Nanobody‐Conjugated Nanotubes for Targeted Near‐Infrared In Vivo Imaging and Sensing

Fluorescent nanomaterials such as single‐walled carbon nanotubes (SWCNTs) have many advantages in terms of their photophysics, but it is difficult to target them to specific locations in living systems. In contrast, the green fluorescent protein (GFP) has been genetically fused to proteins in many cells and organisms. Therefore, GFP can be seen not only as a fluorophore but as a universal target/handle. Here, we report the conjugation of GFP‐binding nanobodies to DNA‐wrapped SWCNTs. This approach combines the targeting capabilities of GFP‐binding nanobodies and the nonbleaching near‐infrared fluorescence (850–1700 nm) of SWCNTs. These conjugates allow us to track single Kinesin‐5‐GFP motor proteins in developing embryos of Drosophila melanogaster. Additionally, they are sensitive to the neurotransmitter dopamine and can be used for targeted sensing of dopamine in the nm regime.     

Near-infrared fluorescence spectroscopy of single-walled carbon nanotubes and its applications

Semiconducting single-walled carbon nanotubes (SWCNTs) emit fluorescence at near-infrared (NIR) wavelengths that are characteristic of the specific diameter and the chiral angle. While providing a convenient method for structural identification of semiconducting SWCNTs, NIR fluorescence of SWCNTs also offers a powerful approach for sensor development and in vivo or real-time imaging of biological systems.This article provides an introductory overview of the approaches to obtaining individually dispersed semiconducting SWCNTs with reasonably good purity, which is a critical step in acquiring NIR fluorescence spectra. It also summarizes the progress since 2002 in sensor design and applications in bioimaging in vitro and in vivo using NIR fluorescence of semiconducting SWCNTs.     

Efficient NIR‐Light Emission from Solid‐State Complexes of Boron Difluoride with 2′‐Hydroxychalcone Derivatives

This article describes a series of nine complexes of boron difluoride with 2′‐hydroxychacone derivatives. These dyes were synthesized very simply and exhibited intense NIR emission in the solid state. Complexation with boron was shown to impart very strong donor–acceptor character into the excited state of these dyes, which further shifted their emission towards the NIR region (up to 855 nm for dye 5 b , which contained the strongly donating triphenylamine group). Strikingly, these optical features were obtained for crystalline solids, which are characterized by high molecular order and tight packing, two features that are conventionally believed to be detrimental to luminescence in organic crystals. Remarkably, the emission of light from the π‐stacked molecules did not occur at the expense of the emission quantum yield. Indeed, in the case of pyrene‐containing dye 4 , for example, a fluorescence quantum yield of about 15 % with a fluorescence emission maximum at 755 nm were obtained in the solid state. Moreover, dye 3 a and acetonaphthone‐based compounds 1 b , 2 b , and 3 b showed no evidence of degradation as solutions in CH₂Cl₂ that contained EtOH. In particular, solutions of brightly fluorescent compound 3 a (brightness: ε×Φ_f=45 000 M ^?1 cm^?1) could be stored for long periods without any detectable changes in its optical properties. All together, these new dyes possess a set of very interesting properties that make them promising solid‐state NIR fluorophores for applications in materials science.     

Near-Infrared Fluorescence Lifetime Imaging of Biomolecules with Carbon Nanotubes**

Single-walled carbon nanotubes (SWCNTs) are versatile near infrared (NIR) fluorescent building blocks for biosensors. Their surface is chemically tailored to respond to analytes by a change in fluorescence. However, intensity-based signals are easily affected by external factors such as sample movements. Here, we demonstrate fluorescence lifetime imaging microscopy (FLIM) of SWCNT-based sensors in the NIR. We tailor a confocal laser scanning microscope (CLSM) for NIR signals (>800 nm) and employ time correlated single photon counting of (GT)₁₀-DNA functionalized SWCNTs. They act as sensors for the important neurotransmitter dopamine. Their fluorescence lifetime (>900 nm) decays biexponentially and the longer lifetime component (370 ps) increases by up to 25 % with dopamine concentration. These sensors serve as paint to cover cells and report extracellular dopamine in 3D via FLIM. Therefore, we demonstrate the potential of fluorescence lifetime as a readout of SWCNT-based NIR sensors.     

Far‐Red/Near‐Infrared Emissive (1,3‐Dimethyl)barbituric Acid‐Based AIEgens for High‐Contrast Detection of Metastatic Tumors in the Lung

Despite of the enthusiastic research in aggregation‐induced emission luminogens (AIEgens) in recent years, the ones that can be smoothly used for sophisticated biomedical applications such as in vivo bioimaging of pulmonary metastatic tumors during surgery are still limited. Herein, we report the design and synthesis of a new series of far‐red/near‐infrared (FR/NIR) fluorescent AIEgens that consist of methoxy‐substituted tetraphenylethene (TPE) as the electron‐donating moiety, (1,3‐dimethyl)barbituric acid as the electron‐withdrawing moiety, and different π‐bridge units. As compared to benzene or 3,4‐ethylenedioxythiophene, using thiophene as the π‐conjugation unit between the donor and acceptor results in a relatively higher absolute fluorescence quantum yield (14.5 %) in water when formulating the corresponding AIEgens into nanoparticles (AIE dots) with an amphiphilic co‐polymer as the doping matrix. The highly FR/NIR‐emissive thiophene‐based AIE dots are demonstrated to be potent for intraoperative detection of pulmonary metastatic tumors, particularly the micro‐sized ones, with excellent signal‐to‐background ratio.     

Synthesis of 7,8‐Dehydropurpurin Dimers and Their Conversion into Conformationally Constrained β‐to‐β Vinylene‐Bridged Porphyrin Dimers

7,8‐Dehydropurpurin has attracted much attention owing to the dual 18π‐ and 20π‐electron circuits in its macrocyclic conjugation. The two‐fold Pd‐catalyzed [3+2] annulation of meso‐bromoporphyrin with 1,4‐diphenylbutadiyne furnished 7,8‐dehydropurpurin dimers. The 8^a,8^a‐linked dimer displays a red‐shifted and enhanced absorption band in the NIR region and a small electrochemical HOMO–LUMO band gap as a consequence of efficient conjugation between the two coplanar 7,8‐dehydropurpurin units. Treatment of this dimer with N‐bromosuccinimide in chloroform and ethanol gave β‐to‐β vinylene‐bridged porphyrin dimers. Owing to the highly constrained conformations, these dimers exhibit perturbed absorption spectra, small Stokes shifts, and high fluorescence quantum yields.     

Capillary electrophoresis of covalently functionalized single‐chirality carbon nanotubes

We demonstrate the separation of chirality‐enriched single‐walled carbon nanotubes (SWCNTs) by degree of surface functionalization using high‐performance CE. Controlled amounts of negatively charged and positively charged functional groups were attached to the sidewall of chirality‐enriched SWCNTs through covalent functionalization using 4‐carboxybenzenediazonium tetrafluoroborate or 4‐diazo‐N,N‐diethylaniline tetrafluoroborate, respectively. Surfactant‐ and pH‐dependent studies confirmed that under conditions that minimized ionic screening effects, separation of these functionalized SWCNTs was strongly dependent on the surface charge density introduced through covalent surface chemistry. For both heterogeneous mixtures and single‐chirality‐enriched samples, covalently functionalized SWCNTs showed substantially increased peak width in electropherogram spectra compared to nonfunctionalized SWCNTs, which can be attributed to a distribution of surface charges along the functionalized nanotubes. Successful separation of functionalized single‐chirality SWCNTs by functional density was confirmed with UV‐Vis‐NIR absorption and Raman scattering spectroscopies of fraction collected samples. These results suggest a high degree of structural heterogeneity in covalently functionalized SWCNTs, even for chirality‐enriched samples, and show the feasibility of applying CE for high‐performance separation of nanomaterials based on differences in surface functional density.     

Probing the Chemical Functionalization of Single‐Walled Carbon Nanotubes with Multiple Carbon Ad‐Dimer Defects

Drying‐tube‐shaped single‐walled carbon nanotubes (SWCNTs) with multiple carbon ad‐dimer (CD) defects are obtained from armchair (n,n,m) SWCNTs (n=4, 5, 6, 7, 8; m=7, 13). According to the isolated‐pentagon rule (IPR) the drying‐tube‐shaped SWCNTs are unstable non‐IPR species, and their hydrogenated, fluorinated, and chlorinated derivatives are investigated. Interestingly, chemisorptions of hydrogen, fluorine, and chlorine atoms on the drying tube‐shaped SWCNTs are exothermic processes. Compared to the reaction energies for binding of H, F, and Cl atoms to perfect and Stone–Wales‐defective armchair (5,5) nanotubes, binding of F with the multiply CD defective SWCNTs is stronger than with perfect and Stone–Wales‐defective nanotubes. The reaction energy for per F₂ addition is between 85 and 88 kcal mol^?1 more negative than that per H₂ addition. Electronic structure analysis of their energy gaps shows that the CD defects have a tendency to decrease the energy gap from 1.98–2.52 to 0.80–1.17 eV. After hydrogenation, fluorination, and chlorination, the energy gaps of the drying‐tube‐shaped SWCNTs with multiple CD defects are substantially increased to 1.65–3.85 eV. Furthermore, analyses of thermodynamic stability and nucleus‐independent chemical shifts (NICS) are performed to analyze the stability of these molecules.     

N‐Annulated Perylene‐Substituted and Fused Porphyrin Dimers with Intense Near‐Infrared One‐Photon and Two‐Photon Absorption

Fusion of two N‐annulated perylene (NP) units with a fused porphyrin dimer along the S₀–S₁ electronic transition moment axis has resulted in new near‐infrared (NIR) dyes 1 a / 1 b with very intense absorption (ε>1.3×10⁵ M ^?1 cm^?1) beyond 1250 nm. Both compounds displayed moderate NIR fluorescence with fluorescence quantum yields of 4.4×10^?6 and 6.0×10^?6 for 1 a and 1 b , respectively. The NP‐substituted porphyrin dimers 2 a / 2 b have also been obtained by controlled oxidative coupling and cyclodehydrogenation, and they showed superimposed absorptions of the fused porphyrin dimer and the NP chromophore. The excited‐state dynamics of all of these compounds have been studied by femtosecond transient absorption measurements, which revealed porphyrin dimer‐like behaviour. These new chromophores also exhibited good nonlinear optical susceptibility with large two‐photon absorption cross‐sections in the NIR region due to extended π‐conjugation. Time‐dependent density functional theory calculations have been performed to aid our understanding of their electronic structures and absorption spectra.     

Rational Design of a Near‐infrared Fluorescence Probe for Ca2+ Based on Phosphorus‐substituted Rhodamines Utilizing Photoinduced Electron Transfer

Fluorescence imaging in the near‐infrared (NIR) region (650–900 nm) is useful for bioimaging because background autofluorescence is low and tissue penetration is high in this range. In addition, NIR fluorescence is useful as a complementary color window to green and red for multicolor imaging. Here, we compared the photoinduced electron transfer (PeT)‐mediated fluorescence quenching of silicon‐ and phosphorus‐substituted rhodamines (SiRs and PRs) in order to guide the development of improved far‐red to NIR fluorescent dyes. The results of density functional theory calculations and photophysical evaluation of a series of newly synthesized PRs confirmed that the fluorescence of PRs was more susceptible than that of SiRs to quenching via PeT. Based on this, we designed and synthesized a NIR fluorescence probe for Ca²⁺, CaPR‐1 , and its membrane‐permeable acetoxymethyl derivative, CaPR‐1 AM , which is distributed to the cytosol, in marked contrast to our previously reported Ca²⁺ far‐red to NIR fluorescence probe based on the SiR scaffold, CaSiR‐1 AM , which is mainly localized in lysosomes as well as cytosol in living cells. CaPR‐1 showed longer‐wavelength absorption and emission (up to 712 nm) than CaSiR‐1 . The new probe was able to image Ca²⁺ at dendrites and spines in brain slices, and should be a useful tool in neuroscience research.     

Arginine Side Chains as a Dispersant for Individual Single‐Wall Carbon Nanotubes

Charged peptides and proteins disperse single‐wall carbon nanotubes (SWCNTs) in aqueous solutions. However, little is known about the role of their side chains in their interactions with SWCNTs. Homopolypeptide–SWCNT systems are ideal for investigating the mechanisms of such interactions. In this study, we demonstrate that SWCNTs are individually dispersed by poly‐L ‐arginine (PLA). The debundled SWCNTs exhibited a distinct fluorescence. The dispersibility of SWCNTs with PLA was greater than that of SWCNTs with poly‐L ‐lysine (PLL). Molecular dynamics simulations suggest that the side chains of PLA have stronger interactions with the sidewalls of SWCNTs compared with those of PLL. The guanidinium group at the end of the side chain of an arginine residue plays an important role in the interaction with SWCNTs, likely through hydrophobic, van der Waals, and π–π interactions. PLA can be useful as a tool for the dispersion of SWCNTs and can be used to non‐covalently anchor materials to SWCNTs with strong binding.     

Tm3+‐Sensitized NIR‐II Fluorescent Nanocrystals for In Vivo Information Storage and Decoding

In vivo fluorescence imaging in the second near‐infrared window (NIR‐II) affords deep‐tissue penetration and high spatial resolution. Herein, we present a new type of Tm³⁺‐sensitized lanthanide nanocrystals with both excitation (1208 nm) and emission (1525 nm) located in the NIR‐II window for in vivo optical information storage and decoding. Taking advantage of the tunable fluorescence lifetimes, the optical multiplexed encoding capacity is enhanced accordingly. Micro‐devices with QR codes featuring the NIR‐II fluorescence‐lifetime multiplexed encoding were implanted into mice and were successfully decoded through time‐gated fluorescence imaging technology.     

Pheophytin Derived Near‐Infrared‐Light Responsive Carbon Dot Assembly as a New Phototheranotic Agent for Bioimaging and Photodynamic Therapy

Carbon dots (CDs), a kind of phototheranostic agent with the capability of simultaneous bioimaging and phototherapy [i.e., photodynamic therapy (PDT) or photothermal therapy (PTT)], have received considerable attention because of their remarkable properties, including flexibility for surface modification, high biocompatibility, low toxicity and photo‐induced activity for malignant tumor cells. Among numerous carbon sources, it has been found that natural biomass are good candidates for the preparation of CD phototheranostic agents. In this study, pheophytin, a type of Mg‐free chlorophyll derivative and also a natural product with low toxicity, was used as a raw carbon source for the synthesis of CDs by using a microwave method. The obtained hydrophobic CDs exhibited a maximum near‐infrared (NIR) emission peak at approximately 680 nm, and high singlet oxygen (¹O₂) generation with a quantum yield of 0.62. The self‐assembled CDs from the as‐prepared CDs with DSPE‐mPEG2000 retained efficient ¹O₂ generation. The obtained carbon dot assembly was not only an efficient fluorescence (FL) imaging agent but also a smart PDT agent. Our studies indicated that the obtained hydrophilic CD assembly holds great potential as a new phototheranostic agent for cancer therapy. This work provides a new route for synthesis of CDs and proposes a readily available candidate for tumor treatment.     

Highly Efficient Near‐Infrared Organic Light‐Emitting Diode Based on a Butterfly‐Shaped Donor–Acceptor Chromophore with Strong Solid‐State Fluorescence and a Large Proportion of Radiative Excitons

The development of near‐infrared (NIR) organic light‐emitting diodes (OLEDs) is of growing interest. Donor–acceptor (D–A) chromophores have served as an important class of NIR materials for NIR OLED applications. However, the external quantum efficiencies (EQEs) of NIR OLEDs based on conventional D–A chromophores are typically below 1 %. Reported herein is a butterfly‐shaped D–A compound, PTZ‐BZP. A PTZ‐BZP film displayed strong NIR fluorescence with an emission peak at 700 nm, and the corresponding quantum efficiency reached 16 %. Remarkably, the EQE of the NIR OLED based on PTZ‐BZP was 1.54 %, and a low efficiency roll‐off was observed, as well as a high radiative exciton ratio of 48 %, which breaks through the limit of 25 % in conventional fluorescent OLEDs. Experimental and theoretical investigations were carried out to understand the excited‐state properties of PTZ‐BZP.     

Luminescence Color Tuning from Blue to Near Infrared of Stable Luminescent Solid Materials Based on Bis‐o‐Carborane‐Substituted Oligoacenes

Aryl‐substituted o ‐carboranes have shown highly efficient solid‐state emission in previous studies. To demonstrate color tuning of the solid‐state emission in an aryl‐o ‐carborane‐based system, bis‐o ‐carborane‐substituted oligoacenes were synthesized and their properties were systematically investigated. Optical and electrochemical measurements revealed efficient decreases in energy band gaps and lowest unoccupied molecular orbital (LUMO) levels by adding a number of fused benzene rings for the extension of π‐conjugation. As a consequence, bright solid‐state emission was observed in the region from blue to near infrared (NIR). Furthermore, various useful features were obtained from the modified o ‐carboranes as an optical material. The naphthalene derivatives exhibited aggregation‐induced emission (AIE) and almost 100 % quantum efficiency in the crystalline state. Furthermore, it was shown that the tetracene derivative with NIR‐emissive properties had high durability toward photo‐bleaching under UV irradiation.     

Rational Design of Emissive NIR‐Absorbing Chromophores: RhIII Porphyrin‐Aza‐BODIPY Conjugates with Orthogonal Metal–Carbon Bonds

The facile synthesis of Group 9 Rh^III porphyrin‐aza‐BODIPY conjugates that are linked through an orthogonal Rh?C(aryl) bond is reported. The conjugates combine the advantages of the near‐IR (NIR) absorption and intense fluorescence of aza‐BODIPY dyes with the long‐lived triplet states of transition metal rhodium porphyrins. Only one emission peak centered at about 720 nm is observed, irrespective of the excitation wavelength, demonstrating that the conjugates act as unique molecules rather than as dyads. The generation of a locally excited (LE) state with intramolecular charge‐transfer (ICT) character has been demonstrated by solvatochromic effects in the photophysical properties, singlet oxygen quantum yields in polar solvents, and by the results of density functional theory (DFT) calculations. In nonpolar solvents, the Rh^III conjugates exhibit strong aza‐BODIPY‐centered fluorescence at around 720 nm (Φ_F=17–34 %), and negligible singlet oxygen generation. In polar solvents, enhancements of the singlet‐oxygen quantum yield (Φ_Δ=19–27 %, λ_ex=690 nm) have been observed. Nanosecond pulsed time‐resolved absorption spectroscopy confirms that relatively long‐lived triplet excited states are formed. The synthetic methodology outlined herein provides a useful strategy for the assembly of functional materials that are highly desirable for a wide range of applications in material science and biomedical fields.     

Modified SWCNTs with Amphoteric Redox and Solubilizing Properties

A complementary double‐covalent functionalization of single‐wall carbon nanotubes (SWCNTs) that involves both solubilizing ionic liquids and electroactive moieties is reported. Our strategy is a simple and efficient methodology based on the stepwise functionalization of the nanotube surface with two different organic moieties. In a first instance, oxidized SWCNTs are amidated with ionic liquid precursors, and further treated with n‐butyl bromide to afford SWCNTs functionalized with 1‐butylimidazolium bromide. This approach allows tuneable polarity induced by anion exchange, which has an effect on the relative solubility of the modified SWCNTs in water. Subsequently, a 1,3‐dipolar cycloaddition reaction was performed to introduce the electron‐acceptor 11,11,12,12‐tetracyano‐9,10‐anthra‐para‐quinodimethane (TCAQ) unit on the SWCNTs. Furthermore, to evaluate the influence of the functional group position, the TCAQ electroactive molecule was anchored through an esterification reaction onto previously oxidized SWCNTs, followed by the Tour reaction to introduce the ionic liquid functions. IR and Raman spectroscopies, thermogravimetric analysis (TGA), UV/Vis/NIR spectroscopy, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS) were employed and clearly confirmed the double‐covalent functionalization of the SWCNTs.     

Highly Luminescent N‐Doped Carbon Quantum Dots as an Effective Multifunctional Fluorescence Sensing Platform

The doping of carbon quantum dots with nitrogen provides a promising direction to improve fluorescence performance and broaden their applications in sensing systems. Herein we report a one‐pot solvothermal synthesis of N‐doped carbon quantum dots (NCQDs) and the synthesis of a series of NCQDs with different nitrogen contents. The as‐prepared NCQDs were compared with carbon quantum dots (CQDs); the introduction of nitrogen atoms largely increased the quantum yield of NCQDs and highest emission efficiency is up to 36.3 %. The fluorescence enhancement may originate from more polyaromatic structures induced by incorporated nitrogen atoms and protonation of nitrogen atoms on dots. It was found that NCQDs can act as a multifunctional fluorescence sensing platform because they can be used to detect pH values, Ag^I, and Fe^III in aqueous solution. The fluorescence intensity of NCQDs is inversely proportional to pH values across a broad range from 5.0 to 13.5, which indicates that NCQDs can be devised as an effective pH indicator. Selective detection of Ag^I and Fe^III was achieved based on their distinctive fluorescence influence because Ag^I can significantly enhance the fluorescence whereas Fe^III can greatly quench the fluorescence. The quantitative determination of Ag^I can be accomplished with NCQDs by using the linear relationship between fluorescence intensity of NCQDs and concentration of Ag^I. The sensitive detection of H₂O₂ was developed by taking advantage of the distinct quenching ability of Fe^III and Fe^II toward the fluorescence of NCQDs. Cellular toxicity test showed NCQDs still retain low toxicity to cells despite the introduction of a great deal of nitrogen atoms. Moreover, bioimaging experiments demonstrated that NCQDs have stronger resistance to photobleaching than CQDs and more excellent fluorescence labeling performance.     

Thiol‐Directed Synthesis of Highly Fluorescent Gold Clusters and Their Conversion into Stable Imaging Nanoprobes

Fluorescent gold clusters (FGCs) with tunable emission from blue to red and quantum yields in the range of 6–17 % have been synthesized by simple modification of the conditions used for the synthesis of gold nanoparticles, namely by replacing the stronger reducing agent with a controlled amount of thiol. Various functional FGCs with hydrodynamic diameters of 5–12 nm have been successfully synthesized and used as cell labels. The results of our investigations strongly indicate that FGCs composed of Au⁰ are more stable imaging probes than commonly reported red/NIR‐emitting FGCs with a composition of Au⁰/Au^I, as this combination rapidly transforms into nonfluorescent large clusters on exposure to light. The FGC‐based nanoprobes reported herein exhibit stable fluorescence upon continuous light exposure and can be used as imaging probes with low cytotoxicity.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.