Ion-sieve properties of an inorganic gel loaded with some complex cations of cobalt(III) a radiochemical study

Distribution coefficients of a number of uni-, di-, tri- and quadrivalent metal ions have been determined on chromium ferrocyanide gel loaded with [Co(NH₃)₆]³⁺ and [Co(en)₃]³⁺ ions at 25 °C, and the observed K_d values are compared with those obtained on the unloaded exchanger in H-form. The gel is found to develop ion-sieve properties after being loaded with the complex cations. The variation in K_d values with the pH of Rb⁺, Cs⁺, Ti⁺ and Ag⁺ solutions has also been studied to understand the mechanism of their uptake.     

Metal adsorption properties of multi-functional PAMAM dendrimer based gels

Metal adsorption studies are getting important and there are many functional adsorbents developed recently. Here, we report the synthesis of multifunctional PAMAM G2 (polyamidoamine) possessing methacryl, amine, hydroxyl and phosphonate groups used in free radical curing gel formulations. UV curable gel is conducted in the presence of acrylamide, bisacrylamide, and polyethylene glycol diacrylate. Adsorption study of the resulting novel sorbents (gels) are carried out with a series of metals. Through a comprehensive study, structure–property relationship of the series gels is conducted by using different amount of amine, hydroxyl, and/or phosphonate ester groups on the PAMAM G2. Selected metals are Cr³⁺, Fe³⁺, Ni²⁺, Cu²⁺, Ag⁺, and Cd²⁺ within a series of hard, intermediate, and soft ionic species. Adsorption study is carried out in pure water environment at neutral pH. Metal ions removal percentages and adsorption capacities of gel adsorbents are calculated by using atomic absorption spectroscopy. There is relationship between the overall functional groups presence in gel formulation and swelling densities for removing the metal ions. Introducing dendrimer into the gel formulation enhanced the metal ions adsorption against to Bare GEL formulation which do not possess dendrimer units. Consequently, the maximum removal efficiency has been obtained for Cr³⁺ and Fe³⁺.     

Studies on the ion-exchange behaviour of chromium ferrocyanide

The sorption of univalent, bivalent and trivalent ions has been studied on chromium ferrocyanide gel. The studies reveal a high sorption capacity for Cs⁺, Tl⁺, Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺ and Th⁴⁺. The sorption of monovalent cations show purely ion-exchange mechanism while the uptake of bivalent and trivalent cations is non-equivalent in nature. Single elution of Rb⁺, Cs⁺ and Tl⁺ has been performed from the columns of this exchanger and the recovery is almost complete in all the cases. Cu²⁺ and Ag⁺ get completely adsorbed on the gel column and their elution is not possible probably due to the formation of some new solid phases. Depending on the K_d values of the metal ions, a large number of separations of radiochemical as well as analytical importance can be performed on the columns of this exchanger material.     

A Novel Polymeric Chemosensor: Dual Colorimetric Detection of Metal Ions Through Click Synthesis

A highly colored polystyrene derivative bearing side chain chromophores composed of dialkylanilino donor and cyano‐based acceptor groups, prepared by atom‐economic click postfunctionalization, displays the dual colorimetric detection behavior of several metal ions based on the specific interactions with different nitrogen atoms. Hard to borderline metal ions, such as Fe³⁺, Fe²⁺, and Sn²⁺, are always recognized by the dialkylanilino nitrogen atom, resulting in a decrease in the charge‐transfer (CT) band intensity of the donor–acceptor chromophores. On the other hand, the recognition site of a soft metal ion of Ag⁺ is the cyano nitrogen atom due to the readily formed multivalent coordination, which produces a bathochromic shift of the CT band.     

Electron capture dissociation and collision-induced dissociation of metal ion (Ag+, Cu2+, Zn2+, Fe2+, and Fe3+) complexes of polyamidoamine (PAMAM) dendrimers

The electron capture dissociation (ECD) and collision-induced dissociation (CID) of complexes of polyamidoamine (PAMAM) dendrimers with metal ions Ag⁺, Cu²⁺, Zn²⁺, Fe²⁺, and Fe³⁺ were determined by Fourier transform ion cyclotron resonance mass spectrometry. Complexes were of the form [PD + M + mH]⁵⁺ where PD = generation two PAMAM dendrimer with amidoethanol surface groups, M = metal ion, m = 2−4. Complementary information regarding the site and coordination chemistry of the metal ions can be obtained from the two techniques. The results suggest that complexes of Fe³⁺ and Cu²⁺ are coordinated via both core tertiary amines, whereas coordination of Ag⁺ involves a single core tertiary amine. The Zn²⁺ and Fe²⁺ complexes do not appear to involve coordination by the dendrimer core.     

Stability of transition metal complexes with sulfonated polymers

Stability constants of macromolecular metallocomplexes of transition metal ions (Ag⁺, Cu²⁺, Ni²⁺, Fe³⁺) with sulfonated polymers in water and aqueous HCl and NaCl solutions were determined from quenching by transition metal ions of the luminescence of macromolecules labeled with luminescent groups.     

Conductance and Thermodynamic Study of the Interaction of Mixed Oxygen–N2–Donor Macrocycles with Ag(I), Ni(II) and Fe(III) in Acetonitrile Solutions

The thermodynamic stabilities of Ag⁺, Ni²⁺ and Fe³⁺with diaza-crown ethers have been determinedconductometrically in acetonitrile at temperatures of 293, 298, 303 and 308 K.Both the size of the macrocyclic ring and the hard and soft acidand base (HSAB) character of the metal ions influence the relative stabilities of the complexes. For the metal ions with diazacrown ethers the values of log K_f for the 1 : 1 complexesfollow the order Ag⁺ > Ni²⁺ > Fe³⁺in accordance with Pearson's principle of HSAB character. The enthalpy and entropy of complexation were determined from the temperature dependence of the complexationconstants. The complexation process is entropy governed.     

The coordination chemistry of graphene oxide: Interactions with metal ions in water

Interactions of graphene oxide with Ag⁺, Cu²⁺, Fe²⁺, Fe³⁺, and Bi³⁺ ions were studied. The minimum (threshold) ion concentrations required for the interaction with graphene oxide to occur were deter-mined in a series of experiments. A possible model of the interaction between the metal ions and the oxygen-containing groups of graphene oxide was proposed.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

Fourier transform infrared spectroscopy study of the effect of pH on anion and cation adsorption onto poly(acrylo‐amidino diethylenediamine)

The role of hydrogen bonding in the chemistry of transition‐metal complexes remains a topic of intense scientific and technological interest. Poly(acrylo‐amidino diethylenediamine) was synthesized to study the effects of hydrogen bonding on complexes at different pHs. The polymer was synthesized through the coupling of diethylene triamine with polyacrylonitrile fiber in the presence of AlCl₃ · 6H₂O addition. The adsorption capacity of this polymer was 11.4 mequiv/g. The ions used for the adsorption test were CrO, PO, Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺. All experiments were confirmed with Fourier transform infrared. In the study of anion adsorption, at low pHs, only ionic bonds existed, whereas at high pHs, no bonds existed. However, in the middle pH region, both ionic bonds and hydrogen bonds formed between poly(acrylo‐amidino diethylenediamine) and the chromate ion or phosphate ion. When poly(acrylo‐amidino diethylenediamine) and metal ions (Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺) formed complexes, a hydrogen‐bonding effect was not observed with Fourier transform infrared. The quantity of metal ions adsorbed onto poly(acrylo‐amidino diethylenediamine) followed the order Ag⁺ > Cu²⁺ > Fe²⁺ > Ni²⁺. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2010–2018, 2004     

Graft copolymerization to cellulose by the metallic ion–hydrogen peroxide initiator system

The decomposition of hydrogen peroxide and the graft copolymerization of methyl methacrylate has been investigated by use of cellulose samples adsorbing various metallicions. Metallic ions generally accelerate the decomposition of hydrogen peroxide, increase the number of grafts, and lower the average molecular weight. However their effects are much influenced by the range of pH values. It is clear that the amount of grafts formed is not necessarily proportional to the amount of decomposed hydrogen peroxide and is dependent upon a function peculiar to each metallic ion. The effective metallic ions in the neutral system were Cu²⁺, Ag⁺, Fe²⁺, Co²⁺, Cr³⁺, and Zn²⁺. The effects of Ce³⁺, Mg²⁺, Hg³⁺, Cd²⁺, Ni²⁺ and Mn²⁺ were either negligible or negative. Comparative studies on various conditions confirmed that Fe²⁺ in the neutral system gives graft copolymer having a minimum average molecular weight and the greatest number of grafts.     

Separation and Recovery of Some Metal Ions Using Pan Sorbed Zinc Silicate as Chelating Ion Exchanger

Abstract

A new inorganic ion exchanger zinc silicate has been synthesized. Its properties such as ion exchange capacity, heat effect and stability etc. have been studied. Sorption of PAN over zinc silicate formed a chelate ion exchanger which showed greater selectivity for some metal ions especially for Cu²⁺, Ni²⁺, Co²⁺, Fe³⁺, Ag⁺, Ag³⁺ and Pt⁴⁺. Selectivity has been determined on the basis of distribution coefficients of these metal ions. Separations of Pt(IV) from Fe(III), Au(III) from Fe(III), Ag(I) from Cu(II) and Au(III) from Cu(II) have been reported. The recovery of Pt(IV) and Au(III) from dilute solutions has also been studied.     

2H1NA/β-cyclodextrin inclusion complex: Preparation,characterization and chemosensory application for detecting Ag+

The inclusion complex of 2-hydroxy-1-naphthoic acid (2H1NA) with β-cyclodextrin (β-CD) has been investigated using UV-visible and fluorescence spectral techniques in liquid states, FTIR, NMR, XRD and SEM techniques in solid state, molecular docking techniques in virtual states. The binding constants of for the formation of 1:1 2H1NA:β-CD inclusion complex is estimated by UV-visible and fluorescence spectral techniques. The chemosensory power of 2H1NA:β-CD complex was investigated thoroughly for various metal cations and we found the emission of complex showed a drastic increase in the intensity for Ag⁺. Competition experiments of 2H1NA:β-CD complex with Ag⁺ in presence of other metal ions (Na⁺, K⁺, Hg⁺, Al²⁺, Ca²⁺, Ba²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Sn²⁺, Ti²⁺, Zn²⁺, Cr³⁺, Fe³⁺) showed that no significant variation was found in the fluoresce intensity of 2H1NA:β-CD complex upon adding all other cations. The linearity range, LOD and LOQ are determined from the selectivity and sensitivity studies for Ag⁺. Our result suggests that the 2H1NA:β-CD inclusion complex would be promising material for developing solid state sensory device for sensing Ag⁺.     

Highly Effective Fluorescent Sensor for Hg2+ in Aqueous Solution

A new anthracene fluorophore senses Hg²⁺ selectively in aqueous solution. Among the metal ions examined, fluorescent chemosensor 1 shows selective large CHEQ effects with Hg²⁺ and Ag⁺ at pH 7.     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Solid‐Contact Potentiometric Sensor Based on Polyaniline and Unsubstituted Pillar[5]Arene

A novel potentiometric sensor based on screen‐printed carbon electrode covered with electropolymerized polyaniline (PANI) and unsubstituted pillar[5]arene as ionophore has been developed and tested in potentiometric measurements of pH and metal ions. The introduction of pillar[5]arene improved the reversibility of the pH response in the range from 2.0 to 9.0 with the slope of 45 mV/pH. Among metal cations, the response to Fe³⁺ and Ag⁺ ions was referred to PANI redox conversion whereas the signal toward Cu²⁺ in the range from 1.0×10^?6 to 1.0×10^?2 M (limit of detection (LOD) 3.0×10^?7 M) to specific interaction with the macrocycle.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Chelation ion-exchange properties of salicylic acid-urea-formaldehyde copolymers

Chelation ion-exchange properties of copolymers prepared from salicylic acid, urea and formaldehyde by condensation in presence of acid catalyst were studied for Cu²⁺, Fe³⁺, UO²⁺, Mn²⁺,Zn²⁺ and Co²⁺ ions. A batch equilibration method was adopted to study the selectivity of metal ion uptake. This method involved the measurement of distribution of a given metal between the copolymer sample and a solution containing the metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for UO₂ ²⁺, Cu²⁺ and Fe³⁺ ions than Mn²⁺, Co²⁺ and Zn²⁺ ions.     

Multistimuli‐Responsive,Moldable Supramolecular Hydrogels Cross‐Linked by Ultrafast Complexation of Metal Ions and Biopolymers

A new type of multistimuli‐responsive hydrogels cross‐linked by metal ions and biopolymers is reported. By mixing the biopolymer chitosan (CS) with a variety of metal ions at the appropriate pH values, we obtained a series of transparent and stable hydrogels within a few seconds through supramolecular complexation. In particular, the CS–Ag hydrogel was chosen as the model and the gelation mechanism was revealed by various measurements. It was found that the facile association of Ag⁺ ions with amino and hydroxy groups in CS chains promoted rapid gel‐network formation. Interestingly, the CS–Ag hydrogel exhibits sharp phase transitions in response to multiple external stimuli, including pH value, chemical redox reactions, cations, anions, and neutral species. Furthermore, this soft matter showed a remarkable moldability to form shape‐persistent, free‐standing objects by a fast in situ gelation procedure.     

Multistimuli‐Responsive,Moldable Supramolecular Hydrogels Cross‐Linked by Ultrafast Complexation of Metal Ions and Biopolymers

A new type of multistimuli‐responsive hydrogels cross‐linked by metal ions and biopolymers is reported. By mixing the biopolymer chitosan (CS) with a variety of metal ions at the appropriate pH values, we obtained a series of transparent and stable hydrogels within a few seconds through supramolecular complexation. In particular, the CS–Ag hydrogel was chosen as the model and the gelation mechanism was revealed by various measurements. It was found that the facile association of Ag⁺ ions with amino and hydroxy groups in CS chains promoted rapid gel‐network formation. Interestingly, the CS–Ag hydrogel exhibits sharp phase transitions in response to multiple external stimuli, including pH value, chemical redox reactions, cations, anions, and neutral species. Furthermore, this soft matter showed a remarkable moldability to form shape‐persistent, free‐standing objects by a fast in situ gelation procedure.