浸泡法和旋涂法对偶氮聚电解质静电吸附自组装膜结构及性能的影响

利用浸泡和旋涂静电吸附自组装技术制备了含有偶氮生色团的聚电解质薄膜,比较了两种方法在自组装膜生长机理、膜结构以及膜光学性能方面的差异.利用紫外光谱和椭偏仪检测自组装膜的生长情况,利用原子力显微镜对膜表面结构进行了表征,并用偏振激光在膜表面进行了写光栅实验.结果表明,采用浸泡法和旋涂法都可以制备出表面光滑均匀的含偶氮生色团的聚电解质自组装膜.但是浸泡法自组装膜的生长速度要比旋涂法快.在自组装膜厚度较小的情况下,旋涂法得到的自组装膜可以写出明显的光栅而浸泡法不可以.随着自组装膜厚度的增加,两种方法得到的自组装膜都可以写出明显的光栅.这些结果说明浸泡法自组装膜内部聚电解质分子的层间穿插比较严重,而旋涂法自组装膜内分子穿插要弱得多.     

分子自组装技术及其在发光器件制备上的应用

介绍了分子自组装技术的原理、特点及过程。重点从自组装单层膜和逐层自组装膜两方面介绍自组装技术在制备发光器件方面的应用，并综述了影响自组装薄膜性能的因素。     

硫醇自组装膜对金电极上吡咯电化学聚合的影响

用电化学聚合法在多种烷基硫醇自组装膜修饰金电极上制备了聚吡咯.通过计时安培法、循环伏安法和交流阻抗技术研究了自组装膜的烷基链长和端基功能团对吡咯聚合过程和性质的影响.当自组装膜较完美时,聚吡咯沉积在自组装膜表面;而当自组装膜有一定缺陷时,吡咯在针孔处成核,然后继续生长并完全覆盖在自组装膜表面.研究结果表明,烷基硫醇的链越短,吡咯聚合越容易;疏水的烷基硫醇自组装膜有利于聚吡咯在电极表面的生长.     

极化时间对含疏基席夫碱自组装膜的影响

自组装技术可以构造分子水平的高度有序体系 ,因而自组装膜的研究日益增多 ,尤其对摩擦、腐蚀、异相电子转移等涉及到界面方面的问题 ,自组装膜显得尤为重要[1～ 4 ] 。文献上对不含活性基团的硫醇自组装膜研究报道较多 ,而对含活性基团的自组装膜的研究较少 ,用交流阻抗方法研究极化时间对含活性基团自组装膜的影响未见报道 ,尤其对含席夫碱特性 C N 活性基团的自组装膜。本文在对带有巯基的席夫碱自组装膜初步研究的基础上 [5] ,利用交流阻抗技术研究了在一定极化电位下 ,极化时间对此自组装膜的影响。本工作对进一步研究极化电位对自组…     

正、叔十二烷基硫醇在铜表面上自组装膜测试

研究了正、叔十二烷基硫醇在铜表面上的自组装及混合自组装成膜情况,并利用交流阻抗和极化曲线电化学方法测试了正、叔十二烷基硫醇在铜表面上自组装膜及混合自组装膜对铜的耐腐蚀性,考察了正十二烷基硫醇自组装膜质量与正十二烷基硫醇溶液的浓度及组装时间的关系。研究结果显示,混合自组装膜的质量及其对铜的耐腐蚀性比仅组装正或叔十二烷基硫醇均有很大的提高。     

碳纳米管/超支化重氮盐自组装膜的制备及性能研究

利用静电吸附自组装技术将酸化处理后的单壁碳纳米管(SWNTs)与超支化重氮盐(DAS)组装成多层膜.利用紫外光谱、椭偏仪、原子力显微镜、扫描电镜、拉曼光谱等对自组装膜的生长过程、膜厚增长、自组装膜表面形貌以及纳米管在膜中的存在状态等进行了检测,并利用纳米压痕仪测试了自组装膜的硬度和弹性模量.研究结果表明,SWNTs与DAS不仅发生了静电吸附,而且还发生了化学交联.同时碳纳米管均匀分散在自组装膜中.这两种因素的共同作用使得自组装膜表现出良好的纳米力学性能,硬度达到2.0GPa左右,弹性模量达到10.0GPa左右,而且可以从基底上剥离下来成为独立支撑膜.     

辣根过氧化物酶自组装多层膜结构形貌与活性的研究

用分子沉积自组装作制备了阳离子化和阴离子化的辣根过氧化物酶自组装膜；并用原子力显微镜（AFM）研究了不同离子化辣根过氧化物酶单层及多层自组装膜的形貌结构与自组装膜的活性变化关系。结果表明：阴离子化的辣根过氧化物酶自组装膜的表面形貌比较粗糙，均方根粗糙度（RMS）及酶分子粒径较大，且组装膜的活性比较大。     

在N,N-二甲基甲酰胺/水混合溶剂中制备偶氮聚电解质自组装膜

利用静电吸附逐层自组装方法在有机溶剂N,N二甲基甲酰胺(DMF)和H2O的混合介质中制备非水溶性偶氮聚电解质自组装多层膜.研究了DMF和H2O的配比对自组装膜生长、结构与表面形态的影响.结果表明,DMFH2O的混合溶剂是非水溶性偶氮聚电解质自组装的理想介质,二者之间的配比对自组装膜的生长速度,膜的结构以及表面形态均有显著影响.随着混合溶液中DMF含量的升高,自组装膜的生长速度逐渐下降但线形生长关系越来越好,所得自组装膜中偶氮生色团的H聚集程度逐渐下降,而且自组装膜的表面越来越平整.     

偶氮苯衍生物-β-环糊精包合物的自组装行为

研究了4-N（2’-巯基-乙基）羧基酰胺偶氮苯（Azo）与β-环糊精（β-CD）形成的包合物在金表面上的自组装行为．X射线光电子能谱（XPS）结果证实,Azo和Azo与β-CD形成的包合物均可在金表面上自组装形成单分子层膜．在包合物形成的自组装膜中,Azo与β-CD的摩尔比约为1：1．Azo自组装膜的电化学反应表现速率常数（Kobs）随组装时间的延长而明显减小,反映出自组装膜的排列随时间延长而趋于更加致密,从而抑制了偶氮苯基团的电化学诱导构型转化,降低了其电活性．而Azo与β-CD包合物自组装膜的Kobs值随组装时间变化不大,在组装76h以后,包合物自组装膜的Kobs比单纯偶氮苯自组装膜的Kobs高2个数量级以上．表明环糊精能够将偶氮苯分子隔开,从而抑制了偶氮苯在自组装膜中的聚集作用,有效地提高其电化学活性．     

铜表面烯丙基硫脲自组装膜的电化学行为

为阐明金属Cu在含稀丙基硫脲NaCl溶液中的腐蚀行为和规律,利用自组装技术在铜表面制备了烯丙基硫脲自组装膜,并在中性氯化钠体系中测试了该自组装膜的电化学行为和缓蚀效率.电化学测定表明,烯丙基硫脲自组装膜对阴极过程有明显的抑制,并且发现自组装膜的保护性质与腐蚀电位、烯丙基硫脲的浓度和溶液中Cl-浓度密切相关.烯丙基硫脲的...     

Review of Analytical Methods for Atmospheric Oxidants Measurements

Abstract

Instrumental and manual methods currently available for the measurement of atmospheric oxidants are surveyed. Techniques used in the United States are emphasized and their advantages and disadvantages are discussed. Commercial systems are evaluated in terms of general operating principles rather than of specific instruments. The ability of these techniques to meet the measurement requirements defined by U.S. Federal air quality oxidant criteria are discussed. Alternative chemical techniques that may have some advantages over the neutral, buffered KI procedure are discussed. Also some attractive, alternative instrumental procedures that are ozone-specific are presented. These systems are based on chemiluminescence and ultraviolet absorption photometry. Electrochemical and colorimetric methods for total oxidant measurements are compared. Finally, some data are presented on relationships of ozone and total oxidants.     

Densities,speeds of sound,excess volumes and viscosities of binary mixtures of mtbe with tetralin and decalin at 303.15 k

Measurements of densities, speeds of sound, excess volumes and viscosities of binary mixture of methyl tert-butyl ether with tetralin and decalin are reported at 303.15?K over the entire range of composition. Excess volumes are measured using batch dilatometer technique. Sound speeds are obtained using ultrasonic interferometer. Densities are computed from excess volume data. Isentropic compressibilities are derived from density and sound speed data. Speeds of sound are evaluated on the basis of Jacobson's free length theory and Schaff's collision factor theory. The predicted values are in good agreement with the experimental results. The viscosity data are analysed on the basis of corresponding states approach. Excess volumes and deviation in isentropic compressibilities are negative and deviation in viscosities are positive over the entire composition range. The experimental results are discussed in terms of possible molecular interactions between unlike molecules.     

若干含多硫基的配合物的合成方法及结构特征

本文综述了近年来我们合成的十二种多硫基的配合物，这些配合物含有Ｓ＾２－２，Ｓ＾２－４，Ｓ＾２－５，Ｓ＾２－６，Ｓ＾２－７等多硫革配体，总结了这些配合物中的金属配位构型，比较了各种多硫基的Ｓ－Ｓ键长及有关键角，归纳了配合物外光谱，并阐述了其中几个配合物与ＮＨ２ＮＨ２的反应性能。     

Contactless conductivity detection for microfluidics: designs and applications

Different methods for construction of contactless conductivity detectors (CCD) for microchip electrophoresis device are described in this review. This includes three main schemes of CCD for microchips, such as (i) the detection electrodes are placed along the microchannel from outside of the microchip and they are insulated from the channel by the cover lid of microchip device; (ii) the electrodes are placed across of the microchannel in the same plane and they are insulated by thin separation channel walls and (iii) electrodes are buried in widened part of microchannel and they are insulated from solution by ultrathin layer of silicon carbide. Specific issues related to the CCD on microfluidics are discussed, such as an influence of shape and magnitude of ac voltage and placement of electrodes and their insulation. Various applications for security, pharmacological, bioassays and food analysis purposes are described.     

纳米SiO2的表面处理及其在聚合物基纳米复合材料中的应用进展

简要介绍了纳米二氧化硅(SiO2)粒子的制备方法、结构和特性,对近年来国内外纳米SiO2的表面处理方法及聚合物/SiO2纳米复合材料的制备方法进行了阐述,并针对不同改性方法和制备方法的特点加以分析比较;讨论了SiO2粒子的分散机理和增强机理,并对未来的研究内容及方向提出展望。     

Inorganic electrides

Inorganic electrides are a novel kind of ionic compounds in which the anions are electrons confined in a complex array of cavities or channels and the cations are nanoscale arrays of alkali metal ions that provide charge balance. In electrides the donated electron behaves like a low-density correlated electron gas, whereby the dimensionality of the electron gas and its electronic and magnetic properties are determined by the topology of the cavities in the host matrix. Unlike traditional electrides, in which alkali cations are encapsulated within an organic cage, inorganic electrides are thermally stable. The current inorganic electrides based on alkali metal loaded zeolites can be designed as useful reduced-dimensionality materials. Inorganic electrides are powerful reducing agents, and they are able to reduce small aromatic molecules to the radical anions within the channels of the zeolite.     

2D/3D-QSAR comparative study on mutagenicity of nitroaromatics

As the key techniques in predictive toxicology, the goal of quantitative structure-activity relationships (QSARs) is to explore the mechanism of toxic action based on the molecular structures of pollutants and to develop quantitative models for predictive…     

微波波谱方法与应用研究进展

综述了微波波谱法及其应用研究进展,阐述了微波波谱法的基本原理及仪器构造。对微波波谱法在分子结构及构象分析、弱相互作用体系的研究、分析化学、星际物质的探测等方面的应用进行了综述。并展望了微波波谱方法未来的发展趋势。     

Alternate multi-layered adsorption of macro-cations and -anions on the colloidal spheres. Influence of the deionization of the complexation mixtures with coexistence of the ion-exchange resins

The alternate multiple adsorption layers of macrocations and macroanions on the surfaces of colloidal spheres, in which the complexation mixtures are deionized with ion-exchange resins are studied with help of the electrophoretic light-scattering, dynamic light-scattering and transmitted electron-microscopy techniques. The results are compared with those without resins. Colloidal silica spheres (110 nm in diameter) and monodispersed polystyrene spheres (220 nm) are used as colloidal spheres. The macrocations used are poly (4-vinyl-N-n-butyl pyridinium bromide) and poly (allylamine hydrochloride). Sodium poly (styrene sulfonate) and sodium polyacrylate are used as macroanions. The macroion-colloid complexations are formed firmly when the complexation suspensions are deionized with the resins.     

Synthesis and structure of built-up organic macromolecules containing helicene

Built-up macromolecules are acyclic molecules with molecular weights of several thousand daltons, which are synthesized by connecting small molecular units using stepwise methods. The chemical study of built-up macromolecules reveals some noteworthy properties that are different from those of conventional biological and synthetic macromolecules. A characteristic feature of built-up organic macromolecules is that their structures and properties are discontinuous at a certain molecular weight. For such macromolecules, variation in the small molecular units and the formation of cyclic structures substantially affect the structure and properties. The built-up organic macromolecules obtained by connecting helicenes with amide, acetylene, and amine groups are discussed in this paper. Some chiral built-up macromolecules are linked by covalent bonds, and the effects of linking on the structure are compared.