One-pot synthesis of 2-amino-3,4-dicyanopyridines from ketoximes and tetracyanoethylene via Cu(I)-catalyzed cyclization

A novel approach to 2-amino-3,4-dicyanopyridines has been discovered from Cu(I)-catalyzed cyclizations of simple and easily available ketoximes and tetracyanoethylene (TCNE). The complexed radical mechanism involves cleavage of several OH/NO/CH bonds, and new CC/CN bonds formation. A wide variety of substrates with different functional groups could be smoothly converted into the corresponding products in moderate yields.     

Mn(III)-mediated radical cascade reaction of boronic acids with isocyanides: Synthesis of diimide derivatives

A manganese(Ⅲ)-promoted oxidative radical cascade reaction of easily accessible arylboronic acids with isocyanides to construct diimide derivatives was studied. This protocol provides a new way to synthesis of acetyl diimide derivatives. New C-C, C-N and C=O bonds were formed in one step.     

Rhodium-catalyzed CH activation/cyclization of enaminones with sulfoxonium ylides toward polysubstituted naphthalenes

A rhodium-catalyzed ortho-CH functionalization and annulation between enaminones and sulfoxonium ylides was developed, affording a series of multi-substituted naphthalenes in good to moderate yields with excellent functional group compatibility. The procedure featured with enaminone acting as both a directing and cyclization bifunctional group, and the application of sulfoxonium ylide in CH functionalization.     

Ultrasound assisted one-pot synthesis of 1,2-diaryl azaindoles via Pd/C-Cu catalysis: Identification of potential cytotoxic agents

Ultrasound assisted one-pot and direct access to 1,2-diaryl substituted azaindole derivatives has been achieved via the sequential N-arylation followed by coupling-cyclization under Pd/C-Cu catalysis. The methodology involved initial CN bond forming reaction (step 1) between an appropriate o-bromo substituted amino pyridine and iodoarene followed by CC and CN bond formation (step 2) between the resulting N-aryl substituted intermediate and a terminal alkyne in the same pot. A variety of azaindoles was prepared by using this method. These compounds were assessed for their cytotoxic properties against two different metastatic breast cancer cell lines. Compounds 4i, 4k and 4o showed promising growth inhibition of these cell lines and SIRT1 inhibition in vitro.     

Reprint of: Acid-mediated four-component tandem cyclization: Access to multifused 1,3-benzoxazine frameworks

An acid-mediated multicomponent reaction has been developed for the direct synthesis of multifused 1,3-benzoxazine derivatives from simple and readily available arylglyoxal monohydrates and 2-aminobenzyl alcohols under mild conditions. This novel protocol is proposed to proceed through intramolecular poly-heterocyclizations, thus leading to the formation of three new rings and six new chemical bonds, including four CN and two CO bonds.     

Non-directed highly para-selective CH functionalization of TIPS-protected phenols promoted by a carboxylic acid ligand

Palladium-catalyzed non-directed CH functionalization provides an efficient approach for direct functionalization of arenes, but it usually suffers from poor site selectivity, limiting its wide application. Herein, it is reported for the first time that the carboxylic acid ligand of 3,5-dimethyladamantane-1-carboxylic acid (1-DMAdCO₂H) can affect the site selectivity during the CH activation step in palladium-catalyzed non-directed CH functionalization, leading to highly para-selective CH olefination of TIPS-protected phenols. This transformation displayed good generality in realizing various other para-selective CH functionalization reactions such as halogenation, and allylation reactions. A wide variety of phenol derivatives including bioactive molecules of triclosan, thymol, and propofol, were compatible substrates, leading to the corresponding para-selective products in moderate to good yields. A preliminary mechanism study revealed that the spatial repulsion factor between carboxylic acid ligand and bulky protecting group resulted in the selective CH activation at the less sterically hindered para-position. This new model non-directed para-selective CH functionalization can provide a straightforward route for remote site-selective CH activations.     

Facile one-pot synthesis of novel highly functionalized dihydro-1H-pyrrole derivatives catalyzed by molecular iodine

An efficient, environmentally benign and molecular iodine promoted protocol was described for cascade synthesis of two kinds of novel dihydro-1H-pyrrole derivatives, 5 and 7. Compounds 5 were prepared via four-component reaction between diethyl acetylenedicarboxylate (DEAD), aromatic amines and phenylglyoxal monohydrate catalyzed by 10 mol% of iodine in ethanol at room temperature. In addition, using same reaction conditions, a three-component reaction between (E)-N-methyl-1-(methylthio)-2-nitroethenamine (NMSM), aromatic amines and arylglyoxal monohydrate was performed to access product 7. These transformations apparently proceed through an imine intermediate followed by iodine induced Mannich reaction and subsequent intra-molecular cyclization sequences. The protocol involves the formation of CN, CC and OH bonds leading to the preparation of a hexa substituted five membered ring with two stereo centres. The syntheses avoid the use of traditional column chromatography and recrystallization purification methods and, hence, follow the group-assisted purification (GAP) chemistry process.     

I2/TBHP mediated multiple CH bonds functionalization of azaarenes with methylarenes to synthesize iodoisoquinolinones via iodination/N-benzylation/amidation sequence

An oxidative multi-functionalization of azaarenes with benzylic CH bonds of methylarenes via iodination/N-benzylation/amidation cascade, to produce N-benzyl-4-iodoisoquinolin-1(2H)-ones and N-benzyl-3-iodoquinolin-2(1H)-ones is developed. The molecular iodine plays a triple role in activating benzylic sp³ CH bond of methylbenzenes, accelerating the oxidation process and serving as iodination reagent. This reaction utilizes cheap and readily available azaarenes and methylarenes as starting materials and proceeds under metal-free conditions to construct C-I, CN and CO bonds consecutively and afford iodo(iso)quinolinones efficiently.     

How long a C–C bond can be? An example of extraordinary long C–C single bond in 1,2-diarylamino-o-carborane

The longest C-C single bond of 1.990(4) Å known thus far is observed in the single crystal X-ray structure of 1,2-(NHMes)₂-o-carborane (Mes = 2,4,6-trimethylphenyl), which is readily synthesized via a one-pot process.     

Potentiometric and antimicrobial studies on the asymmetric Schiff bases and their binuclear Ni(II) and Fe(III) complexes; synthesis and characterization of the complexes

The protonation constants of two nitro-Schiff bases SB¹, SB² and three asymmetric tetradentate diimines H₂L¹, H₂L² and H₂L³ and the stability constants of their ML type binuclear Ni(II) and Fe(III) complexes have been determined potentiometrically. The asymmetric diimines are (2OH) RCHNC₆H₄CHNR′ (2OH) type compounds [where R = R′ = phenyl for H₂L¹; R = naphthyl, R′ = phenyl for H₂L² and R = R′ = naphthyl for H₂L³]. The effect of tautomeric forms on the acid-base properties of the diimines has been investigated and discussed. In addition, dimeric and binuclear Ni(II) and Fe(III) complexes of the diimines have been synthesized and characterized by physical and spectroscopic techniques. Also, in vitro antimicrobial activities of the diimines and the complexes have been evaluated against three bacteria: Micrococcus luteus (NRLL B-4375), Bacillus cereus (RSKK 863), Escherichia coli (ATCC 11230) and the fungus: Candida albicans (ATCC 10239).     

Palladium-catalyzed direct ortho CX bond construction via CH activation of azobenzenes: Synthesis of (E)-1,2-b(2,6-dibromo(chloro)-phenyl)diazene

A palladium-catalyzed direct CX bond formation of azobenzenes with 1,3-dibromo-5,5-dimethylhydantoin or trichloro isocyanuric acid via CH activation has been developed. The reaction could proceed smoothly under an air atmosphere at 110 °C in the presence of Pd(Ph₃P)₄ in DCE and 13 examples of products were obtained.     

Effect of oxygen-containing functional groups on the wettability of coal through DFT and MD simulation

To investigate the wettability of different oxygen-containing functional group (OFG) surfaces, graphite substrates were used as a model for coal adsorbents. The substrates were modified with COOH, OH, CO, and OCH₃. The adsorption-diffusion behavior of H₂O molecules/water droplets on different OFG surfaces was investigated using molecular dynamics (MD) simulations with frontier orbital energy difference as a metric for different surface wettability degrees in quantum chemical analysis. The results indicated that the frontier orbital energy difference of the H₂O molecule was 3.480, 3.491, 3.631, and 3.680 eV for PhCOOH, PhOH, PhCO, and PhOCH₃, respectively. In addition, the equilibrium contact angle, interaction energy, and number of hydrogen bonds after the adsorption equilibrium of water droplets for COOH, OH, CO, and OCH₃ surfaces were 22.34°, ?5.03 kcal/mol, and 652; –23.72°, ?4.19 kcal/mol, and 450; 68.01°, ?0.79 kcal/ mol, and 61; 90.51°, ?0.50 kcal/mol, and 28, respectively. The smaller the energy difference between the frontier orbitals of the H₂O molecule and the OFG, the smaller the equilibrium contact angle between the water droplet and the OFG surface, the more hydrogen bonds were formed, and the larger the absolute value of the interaction energy, the better the wettability of the surface of the OFG. The order of wettability of the different OFG surfaces was COOH > OH > CO > OCH₃, which is consistent with the radial distribution function and the analysis results for the extended area, etc. The results of density functional theory (DFT) calculations and MD simulations exhibited identical patterns, indicating the reasonableness of the simulations. This study may serve as a reference for the suppression of hydrophilicity in low-order coal and the enhancement of the flotation effect.     

Synthesis of 2,3,5,6-tetrasubstituted pyridines via selective three-component reactions of aldehyde and two different enaminones

The three-component synthesis of structurally unsymmetrical pyridines with polysubstituted structure has been realized via the catalytic system consisting of CuI and KHSO₄. The employment of two different enaminones is the main factor allowing the successful [3+2+1] construction of the pyridine ring based on the formation of two CC and one CN bonds.     

Propargyl α-aryl-α-diazoacetates as robust reagents for the effective CH bond functionalization of 1,3-diketones via scandium catalysis

Propargyl α-aryl-α-diazoacetate a new class of reagent is developed for the effective CH bond functionalization of 1,3-diketones at room temperature. The combination of scandium triflate and propargyl α-aryl-α-diazoacetate proved to be efficient catalyst-reagent system for the controlled CH bond functionalization to afford 1,3-dicarbonyl alkylation. The protocol uses inexpensive Sc(OTf)₃ (5 mol%) and the reaction did not require the use of expensive catalysts or ligands and worked efficiently at room temperature. The practicality of the protocol has been demonstrated by the gram scale synthesis.     

Crystal structure,conformation and vibrational characteristics of diethyl 4,4′-disulfanediylbis(6-methyl-2-phenylpyrimidine-5-carboxylate) – A new pharmaceutical cure

The crystal and molecular structures of diethyl 4,4′-disulfanediylbis(6-methyl-2-phenylpyrimidine-5-carboxylate) have been determined by X-ray diffraction and quantum chemical DFT analysis. The title compound crystallizes in orthorhombic Pbca (D_2h¹⁵) space group, with one molecule in the asymmetric unit. The molecular structure of the studied compound has been determined using the DFT B3LYP/6-311G(2d,2p) approach and compared to that derived from X-ray studies. The IR and Raman spectra have been measured and their wavenumbers have been compared to those calculated for the optimized geometry of the studied compound. The characteristic vibrations of the 4,4′-dithiobispyrimidine N₂C₄SSC₄N₂ skeleton have been identified and on this basis the correlation between the disulfide bridge conformation and vibrational data have been discussed.     

Copper-catalyzed oxidative CH bond functionalization of N-allylbenzamide for CN and CC bond formation

CH bond functionalization for CN and CC bond formations via cross-dehydrogenative coupling (CDC) of N-allylbenzamides with indole as amine source has been developed under a copper-catalyzed condition. To the best of our knowledge, these are the first examples in which different classes of N-containing compounds were directly prepared from the readily available N-allylbenzamides using an inexpensive catalyst-oxidant (CuSO₄/TBHP) system. Further, it was applied for the synthesis of α-substituted N-allylbenzamides by using Grignard reagent as nucleophiles.     

Reaction pathway change on plasmonic Au nanoparticles studied by surface-enhanced Raman spectroscopy

Gold nanoparticles (Au NPs) are nanoscale sources of light and electrons, which are highly relevant for their extensive applications in the field of photocatalysis. Although a number of research works have been carried out on chemical reactions accelerated by the energetic hot electrons/holes, the possibility of reaction pathway change on the plasmonic Au surfaces has not been reported so far. In this proof-of-concept study, we find that Au NPs change the reaction pathway in photooxidation of alkyne under visible light irradiation. This reaction produces benzil (COCO) without the presence of Au NPs. In contrast, as indicated by surface-enhanced Raman spectroscopic (SERS) results, the CC triple bonds (CC) adsorbed on Au NPs are converted into carboxyl (COOH) and acyl chloride (COCl) groups. The plasmonic Au NPs not only provide energetic charge carriers but also activate the reactant molecules as conventional heterogeneous catalysts. This study discloses the second role of plasmonic NPs in photocatalysis and bridges the gap between plasmon-driven and conventional heterogeneous catalysis.     

Synthesis of triphenylene derivatives by Pd-catalyzed Suzuki coupling/intramolecular CH activation between arylboronic acids and dibromobiphenyls

An efficient and regioselective synthesis of functionalized triphenylenes via palladium-catalyzed Suzuki-Miyaura coupling and subsequent intramolecular CH activation between arylboronic acids and dibromobiphenyls was developed. This methodology showed excellent atomic economy and regiospecificity as well as synthetic feasibility of unsymmetrical triphenylenes.     

Phytochemical screening and metabolomic approach based on Fourier transform infrared (FTIR): Identification of α-amylase inhibitor metabolites in Vernonia amygdalina leaves

ContextVernonia amygdalina has been reported as a potential antidiabetic agent. One of the mechanisms in diabetes mellitus treatment is the inhibition of the α-amylase enzyme’s action.ObjectiveThis study is aimed to identify the presence of secondary metabolites in Vernonia amygdalina leaf extract, which has the potential as α-amylase inhibitors through phytochemical screening combined with metabolomic analysis.Materials and methodsMethanol extract from Vernonia amygdalina leaf was partitioned into n-hexane, dichloromethane (DCM), and ethyl acetate. From this process, methanol, hexane, DCM, and ethyl acetate extracts were obtained. These extracts were then being tested for phytochemical screening, α-amylase inhibition, and FTIR. Then FTIR data were used for metabolomic analysis (PCA and PLS).ResultsThe results of the α-amylase inhibition test showed that the ethyl acetate extract had the smallest IC50 average value, which was 3.00 μg/mL. Based on the phytochemical screening test results, the extract showed positive for the presence of compounds such as flavonoids, phenols, tannins, alkaloids, and saponins. From the PCA analysis (Bi-plot), the wavenumbers that were influential in the ethyl acetate extract were 1436 to 1681 and 3341 to 3348 cm^?1. In theory, functional groups such as CH, CC, CO, NH, and OH appeared on the absorption. From the PLS analysis, these wavenumbers affected the activity.ConclusionThe most potential extract as an α-amylase inhibitor was the ethyl acetate extract. Based on phytochemical screening tests and metabolomic analysis, it was proven that this extract contained compounds as hypoglycemic agents.