Ultrahigh Branching of Main-Chain-Functionalized Polyethylenes by Inverted Insertion Selectivity

Branched polyolefin microstructures resulting from so-called “chain walking” are a fascinating feature of late transition metal catalysts; however, to date it has not been demonstrated how desirable branched polyolefin microstructures can be generated thereby. We demonstrate how highly branched polyethylenes with methyl branches (220 Me/1000 C) exclusively and very high molecular weights (ca. 10⁶ g mol⁻¹), reaching the branch density and microstructure of commercial ethylene–propylene elastomers, can be generated from ethylene alone. At the same time, polar groups on the main chain can be generated by in-chain incorporation of methyl acrylate. Key to this strategy is a novel rigid environment in an α-diimine Pd^II catalyst with a steric constraint that allows for excessive chain walking and branching, but restricts branch formation to methyl branches, hinders chain transfer to afford a living polymerization, and inverts the regioselectivity of acrylate insertion to a 1,2-mode.     

Highly Robust Palladium(II) α‐Diimine Catalysts for Slow‐Chain‐Walking Polymerization of Ethylene and Copolymerization with Methyl Acrylate

A series of sterically demanding α‐diimine ligands bearing electron‐donating and electron‐withdrawing substituents were synthesized by an improved synthetic procedure in high yield. Subsequently, the corresponding Pd complexes were prepared and isolated by column chromatography. These Pd complexes demonstrated unique properties in ethylene polymerization, including high thermal stability and high activity, thus generating polyethylene with a high molecular weight and very low branching density. Similar properties were observed for ethylene/methyl acrylate copolymerization. Because of the high molecular weight and low branching density, the generated polyethylene and ethylene/methyl acrylate copolymer were semicrystalline solids. The (co)polymers had unique microstructures originating from the unique slow‐chain‐walking activity of these Pd complexes.     

Cationic para‐phenyl‐substituted α‐diimine nickel catalyzed ethylene and 4‐methyl‐1‐pentene (co)polymerizations via living/controlled chain‐walking

Upon activation with diethylaluminium chloride (Et₂AlCl), a series of phenyl‐substituted α‐diimine nickel precatalysts conducted 4‐methyl‐1‐pentene (4MP) and ethylene (E) (co)polymerizations via controlled chain‐walking to generate branched amorphous polymers with high molecular weight and narrow molecular weight distribution (M_w/M_n < 1.6). The obtained poly(4MP)s were amorphous elastomers with glass transition temperature (T_g) of ?10 ~ ?24 °C, which are higher than that of E‐4MP copolymer ( ? 63.0 °C). At room temperature (25 °C), 4MP polymerization proceeds in a living manner. The microstructures of the produced poly(4MP)s indicated the 2,1‐ and 1,2‐insertion followed by chain‐walking, the latter being predominant. The NMR analyses of the polymers showed that the obtained poly(4MP) possessed methyl, isobutyl, 2,4‐dimethylpentyl and 2‐methylhexyl groups, while the isobutyl and 2,4‐dimethylalkyl branches derived from 4MP were observed in the E‐4MP copolymer. The branch structures and the insertion‐type of monomer were depended on the polymerization temperature, and the content of methyl branch increased with an increase in the polymerization temperature.     

A Self‐Supporting Strategy for Gas‐Phase and Slurry‐Phase Ethylene Polymerization using Late‐Transition‐Metal Catalysts

The polyolefin industry is dominated by gas‐phase and slurry‐phase polymerization using heterogeneous catalysts. In contrast, academic research is focused on homogeneous systems, especially for late‐transition‐metal catalysts. The heterogenization of homogeneous catalysts is a general strategy to provide catalyst solutions for existing industrial polyolefin synthesis. Herein, we report an alternative, potentially general strategy for using homogeneous late‐transition‐metal catalysts in gas‐phase and slurry‐phase polymerization. In this self‐supporting strategy, catalysts with moderate chain‐walking capabilities produced porous polymer supports during gas‐phase ethylene polymerization. Chain walking, in which the metal center can move up and down the polymer chain during polymerization, ensures that the metal center can travel along the polymer chain to find suitable sites for ethylene enchainment. This strategy enables simple heterogenization of catalysts on solid supports for slurry‐phase polymerization. Most importantly, various branched ultra‐high‐molecular‐weight polyethylenes can be prepared under various polymerization conditions with proper catalyst selection.     

Ethylene and 1‐hexene copolymerization with CO‐prereduced phillips CrOx/SiO2 catalyst in the presence of Al–alkyl cocatalyst

Phillips catalyst has been contributing to about 40% of world high‐density polyethylene production because of its ability to give products with unique microstructures like broad molecular weight distribution as well as short and long chain branches. Even after 50 years' effort, some crucial problems concerning the nature of active sites, polymerization, and branching mechanisms are still kept mysterious. In this work, ethylene and 1‐hexene copolymerization with Phillips catalyst prereduced by CO was carried out in the presence of triethyl aluminum (TEA) cocatalyst. The microstructures of polymers were investigated by ¹³C NMR and gel permeation chromatography (GPC) methods. A hybrid‐type kinetics was found for both homo‐ and copolymerization kinetics, which indicated that there existed two types of active sites namely site A and site B. Site A with instant activation, high activity, and fast decay was transformed from a metathesis site, namely Cr(II) site, coordinated with CO or CO₂ through desorption of CO or CO₂ by TEA, which contributed to the formation of short chain branches, especially methyl branches. Site B with slow activation, low activity, and slow decay was generated from reduction of residual chromate (VI) by TEA. Both 1‐hexene and TEA can decrease the molecular weight of polyethylene as well as enhance short chain branching. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4632–4641, 2005     

Synthesis of long‐chain‐branched polyethylene by ethylene homopolymerization with a novel nickel(II) α‐diimine catalyst

Long‐chain‐branched polyethylene with a broad or bimodal molecular weight distribution was synthesized by ethylene homopolymerization via a novel nickel(II) α‐diimine complex of 2,3‐bis(2‐phenylphenyl)butane diimine nickel dibromide ({[2‐C₆H₄(C₆H₅)]? N?C? (CH₃)C(CH₃)?N? [2‐C₆H₄(C₆H₅)]}NiBr₂) that possessed two stereoisomers in the presence of modified methylaluminoxane. The influences of the polymerization conditions, including the temperature and Al/Ni molar ratio, on the catalytic activity, molecular weight and molecular weight distribution, degree of branching, and branch length of polyethylene, were investigated. The resultant products were confirmed by gel permeation chromatography, gas chromatography/mass spectrometry, and ¹³C NMR characterization to be composed of higher molecular weight polyethylene with only isolated long‐branched chains (longer than six carbons) or with methyl pendant groups and oligomers of linear α‐olefins. The long‐chain‐branched polyethylene was formed mainly through the copolymerization of ethylene growing chains and macromonomers of α‐olefins. The presence of methyl pendant groups in the polyethylene main chain implied a 2,1‐insertion of the macromonomers into [Ni]? H active species. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1325–1330, 2005     

Synthesis of branched polyethylenes by the tandem catalysis of silica‐supported linked cyclopentadienyl‐amido titanium catalysts and a homogeneous dibromo nickel catalyst having a pyridylimine ligand

The synthesis of branched polyethylenes by ethylene polymerization with new tandem catalyst systems consisting of methylaluminoxane‐preactivated linked cyclopentadienyl‐amido titanium catalysts [Ti(η⁵:η¹‐C₅Me₄SiMe₂NR)Cl₂ (R = Me or ^tBu)] supported on pyridylethylsilane‐modified silica (PySTiNMe and PySTiN^tBu) and homogeneous dibromo nickel catalyst having a pyridyl‐2,6‐diisopropylphenylimine ligand (PyminNiBr₂) in the presence of modified methylaluminoxane was investigated. Ethylene polymerization with only PyminNiBr₂ yielded a mixture of 1‐ and 2‐olefin oligomers with methyl branches [weight‐average molecular weight (M_w) ～ 460)] with a ratio of about 1:7. By the combination of this nickel catalyst with PySTiN^tBu, polyethylenes with long‐chain branches (M_w = 15,000–50,000) were produced. No incorporation of 2‐olefin oligomers was observed in the ¹³C NMR spectra. Unexpectedly, the combination of the nickel catalyst with PySTiNMe produced lower molecular weight polyethylenes with only methyl branches. The molecular weight distributions of branched polyethylenes obtained with both PySTiNMe and PySTiN^tBu combined with the nickel catalyst were broad (weight‐average molecular weight/number‐average molecular weight < 9). Bimodal gel permeation chromatography (GPC) curves were clearly observed in the PySTiNMe system, whereas GPC curves with small shoulders in low molecular weight areas were observed for PySTiN^tBu. The synthesis of branched polyethylenes with tandem catalyst systems of corresponding homogeneous titanium catalysts and the nickel catalyst was also investigated for comparison. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 528–544, 2003     

New chiral α‐diimine nickel(II) complexes bearing ortho‐sec‐phenethyl groups for ethylene polymerization

A series of new α‐diimine nickel(II) catalysts bearing bulky chiral sec‐phenethyl groups have been synthesized and characterized. The molecular structure of representative chiral ligand, bis[N,N′‐(4‐methyl‐2,6‐di‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane rac‐1c and chiral complexes, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2a and bis{bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2b, were confirmed by X‐ray crystallographic analysis. Complex rac‐2c bearing two chiral sec‐phenethyl groups in the ortho‐aryl position and a methyl group in the para‐aryl position, activated by diethylaluminum chloride (DEAC), showed highly catalytic activity for the polymerization of ethylene [4.12 × 10⁶ g PE (mol Ni.h.bar)^?1], and produced highly branched polyethylenes under low ethylene pressure (branching degree: 104, 118 and 126 branches/1000 C at 20, 40 and 60°C, respectively). Chiral 20‐electron bis‐α‐diimine Ni(II) complex rac‐2b also exhibited high activity toward ethylene polymerization [1.71 × 10⁶ g PE (mol Ni · h · bar)^?1]. The type and amount of branches of the polyethylenes obtained were determined by ¹H and ¹³C NMR. Copyright © 2013 John Wiley & Sons, Ltd.     

Computer modeling of the crystallization process of single‐chain ethylene/1‐hexene copolymers from dilute solutions

Langevin molecular dynamics (LMD) simulations have been performed to understand the role of the short chain branches (SCB) on the formation of ordered domains by cooling dilute solutions of ethylene/α‐olefins copolymer models. Three different long single‐chain models (C₂₀₀₀) with 0, 5, and 10 branches each 1000 carbons were selected. These models were equilibrated at high reduced temperature (T* = 13.3) and cooling in steps of 0.45 until the final temperature (T* = 6.2) by running a total of 35 × 10⁶ LMD steps. During the cooling process, global order parameter, torsion distribution, position of the branches, and local‐bond order parameter were calculated and monitored. The peaks of crystallization for each model were calculated by differentiating the global order parameter with temperature. The T_c (crystallization temperature) decreases as the number of branches increases as has been experimentally reported. The formation of order in the copolymers is affected by the amount of the SCB in the backbone of the polymer chain. Initially, the SCB move to the folding surface. Once the SCB are located near the folding surface the order starts to grow. In all cases here shown, the C₄ branches are excluded from the ordered domains. To take into account, the influence of the branch distribution, a different branch distribution model has been considered for the two‐branched systems. The crystallization fraction (α) and the density of the amorphous and ordered fractions was defined using the local‐bond order parameter. Both magnitudes decrease as the number of branches increases. These facts fairly agree with experimental literature data. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Olefin Polymerization Catalyzed by Double‐Decker Dipalladium Complexes: Low Branched Poly(α‐Olefin)s by Selective Insertion of the Monomer Molecule

Dipalladium complexes of a cyclic bis(diimine) ligand with a double‐decker structure catalyze polymerization of ethylene and α‐olefins and copolymerization of ethylene with 1‐hexene. The polymerization of 1‐hexene yields a polymer that is mainly composed of the hexamethylene unit formed by 2,1‐insertion of the monomer into the palladium–carbon bond, followed by chain‐walking (6,1‐insertion). The polymerization of 4‐methyl‐1‐pentene proceeds by 2,1‐insertion with a selectivity of 92–97 %, and affords the polymer with methyl and 2‐methylhexyl branches. 2,1‐Insertion occurs selectively in all of the polymerization reactions of α‐olefins catalyzed by the dipalladium complexes. Ethylene polymerization with the catalyst at 100 °C lasts over 24 h, whereas the monopalladium–diimine catalyst loses its activity within 8 h at 60 °C. Polyethylene obtained by the dipalladium catalyst is less‐branched and has a higher molecular weight compared to that of the monopalladium catalyst under the same conditions. Copolymerization of ethylene with 1‐hexene affords solid products with melting points and molecular weights that vary depending on the polymerization time, suggesting formation of a block and/or gradient copolymer.     

Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A styryl tipno‐based nitroxide as efficient mediator for the synthesis of multiblock polystyrenes and well‐grafted polymers

The chloromagnesium exchange of 4‐chlorostyrene provides an easy access to a new versatile polymerizable 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide (TIPNO)‐based nitroxide. Indeed, first, its alkoxyamine based on the α‐methyl benzyl radical fragment efficiently mediates the polymerization of styrene (respectively n‐butyl acrylate) to yield branched polystyrene [respectively poly(n‐butyl acrylate)] with alkoxyamine function as branch point and well‐defined branches. Second, the self‐condensing of this polymerizable nitroxide by manganese coupling affords a mixture of oligomeric linear polyalkoxyamines. Polymerization of styrene mediated with these polyalkoxyamines gives multiblock polystyrenes with alkoxyamine group as linker between polystyrene blocks and exhibits the following features: the synthesis of the polystyrene blocks is controlled as their average molecular weight M_n(block) increases linearly with conversion and their average dispersity M_w/M_n(block) decreases with it. At a given temperature, the molecular weight and the dispersity of the polyalkoxyamines weakly impact M_n(block) and M_w/M_n(block). In contrast, the molecular weight of the multiblock polystyrene increases linearly with conversion until reaching a constant value. The number of block is independent of the molecular weight of the polyalkoxyamines. These unusual results can be explained by the fact that during polymerization, mediating TIPNO‐based polymeric nitroxides with different lengths are generated and are exchanged. Finally the dispersity of the multiblock polystyrene is quite broad and lies between 1.7 and 2.8. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Combination of nitroxide‐mediated polymerization and SET‐LRP for the synthesis of high molar mass branched and star‐branched poly(n‐butyl acrylate) characterized by size exclusion chromatography and rheology

Branched and star‐branched polymers were successfully synthesized by the combination of two successive controlled radical polymerization methods. A series of linear and star poly(n‐butyl acrylate)‐co‐poly(2‐(2‐bromoisobutyryloxy) ethyl acrylate) statistical copolymers, P(nBA‐co‐BIEA)_x, were first synthesized by nitroxide‐mediated polymerization (NMP at T > 100 °C). The subsequent polymerization of n‐butyl acrylate by single electron transfer‐living radical polymerization (SET‐LRP at T = 25 °C), initiated from the brominated sites of the P(nBA‐co‐BIEA)_x copolymer, produced branched or star‐branched poly(n‐butyl acrylate) (PnBA). Both types of polymerizations (NMP and SET‐LRP) exhibited features of a controlled polymerization with linear evolutions of logarithmic conversion versus time and number‐average molar masses versus conversion for final M_n superior to 80,000 g mol^?1. The branched and star‐branched architectures with high molar mass and low number of branches were fully characterized by size exclusion chromatography. The Mark–Houwink Sakurada relationship and the analysis of the contraction factor (g′ = ([η]_branched/[η]_linear)_M) confirmed the elaboration of complex PnBA. The zero‐shear viscosities of the linear, star‐shaped, branched, and star‐branched polymers were compared. The modeling of the rheological properties confirmed the synthesis of the branched architectures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of perfectly bifunctional polyacrylates by single‐electron‐transfer living radical polymerization

Poly(methyl acrylate)s, poly(ethyl acrylate)s, and poly(butyl acrylate)s with α,ω‐di(bromo) chain ends and M_n from 8500 to 35,000 were synthesized by single‐electron‐transfer living radical polymerization (SET‐LRP). The analysis of their chain ends by a combination of ¹H and 2D‐NMR, GPC, MALDI‐TOF MS, chain end functionalization, chain extension, and halogen exchange experiments demonstrated the synthesis of perfectly bifunctional polyacrylates by SET‐LRP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4684–4695, 2007     

Thermoresponsive PPEGMEA‐g‐PPEGEEMA well‐defined double hydrophilic graft copolymer synthesized by successive SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) side chains were synthesized by the combination of single electron transfer‐living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained comb copolymer was treated with lithium diisopropylamide and 2‐bromoisobutyryl bromide to give PPEGMEA‐Br macroinitiator. Finally, PPEGMEA‐g‐PPEGEEMA graft copolymers were synthesized by ATRP of poly(ethylene glycol) ethyl ether methacrylate macromonomer using PPEGMEA‐Br macroinitiator via the grafting‐from route. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept narrow (M_w/M_n ≤ 1.20). This kind of double hydrophilic copolymer was found to be stimuli‐responsive to both temperature and ion (0.3 M Cl^? and SO). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 647–655, 2010     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

Methyl branching in polyethylene from homopolymerization of ethylene with N‐arylcyano‐β‐diketiminate methallyl nickel‐B(C6F5)3

N‐Arylcyano‐β‐diketiminate methallyl nickel complexes activated with B(C₆F₅)₃ were used in the polymerization of ethylene. The microstructure analysis of obtained polyethylene (PE) was done by differential scanning calorimetry and ¹³C nuclear magnetic resonance (NMR). The branched polymer structures produced by these catalysts were attributed to one step isomerization mechanism of the catalyst along the polymer chain. The ortho or para position of the cyano group with co‐ordinated B(C₆F₅)₃ in both methallyl nickel catalysts influenced the polymer molecular weight, branching, and consequently melting and crystallization temperatures. NMR spectroscopic studies showed predominantly the formation of methyl branches in the obtained PE. Catalysts under study gave linear low‐density PEs with good crystallinities at temperatures of reaction between 50 °C and 70 °C at moderate pressures (12.3 atm). A propylene–ethylene copolymer produced by the metallocene catalyst had the same concentration of branches as the PE synthesized from methallyl nickel/B(C₆F₅)₃. Comparing the two polyolefins with the same degree of branching, it was observed that the polymer obtained with the nickel catalyst proved to be twice more crystalline and had greater T_m. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 452–458     

Long‐chain branched random polyethylene via acyclic diene metathesis (ADMET) copolymerization

Five types of ethylene/α‐alkene model copolymers containing 21‐carbon alkyl branches have been synthesized via acyclic diene metathesis (ADMET) copolymerization. The overall branch content is controlled by varying the feedstock ratio of the long‐chain branched symmetrical α, ω‐diene and 1,9‐decadiene. Well‐defined melting transitions are present at low branch incorporation, followed by the broadening of the endotherms as the branch contents increase. However, instead of making the material amorphous, further increasing of the branch contents leads to the retrieval of the semi‐crystalline material creating a new crystalline domain, branches that co‐crystallize. Detailed IR spectra analyses suggest a crystal morphology transformation from orthorhombic to hexagonal phase as the branch content increases in these polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018     

Structural analysis of polyethene prepared with rac‐dimethylsilylbis(indenyl)zirconium dichloride/methylaluminoxane in a high‐temperature,continuously stirred tank reactor

A study of ethene solution polymerization with the rac‐dimethylsilylbis(indenyl)‐zirconium dichloride/methylaluminoxane catalyst system in a high‐temperature (140 °C), continuously stirred tank reactor system was carried out. ¹³C NMR, gel permeation chromatography, Fourier transform infrared, and rheological measurements were used for polymer analyses. Polyethylenes with low molecular weights (weight‐average molecular weight ≈ 35–55 kg/mol) and small amounts of methyl, ethyl, and long‐chain branching were produced. ¹³C NMR measurements showed that the long‐chain and methyl branches increased and that the ethyl branch contents decreased with decreasing monomer concentrations. At high monomer concentrations, the chain transfer to the coordinated monomer was concluded to be the predominant chain termination mechanism, whereas the chain transfer to aluminum was dominant at low monomer concentrations, which was evidenced by the fact that the selectivity of end groups was reduced to about 50%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3292–3301, 2002     

Synthesis of new amphiphilic diblock copolymers containing poly(ethylene oxide) and poly(α‐olefin)

This article discusses an effective route to prepare amphiphilic diblock copolymers containing a poly(ethylene oxide) block and a polyolefin block that includes semicrystalline thermoplastics, such as polyethylene and syndiotactic polystyrene (s‐PS), and elastomers, such as poly(ethylene‐co‐1‐octene) and poly(ethylene‐co‐styrene) random copolymers. The broad choice of polyolefin blocks provides the amphiphilic copolymers with a wide range of thermal properties from high melting temperature ～270 °C to low glass‐transition temperature ～?60 °C. The chemistry involves two reaction steps, including the preparation of a borane group‐terminated polyolefin by the combination of a metallocene catalyst and a borane chain‐transfer agent as well as the interconversion of a borane terminal group to an anionic (? O^?K⁺) terminal group for the subsequent ring‐opening polymerization of ethylene oxide. The overall reaction process resembles a transformation from the metallocene polymerization of α‐olefins to the ring‐opening polymerization of ethylene oxide. The well‐defined reaction mechanisms in both steps provide the diblock copolymer with controlled molecular structure in terms of composition, molecular weight, moderate molecular weight distribution (M_w/M_n < 2.5), and absence of homopolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3416–3425, 2002