甲基丙烯酸/丙烯酰胺双单体共聚反蛋白石光子晶体的制备

以烧结后的二氧化硅光子晶体为模板,采用溶胶凝胶法向模板间隙填充以甲基丙烯酸(MAA)和丙烯酰胺(AM)为双功能单体,N,N’-亚甲基双丙烯酰胺(BIS)为交联剂的聚合物前驱液,制备了甲基丙烯酸/丙烯酰胺共聚(PMAM)双单体反蛋白石凝胶光子晶体.通过紫外可见光谱分析表明,反蛋白石结构的凝胶膜对pH响应范围在4.0～7.0之间.由于其不受离子强度的影响,除了可以作为pH传感器外,还可以作为金属离子及生物小分子等分子印迹光子晶体传感器的基体膜.     

二氧化钛反蛋白石薄膜的制备及其在化学传感器中的应用

用提拉成膜法将单分散295 nm聚甲基丙烯酸甲酯(PMMA)胶体微球自组装成蛋白石光子晶体膜. 在PMMA蛋白石光子晶体膜的空隙里填充15 nm二氧化钛纳米颗粒, 经500 ℃的处理除去PMMA膜板, 制备出大面积, 结构均一的二氧化钛反蛋白石光子晶体膜. 扫描电子显微镜(SEM)观察和X射线光电能谱(XPS)分析表明, 这种二氧化钛反蛋白石光子晶体薄膜是六方紧密堆积. 用这种二氧化钛反蛋白石光子晶体膜对溶液折射率的检测实验表明该传感膜分辨率可达0.01.     

乙基膦酸分子印迹光子晶体传感器的研究

本研究结合光子晶体与分子印迹技术,制备了一种新颖有机磷毒剂光学传感器——三维分子印迹光子晶体(3D-MIPCs)凝胶膜.采用聚甲基丙烯酸甲酯胶体小球为光子晶体自组装阵列模板,以甲基丙烯酸羟乙酯和N-异丙基丙烯酰胺为混合单体,乙二醇二甲基丙烯酸酯和N,N-亚甲基双丙烯酰胺为混合交联剂,正辛醇和乙腈混合溶液为溶剂,光聚得到印迹聚合物.该材料对乙基膦酸响应速度快、选择性高,其对目标分子的识别作用会导致衍射光谱图的改变.随着在EPA浓度从0.5 mmol/L增加到1.5 mmol/L的过程中,反射峰强度逐渐降低,降幅达到10％,并伴随明显红移.该材料为乙基膦酸检测提供了新的思路,在神经毒剂检测及监控等领域有应用前景.     

三联噻吩衍生物功能化SiO2反蛋白石光子晶体荧光薄膜的制备及应用

将单分散聚苯乙烯微球乳液与SiO₂溶胶均匀混合后, 于恒温恒湿条件下, 竖直沉积共组装制备得到蛋白石型光子晶体薄膜, 然后利用牺牲模板法制得SiO₂反蛋白石光子晶体薄膜. 该薄膜依次经过浓硫酸与过氧化氢混合液、 3-氨丙基三甲氧基硅烷的甲苯溶液、 三联噻吩的三氯甲烷溶液和硼氢化钠的甲醇溶液处理后, 得到三联噻吩衍生物功能化的SiO₂反蛋白石光子晶体. 结果表明, 制备得到的光子晶体薄膜在512 nm处有荧光发射, 经紫外辐射后荧光猝灭, 甲醛气氛下458 nm处又出现新的荧光发射峰. 在甲醛气氛下20 s即可观察到荧光发射, 空气氛围下可恢复, 10次循环仍可保持强的荧光发射, 可重复性良好. 以无反蛋白石光子晶体结构的三联噻吩衍生物的平滑膜与甲醛作用的体系作为参比, 以330和400 nm聚苯乙烯微球为模板制备的三联噻吩功能化反蛋白石光子晶体, 在甲醛气氛中发射的荧光分别增强47.5和78.6倍. 这是由于光子晶体光子禁带的红带边和蓝带边与荧光发射波长相重叠, 产生了慢光子效应, 极大地增强了发射的荧光强度.     

聚苯乙烯光子晶体高效制备

以苯乙烯单体为原料,采用一步聚合自组装法制备了具有蛋白石结构的聚苯乙烯(PS)光子晶体(1);以1为模板制备了反蛋白石结构的TiO2光子晶体(2)来验证1的有序性;探讨了1的制备机理。1和2的结构和形貌经IR,SEM和TEM表征。讨论了乳化剂SDS的用量对PS微球排列有序性的影响。结果表明,SDS用量在30 mg～74 mg时,PS微球的粒径不断减小,微球排列的有序性受到影响;当SDS用量为52 mg时,PS微球排列的有序性最佳,能够形成蛋白石结构的1;2在大范围内有序排列进一步证明了1的高度有序性。     

三聚氰胺分子印迹光子晶体水凝胶膜传感器的制备及应用

该文将光子晶体与分子印迹技术结合，制备了分子印迹光子晶体水凝胶膜（MIPHs）作为光学传感器，用于样品中三聚氰胺的快速识别检测。以三聚氰胺为模板分子，通过垂直沉降自组装、填充聚合、去除模板3个步骤，制备得到了反蛋白石结构的三聚氰胺MIPHs。扫描电子显微镜的形貌表征表明，MIPHs具有高度有序的三维大孔结构。该MIPHs作为光学传感器可以将三聚氰胺的分子特异识别过程转换成光学信号，在对目标分析物分析时具有选择性高、响应快、灵敏度高的优点。此外，可以根据MIPHs的颜色变化利用图像软件分析或裸眼识别的方式实现目标分析物快速识别。实验结果表明，在最优条件下，三聚氰胺浓度为10^-11~10^-6mol/L时，MIPHs的布拉格衍射峰位移从563 nm红移到608 nm，而对三聚氰胺的结构类似物没有明显响应。     

水相分子印迹光子晶体水凝胶传感器检测尿液中的痕量吗啡

结合水相分子印迹和光子晶体技术构建了吗啡分子印迹光子晶体水凝胶传感器,并成功用于生物样品中痕量吗啡的筛查.以吗啡为印迹模板,甲基丙烯酸为单体,乙二醇二甲基丙烯酸甲酯为交联剂,填充至二氧化硅光子晶体模板孔隙中进行共价型分子印迹聚合,在1％ HF溶液中除去光子晶体模板,并洗脱印迹模板分子,即可得到具有目标分子传感功能的分子印迹光子晶体水凝胶传感器.此传感器在水相环境中对吗啡分子的识别能力良好,可以在不需要标记的情况下,将目标分子的识别转变为衍射峰的位移,该光学信号通过传感器颜色的变化表现出来,吗啡浓度由10 pg/mL增加到1μg/mL过程中,衍射峰最大偏移达到38 nm,并且抗干扰能力强,检出限为0.1 μg/L,响应时间为40 s,可以重复使用.此检测平台不需要对样品进行处理,便可准确、灵敏、快速地检测复杂样品中的目标分析物.     

分子印迹纳米胶体阵列检测爆炸物的研究

以三硝基甲苯(TNT)为模板,丙烯酰胺为功能单体,采用乳液聚合法制备具有单分散性的TNT分子印迹胶体小球.通过垂直沉降法自组装,并用胶带将得到的具有蛋白石结构的分子印迹胶体阵列(MICA)固化.研究其在不同比例的甲醇/水溶液中的光学响应,并在最优检测环境下进行特异性吸附实验.实验表明,当甲醇/水的体积比为7∶3,TNT浓度为20 mmol/L时,反射峰红移近24 nm,为非印迹胶体阵列红移量的1.4倍,为TNT结构类似物的23倍.MICA在实现对光子晶体传感器制备简化的同时,提供了对TNT进行快速裸眼检测的可能性.     

硫化镉反蛋白石光子晶体制备及光解水制氢

对硫化镉反蛋白石结构光子晶体薄膜进行了可控合成,用巯基乙酸修饰的纳米晶和P(St-MMA-SPMAP)高分子小球共组装,成功地构筑了反蛋白石结构并用于可见光光解水产氢。结果表明,在可见光(λ≥420 nm)照射下,Cd S-310反蛋白石结构薄膜的光解水产氢性能比硫化镉纳米颗粒提高了一倍。这主要是因为等级孔结构反蛋白石光子晶体特性对催化剂的光催化性能的提升:首先,反蛋白石的周期性结构增加了光子在材料中的传播,提高了催化剂对太阳光的利用率;同时,大孔孔壁是由纳米颗粒堆积而成的,在反应中提供了更多的反应活性位点;此外,孔结构有利于物质的传输和分子的吸附。     

微波辅助快速制备核-壳型尿苷印迹聚合物及其在线富集应用研究

采用微波辅助加热,以尿苷为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,快速制备尿苷印迹聚合物,聚合时间大大缩短,仅为传统加热的1/8.采用红外光谱和扫描电镜对印迹聚合物进行表征,结果表明二氧化硅表面成功包覆尿苷印迹壳层;该印迹聚合物颗粒分散均匀,印迹壳层厚度约为100 nm.将该印...     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.