Strong Metal–Support Interactions between Pt Single Atoms and TiO2

Strong metal–support interaction (SMSI) has gained great attention in the field of heterogeneous catalysis. However, whether single-atom catalysts can exhibit SMSI remains unknown. Here, we demonstrate that SMSI can occur on TiO₂-supported Pt single atoms but at a much higher reduction temperature than that for Pt nanoparticles (NPs). Pt single atoms involved in SMSI are not covered by the TiO₂ support nor do they sink into its subsurface. The suppression of CO adsorption on Pt single atoms stems from coordination saturation (18-electron rule) rather than the physical coverage of Pt atoms by the support. Based on the new finding it is revealed that single atoms are the true active sites in the hydrogenation of 3-nitrostyrene, while Pt NPs barely contribute to the activity since the NP sites are selectively encapsulated. The findings in this work provide a new approach to study the active sites by tuning SMSI.     

Broadband Light Harvesting and Unidirectional Electron Flow for Efficient Electron Accumulation for Hydrogen Generation

The efficiency of solar hydrogen evolution closely depends on the multiple electrons accumulation on the catalytic center for two‐electron‐involved water reduction. Herein, we report an effective approach to enable broadband light absorption and unidirectional electron flow for efficiently accumulating electrons at active sites for hydrogen evolution by rationally engineering the nanostructure of Pt nanoparticles (NPs), TiO₂, and SiO₂ support. In addition to Schottky‐junction‐driven electron transfer from TiO₂ to Pt, Pt NPs also produce hot electrons by recycling the scattered visible and near‐infrared (vis‐NIR) light of the support. Unidirectional electron flow to active sites is realized by tuning the components spatial distribution. These features collectively accumulate multiple electrons at catalytic Pt sites, thereby affording enhanced activity toward hydrogen evolution under simulated sunlight.     

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron–hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO₂ support (Pt₁/def‐TiO₂). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO₂ units to generate surface oxygen vacancies and form a Pt‐O‐Ti³⁺ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt‐O‐Ti³⁺ atomic interface effectively facilitates photogenerated electrons to transfer from Ti³⁺ defective sites to single Pt atoms, thereby enhancing the separation of electron–hole pairs. This unique structure makes Pt₁/def‐TiO₂ exhibit a record‐level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h^?1, exceeding the Pt nanoparticle supported TiO₂ catalyst by a factor of 591.     

Manifestation of the effect of strong metal-support interaction in a Pt/TiO2 rutile catalyst

Pt/TiO₂ catalysts supported on ultradispersed rutile are prepared. The effect of strong metal-support interaction (SMSI) in these catalysts is more pronounced than in Pt/TiO₂ catalysts with greater fractions of an anatase phase in the support. Mild oxidation of the rutile catalyst eliminates the SMSI effect.     

Isolated Platinum Atoms Stabilized by Amorphous Tungstenic Acid: Metal–Support Interaction for Synergistic Oxygen Activation

Oxygen activation plays a crucial role in many important chemical reactions such as oxidation of organic compounds and oxygen reduction. For developing highly active materials for oxygen activation, herein, we report an atomically dispersed Pt on WO₃ nanoplates stabilized by in situ formed amorphous H₂WO₄ out‐layer and the mechanism for activating molecular oxygen. Experimental and theoretical studies demonstrate that the isolated Pt atoms coordinated with oxygen atoms from [WO₆] and water of H₂WO₄, consequently leading to optimized surface electronic configuration and strong metal–support interaction (SMSI). In exemplified reactions of butanone oxidation sensing and oxygen reduction, the atomic Pt/WO₃ hybrid exhibits superior activity than those of Pt nanoclusters/WO₃ and bare WO₃ as well as enhanced long‐term durability. This work will provide insight into the origin of activity and stability for atomically dispersed materials, thus promoting the development of highly efficient and durable single atom‐based catalysts.     

Kinetics of Benzene and Toluene Hydrogenation on a Pt/TiO2 Catalyst

The kinetics and mechanism of benzene and toluene hydrogenation on a Pt/TiO₂ catalyst were studied in steady-state and non-steady-state regimes in the presence or absence of strong metal–support interactions (SMSI). It was found that the kinetics and mechanism of the test reactions were independent of SMSI. The observed effect of a decrease in the catalytic activity in the SMSI state was due to structural changes in the active centers of the catalyst and to the presence of strongly bound hydrogen species on the surface; this was also supported by thermal-desorption data.     

The Significant Role of the Atomic Surface Structure of Support in Strong Metal-Support Interaction

Supported metal catalysts are important in many industrial reactions. It is reported that support materials are not always inert, and in some cases could even interact with metal nanoparticles (NPs) actively via various ways. In particular, the strong metal-support interaction (SMSI), referring to metal NPs covered by support materials, affects catalysis at the active sites on the metal NP surface, which can serve as a very effective method in tuning and improving catalytic performance. By tailoring the support materials or controlling the treatment processes, different kinds of SMSI, such as classical SMSI, oxidative SMSI, wet-chemistry SMSI, and adsorbate-mediated SMSI, can be achieved. This concept summarizes the general strategies to tune SMSI and discusses the key results. Moreover, a new proposal is presented to tailor SMSI by combining both the exposed facets of the support materials and external environments. Furthermore, the challenges faced at present are discussed and useful insights for future research concerning this topic are provided.     

Maximizing the Number of Interfacial Sites in Single‐Atom Catalysts for the Highly Selective,Solvent‐Free Oxidation of Primary Alcohols

The solvent‐free selective oxidation of alcohols to aldehydes with molecular oxygen is highly attractive yet challenging. Interfacial sites between a metal and an oxide support are crucial in determining the activity and selectivity of such heterogeneous catalysts. Herein, we demonstrate that the use of supported single‐atom catalysts (SACs) leads to high activity and selectivity in this reaction. The significantly increased number of interfacial sites, resulting from the presence of individually dispersed metal atoms on the support, renders SACs one or two orders of magnitude more active than the corresponding nanoparticle (NP) catalysts. Lattice oxygen atoms activated at interfacial sites were found to be more selective than O₂ activated on metal NPs in oxidizing the alcohol substrate. This work demonstrates for the first time that the number of interfacial sites is maximized in SACs, providing a new avenue for improving catalytic performance by developing appropriate SACs for alcohol oxidation and other reactions occurring at metal–support interfacial sites.     

Maximizing the Number of Interfacial Sites in Single‐Atom Catalysts for the Highly Selective,Solvent‐Free Oxidation of Primary Alcohols

The solvent‐free selective oxidation of alcohols to aldehydes with molecular oxygen is highly attractive yet challenging. Interfacial sites between a metal and an oxide support are crucial in determining the activity and selectivity of such heterogeneous catalysts. Herein, we demonstrate that the use of supported single‐atom catalysts (SACs) leads to high activity and selectivity in this reaction. The significantly increased number of interfacial sites, resulting from the presence of individually dispersed metal atoms on the support, renders SACs one or two orders of magnitude more active than the corresponding nanoparticle (NP) catalysts. Lattice oxygen atoms activated at interfacial sites were found to be more selective than O₂ activated on metal NPs in oxidizing the alcohol substrate. This work demonstrates for the first time that the number of interfacial sites is maximized in SACs, providing a new avenue for improving catalytic performance by developing appropriate SACs for alcohol oxidation and other reactions occurring at metal–support interfacial sites.     

Hierarchical TiO2 nanosheet‐assembled nanotubes with dual electron sink functional sites for efficient photocatalytic degradation of rhodamine B

A novel Pt–TiO₂/Ag nanotube photocatalyst has been synthesized successfully via a facile method. TiO₂ nanotubes are assembled with numerous ultrathin TiO₂ nanosheets and show a highly open structure. The gaps between adjacent TiO₂ nanosheets can serve as channels for the access of reactants, accelerating the mass transfer process. During the fabrication process of the Pt–TiO₂/Ag nanotube photocatalyst, high‐quality Pt–SiO₂ nanotubes are synthesized first with the structure‐directing effect of polyvinylpyrrolidone. Then a TiO₂ layer is coated on the outside surface of the silica nanotubes. The introduced titanium species can be converted into TiO₂ nanosheet structure during the subsequent hydrothermal treatment, gradually constructing nanosheet‐assembled nanotubes. Lastly, after the introduction of another electron sink function site of Ag through UV irradiation, the Pt–TiO₂/Ag nanotube photocatalyst with dual electron sink functional sites is obtained. The specially doped Pt and Ag NPs can simultaneously inhibit the recombination process of photogenerated charge carriers and increase light utilization efficiency. Therefore, the as‐synthesized Pt–TiO₂/Ag nanotube catalyst exhibits a high photocatalytic degradation performance for rhodamine B of 0.2 min^?1, which is about 3.2 and 5.3 times as high as that of Pt–TiO₂ and TiO₂ nanotubes because of the enhanced charge carrier separation efficiency. Furthermore, in the unique nanoarchitecture, the nanotubes are assembled with numerous ultrathin TiO₂ nanosheets, which can absorb abundant active species and dye molecules for photocatalytic reaction. On the basis of experimental results, a possible rhodamine B degradation mechanism is proposed to explain the excellent photocatalytic efficiency of the Pt–TiO₂/Ag nanotube photocatalyst.     

Tuning crystal structure of iridium-incorporated titanium dioxide nanosupport and its influence on platinum catalytic performance in direct ethanol fuel cells

Titanium dioxide (TiO₂) has recently been used as a promising support for platinum (Pt)-based catalysts; however, its very low electrical conductivity and understanding the effect of the TiO₂ structure on Pt electrocatalytic performance for ethanol electro-oxidation reaction (EOR) are major challenges in direct ethanol fuel cells. This study reports an easy and green approach to control the crystal structures of a robust iridium-incorporated TiO₂ nanomaterial and its effect on the Pt electrocatalytic performance for EOR. A green hydrothermal route is used to fabricate iridium-modified TiO₂ nanosupports with different structures by controlling the reaction temperature and time as well as solution pH without using further calcination, followed by the anchoring of Pt nanoparticles (NPs) via a surfactant-free modified reduction route. The experimental results indicate that the pure structure of the iridium-modified TiO₂ nanosupport can easily be obtained by controlling the solution pH. In terms of EOR, all prepared catalysts show more effective performance than the commercial Pt/C catalyst. Among the prepared catalysts, the Pt anchored on the rutile iridium-incorporated TiO₂ exhibits higher EOR performance than on the anatase iridium-incorporated TiO₂ nanosupport, with negative onset potential, high current density, and electrochemical stability. The enhancement is assigned to the great adsorption and desorption ability as well as the high natural resistance to metal NPs ripening on (110) facets of the rutile structure compared with the (101) facets of the anatase structure. This exploration can offer an efficient route for tuning the structure of metal oxides and understanding the effect of the structure of the TiO₂-based support on the Pt catalytic performance.     

Electrochemical Designing of Au/Pt Core Shell Nanoparticles as Nanostructured Catalyst with Tunable Activity for Oxygen Reduction

Au/Pt core shell nanoparticles (NPs) have been prepared via a layer‐by‐layer growth of Pt layers on Au NPs using underpotential deposition (UPD) redox replacement technique. A single UPD Cu monolayer replacement with Pt(II) yielded a uniform Pt film on Au NPs, and the shell thickness can be tuned by controlling the number of UPD redox replacement cycles. Oxygen reduction reaction (ORR) in air‐saturated 0.1 M H₂SO₄ was used to investigate the electrocatalytic behavior of the as‐prepared core shell NPs. Cyclic voltammograms of ORR show that the peak potentials shift positively from 0.32 V to 0.48 V with the number of Pt layers increasing from one to five, suggesting the electrocatalytic activity increases with increasing the thickness of Pt shell. The increase in electrocatalytic activity may originate mostly from the large decrease of electronic influence of Au cores on surface Pt atoms. Rotating ring‐disk electrode voltammetry and rotating disk electrode voltammetry demonstrate that ORR is mainly a four‐electron reduction on the as‐prepared modified electrode with 5 Pt layers and first charge transfer is the rate‐determining step.     

Engineering the Coordination Environment of Single‐Atom Platinum Anchored on Graphdiyne for Optimizing Electrocatalytic Hydrogen Evolution

Two Pt single‐atom catalysts (SACs) of Pt‐GDY1 and Pt‐GDY2 were prepared on graphdiyne (GDY)supports. The isolated Pt atoms are dispersed on GDY through the coordination interactions between Pt atoms and alkynyl C atoms in GDY, with the formation of five‐coordinated C₁‐Pt‐Cl₄ species in Pt‐GDY1 and four‐coordinated C₂‐Pt‐Cl₂ species in Pt‐GDY2. Pt‐GDY2 shows exceptionally high catalytic activity for the hydrogen evolution reaction (HER), with a mass activity up to 3.3 and 26.9 times more active than Pt‐GDY1 and the state‐of‐the‐art commercial Pt/C catalysts, respectively. Pt‐GDY2 possesses higher total unoccupied density of states of Pt 5d orbital and close to zero value of Gibbs free energy of the hydrogen adsorption (|Δ |) at the Pt active sites, which are responsible for its excellent catalytic performance. This work can help better understand the structure–catalytic activity relationship in Pt SACs.     

Regulation of Strong Metal-Support Interaction by Alkaline Earth Metal Salts

Classical strong metal-support interaction (SMSI) is of significant importance to heterogeneous catalysis, where electronic promotion and encapsulation of noble metal by reducible support are two main intrinsic properties of SMSI. However, the excessive encapsulation will inevitably hamper the contact between active sites and reactant, leading to reduced activity in catalysis. Herein, alkaline earth metal salts are employed to depress the encapsulation of Ru nanoparticles in Ru/TiO₂ catalyst in the present study. Thermodynamic calculation, transmission electron microscopy (TEM) and chemisorption results show that the alkaline earth metal salts could successfully prevent the migration of TiO_2-x overlayer to Ru nanoparticles in Ru/TiO₂ catalyst via in situ formation of titanates, resulting in high exposure of active metal. Meanwhile, X-ray photoelectron spectroscopy (XPS) and hydrogen temperature-programmed reduction (H₂-TPR) results reveal that an even stronger electron donation from the reduced support to Ru nanoparticles is achieved. As a result, the alkaline earth metal salts-doped Ru/TiO₂ catalysts exhibit superior activity in catalytic hydrogenation of aromatics, which is in contrast to the pristine Ru/TiO₂ catalyst that shows negligible activity under the same conditions due to the excess encapsulation of Ru nanoparticles in Ru/TiO₂ catalyst.     

Relating the Composition of PtxRu100−x/C Nanoparticles to Their Structural Aspects and Electrocatalytic Activities in the Methanol Oxidation Reaction

A controlled composition‐based method—that is, the microwave‐assisted ethylene glycol (MEG) method—was successfully developed to prepare bimetallic Pt_xRu_100?x/C nanoparticles (NPs) with different alloy compositions. This study highlights the impact of the variation in alloy composition of Pt_xRu_100?x/C NPs on their alloying extent (structure) and subsequently their catalytic activity towards the methanol oxidation reaction (MOR). The alloying extent of these Pt_xRu_100?x/C NPs has a strong influence on their Pt d‐band vacancy and Pt electroactive surface area (Pt ECSA); this relationship was systematically evaluated by using X‐ray absorption (XAS), scanning electron microscopy (SEM) coupled with energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), density functional theory (DFT) calculations, and electrochemical analyses. The MOR activity depends on two effects that act in cooperation, namely, the number of active Pt sites and their activity. Here the number of active Pt sites is associated with the Pt ECSA value, whereas the Pt‐site activity is associated with the alloying extent and Pt d‐band vacancy (electronic) effects. Among the Pt_xRu_100?x/C NPs with various Pt:Ru atomic ratios (x=25, 50, and 75), the Pt₇₅Ru₂₅/C NPs were shown to be superior in MOR activity on account of their favorable alloying extent, Pt d‐band vacancy, and Pt ECSA. This short study brings new insight into probing the synergistic effect on the surface reactivity of the Pt_xRu_100?x/C NPs, and possibly other bimetallic Pt‐based alloy NPs.     

High Electrocatalytic Activity of Pt–Pd Binary Spherocrystals Chemically Assembled in Vertically Aligned TiO2 Nanotubes

To obtain noble metal catalysts with high efficiency, long‐term stability, and poison resistance, Pt and Pd are assembled in highly ordered and vertically aligned TiO₂ nanotubes (NTs) by means of the pulsed‐current deposition (PCD) method with assistance of ultrasonication (UC). Here, Pd serves as a dispersant which prevents agglomeration of Pt. Thus Pt–Pd binary catalysts are embed into TiO₂ NTs array under UC in sunken patterns of composite spherocrystals (Sps). Owing to this synthesis method and restriction by the NTs, the these catalysts show improved dispersion, more catalytically active sites, and higher surface area. This nanotubular metallic support material with good physical and chemical stability prevents catalyst loss and poisoning. Compared with monometallic Pt and Pd, the sunken‐structured Pt–Pd spherocrystal catalyst exhibits better catalytic activity and poison resistance in electrocatalytic methanol oxidation because of its excellent dispersion. The catalytic current density is enhanced by about 15 and 310 times relative to monometallic Pt and Pd, respectively. The poison resistance of the Pt–Pd catalyst was 1.5 times higher than that of Pt and Pd, and they show high electrochemical stability with a stable current enduring for more than 2100 s. Thus, the TiO₂ NTs on a Ti substrate serve as an excellent support material for the loading and dispersion of noble metal catalysts.     

Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Efficient separation of photogenerated electrons and holes, and associated surface reactions, is a crucial aspect of efficient semiconductor photocatalytic systems employed for photocatalytic hydrogen production. A new CoO_x/TiO₂/Pt photocatalyst produced by template‐assisted atomic layer deposition is reported for photocatalytic hydrogen production on Pt and CoO_x dual cocatalysts. Pt nanoclusters acting as electron collectors and active sites for the reduction reaction are deposited on the inner surface of porous TiO₂ nanotubes, while CoO_x nanoclusters acting as hole collectors and active sites for oxidation reaction are deposited on the outer surface of porous TiO₂ nanotubes. A CoO_x/TiO₂/Pt photocatalyst, comprising ultra‐low concentrations of noble Pt (0.046 wt %) and CoO_x (0.019 wt %) deposited simultaneously with one atomic layer deposition cycle, achieves remarkably high photocatalytic efficiency (275.9 μmol h⁻¹), which is nearly five times as high as that of pristine TiO₂ nanotubes (56.5 μmol h⁻¹). The highly dispersed Pt and CoO_x nanoclusters, porous structure of TiO₂ nanotubes with large specific surface area, and the synergetic effect of the spatially separated Pt and CoO_x dual cocatalysts contribute to the excellent photocatalytic activity.     

Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

A Tandem Catalyst with Multiple Metal Oxide Interfaces Produced by Atomic Layer Deposition

Ideal heterogeneous tandem catalysts necessitate the rational design and integration of collaborative active sites. Herein, we report on the synthesis of a new tandem catalyst with multiple metal‐oxide interfaces based on a tube‐in‐tube nanostructure using template‐assisted atomic layer deposition, in which Ni nanoparticles are supported on the outer surface of the inner Al₂O₃ nanotube (Ni/Al₂O₃ interface) and Pt nanoparticles are attached to the inner surface of the outer TiO₂ nanotube (Pt/TiO₂ interface). The tandem catalyst shows remarkably high catalytic efficiency in nitrobenzene hydrogenation over Pt/TiO₂ interface with hydrogen formed in situ by the decomposition of hydrazine hydrate over Ni/Al₂O₃ interface. This can be ascribed to the synergy effect of the two interfaces and the confined nanospace favoring the instant transfer of intermediates. The tube‐in‐tube tandem catalyst with multiple metal‐oxide interfaces represents a new concept for the design of highly efficient and multifunctional nanocatalysts.     

Investigation of the Support Effect in Atomically Dispersed Pt on WO3−x for Utilization of Pt in the Hydrogen Evolution Reaction

Single‐atom catalysts (SACs) have attracted growing attention because they maximize the number of active sites, with unpredictable catalytic activity. Despite numerous studies on SACs, there is little research on the support, which is essential to understanding SAC. Herein, we systematically investigated the influence of the support on the performance of the SAC by comparing with single‐atom Pt supported on carbon (Pt SA/C) and Pt nanoparticles supported on WO_3?x (Pt NP/WO_3?x). The results revealed that the support effect was maximized for atomically dispersed Pt supported on WO_3?x (Pt SA/WO_3?x). The Pt SA/WO_3?x exhibited a higher degree of hydrogen spillover from Pt atoms to WO_3?x at the interface, compared with Pt NP/WO_3?x, which drastically enhanced Pt mass activity for hydrogen evolution (up to 10 times). This strategy provides a new framework for enhancing catalytic activity for HER, by reducing noble metal usage in the field of SACs.