DNA Separation by Microchip Electrophoresis Using Copolymers of Poly(vinylpyrrolidone) and Hydroxyethylcellulose

Copolymers of poly(vinylpyrrolidone) (PVP) and hydroxyethylcellulose (HEC) were synthesized, with PVP to HEC molar ratios of 3:1, 2:1 and 1:1. The copolymers were tested as separation media in DNA fragment separation analysis by microchip electrophoresis (MCE). Separation efficiency over 3.8×10⁵ for 118 bp has been reached by using the bare channels without the additional polymer coating step. Under optimized separation conditions for longer read length DNA sequencing, the separation ability of the copolymers decreased with decreasing (PVP‐co‐HEC) molar ratio from 3:1 to 2:1 and 1:1. In comparison with (PVP‐co‐HEC) 1:1, the copolymer with (PVP‐co‐HEC) 3:1 ratio showed high separation efficiency. By using a 20 g·L^?1 copolymer with (PVP‐co‐HEC) 3:1 ratio, ΦΧ174‐HaeIII digest DNA marker was successfully separated within 3 min.     

Template tailoring: Accurate determination of heterozygous alleles using peptide nucleic acid and dideoxyNTP

Measurement of the length of DNA fragments plays a pivotal role in genetic mapping, disease diagnostics, human identification and forensic applications. PCR followed by electrophoresis is used for DNA length measurement of STRs, a process that requires labeled primers and allelic ladders as standards to avoid machine error. Sequencing‐based approaches can be used for STR analysis to eliminate the requirement of labeled primers and allelic ladder. However, the limiting factor with this approach is unsynchronized polymerization in heterozygous sample analysis, in which alleles with different lengths can lead to imbalanced heterozygote peak height ratios. We have developed a rapid DNA length measurement method using peptide nucleic acid and dideoxy dNTPs to “tailor” DNA templates for accurate sequencing to overcome this hurdle. We also devised an accelerated “dyad” pyrosequencing strategy, such that the combined approach can be used as a faster, more accurate alternative to de novo sequencing. Dyad sequencing interrogates two bases at a time by allowing the polymerase to incorporate two nucleotides to DNA template, cutting the analysis time in half. In addition, for the first time, we show the effect of peptide nucleic acid as a blocking probe to stop polymerization, which is essential to analyze the heterozygous samples by sequencing. This approach provides a new platform for rapid and cost‐effective DNA length measurement for STRs and resequencing of small DNA fragments.     

Thermal stability of DNA in DNA-induced DOTAP liposome aggregates

The influence on the melting of calf thymus DNA induced by cationic liposomes, commonly used in gene therapy, was studied by means of ultraviolet spectrophotometry and differential scanning calorimetry. Both the two methods reveal that DNA in DNA-induced liposome complexes undergoes a denaturation process at a much higher temperature than free DNA does. The extent of protection strongly depends on the charge ratio R(+/−) of liposome-DNA complexes. In the case of dioleoyl trimethyl ammonium propane (DOTAP) liposomes, the maximum of the stabilization occurs at R(+/−)=0.7, where the DNA is still native up to temperatures higher than 100°C. This protection against denaturation up to higher temperatures might be of importance for bio-technological applications, such as biomolecular separation, antigene sequencing and for drug design purpose.     

Identification of methylated regions with peak search based on Poisson model from massively parallel methylated DNA immunoprecipitation-sequencing data

DNA methylation is one of the most important epigenetic modification types, which plays a critical role in gene expression. High efficient surveying of whole genome DNA methylation has been aims of many researchers for long. Recently, the rapidly developed massively parallel DNA‐sequencing technologies open the floodgates to vast volumes of sequence data, enabling a paradigm shift in profiling the whole genome methylation. Here, we describe a strategy, combining methylated DNA immunoprecipitation sequencing with peak search to identify methylated regions on a whole‐genome scale. Massively parallel methylated DNA immunoprecipitation sequencing combined with methylation DNA immunoprecipitation was adopted to obtain methylated DNA sequence data from human leukemia cell line K562, and the methylated regions were identified by peak search based on Poison model. From our result, 140 958 non‐overlapping methylated regions have been identified in the whole genome. Also, the credibility of result has been proved by its strong correlation with bisulfite‐sequencing data (Pearson R²=0.92). It suggests that this method provides a reliable and high‐throughput strategy for whole genome methylation identification.     

3′-Amino-Modified Nucleotides Useful as Potent Chain Terminators for current DNA sequencing methods

We describe the synthesis of modified nucleoside triphosphates of the four DNA bases containing a 3′-amino group which were prepared from the corresponding 3′-azido derivatives. Introduction of the triphosphate and subsequent reduction of the N₃ to the NH₂ group led directly to the target molecules 6a–d . Furthermore, 3′-amino-2′,3′-dideoxynucleoside 5′-triphosphates proved to be potent inhibitors of the enzymatic synthesis of DNA catalyzed by the standard sequencing enzymes T7 DNA polymerase, sequenase version 2.0, Thermus aquaticus DNA polymerase, and Thermus thermophilus DNA polymerase. Both radioactive and fluorescent sequencing methods were applied successfully to the 3′-amino-modified terminators. Investigations in view of using these chain terminators according to Sanger's sequencing method for fluorescence labeling were done.     

Miniaturized pyrosequencer for DNA analysis with capillaries to deliver deoxynucleotides.

As the human genome project proceeds, various types of DNA analysis tools are required for life sciences and medical sciences including DNA diagnostics. For example, a small DNA sequencer for sequencing a short DNA is required for bed-side DNA testing as well as DNA analysis in a small laboratory. Here, a new handy DNA sequencing system (pyrosequencer) based on the detection of inorganic pyrophosphate (PPi) released by polymerase incorporation is demonstrated. The system uses the bioluminescence detection system. The key point for the miniaturized DNA sequencer is to make a deoxynucleotide triphosphate (dNTP) delivery system small and inexpensive. It has been realized by using narrow capillaries to connect a reaction chamber and four dNTP reservoirs. Each dNTP is introduced into the reaction chamber by applying a pressure to the reservoir. Compared with other microdispensers, it is much cheaper and easier. By optimizing the conditions, an excellent sequencing ability is achieved while it is a simple and inexpensive system. In most cases, more than 40 bases can be successfully sequenced. A homopolymeric region, which can not be easily sequenced by a conventional gel-based DNA sequencer, is readily sequenced with this system. The new system is successfully applied to sequence a GC rich region or a region close to a priming region where misreading frequently occurs. A rapid analysis for a short DNA was easily achieved with this small instrument.     

Isolation of Xis Gen Fragment of λ Phage from Agarose Gel Using Magnetic Particles for Subsequent Enzymatic DNA Sequencing

Gel electrophoresis is one of the most important methods used in biochemistry and molecular biology. The recovery of analytes from the gel required for subsequent analysis including amplification by polymerase chain reaction (PCR) or DNA sequencing is an issue due to the gel contamination. Among the other methods used for sample recovery, the application of nanomaterials is also being investigated. In this study, the applicability of magnetic particles (1 μm) for isolation of DNA fragment from agarose gel with subsequent DNA sequencing was investigated. Electrochemical analysis and DNA sequencing was used to investigate the recovery yield. The influence of dilution of the gel prior to the purification was investigated and the linear dependence with regression coefficient R ² = 0.9972 was obtained using square wave voltammetry. Moreover, bioinformatic analysis was used for comparison of obtained sequences, and simple and easy identification of non-systematic errors caused by both fluorescence labeling reaction and electrophoretic separation. It was found that magnetic nanoparticles based isolation markedly lowered the errors occurring during sequencing of the isolated DNA fragment from 7 to 1 %.     

Design and synthesis of a photocleavable fluorescent nucleotide 3'-O-allyl-dGTP-PC-Bodipy-FL-510 as a reversible terminator for DNA sequencing by synthesis

DNA sequencing by synthesis (SBS) using reversible fluorescent nucleotide terminators is potentially an efficient approach to address the limitations of current DNA sequencing techniques. Here, we report the design and synthesis of a 3'-O-allyl photocleavable fluorescent nucleotide analogue, 3'-O-allyl-dGTP-PC-Bodipy-FL-510, as a reversible terminator for SBS. The nucleotide is efficiently incorporated by DNA polymerase into a growing DNA strand to terminate the polymerase reaction. After that, the fluorophore is photocleaved quantitatively by irradiation at 355 nm, and the allyl group is rapidly and efficiently removed by using a Pd-catalyzed reaction under DNA-compatible conditions to regenerate a free 3'-OH group to reinitiate the polymerase reaction. Two cycles of such steps were successfully demonstrated to sequence a homopolymeric region of a DNA template, facilitating the development of SBS as a viable approach for high-throughput DNA sequencing.     

Poly-N-hydroxyethylacrylamide (polyDuramide): a novel,hydrophilic, self-coating polymer matrix for DNA sequencing by capillary electrophoresis

A replaceable polymer matrix, based on the novel monomer N-hydroxyethylacrylamide (HEA), has been synthesized for application in DNA separation by microchannel electrophoresis. The monomer was found by micellar electrokinetic chromatography analysis of monomer partitioning between water and 1-octanol to be more hydrophilic than acrylamide and N,N-dimethylacrylamide. Polymers were synthesized by free radical polymerization in aqueous solution. The weight-average molar mass of purified polymer was characterized by tandem gel permeation chromatography-multiangle laser light scattering. The steady-shear rheological behavior of the novel DNA sequencing matrix was also characterized, and it was found that the viscosity of the novel matrix decreases by more than 2 orders of magnitude as the shear rate is increased from 0.1 to 1000 s(-1). Moreover, in the shear-thinning region, the rate of change of matrix viscosity with shear rate increases with increasing polymer concentration. Poly-N-hydroxyethylacrylamide (PHEA) exhibits good capillary-coating ability, via adsorption from aqueous solution, efficiently suppressing electroosmotic flow (EOF) in a manner comparable to that of poly-N,N-dimethylacrylamide. Under DNA sequencing conditions, adsorptive PHEA coatings proved to be stable and to maintain negligible EOF for over 600 h of electrophoresis. Resolution of DNA sequencing fragments, particularly fragments > 500 bases, in PHEA matrices generally improves with increasing polymer concentration and decreasing electric field strength. When PHEA is used both as a separation matrix and as a dynamic coating in bare silica capillaries, the matrix can resolve over 620 bases of contiguous DNA sequence within 3 h. These results demonstrate the good potential of PHEA matrices for high-throughput DNA analysis by microchannel electrophoresis.     

Quantitative Determination of Cyclobutane Thymine Dimers in DNA by Stable Isotope-Dilution Mass Spectrometry

In order to understand the role of UV-induced DNA lesions in biological processes such as mutagenesis and carcinogenesis, it is essential to detect and quantify DNA damage in cells. In this paper we present a novel and both highly selective and sensitive assay using capillary gas chromatography (GC) combined with mass spectrometry (MS) for the detection and accurate quantitation of a major product of UV-induced DNA damage (cissyn cyclobutadithymine). Quantitation of the cyclobutane thymine dimer was achieved by the use of an internal standard in the form of a stable ²H-labeled analogue. Both isotopically labeled and nonlabeled dimers were prepared directly from their corresponding monomers. Each was identified as their trimethylsilyl ether derivative by GC-MS. Calibration plots were obtained for known quantities of both nonlabeled analyte and internal standard. Quantitation of cis-syn cyclobutadithymine was demonstrated in DNA exposed to UVC radiation over a dose range of 0 to 3500 J m^?2. Under the conditions used, the limit of detection was found to be 20–50 fmol on column (equivalent to 0.02–0.05 nmol dimer per mg DNA). The results of the present study indicate that capillary GC-MS is an ideally suited technique for selective and sensitive quantification of cis-syn cyclobutadithymine in DNA and hence UV-induced DNA damage.     

Selective,pH-Dependent Colorimetric and Fluorimetric Detection of Quadruplex DNA with 4-Dimethylamino(phenyl)-Substituted Berberine Derivatives

The 9- and 12-dimethylaminophenyl-substituted berberine derivatives 3 a and 3 b were readily synthesized by Suzuki-Miyaura reactions and shown to be useful fluorescent probes for the optical detection of quadruplex DNA (G4-DNA). Their association with the nucleic acids was investigated by spectrometric titrations, CD and LD spectroscopy, and with DNA-melting analysis. Both ligands bind to duplex DNA by intercalation and to G4-DNA by terminal π stacking. At neutral conditions, they bind with higher affinity (K_b=10⁵−10⁶ M⁻¹) to representative quadruplex forming oligonucleotides 22AG , c-myc , c-kit , and a2 , than to duplex calf thymus (ct) DNA (K_b=5-7×10⁴ M⁻¹). At pH 5, however, the affinity of 3 a towards G4-DNA 22AG is higher (K_b=1.2×10⁶ M⁻¹), whereas the binding constant towards ct DNA is lower (K_b=3.9×10³ M⁻¹) than under neutral conditions. Notably, the association of the ligand with DNA results in characteristic changes of the absorption and emission properties under specific conditions, which may be used for optical DNA detection. Other than the parent berberine, the ligands do not show a noticeable increase of their very low intrinsic emission intensity upon association with DNA at neutral conditions. In contrast, a fluorescence light-up effect was observed upon association to duplex (Φ_fl=0.01) and quadruplex DNA (Φ_fl=0.04) at pH 5. This fluorimetric response to G4-DNA association in combination with the distinct, red-shifted absorption under these conditions provides a simple and conclusive optical detection of G4-DNA at lower pH.     

Mobility, diffusion and dispersion of single-stranded DNA in sequencing gels

Electrophoresis of single-stranded DNA in denaturing polyacrylamide gels is presently a standard procedure for the sequencing of DNA fragments. A thorough understanding of the factors that determine the resolution of DNA fractionated in polyacrylamide gels is necessary to optimize the performance of DNA sequencers. Significant research on the mobility of double-stranded (ds)DNA molecules in agarose and polyacrylamide gels has been performed, and the phenomenon of band broadening of single-stranded (ss)DNA fragments in DNA sequencing gels has received attention only recently. In this paper, we present a detailed study of mobility, diffusion and dispersion of ssDNA in sequencing gels as a function of molecular size, gel concentration and electric field strength. DNA mobility is shown to be essentially independent of electric field in the range of 0-60 V/cm. The band broadening is greatly enhanced in the presence of an electric field and the dispersion coefficient (DE) can be an order of magnitude higher than the field-free diffusion coefficient. The measured migration parameters approximately follow the predictions of the biased reptation including fluctuations (BRF) theory. However, deviations due to nonidealities of the separation conditions are observed. The measured migration parameters can be used to optimize the performance of separation systems.     

基于石墨烯纳米材料的DNA测序研究进展

设计和研发快速、准确、价廉、高通量的DNA测序方法,对于预防早期疾病和了解相关疾病机理具有非常重要的意义。新型纳米材料石墨烯由于具有独特的结构和性质,在化学和生物科学等领域发挥着重要的作用。该文介绍了DNA测序的研究现状以及应用石墨烯纳米材料的优势,重点阐述了DNA链通过石墨烯纳米孔、石墨烯纳米间隙、石墨烯纳米带时产生不同的电流信号识别碱基序列的原理,同时介绍了DNA链与石墨烯的相互作用对DNA测序的影响,并对DNA测序的研究方向进行了展望。该文为基于石墨烯纳米材料的DNA测序提供了作用原理、理论研究以及检测方法等参考。     

Fast DNA sequencing up to 1,000 bases by capillary electrophoresis using poly(N,N-dimethylacrylamide) as a separation medium

Poly(N,N-dimethylacrylamide) (PDMA) with a molecular mass of 5.2 x 10(6) g/mol has been synthesized and used in DNA sequencing analysis by capillary electrophoresis (CE). A systematic investigation is presented on the effects of different separation conditions, such as injection amount, capillary inner diameter, polymer concentration, effective separation length, electric field and temperature, on the resolution. DNA sequencing up to 800 bases with a resolution (R) limit of 0.5 (and 1,000 bases with a resolution limit of 0.3) and a migration time of 96 min was achieved by using 2.5% w/v polymer, 150 V/cm separation electric field, and 60 cm effective separation length at room temperature on a DNA sample prepared with FAM-labeled--21M13 forward primer on pGEM3Zf(+) and terminated with ddCTP. Ultrafast and fast DNA sequencing up to 420 and 590 bases (R > or = 0.5) were also achieved by using 3% w/v polymer and 40 cm effective separation length with a separation electric field of 525 and 300 V/cm, and a migration time of 12.5 and 31.5 min, respectively. PDMA has low viscosity, long shelf life and dynamic coating ability to the glass surface. The unique properties of PDMA make it a very good candidate as a separation medium for large-scale DNA sequencing by capillary array electrophoresis (CAE).     

Optimization of sequencing conditions using near-infrared lifetime identification methods in capillary gel electrophoresis

We have investigated the sample preparation and electrophoresis conditions necessary to prepare DNA sequencing samples appropriate for use with near-infrared (IR) fluorescent labels with dye identification accomplished via lifetime techniques. It was found that several sample preparation protocols required attention to maximize the fluorescence yields of the labeling dyes, such as thermal cycling conditions, choice of counter ion used for the ethanol precipitation step and also, dye-primer versus dye-terminator chemistries. In addition, several different sieving matrices were investigated for their effects on both the fluorescence properties of the labeling dyes and electrophoretic resolution. Extended times used for the high temperature denaturing of duplexed DNA fragments during cycle sequencing produced cleavage products, in which the covalently attached dye to the sequencing primer was released through attack by dithiothreitol (DTT). Even under optimized thermal cycling conditions, free dye was generated that masked readable data from the sequencing traces. Ethanol precipitation was necessary to remove this free dye with the proper choice of counter ion (sodium). The results using different sieving matrices indicated that linear polyacrylamides (LPAs) were appropriate for any fluorescence measurement, since they could readily be replaced between runs minimizing deleterious memory effects associated with cross-linked polyacrylamide gels. After investigation of several different sieving LPAs, the commercially available POP6 was found to be particularly attractive, since it produced good electrophoretic resolution, single exponential behavior for the near-IR dye series investigated herein, and also, discernible lifetime differences within the dye set. Finally, dye-terminator chemistry was also found to minimize bleeding in the gel matrix produced by large amounts of unextended dye-primer within the gel lane.     

AN EPR STUDY OF π-CATION RADICALS IN DINUCLEOSIDE PHOSPHATES AND DNA PRODUCED BY PHOTOIONIZATION

In this work we have produced the π-cation radicals of a number of nucleotides, dinucleoside phosphates, and DNA in aqueous glasses (8M NaCIO₄) by photoionization and investigated these species by EPR spectroscopy. Results found for nucleotides and dinucleoside phosphates containing one type of DNA base, e.g. TpT, GpG, or dApdA, were used in the analysis of spectra found for mixed dinucleoside phosphates, e.g. TpdG. For TpdG and TpdA in neutral glasses photoionization takes place from the purine base and no transfer of charge to the pyrimidine base is found. In basic conditions both the adenine and thymine π-cations are observed in TpdA. In both neutral and basic conditions the results found for mixed dinucleoside phosphates containing guanine show that the guanine cation is formed preferentially by photolysis. This result was found to extend to DNA. Photolysis of DNA in 8M NaC1O₄ produced principally the guanine cation. Computer simulations using parameters determined by other workers from a study of γ-irradiated oriented DNA closely match the spectrum found in this work attributed to the guanine cation in dinucleoside phosphates and DNA. This work thus confirms the presence of the guanine cation in γ-irradiated DNA.