTT copolyesters with 60 mol% POB are highly anisotropic in the liquid state.     

Thermotropic liquid-crystalline copolyesters containing substituted phenylene terephthalate and ethylene terephthalate units

Three series of aromatic, thermotropic copolyesters, based on terephthalic acid (TA), ethylene glycol (EG), and another diol were prepared. The third monomer was selected from three different hydroquinones including, ethoxyhydroquinone (EHQ), phenylhydroquinone (PHQ), and hydroquinone itself (HQ). The amounts of the different hydroquinone terephthalate units were varied while the amounts of ethylene terephthalate units remained constant. The copolymers and terpolymers were characterized for solubility, for morphology by polarized light microscopy (PLM), for molecular weight by solution viscometry, and by NMR, DSC, and TGA. At elevated temperatures all samples, when observed by PLM, displayed the characteristic texture of a nematic phase. The melting transition temperatures, T_m, were found to vary from 255 to 325°C, while the 5 wt % loss temperatures, T_d, were found to vary from 330 to 440°C. The inherent viscosities varied from 0.6 to 1.9 dL/g. Increases in the HQ monomer content caused a decreased solubility and an increase in melting point. Copolymer compositions determined by NMR showed that only about one-half of the EG added was incorporated into the copolymers. © 1997 John Wiley & Sons, Inc.     

SYNTHESIS AND CHARACTERIZATION OF MAIN CHAIN AROMATIC LIQUID CRYSTAL COPOLYESTERS WITH X-SHAPED AND ROD-SHAPED MESOGENIC UNITS

A series of main chain liquid crystal aromatic copolyesters with X-shapedand rod-shaped mesogenic units were synthesized via solution condensation polymerizationsof 4, 4'-(α,ω-octanedioyloxy)-dibenzoyl dichlorides with 2,5-bis(p-octanoxy benzoyloxy)-hydroquinone and diphenol. All of the copolyesters showed thermotropic liquid crystallinebehaviors through observations using DSC, polarized microscopy and X-ray diffraction.The melting point (T_m) and the isotropization temperature (T) change regularly withvarying the content of diphenol unit in the copolymers.     

Synthesis,characterization, and in vitro degradation of thermotropic polyesters and copolyesters based on terephthalic acid, 3‐(4‐hydroxyphenyl)propionic acid,and glycols

A new series of thermotropic liquid‐crystalline (LC) polyesters were prepared from a diacyl chloride derivative of 4,4′‐(terephthaloyldioxy)‐di‐4‐phenylpropionic acid (PTP) and glycols with a different number of methylene groups (n) [HO(CH₂)_n OH, n = 6–10, 12] by high‐temperature solution polycondensation in diphenyl oxide. PTP6/10 and PTP6/hydroquinone (H) LC copolyesters were also prepared according to a similar procedure. The chemical structure, LC, phase‐transition behaviors, thermal stability, and solubility were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H and ¹³C NMR spectra, differential scanning calorimetry (DSC), thermogravimetric analysis, and a polarizing light microscope. The melting and isotropization temperatures decreased in a zigzag manner as the number of n increased. All of the polyesters formed a nematic phase with the exception of PTP8. The temperature ranges of the mesophase (ΔT) were much wider for the polyesters with an odd number of n's than those with an even number. ΔT increased markedly for the PTP6/10 and PTP6/H copolyesters. The in vitro degradations of the polymers were ascertained by enzymatic hydrolysis and alkaline hydrolysis. The model compound, PTP dihexylester, was synthesized and found to be degraded into terephthalic acid, 3‐(4‐hydroxyphenyl)propionic acid, and 1‐hexanol by Rhizopus delemar lipase, but PTPn homopolyesters and PTP6/10 and PTP6/H copolyesters were resistant to Rhizopus delemar hydrolysis. They were degradable in a sodium hydroxide buffer solution of pH 12 at 60 °C, depending on the number of n's and the copolymer composition. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3043–3051, 2001