Quantitative Assessment of Tip Effects in Single-Molecule High-Speed Atomic Force Microscopy Using DNA Origami Substrates

High-speed atomic force microscopy (HS-AFM) is widely employed in the investigation of dynamic biomolecular processes at a single-molecule level. However, it remains an open and somewhat controversial question, how these processes are affected by the rapidly scanned AFM tip. While tip effects are commonly believed to be of minor importance in strongly binding systems, weaker interactions may significantly be disturbed. Herein, we quantitatively assess the role of tip effects in a strongly binding system using a DNA origami-based single-molecule assay. Despite its femtomolar dissociation constant, we find that HS-AFM imaging can disrupt monodentate binding of streptavidin (SAv) to biotin (Bt) even under gentle scanning conditions. To a lesser extent, this is also observed for the much stronger bidentate SAv–Bt complex. The presented DNA origami-based assay can be universally employed to quantify tip effects in strongly and weakly binding systems and to optimize the experimental settings for their reliable HS-AFM imaging.     

Single‐Molecule Visualization of the Activity of a Zn2+‐Dependent DNAzyme

We demonstrate the single‐molecule imaging of the catalytic reaction of a Zn²⁺‐dependent DNAzyme in a DNA origami nanostructure. The single‐molecule catalytic activity of the DNAzyme was examined in the designed nanostructure, a DNA frame. The DNAzyme and a substrate strand attached to two supported dsDNA molecules were assembled in the DNA frame in two different configurations. The reaction was monitored by observing the configurational changes of the incorporated DNA strands in the DNA frame. This configurational changes were clearly observed in accordance with the progress of the reaction. The separation processes of the dsDNA molecules, as induced by the cleavage by the DNAzyme, were directly visualized by high‐speed atomic force microscopy (AFM). This nanostructure‐based AFM imaging technique is suitable for the monitoring of various chemical and biochemical catalytic reactions at the single‐molecule level.     

Direct and Single‐Molecule Visualization of the Solution‐State Structures of G‐Hairpin and G‐Triplex Intermediates

We present the direct and single‐molecule visualization of the in‐pathway intermediates of the G‐quadruplex folding that have been inaccessible by any experimental method employed to date. Using DNA origami as a novel tool for the structural control and high‐speed atomic force microscopy (HS‐AFM) for direct visualization, we captured images of the unprecedented solution‐state structures of a tetramolecular antiparallel and (3+1)‐type G‐quadruplex intermediates, such as G‐hairpin and G‐triplex, with nanometer precision. No such structural information was reported previously with any direct or indirect technique, solution or solid‐state, single‐molecule or bulk studies, and at any resolution. Based on our results, we proposed a folding mechanism of these G‐quadruplexes.     

Single‐Molecule Observation of the Photoregulated Conformational Dynamics of DNA Origami Nanoscissors

We demonstrate direct observation of the dynamic opening and closing behavior of photocontrollable DNA origami nanoscissors using high‐speed atomic force microscopy (HS‐AFM). First the conformational change between the open and closed state controlled by adjustment of surrounding salt concentration could be directly observed during AFM scanning. Then light‐responsive moieties were incorporated into the nanoscissors to control these structural changes by photoirradiation. Using photoswitchable DNA strands, we created a photoresponsive nanoscissors variant and were able to distinguish between the open and closed conformations after respective irradiation with ultraviolet (UV) and visible (Vis) light by gel electrophoresis and AFM imaging. Additionally, these reversible changes in shape during photoirradiation were directly visualized using HS‐AFM. Moreover, four photoswitchable nanoscissors were assembled into a scissor–actuator‐like higher‐order object, the configuration of which could be controlled by the open and closed switching induced by irradiation with UV and Vis light.     

Single‐Molecule Mechanochemical Sensing Using DNA Origami Nanostructures

While single‐molecule sensing offers the ultimate detection limit, its throughput is often restricted as sensing events are carried out one at a time in most cases. 2D and 3D DNA origami nanostructures are used as expanded single‐molecule platforms in a new mechanochemical sensing strategy. As a proof of concept, six sensing probes are incorporated in a 7‐tile DNA origami nanoassembly, wherein binding of a target molecule to any of these probes leads to mechanochemical rearrangement of the origami nanostructure, which is monitored in real time by optical tweezers. Using these platforms, 10 pM platelet‐derived growth factor (PDGF) are detected within 10 minutes, while demonstrating multiplex sensing of the PDGF and a target DNA in the same solution. By tapping into the rapid development of versatile DNA origami nanostructures, this mechanochemical platform is anticipated to offer a long sought solution for single‐molecule sensing with improved throughput.     

Make them Blink: Probes for Super‐Resolution Microscopy

In recent years, a number of approaches have emerged that enable far‐field fluorescence imaging beyond the diffraction limit of light, namely super‐resolution microscopy. These techniques are beginning to profoundly alter our abilities to look at biological structures and dynamics and are bound to spread into conventional biological laboratories. Nowadays these approaches can be divided into two categories, one based on targeted switching and readout, and the other based on stochastic switching and readout of the fluorescence information. The main prerequisite for a successful implementation of both categories is the ability to prepare the fluorescent emitters in two distinct states, a bright and a dark state. Herein, we provide an overview of recent developments in super‐resolution microscopy techniques and outline the special requirements for the fluorescent probes used. In combination with the advances in understanding the photophysics and photochemistry of single fluorophores, we demonstrate how essentially any single‐molecule compatible fluorophore can be used for super‐resolution microscopy. We present examples for super‐resolution microscopy with standard organic fluorophores, discuss factors that influence resolution and present approaches for calibration samples for super‐resolution microscopes including AFM‐based single‐molecule assembly and DNA origami.     

Nanoscale Chemical Imaging Using Tip‐Enhanced Raman Spectroscopy: A Critical Review

Methods for chemical analysis at the nanometer scale are crucial for understanding and characterizing nanostructures of modern materials and biological systems. Tip‐enhanced Raman spectroscopy (TERS) combines the chemical information provided by Raman spectroscopy with the signal enhancement known from surface‐enhanced Raman scattering (SERS) and the high spatial resolution of atomic force microscopy (AFM) or scanning tunneling microscopy (STM). A metallic or metallized tip is illuminated by a focused laser beam and the resulting strongly enhanced electromagnetic field at the tip apex acts as a highly confined light source for Raman spectroscopic measurements. This Review focuses on the prerequisites for the efficient coupling of light to the tip as well as the shortcomings and pitfalls that have to be considered for TERS imaging, a fascinating but still challenging way to look at the nanoworld. Finally, examples from recent publications have been selected to demonstrate the potential of this technique for chemical imaging with a spatial resolution of approximately 10 nm and sensitivity down to the single‐molecule level for applications ranging from materials sciences to life sciences.     

Ion‐Selective Formation of a Guanine Quadruplex on DNA Origami Structures

DNA origami nanostructures are a versatile tool that can be used to arrange functionalities with high local control to study molecular processes at a single‐molecule level. Here, we demonstrate that DNA origami substrates can be used to suppress the formation of specific guanine (G) quadruplex structures from telomeric DNA. The folding of telomeres into G‐quadruplex structures in the presence of monovalent cations (e.g. Na⁺ and K⁺) is currently used for the detection of K⁺ ions, however, with insufficient selectivity towards Na⁺. By means of FRET between two suitable dyes attached to the 3′‐ and 5′‐ends of telomeric DNA we demonstrate that the formation of G‐quadruplexes on DNA origami templates in the presence of sodium ions is suppressed due to steric hindrance. Hence, telomeric DNA attached to DNA origami structures represents a highly sensitive and selective detection tool for potassium ions even in the presence of high concentrations of sodium ions.     

Reversible Reconfiguration of DNA Origami Nanochambers Monitored by Single‐Molecule FRET

Today, DNA nanotechnology is one of the methods of choice to achieve spatiotemporal control of matter at the nanoscale. By combining the peculiar spatial addressability of DNA origami structures with the switchable mechanical movement of small DNA motifs, we constructed reconfigurable DNA nanochambers as dynamic compartmentalization systems. The reversible extension and contraction of the inner cavity of the structures was used to control the distance‐dependent energy transfer between two preloaded fluorophores. Interestingly, single‐molecule FRET studies revealed that the kinetics of the process are strongly affected by the choice of the switchable motifs and/or actuator sequences, thus offering a valid method for fine‐tuning the dynamic properties of large DNA nanostructures. We envisage that the proposed DNA nanochambers may function as model structures for artificial biomimetic compartments and transport systems.     

Yoctoliter Thermometry for Single‐Molecule Investigations: A Generic Bead‐on‐a‐Tip Temperature‐Control Module

A new temperature‐jump (T‐jump) strategy avoids photo‐damage of individual molecules by focusing a low‐intensity laser on a black microparticle at the tip of a capillary. The black particle produces an efficient photothermal effect that enables a wide selection of lasers with powers in the milliwatt range to achieve a T‐jump of 65 °C within milliseconds. To measure the temperature in situ in single‐molecule experiments, the temperature‐dependent mechanical unfolding of a single DNA hairpin molecule was monitored by optical tweezers within a yoctoliter volume. Using this bead‐on‐a‐tip module and the robust single‐molecule thermometer, full thermodynamic landscapes for the unfolding of this DNA hairpin were retrieved. These approaches are likely to provide powerful tools for the microanalytical investigation of dynamic processes with a combination of T‐jump and single‐molecule techniques.     

Complexing DNA Origami Frameworks through Sequential Self‐Assembly Based on Directed Docking

Ordered DNA origami arrays have the potential to compartmentalize space into distinct periodic domains that can incorporate a variety of nanoscale objects. Herein, we used the cavities of a preassembled 2D DNA origami framework to incorporate square‐shaped DNA origami structures (SQ‐origamis). The framework was self‐assembled on a lipid bilayer membrane from cross‐shaped DNA origami structures (CR‐origamis) and subsequently exposed to the SQ‐origamis. High‐speed AFM revealed the dynamic adsorption/desorption behavior of the SQ‐origamis, which resulted in continuous changing of their arrangements in the framework. These dynamic SQ‐origamis were trapped in the cavities by increasing the Mg²⁺ concentration or by introducing sticky‐ended cohesions between extended staples, both from the SQ‐ and CR‐origamis, which enabled the directed docking of the SQ‐origamis. Our study offers a platform to create supramolecular structures or systems consisting of multiple DNA origami components.     

液体环境单分子免疫球蛋白G的原子力显微镜高分辨成像

原子力显微镜技术( AFM)具有纳米级高分辨成像能力,是研究生物大分子结构和功能的重要工具之一。制备合适的样品是获取高分辨成像的关键要素。本研究结合DNA折纸技术,将抗原分子修饰在DNA折纸上,通过分子识别作用,抗体分子与抗原分子特异性结合,形成由DNA折纸和抗原抗体复合物构成的纳米结构。利用DNA折纸在云母表面上的吸附特点,使得抗体分子选择性地吸附在衬底表面上,由此获得了液体环境中的单个地高辛抗体免疫球蛋白G( IgG)分子的“Y”超微结构形貌。本方法简单、方便,为AFM在单分子水平上检测和表征生物分子结构和功能提供帮助。     

Triple Helix Formation in a Topologically Controlled DNA Nanosystem

In the present study, we demonstrate single‐molecule imaging of triple helix formation in DNA nanostructures. The binding of the single‐molecule third strand to double‐stranded DNA in a DNA origami frame was examined using two different types of triplet base pairs. The target DNA strand and the third strand were incorporated into the DNA frame, and the binding of the third strand was controlled by the formation of Watson–Crick base pairing. Triple helix formation was monitored by observing the structural changes in the incorporated DNA strands. It was also examined using a photocaged third strand wherein the binding of the third strand was directly observed using high‐speed atomic force microscopy during photoirradiation. We found that the binding of the third strand could be controlled by regulating duplex formation and the uncaging of the photocaged strands in the designed nanospace.     

Growth and Origami Folding of DNA on Nanoparticles for High‐Efficiency Molecular Transport in Cellular Imaging and Drug Delivery

A novel three‐dimensional (3D) superstructure based on the growth and origami folding of DNA on gold nanoparticles (AuNPs) was developed. The 3D superstructure contains a nanoparticle core and dozens of two‐dimensional DNA belts folded from long single‐stranded DNAs grown in situ on the nanoparticle by rolling circle amplification (RCA). We designed two mechanisms to achieve the loading of molecules onto the 3D superstructures. In one mechanism, ligands bound to target molecules are merged into the growing DNA during the RCA process (merging mechanism). In the other mechanism, target molecules are intercalated into the double‐stranded DNAs produced by origami folding (intercalating mechanism). We demonstrated that the as‐fabricated 3D superstructures have a high molecule‐loading capacity and that they enable the high‐efficiency transport of signal reporters and drugs for cellular imaging and drug delivery, respectively.     

DNA Origami Post‐Processing by CRISPR‐Cas12a

Customizable nanostructures built through the DNA‐origami technique hold tremendous promise in nanomaterial fabrication and biotechnology. Despite the cutting‐edge tools for DNA‐origami design and preparation, it remains challenging to separate structural components of an architecture built from—thus held together by—a continuous scaffold strand, which in turn limits the modularity and function of the DNA‐origami devices. To address this challenge, here we present an enzymatic method to clean up and reconfigure DNA‐origami structures. We target single‐stranded (ss) regions of DNA‐origami structures and remove them with CRISPR‐Cas12a, a hyper‐active ssDNA endonuclease without sequence specificity. We demonstrate the utility of this facile, selective post‐processing method on DNA structures with various geometrical and mechanical properties, realizing intricate structures and structural transformations that were previously difficult to engineer. Given the biocompatibility of Cas12a‐like enzymes, this versatile tool may be programmed in the future to operate functional nanodevices in cells.     

Reconfigurable T‐junction DNA Origami

DNA self‐assembly allows the construction of nanometre‐scale structures and devices. Structures with thousands of unique components are routinely assembled in good yield. Experimental progress has been rapid, based largely on empirical design rules. Herein, we demonstrate a DNA origami technique designed as a model system with which to explore the mechanism of assembly. The origami fold is controlled through single‐stranded loops embedded in a double‐stranded DNA template and is programmed by a set of double‐stranded linkers that specify pairwise interactions between loop sequences. Assembly is via T‐junctions formed by hybridization of single‐stranded overhangs on the linkers with the loops. The sequence of loops on the template and the set of interaction rules embodied in the linkers can be reconfigured with ease. We show that a set of just two interaction rules can be used to assemble simple T‐junction origami motifs and that assembly can be performed at room temperature.     

Gold‐Nanoparticle‐Mediated Jigsaw‐Puzzle‐like Assembly of Supersized Plasmonic DNA Origami

DNA origami has rapidly emerged as a powerful and programmable method to construct functional nanostructures. However, the size limitation of approximately 100 nm in classic DNA origami hampers its plasmonic applications. Herein, we report a jigsaw‐puzzle‐like assembly strategy mediated by gold nanoparticles (AuNPs) to break the size limitation of DNA origami. We demonstrated that oligonucleotide‐functionalized AuNPs function as universal joint units for the one‐pot assembly of parent DNA origami of triangular shape to form sub‐microscale super‐origami nanostructures. AuNPs anchored at predefined positions of the super‐origami exhibited strong interparticle plasmonic coupling. This AuNP‐mediated strategy offers new opportunities to drive macroscopic self‐assembly and to fabricate well‐defined nanophotonic materials and devices.     

DNA Origami Directed Assembly of Gold Bowtie Nanoantennas for Single‐Molecule Surface‐Enhanced Raman Scattering

Metallic bowtie nanoarchitectures can produce dramatic electric field enhancement, which is advantageous in single‐molecule analysis and optical information processing. Plasmonic bowtie nanostructures were successfully constructed using a DNA origami‐based bottom‐up assembly strategy, which enables precise control over the geometrical configuration of the bowtie with an approximate 5 nm gap. A single Raman probe was accurately positioned at the gap of the bowtie. Single‐molecule surface‐enhanced Raman scattering (SM‐SERS) of individual nanostructures, including ones containing an alkyne group, was observed. The design achieved repeatable local field enhancement of several orders of magnitude. This method opens the door on a novel strategy for the fabrication of metal bowtie structures and SM‐SERS, which can be utilized in the design of highly‐sensitive photonic devices.