Preparation and polymerization mechanism of dihydroxy-capped PCL,poly(CL-b-PEG-b-CL) and poly(DTC-b-CL-b-DTC)

PCL possesses a wide range of medical applications, such as tissue engineering and controlled drug release, because of its good biodegradability and miscibility. In order to extend the use of PCL, researchers have been exploring its structural and chemica…     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Synthesis and characterization of aba-type block copolymer of poly(ϵ-caproplactone) with poly(ethylene glycol), by mean of activation end groups

Poly(?-caprolactone)-b-poly(ethylene glycol)-b-poly(?-caprolactone) (PCL-b-PEG-b-PCL) triblock copolymer were synthesized by mean anionic activation of the hydroxyl end groups of poly(ethylene glycol) in presence of diphenylmethylsodium. Copolymers were characterized by SEC, FT-IR and ¹H-NMR spectroscopy, TGA and DSC. Size exclusion chromatographic analysis of obtained copolymers indicated incorporation of CL monomer into PEG without formation of PCL homopolymer. Characterization by FT-IR and ¹H NMR spectroscopy of the resulting polymeric products, with respect to their structure, end-groups and composition, showed that they are best described as ester-ether-ester triblock copolymers, whose compositions can be adjusted changing the feeding molar ratio of PEG to CL. The thermal stability of triblock copolymers was less that PEG precursor, but higher that PCL homopolymer. Analysis by mean DSC showed that all copolymers were semi-crystalline and their thermal behavior depending on their composition.     

Enzymatic synthesis of poly(α-ethyl β-aspartate) by poly(ethylene glycol) modified poly(aspartate) hydrolase-1

We recently discovered that poly(aspartate) (PAA) hydrolase‐1 from Pedobacter sp. KP‐2 has a unique property of specifically cleaving the amide bond between β‐aspartate units in thermally synthesized PAA (tPAA). In the present study, the enzymatic synthesis of poly(α‐ethyl β‐aspartate) (β‐PAA) was performed by taking advantage of the substrate specificity of PAA hydrolase‐1. No polymerization of diethyl L ‐aspartate by native PAA hydrolase‐1 occurred because of the low dispersibility of the enzyme in organic solvent. Poly(ethylene glycol) (PEG) modification of the enzyme improved its dispersibility and enabled it to polymerize the monomer substrate. MALDI‐TOF MS analysis showed that the synthesized polymer was observed in the range of m/z = 750–2 500. This analysis also revealed that the polymer was composed of ethyl aspartate units, containing either an ethyl ester or a free carboxyl end group at its carboxyl terminus. ¹H NMR analysis demonstrated that the synthesized polymer consisted of only β‐amide linkages. Thus, the present results indicate that PAA hydrolase‐1 modified with PEG is useful for the synthesis of β‐PAA due to its unique substrate specificity and good dispersibility in organic solvent.

     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

Synthesis and characterization of poly(styrene/α-t-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Polystyrene microspheres with polyglycidol (polyGL) in a surface layer were synthesized in batch radical emulsifier-free emulsion copolymerizations of styrene and surfmers, α-t-butoxy-ω-vinylbenzyl-polyGL macromonomers (VB-polyGL). Macromonomers with number-average molecular weight Mˉ _n=950 (VB-polyGL950) and Mˉ _n=2700 (VB-polyGL2700) were used for these polymerizations. In all syntheses the initial concentrations of styrene and initiator (K₂S₂O₈) were constant. The initial macromonomer-to-styrene ratios were varied from 1.10 × 10⁻³ to 1.64 × 10⁻² mol/mol and from 3.46 × 10⁻⁴ to 3.47 × 10⁻³ mol/mol for VB-polyGL950 and VB-polyGL2700, respectively. The diameters of microspheres obtained were smaller for the syntheses with higher concentrations of macromonomers. Syntheses with VB-polyGL950 yielded microspheres with number-average diameters (Dˉ _n) from 216 to 900 nm and with a bimodal diameter distribution. The number-average diameters of microspheres obtained with VB-polyGL2700 varied from 220 to 650 nm, depending on the initial concentration of macromonomer. Their diameter distributions were monomodal, with a diameter polydispersity parameter (ratio of weight-average and number-average diameters) in the range 1.007≤Dˉ _w/Dˉ _n≤1.022. For each type of microsphere the fraction of polyGL in a surface layer and the surface concentration of sulfate anions were determined. The fraction of polyGL in the surface layer was related to the initial monomer composition in the polymerizing mixture. Adsorption of human serum albumin onto surfaces of some poly(styrene/VB-polyGL) microspheres was up to 10 times lower than for the polystyrene microspheres obtained in a similar emulsifier-free emulsion polymerization of styrene. Received: 26 September 2000/Accepted: 19 February 2001     

Preparation and characterization of microspheres based on blend of poly(lactic acid) and poly(ɛ-caprolactone) with poly(vinyl alcohol) as emulsifier

In this paper, microspheres were prepared by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymer such as blend of poly (lactic acid) (PLA) and poly(?-caprolactone) (PCL) with certain compositions and characteristics was used to prepare the microspheres with poly(vinyl alcohol) (PVA) as an emulsifier. This study observed the microspheres particle’s size distribution at various concentrations of PVA (1%, 1.5%, 2%, and 2.5% PVA). The PVA volume variations effects during the process (50, 100, 150, 200, and 250 mL) were also observed. The blend of PLA and PCL is formed only by physical interaction between them. This can be seen from the FTIR spectrum which shows both PLA and PCL component. The microspheres physical size and appearance were observed by optical microscope (MO). The overall results of this study showed that the formula which used 50–150 mL of 2.5% polyvinyl alcohol produced the microspheres with the most uniform size distribution.     

Synthesis and characterization of allyl functionalized poly(α-hydroxy)acids and their further dihydroxylation and epoxidation

In this study, the synthesis of an allyl functionalized aliphatic polyester and the subsequent oxidation of the double bonds was investigated. Allylglycolide (3-allyl-1,4-dioxane-2,5-dione) was synthesized and its homopolymer and copolymers with l-lactide were prepared by ring opening polymerization in the melt using benzyl alcohol and SnOct₂ as initiator and catalyst, respectively. The polymerizations proceeded with high yields and conversions and good control over molecular weights and copolymer composition. The obtained polymers were amorphous materials and their T_g increased with increasing lactide content. Dihydroxylation of the double bonds in poly(allylglycolide) and copolymers with lactide was attempted with osmiumtetroxide/4-methylmorpholine-4-oxide (OsO₄/NMO). However, particularly the polymers rich in allylglycolide could not be isolated after dihydroxylation because they likely underwent degradation during workup. Optimizing the reaction conditions gave partially dihydroxylated copolymers only for copolymers with high lactide content (50 and 75 mol%) with a conversion of the double bonds of only ∼60%. GPC analysis showed that chain scission had occurred during the dihydroxylation reaction and/or workup.The allyl groups of poly(allylglycolide) homopolymers and copolymers with lactide were oxidized using m-chloroperoxy benzoic acid (mCPBA) to yield the corresponding epoxidated polymers in high yield. NMR analysis showed that conversion of the double bonds to epoxides was quantitative, whereas GPC analysis showed that the epoxidation was not associated with chain scission. All epoxidated polymers were amorphous materials with a T_g depending on the composition.     

Thermal behavior of poly(α-n-alkyl β-L-aspartate)s

A series of poly(-n-alkyl -L-aspartate)s (n being the number of carbon atoms in the linear alkyl side chain, withn=1, 2, 4, 6, 8, 12, 18 and 22), was studied by differential scanning calorimetry and thermogravimetric analysis. The effect of the length of the alkyl group on thermal properties such as stability, melting and crystallization of side chains, was investigated. For the polymers with n12, two endothermic peaks at T₁ and T₂ were detected separating three distinct phases A, B and C. The peak at T₁ corresponds to the melting of the crystallized paraffinic side chains (transition A-B), and the peak: at T₂ may be attributed to a transition (B-C), implying a liquid crystal phase.This work has been supported by DGICYT PB-93-0960 and PB-93-1241. F.L.-C. acknowledges financial assistance from the Venezuelan institutions Universidad de Los Andes and Fundayacucho.     

Thermal degradation of two classes of block copolymers based on poly(lactic-glycolic acid) and poly(ϵ-caprolactone) or poly(ethylene glycol)

Thermodegradative investigations of two classes of multi-block copolymers containing poly(D,L-lactic-glycolic acid) (PLGA) and either poly(ethylene glycol) (PEG) or poly(ϵ-caprolactone) diol-terminated (PCDT) segments were performed. In particular, the influence of the type and length of the segments as well as of the molar ratio between the D,L-lactic acid (LA) and glycolic acid (GA) residues was investigated at 180°C in air by viscometry, FT-IR analysis and isothermal thermogravimetry. The thermal oxidative degradation of these materials is largely affected by the LA/GA ratio, a higher LA content generally imparting higher stability. The FT-IR analysis suggests that, depending on the composition of the PLGA segments, degradative processes are triggered which can lead to a preferential degradation of the blocks.     

The endothermic “annealing peak” of poly(phenylene sulphide) and poly(ethylene terephthalate)

The appearance of an endothermic annealing peak in semicrystalline poly(phenylene sulphide) and semicrystalline poly(ethylene terephthalate) after annealing at or above the cold-crystallization temperature is investigated by temperature-modulated differential scanning calorimetry, thermo-mechanical analysis and dynamic-mechanical analysis. The results indicate relaxation processes in the interlamellar amorphous phase, which is in a strongly constrained state after cold crystallization. During the annealing treatments rearranging processes take place. These processes result in a separation of the amorphous phase into an interlamellar relaxed and a “pseudo-crystalline” phase. Received: 27 October 1998 Accepted in revised form: 19 January 1999     

Mechanistic analysis and thermochemical kinetic simulation of the products from pyrolysis of poly(α-methylstyrene), especially the unrecognized role of phenyl shift

Mechanisms for pyrolysis of poly(α-methylstyrene) must rationalize high selectivity for monomer formation, negligible formation of volatile oligomers, and notably slow decrease in molecular weight compared with the rate of weight loss, i.e., unzipping dominates both back-biting and transfer. Backbone homolysis should form both a tert-benzylic radical R_tb and a prim radical R_p, with formation of the latter potentially supplemented in chain propagation steps emanating from the former. Hence product-forming pathways characteristic of each are expected to compete. Simulations of initial product distributions based on assigned rate constants for chain propagation steps indicate that R_tb is indeed predicted to efficiently unzip with minimal transfer or back-biting. However, R_p is predicted to give comparable amounts of transfer and back-biting with minimal unzipping, behavior inconsistent with experimental data. The proposed escape from this impasse is a previously unrecognized pathway, 1,2-phenyl shift in R_p to form a tert radical. If it undergoes β-scission, the net result is an inter-conversion of R_p to R_tb. Quantitative simulations suggest that this sequence is indeed highly competitive with other reactions of R_p and thus efficiently subverts the otherwise expected propagation of chains emanating from R_p.     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Thermodynamics of Copper(II), Zinc(II), Cobalt(II), Mercury(II), and Nickel(II) Complexation with α,α-Dipyrrolylmethene in DMF

Thermodynamics of complexation reactions between Zn(II), Ni(II), Hg(II), Co(II), and Cu(II) acetates and 3,35,5-tetramethyl-4,4-dibutyldipyrrolylmethene in DMF at 298.15 K is studied by calorimetric and spectrophotometric methods. The replacement of Zn²⁺, Ni²⁺, and Hg²⁺ ions by Co²⁺ and Cu²⁺ ions was found to increase the equilibrium constants of reactions of complex formation with dipyrrolylmethene by more than two orders of magnitude. The role of solvation interactions in coordination of dipyrrolylmethene by d-metal ions is established.     

Preparation method of superactive Ziegler–Natta catalysts to produce ultra-high molecular weight amorphous poly(1-octene), poly(1-decene), and their copolymers

In this article, highly active and long-term stable Ziegler–Natta catalysts were formulated. 1-Octene and 1-decene homopolymerization and copolymerization were carried out with the prepared catalysts and the effect of catalyst formulation on the molecular weight and crystallinity level of polymers were investigated. Also, the valence state of Ti species was determined using X-ray photoelectron spectroscopy. The polymer molecular weights were determined by measuring the intrinsic viscosity. T_C and degree of crystallinity were obtained from the second heating curve of differential scanning calorimetry analysis. Using these catalysts, polymerization conversion of long chain α-olefins was reached to higher than 95%.     

Quaternary (liquid + liquid) equilibria of aqueous two-phase poly (ethylene glycol), poly (DMAM–TBAM), and KH2PO4: Experimental and generalized Flory–Huggins theory

Quaternary (liquid + liquid) equilibrium (LLE) data of the aqueous two-phase poly (ethylene glycol), poly (N,N-dimethylacrylamide-t-butylacrylamide) with abbreviation name poly (DMAM–TBAM) as a hydrophobic association water-soluble copolymer and KH₂PO₄ has been determined experimentally at T = 338.15 K. Furthermore, the generalized Flory–Huggins theory with two electrostatic terms (the Debye–Hückel and Pitzer–Debye–Hückel) was used for correlation of the phase behavior of the quaternary system and the interaction parameters between all species were calculated.It was found that addition of poly (DMAM–TBAM) copolymer as well as changing the temperature can shift the binodal curves of aqueous two-phase systems containing polyethylene glycol (PEG) and salt. Also, the phase behavior of the DMAM–TBAM copolymer with some salts containing sodium chloride, ammonium hydrogen phosphate, potassium hydrogen phosphate, and sodium carbonate were studied experimentally at T = 338.15 K and the effect of the salt type on the their binodal curves was determined.     

Preparation of new poly(ester triazole) and poly(amide triazole) by “click chemistry”

New dialkynyl monomers containing furan and ester or amide units were prepared via three step reactions from ethyl furan-2-carboxylate. Their click polymerization with either poly(ethylene glycol) diazide or poly(tetrahydrofuran) diazide catalyzed by Cu(I) led to corresponding amorphous poly(ester triazole) and poly(amide triazole) with molecular weights in the range of (7–11) × 10³ and with glass transition temperatures in the range of ?35 and ?19°C. The temperature at 5% wt loss (T ₁₀), determined from TGA of polyazomethines were in the range 345–365°C indicating their good thermal stability.     

Pyrolysis mass spectrometry analysis of poly(vinyl acetate), poly(methyl methacrylate) and their blend coalesced from inclusion compounds formed with γ-cyclodextrin

Direct insertion probe pyrolysis mass spectrometry (DIP-MS) analyses of poly(methyl methacrylate) (PMMA), poly(vinyl acetate) (PVAc) and binary PMMA/PVAc guests, coalesced from their inclusion compounds (ICs) formed with host γ-cyclodextrin (γ-CD) through removal of the γ-CD host, have been performed. A slight increase in the thermal stabilities of the coalesced polymers were recorded both by TGA and DIP-MS compared to the corresponding as-received polymers. The DIP-MS observations pointed out that the thermal stability and degradation products of these polymers are affected once they are included inside the IC channels created by the stacked host γ-CDs. DIP-MS observations suggested that the degradation mechanisms for PMMA and PVAc chains in their coalesced blend were significantly altered from those observed in their as-received and solution blended samples. This was attributed to the presence of specific molecular interactions between the intimately mixed PMMA and PVAc chains in their coalesced blend.     

Swelling–shrinking behaviors of poly(N-isopropylacrylamide) and poly(N-n-propylacrylamide) gels prepared by chemical and radiation crosslinking methods

The swelling and shrinking kinetics of thermosensitive gels based on N-isopropylacrylamide (NiPAAm) and N-n-propylacrylamide (NnPAAm) were studied. Four gels cylindrical in shape were prepared by two different methods: γ-ray irradiation to aqueous solutions of poly(NiPAAm) (PNiPAAm) or poly(NnPAAm) (PNnPAAm) and redox polymerization of NiPAAm or NnPAAm monomer using N,N′-methylenebisacrylamide as a crosslinker. There were a few differences in the swelling kinetics among these gels. However, a marked difference was observed in the shrinking processes, the rate of which was faster in the order of radiation-crosslinked PNiPAAm gel > radiation-crosslinked PNnPAAm gel > chemically crosslinked PNnPAAm gel > chemically crosslinked PNiPAAm gel. This difference was discussed in terms of the microscopic structure of the gels, which was studied by light scattering techniques. It was found that the static inhomogeneities frozen in the chemically and radiation-crosslinked gels play a key role in their shrinking kinetics.