Preparation,Characterization and Application of Modified Surfaces with 3,5-Bis(3,5-dinitrobenzoyl-amino) benzoic acid

Summary: The spontaneous adsorption of the dendron 3,5-Bis (3,5-dinitrobenzoylamino) benzoic acid (D-NO₂) onto gold and carbon electrodes produced conductive surfaces with electroactive chemical functions. A comparative electrochemical behavior of both electrodes after dendron immobilization led us to conclude that the self-assembly of D-NO₂ on carbon is faster and stronger. Considering this advantage, the surface of magnetic maghemite nanoparticles (MNPs) was modified using D-NO₂. Firstly, MNPs were modified with APS as silane coupling agent and afterwards, D-NO₂ was covalently attached to the surface, achieving nitro-functionalized MNPs. Subsequently, the immobilization of these modified MNPs onto glassy carbon surfaces was explored to generate a novel platform promising for biosensors development.     

Fluorocarbon End-functionalized Polymers from Poly(arylether) Dendritic Initiators

Fréchet-type poly(arylether) first and second generation (G1 and G2 respectively) dendrons were prepared from 1-(bromomethyl)-3,5-bis(trifluoromethyl)benzene. The latter and the brominated versions of the two dendrons were successfully employed in the copper mediated living radical polymerization (LRP) of styrene-d₈ giving polymers of predictable molecular weights and narrow polydispersities. Contact angle measurements and ion beam analysis were used to explore the adsorption of these materials to the air-polymer surface in blended films with unfunctionalized hydrogenous polystyrene. Although contact angle analysis indicated only modest changes in the hydrophobicity and lipophobicity of the surface, ion beam analysis clearly showed the formation of an excess layer of dendron functionalized polymer at the exposed surface that increased with increasing fluorine content.     

Surface characterization of immunosensor conjugated with gold nanoparticles based on cyclic voltammetry and X-ray photoelectron spectroscopy

This investigation describes the surface characterization of rabbit immunoglobulin G (IgG) conjugated with gold nanoparticles. Goat anti-rabbit immunoglobulin G tagged with 5 nm gold nanoparticles was applied to detect the IgG. Then, the autocatalyzed deposition of Au³⁺ onto the surface of anti-IgGAu increased the surface area per gold nanoparticle. The immobilization chemistries and the atomic concentrations of Au_4f, P_2p, S_2p, C_1s, N_1s and O_1s of the resulting antibody-modified Au electrodes were determined by X-ray photoelectron spectroscopy (XPS). The sulfur that is involved in the cysteamine binding and the enlargement of the gold nanoparticles are identified using cyclic voltammetry. The results reveal that the surface area per gold particle, following the autocatalyzed deposition Au³⁺ on the surface of anti-IgGAu, was approximately seven times higher than that before deposition.     

Covalently Grafting Graphene onto Si Photocathode to Expedite Aqueous Photoelectrochemical CO2 Reduction

Silicon semiconductor functionalized with molecular catalysts emerges as a promising cathode for photoelectrochemical (PEC) CO₂ reduction reaction (CO₂RR). However, the limited kinetics and stabilities remains a major hurdle for the development of such composites. We herein report an assembling strategy of silicon photocathodes via chemically grafting a conductive graphene layer onto the surface of n⁺-p Si followed by catalyst immobilization. The covalently-linked graphene layer effectively enhances the photogenerated carriers transfer between the cathode and the reduction catalyst, and improves the operating stability of the electrode. Strikingly, we demonstrate that altering the stacking configuration of the immobilized cobalt tetraphenylporphyrin (CoTPP) catalyst through calcination can further enhance the electron transfer rate and the PEC performance. At the end, the graphene-coated Si cathode immobilized with CoTPP catalyst managed to sustain a stable 1-Sun photocurrent of −1.65 mA cm⁻² over 16 h for CO production in water at a near neutral potential of −0.1 V vs. reversible hydrogen electrode. This represents a remarkable improvement of PEC CO₂RR performance in contrast to the reported photocathodes functionalized with molecular catalysts.     

Modulation of the Activity of Gold Clusters Immobilized on Functionalized Mesoporous Materials in the Oxidation of Cyclohexene via the Functional Group. The Case of Aminopropyl Moiety

Gold nanoclusters and isolated gold atoms have been produced in a two-liquid phase procedure that involves a solution of gold in aqua regia and rosemary essential oil as organic layer. These gold entities have been immobilized on the ordered mesoporous silica material SBA-15 functionalized with different amounts of aminopropyl groups. The resulting materials have been characterized by XRD, N₂ adsorption, chemical analysis, TGA, ²⁹Si MAS NMR, ¹³C CP/MAS NMR, UV-vis spectroscopy, XPS, and STEM. The Au-containing materials retain the ordering and porosity of the pristine support. Gold content varies in the range of 0.07–0.7 wt% as a function of the specific immobilization conditions, while STEM evidences the presence of isolated gold atoms. XPS shows a shift of the Au 4f BE toward values lower than those of metallic gold. The catalytic activity in the oxidation of cyclohexene with molecular oxygen at atmospheric pressure parallels the Au content of the aminopropyl-SBA-15 supports. This activity is higher than that of analogous Au entities immobilized on SBA-15 functionalized with thiol or sulfonate groups, the activity decreasing in the order Au-NH₂ > Au-SO₃⁻ > Au-SH. This behavior has been attributed to differences in the interaction strength between the functional group and the Au entities, which is optimum for the aminopropyl groups.     

Novel Protocol for Covalent Immobilization of Horseradish Peroxidase on Gold Electrode Surface

A novel protocol for immobilization of horseradish peroxidase (HRP) onto diazonium functionalized screen‐printed gold electrode (SPGE) has been successfully developed. This protocol involved 1) electrochemical reduction of p‐nitrophenyl diazonium salts synthesized in situ in acidic aqueous solution to graft a layer of p‐nitrophenyl on SPGE, 2) electrochemical reduction of the nitro groups to convert to amines, 3) chemical reaction with nitrous acid to transform the amine to diazonium derivative and 4) chemical coupling of the enzyme with the diazonium group to form a covalent diazo bond. The fabricated biosensor showed the direct electrochemistry of HRP and displayed electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) without any mediator. The biosensor exhibited fast amperometric response to H₂O₂. The catalytic current increased with increasing H₂O₂ concentration from 5 μM to 30 μM and the detection limit of the biosensor was 2 μM. The biosensor exhibited acceptable sensitivity, good reproducibility and long‐term stability.     

An approach for the surface functionalized gold nanoparticles with pH-responsive polymer by combination of RAFT and click chemistry

In this report, we demonstrated a novel efficient post-modification route for preparation of smart hybrid gold nanoparticles with poly(4-vinylpyridine) (P4VP) based on RAFT and click chemistry. A new azide terminated ligand was first synthesized to modify gold nanoparticles by ligand exchange reaction, and then click reaction was used to graft alkyne terminated P4VP which was prepared by RAFT onto the surface of gold nanoparticles. The functionalized hybrid gold nanoparticles were characterized by TEM, FTIR, and XPS etc. The results indicated that the P4VP was successfully grafted onto the surface of gold nanoparticles by click reaction. The surface grafting density was calculated to be about 6 chains/nm²_. In addition, the hybrid gold nanoparticles showed a pH responsive phenomenon as the pH value changed around 5.     

A Multistep Enzyme Sensor for Sucrose Based on S-Layer Microparticles As Immobilization Matrix

Abstract

In this paper we report on the construction principle and performance of an amperometric 3-enzyme sensor for sucrose based on crystalline bacterial cell surface layers (S-layers) as immobilization matrix for the biological components.

Isoporous, crystalline surface layers (S-layers) have been identified as outermost cell envelope layer in many bacteria. Since they are composed of identical protein or glycoprotein subunits with functional groups in well defined positions and orientations, they represent ideal matrices for the controlled and reproducible immobilization of functional macromolecules, as required for the development of biosensors. Apart from single enzyme sensors, which were described earlier, a strikingly simple method for the assembly and optimization of multistep systems was developed. For the fabrication of an amperometric sucrose sensor invertase, mutarotase and glucose oxidase were individually immobilized on S-layer fragments isolated from Clostridium thermohydrosulfuricum L111-69 via aspartic acid as spacer molecules. Subsequently, appropriate mixtures of enzyme loaded S-layer fragments were deposited on a microfiltration membrane and finally, the composite multifunctional sensing layer was sputtered with gold in order to establish a good metal contact. Amperometric sucrose measurements based on H₂O₂ oxidation revealed a high signal level (1 μA^?1/cm^2?mmol sucrose), 5 min response time and a linear range up to 30 mM sucrose as the main characteristics of the S-layer sucrose sensor.     

A Reagentless Tyrosinase Biosensor Based on 1,6‐Hexanedithiol and Nano‐Au Self‐Assembled Monolayers

An amperometric tyrosinase biosensor was developed via a simple and effective immobilization method using the self‐assembled monolayers (SAMs) technique. The organic monolayer film was first formed by the spontaneous assembly of thiolor sulfur compound (1,6‐hexanedithiol, HDT) from solution onto gold electrode. When these thiol‐rich surfaces were exposed to Au colloid, the sulfurs form strong bonds to gold nanoparticles, anchoring the clusters to the electrode substrate. After the assembly of gold nanoparticles layer, a new nano‐Au surface was obtained. Thus, the tyrosinase could be immobilized onto the electrode. The tyrosinase retained its activity well in such an immobilization matrix. The various experimental variables for the enzyme electrode were optimized. The resulting biosensor can reach 95% of steady‐state current within 10 s, and the trend in the sensitivity of different phenolic compounds was as follows: catechol>phenol>p‐cresol. In addition, the apparent Michaelis–Menten constant (K and the stability of the enzyme electrode were estimated.     

The effects of carbon nanotubes on the electrocatalysis of hydrogen peroxide by metallo-phthalocyanines

The pre-grafted screen-printed gold electrode modified with phenyl-amino monolayer was investigated for covalent immobilization of phenyl-amine functionalized single-walled carbon nanotubes (PA-SWCNT) and metal tetra-amino phthalocyanine (MTAPc) using Schiff-base reactions with benzene-1,4-dicarbaldehyde (BDCA) as cross-linker. The PA-SWCNT and MTAPc modified electrodes were applied as hybrids for electrochemical sensing of H₂O₂. The step-by-step fabrication of the electrode was followed using electrochemistry, impedance spectroscopy, scanning electron microscopy and Raman spectroscopy and all these techniques confirmed the fabrication and the immobilization of PA-SWCNT, MnTAPc and CoTAPc onto gold surfaces. The apparent electron transfer constant (k_app) showed that the carbon nanotubes and metallo-phthalocyanines hybrids possess good electron transfer properties compared to the bare, pre-grafted and the MTAPc modified gold electrode surfaces without PA-SWCNT. The electrochemical sensing of hydrogen peroxide was successful with PA-SWCNT-MTAPc hybrid systems showing higher electrocatalytic currents compared to the other electrodes. The analytical parameters obtained using chronoamperometry gave good linearity at H₂O₂ concentrations ranging from 1.0 to 30.0 μmol L⁻¹. The values for the limit of detection (LoD) were found to be of the orders of 10⁻⁷ M using the 3δ for all the electrodes. The PA-SWCNT-MTAPc modified SPAuEs were much more sensitive compared to PA-MTAPc modified SPAuEs.     

Electrochemical Biosensor Utilizing Supramolecular Association of Enzyme on Sol−gel Matrix Embedded Gold Nanoparticles Supported Reduced Graphene Oxide−cyclodextrin Nanocomposite

Herein we present β‐cyclodextrin (CD)‐functionalized reduced graphene oxide (RGO) nanosheets supported on silicate sol‐gel matrix‐embedded gold nanoparticles (Au NPs) modified electrode as a new affinity binding nanocomposite. The modified electrode is fabricated through layer‐by‐layer drop casting followed by immobilization of chemically modified enzyme conjugate (horse radish peroxidase (HRP)?adamantane carboxylic acid (ADA)). This affinity system is based on the supramolecular association between CDs and HRP?ADA and is mimicking the biological avidin?biotin interactions. CDs‐functionalized RGO (RGO?CD) functions as a macrocyclic host to form stable supramolecular inclusion complexes with enzyme conjugate. Besides Au NPs improve the interfacial interaction with RGO?CD nanosheets, and thus exhibit synergistic electrocatalytic effect toward H₂O₂ reduction in the presence of 1 mM hydroquinone.     

Examination of incubation time of bare gold electrode inside cysteamine solution for immobilization of multi-walled carbon nanotubes on a gold electrode modified with cysteamine

A cysteamine (CysAm) nanostructure was generated to act as an intermediate layer between gold electrode and carbon nanotubes. A bare gold electrode was placed in a solution of CysAm to create a self-assembled monolayer on its surface. The modified electrode was then incubated with a solution of multi-walled carbon nanotubes. Cyclic voltammetry and atomic force microscopy were used to characterize the modified electrode. The results indicated that the number of functionalized MWCNTs on the surface of the electrodes increased by enhancing incubation time.

Oxygenation of sulfides catalysed by SBA‐15‐immobilized molybdenum(VI) complex of a bis(phenol) diamine ligand using aqueous hydrogen peroxide as a green oxidant

A highly efficient and reusable molybdenum‐based catalyst has been synthesized by covalent grafting of a bis(phenol) diamine ligand, namely 2‐(((2‐bromoethyl)(2‐((3,5‐di‐tert‐butyl‐2‐hydroxybenzyl)amino)ethyl)amino)methyl)‐4,6‐di‐tert‐butylphenol, onto functionalized ordered mesoporous silica (SBA‐15) followed by complexation with MoO₂(acac)₂. The resulting organic–inorganic hybrid material was found to be a highly effective catalyst for oxygenation of various sulfides to their corresponding sulfoxides or sulfones. The catalyst was characterized using transmission and scanning electron microscopies, X‐ray photoelectron, Fourier transform infrared and atomic absorption spectroscopies, Brunauer–Emmett–Teller surface area analysis and thermogravimetric analysis. Mild reaction conditions, high selectivity and easy recovery and reusability of the catalyst render the presented protocol very useful for addressing industrial needs and environmental concerns.     

Synthesis of Polyisoprene Terpenoid Dendrons and their Applications in Oligo(phenylene ethynylene)s as “Shells”

The novel double‐stage convergent synthesis of a new class of polyisoprene terpenoid (PIPTP) dendrons is described. PIPTP dendrons bear a highly branched aliphatic hydrocarbon skeleton and a hydrophilic hydroxy focal point functionality. These dendrons have the specific formula C_(5×2^G+1_‐5)H_(5×2^G+2_‐8)O, and each dendritic layer is constructed from an isoprene unit. The key branching steps involve a double alkyl‐metal addition to an ester functionality, followed by deoxygenation of the resulting tertiary alcohol by triethylsilane and trifluoroacetic acid, then hydrogenation or hydrogenolysis. The dendrons were also attached to oligo(phenylene ethynylene)s (OPEs) so as to function as protective shells to allow fine tuning of the nanoscopic environment around the OPE moiety, and to exert precise control of the packing density and intermolecular interaction between the OPE cores. Fluorescence quantum yield data reveal that the OPE core is better encapsulated by the PIPTP dendrons than by Fréchet dendrons.     

Bioconjugation of trypsin onto gold nanoparticles: Effect of surface chemistry on bioactivity

The systematic study of activity, long-time stability and auto-digestion of trypsin immobilized onto gold nanoparticles (GNPs) is described in this paper and compared to trypsin in-solution. Thereby, the influence of GNP's size and immobilization chemistry by various linkers differing in lipophilicity/hydrophilicity and spacer lengths was investigated with regard to the bioactivity of the conjugated enzyme. GNPs with different sizes were prepared by reduction and simultaneous stabilization with trisodium citrate and characterized by UV/vis spectra, dynamic light scattering (DLS), ζ-potential measurements and transmission electron microscopy (TEM). GNPs were derivatized by self-assembling of bifunctional thiol reagents on the nanoparticle (NP) surface via dative thiol-gold bond yielding a carboxylic acid functionalized surface. Trypsin was either attached directly via hydrophobic and ionic interactions onto the citrate stabilized GNPs or immobilized via EDC/NHS bioconjugation onto the carboxylic functionalized GNPs, respectively. The amount of bound trypsin was quantified by measuring the absorbance at 280 nm. The activity of bound enzyme and its Michaelis Menten kinetic parameter K_m and v_max were measured by the standard chromogenic substrate N_α-Benzoyl-DL-arginine 4-nitroanilide hydrochloride (BApNA). Finally, digestion of a standard protein mixture with the trypsin-conjugated NPs followed by analysis with LC–ESI-MS and successful MASCOT search demonstrated the applicability of the new heterogenous nano-structured biocatalyst. It could be shown that the amount of immobilized trypsin and its activity can be increased by a factor of 6 using a long hydrophilic spacer with simultaneous reduced auto-digestion and reduced digestion time. The applicability of the new trypsin bioreactor was proven by digestion of casein and identification of α- as well as κ-casein by subsequent MASCOT search.     

基于碳酸钙-金纳米粒子无机杂化复合物固定硫堇的新方法及其在过氧化氢传感器中的应用

通过静电作用,经碳酸钙-金纳米粒子(CaCO3-AuNPs)无机杂化复合物实现了电活性物质硫堇(Th)在金电极表面的有效固定.AuNPs静电吸附到CaCO3微球表面形成CaCO3-AuNPs无机杂化复合物,该杂化复合物具有微孔结构、大的表面积和好的生物相容性,使得Th的固定量和稳定性大大提高.探讨了Th修饰电极在过氧化...     

Carbosilane dendrons as stabilizing agents for the formation of gold nanoparticles

The synthesis and characterization of two new carbosilane dendrons functionalized in the focal point with a single thiol group is described. These molecules were used as stabilizing agents for the formation of gold nanoparticles. These materials were obtained by the reduction of hydrogen tetrachloroaurate phase-transferred into toluene in the presence of the carbosilane dendrons. The gold nanoparticle-cored dendrons (NCDs) were characterized by TEM, XPS, AFM, IR, UV, and NMR techniques. Average particle diameter ranged from 2.5 to 2.6 nm with narrow size distribution and remarkable stability; in particular, the elimination of the protecting shells to give naked gold, after NCDs deposition on a support, is more difficult using carbosilane dendrons than in the case of conventional dodecanethiol-protected gold nanoparticles.     

Amplified Electrochemical Immunosensor for Calmodulin Detection Based on Gold‐Silver‐Graphene Hybrid Nanomaterials and Enhanced Gold Nanorods Labels

Calmodulin (CaM) is an important intracellular calcium‐binding protein. It plays a critical role in a variety of biological and biochemical processes. In this paper, a new electrochemical immunosensing protocol for sensitive detection of CaM was developed by using gold‐silver‐graphene (AuAgGP) hybrid nanomaterials as protein immobilization matrices and gold nanorods (GNRs) as enhanced electrochemical labels. Electrode was first modified with thionine‐chitosan film to provide an immobilization support for gold‐silver‐graphene hybrid nanomaterials. The hybrid materials formed an effective matrix for binding of CaM with high density and improved the electrochemical responses as well. Gold nanorods were prepared for the fabrication of enhanced labels (HRP‐Ab₂‐GNRs), which provided a large capacity for HRP‐Ab₂ immobilization and a facile pathway for electron transfer. With two‐step immunoassay format, the HRP‐Ab₂‐GNRs labels were introduced onto the electrode surface, and produced electrochemical responses by catalytic reaction of HRP toward enzyme substrate of hydrogen peroxide (H₂O₂) in the presence of thionine. The proposed immunosensor showed an excellent analytical performance for the detection of CaM ranging from 50 pg mL^?1 to 200 ng mL^?1 with a detection limit of 18 pg mL^?1. The immunosensor has also been successfully applied to the CaM analysis in two cancer cells (HepG2 and MCF‐7) with high sensitivity, which has shown great potency for improving clinic diagnosis and treatment for cancer study.     

Synthesis and Characterization of Gold‐Nanoparticle‐Cored Dendrimers Stabilized by Metal–Carbon Bonds

Synthesis and characterization of gold‐nanoparticle‐cored dendrimers (NCDs), in which the dendrons are attached to the gold core through gold–carbon bonds, are described. Synthesis of these materials involved the simultaneous reduction of HAuCl₄ and a Fréchet‐type dendron with a diazonium group at the focal point, all in an organic solvent such as toluene. These materials possess a nanometer‐sized gold core surrounded by a shell of polyaryl ether dendrons, which are connected radially to the core. The NCDs were characterized by TEM, thermogravimetric analysis (TGA), and IR, UV, and NMR spectroscopic techniques. Average particle diameter of the NCDs ranged from 4.7 to 5.5 nm for the different generations. All NCDs exhibit the characteristic plasmon absorption of gold nanoparticles at 520 nm. Average numbers of dendrons per NCD in AuG_n were calculated using results from TGA and TEM studies. Multiple layering of the dendrons is proposed as a possible reason for the high dendron/NCD value.     

Immunosensors Based on Layer‐by‐Layer Self‐Assembled Au Colloidal Electrode for the Electrochemical Detection of Antigen

Colloidal Au particles have been deposited on the gold electrode through layer‐by‐layer self‐assembly using cysteamine as cross‐linkers. Self‐assembly of colloidal Au on the gold electrode resulted in an easier attachment of antibody, larger electrode surface and ideal electrode behavior. The redox reactions of [Fe(CN)₆]^4?/[Fe(CN)₆]^3? on the gold surface were blocked due to antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.0 with various concentrations of antigen at 37 °C for 30 min. Further, an amplification strategy to use biotin conjugated antibody was introduced for improving the sensitivity of impedance measurements. Thus, the sensor based on this immobilization method exhibits a large linear dynamic range, from 5–400 μg/L for detection of Human IgG. The detection limit is about 0.5 μg/L.