Dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) using siloxane-based surfactant in supercritical carbon dioxide and in compressed liquid dimethyl ether

The free radical dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) has been carried out in supercritical carbon dioxide (scCO₂) and compressed liquid DME using several surfactants. The polymerization are performed in the presence of fluorine-based poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl acrylate) [poly(HDFDA)], poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate) [poly(HDFDMA)], or poly(HDFDMA-co-MMA) and siloxane-based PDMS-g-pyrrolidonecarboxylic acid (Monasil PCA™) or PDMS modified surfactants, SS-5050K™ and KF6017™ as polymerization surfactants. When scCO₂ was used as a polymerization medium, the PHEMA were heavily agglomerated. However, the spherical and relatively uniform poly(2-hydroxyethyl methacrylate) (PHEMA) particles could be produced even at 20 bar, with a narrow particle size distribution in compressed liquid DME. It was observed that fluorine-based surfactants were not a good surfactant as siloxane-based surfactants for the dispersion polymerization of HEMA. The average particle size of PHEMA was shown to be dependent on the type of the surfactant, the amount of the surfactant and initiator added to the system. The effect of two continuous phases, which are scCO₂ and compressed liquid DME, as a polymerization medium, the surfactant types and the concentration, initiator concentration, and monomer concentration on the morphology and size of the polymer particles was also investigated.     

Identification of additives in poly(vinylacetate) artist’s paints using PY-GC-MS

Commercial poly(vinyl acetate) (PVAc) paint formulations for artists include a number of compounds in addition to the PVAc polymer and pigments to improve the physical and chemical properties of the resulting product. Among the most common additives are surfactants, coalescing agents, defoamers, freeze–thaw agents and thickeners. These products significantly influence the behaviour of the dried film. Nevertheless, they are usually difficult to detect with conventional analytical methods given their low concentration. In order to identify these additives, present in the dried film as minor components, an analytical method based on in situ thermally assisted pyrolysis–silylation gas chromatography–mass spectrometry (GC-MS) using hexamethyldisilazane as a derivatisation reagent is proposed. This method improves the conventional GC-MS analysis performed by direct pyrolysis and enables the simultaneous identification of the PVAc binding medium and the additives included by the manufacturer in the commercial paint. Five different commercial PVAc paints have been analysed, namely, armour green, burnt umber, oriental red, raw umber and white from Flashe®. Internal plasticiser VeoVa consisting of C₁₀ fatty acids with highly branched chains has been recognised from the MS spectra. On the other hand, the differences found in the additive content of the studied paints, in particular the poly(ethylene glycol)-type surfactant, are in good agreement with their mechanical properties.

Plasma Deposition of Polymeric Thin Films on Organic Corrosion-Inhibiting Paint Pigments: A Novel Method to Achieve Slow Release

Slow release of corrosion-inhibitive paint pigments is a great challenge to the paint industry, because of the urgent need to replace chromate-containing pigments. Unfortunately, most effective corrosion inhibitors are too soluble for use in paints. In this paper, we present a novel method to modify selected water-soluble organic inhibitor particles to achieve the purpose of slow release. A plasma polymerization technique was used to deposit an ultrathin polymer film on the surface of the inhibitor particles. Infrared spectroscopy (FTIR), time-of-flight secondary ion mass spectroscopy (TOFSIMS), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX), transmission electron microscopy (TEM), and contact angle data confirmed the successful deposition of the polymer thin film on the inhibitor particles. Using immersion tests and electrochemical techniques, we have demonstrated that the encapsulated water-soluble inhibitor can slowly release into the environment to protect a metal as needed. This technique is a feasible and promising method to promote the replacement of chromate pigments in paints.     

Evaluation of the residual stability of polyurethane automotive coatings by DSC

Degradation of poly(ester-urethanes), poly(ether-urethanes) and poly(acrylic-urethanes), as a base for automotive paintings in interior applications, has been studied by DSC. The samples were clearcoat and black-pigmented paints, unstabilized and stabilized with HALS Tinuvin 292, UV absorber Tinuvin 1130 and antioxidant Hostanox O3, exposed to weathering in Xenotest and in Arizona desert. From the dependences of oxidation onset temperature on the heating rate, the kinetic parameters enabling to calculate the oxidation induction time for a chosen temperature have been obtained. From the values of oxidation induction time, the protection factors of the additives and the residual stability of the polymer after an ageing stress has been evaluated. It has been shown that the equivalence between the two methods of weathering depends on the polymer composition. A new criterion for the evaluation of synergism/antagonism of additives in the stabilizing mixture has been proposed.     

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

Complexation of hydrophobically modified polyelectrolytes with surfactants: anionic poly(maleic acid/octyl vinyl ether)/anionic sodium dodecyl sulfate

Interactions of surfactants with hydrophobically modified polyelectrolytes in aqueous solutions are important in several applications such as detergents, cosmetics, foods, and paints. Fundamental questions arise on the mechanisms of complexation of the polyelectrolyte and surfactant that control their behavior. In this work, the complexation was studied by examining interactions in aqueous solutions of a hydrophobically modified polymer, poly(maleic acid/octyl vinyl ether) (PMAOVE), with sodium dodecyl sulfate (SDS) by monitoring viscosity, pyrene solubility, light scattering, and analytical ultracentrifugation. When the anionic surfactant SDS was added to aqueous solutions of the similarly charged polymer PMAOVE, the surfactant was incorporated into the hydrophobic nanodomains of PMAOVE even far below the cmc of the surfactant. On the basis of viscosity, pyrene solubility, and analytical ultracentrifugation data, it is proposed that PMAOVE undergoes structural unfolding and at higher SDS concentrations mixed micelles are formed.     

Interactions in solution between a hydrophobic polymer and various kinds of surfactants

Interactions in solution between a hydrophobic polymer and surfactants were studied by viscometry, light scattering and conductimetry measurements. One polymer, poly(2-ethyl hexyl methacrylate) (P2EHMA), five surfactants, sodium dodecyl sulfate (SDS), hexadecyl trimethylammonium bromide (HTAB), hexadecyl pyridinium chloride (HPCl), and ethoxylated nonyl phenol containing 10 or 25 segments of ethylene oxide (NP10 or NP25), and one solvent mixture, THF/6 vol% H₂O were used in this work. For the P2EHMA/surfactant mixtures in THF/6 vol% H₂O, the viscosity versus surfactant concentration curves are similar in shape for all surfactants. They show a minimum at low surfactant concentration followed at higher concentration by a maximum and a plateau. An interpretation of these curve shapes is proposed. The relevance of these findings to the problem of the polymer/surfactant interactions in latexes and latex films is also discussed.     

Compatibility studies on solutions of polymer blends by viscometric and ultrasonic techniques

Detailed viscometric and ultrasonic velocity studies have been conducted on solutions of blends of poly(methyl methacrylate) with poly(vinyl acetate), poly(vinyl chloride) with poly(vinyl acetate) and poly(methyl methacrylate) with polystyrene over an extended range of concentrations and temperatures in toluene, chlorobenzene and toluene respectively. The plots of both absolute viscosity and ultrasonic velocity vs composition deviate from linearity according to the degree of compatibility of polymer blends, at all concentrations and temperatures. The curves for compatible systems are linear. These investigations offer an entirely new approach to the study of the compatibility of polymer blends.     

Synthesis of monodispersed poly(acrylonitrile) microspheres by dispersion polymerization in compressed liquid dimethyl ether

In this study, monodispersed spherical particles of poly(acrylonitrile) were synthesized via dispersion polymerization in compressed liquid dimethyl ether using 2,2′-azobisisobutyronitrile (AIBN) as an initiator and five kinds of surfactants: PDMS-g-pyrrolidonecarboxylic acid (Monasil PCA™), PDMS modified surfactants, SS-5050K™, KF-6017™, poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10- heptadecafluorodecyl acrylate), and poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate). Using Monasil PCA as a surfactant, uniform and spherical polymer particles were generated. The size of the microsphere particles was reduced via an increase in the concentration of Monasil PCA and a reduction in the monomer concentration. Increases in the concentration of AIBN resulted in a broad distribution of microspheres. Reaction temperature and pressure did not exert significant effects on the size and size distribution of the polymer particles.     

Thermal analysis of the interaction of inorganic pigments with p(nBA/MMA) acrylic emulsion before and after UV ageing

Differential scanning calorimetry (DSC) and thermogravimetry (TG) analyses were used to investigate the influence of inorganic pigments on the photo-oxidative stability of an acrylic emulsion binding medium. For this purpose, three different types of inorganic pigments such as ultramarine blue, cadmium red and hydrated chromium oxide green were selected and mixed with an acrylic emulsion binding medium of poly(n-butyl acrylate/methyl methacrylate). These laboratory mixed paints were analysed before and after UV exposure for different periods of time. In addition, three acrylic commercial paints such as ultramarine blue, cadmium red and chromium oxide green from Liquitex^® and Rembrandt^® companies were also analysed. The results obtained with both thermal techniques suggested that ultramarine blue has the strongest influence on the photo-oxidative stability of the binding medium. A higher increase of the glass transition temperature T _g was observed by DSC analysis on the UV aged binder mixed with ultramarine blue. This result was confirmed by the TG investigations that showed a gradual decrease of the initial temperature of degradation as well as the strongest decrease of the final mass% of the organic compounds. Similar results were measured from the Liquitex^® and Rembrandt^® blue paints.     

Column Liquid Chromatography in Polymer Degradation Studies

Abstract

Column liquid chromatography performed on polymer samples subjected to degradation reactions makes up an important source of information for determining the polymer degradation mechanisms. In the present paper it is shown how molecular weight distribution changes and formation of new compounds due to degradation reactions can be conveniently analyzed by size exclusion and adsorption/partition chromatography. The sensitivity and uniqueness of the approach is demonstrated with proper examples. Particularly, it is reported how liquid chromatography has been helpful in establishing the presence of weak links in polystyrene samples, in modelling the thermal degradation mechanisms of poly(alpha-methyl styrene) and of poly(methyl methacrylate), in showing the occurrence of termination reactions by radical coupling in poly(methyl methacrylate) samples and the influence of acrylonitrile content on the degradation of styrene-acrylonitrile copolymers.     

ABA triblock copolymers from two mechanistic techniques: Polycondensation and atom transfer radical polymerization

ABA triblock copolymers were synthesized using two polymerization techniques, polycondensation, and atom transfer radical polymerization (ATRP). A telechelic polymer was synthesized via polycondensation, which was then functionalized into a difunctional ATRP initiator. Under ATRP conditions, outer blocks were polymerized to form the ABA triblock copolymer. Six types of samples were prepared based on a poly(ether ether ketone) or poly(arylene ether sulfone) center block with either poly(methyl methacrylate), poly(pentafluorostyrene), or poly(ionic liquid) outer blocks. As polycondensation results in polymers with broad molecular weight distribution (MWD), the center of these triblock copolymers are disperse, while the outside blocks have narrow MWD due to the control afforded from ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 228–238     

Review on gel polymer electrolytes for lithium batteries

This paper reviews the state-of-art of polymer electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on five polymer hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP) as electrolytes. Also the ionic conductivity, morphology, porosity and cycling behavior of PVdF-HFP membranes prepared by phase inversion technique with different non-solvents have been presented. The cycling behavior of LiMn₂O₄/polymer electrolyte (PE)/Li cells is also described.     

Polymer matrix dependence of conformational dynamics within a π-stacked perylenediimide dimer and trimer revealed by single molecule fluorescence spectroscopy

The conformation of embedded molecule in a polymer matrix is sensitive to the local nano-environment that the molecule experiences. Particularly, single molecule spectroscopic methods have been utilized to visualize each molecular conformation in local sites of the polymer matrix by monitoring rotational diffusion and fluctuating fluorescence of the molecule. Here, we have performed single molecule spectroscopic experiments on a π-stacked perylenediimide (PDI) dimer and trimer, in which enhanced π-π interaction in π-stacked PDIs makes the fluorescence lifetime longer, embedded in two different polymers, namely poly(methyl methacrylate) (PMMA) and poly(butyl methacrylate) (PBMA), to reveal the conformational change depending on the polymer matrix. The fluorescence lifetimes of π-stacked PDIs are influenced by polymer surroundings because their molecular conformations are dependent on their interactions with the local environment in the polymer matrix. Furthermore, from an in-depth analysis of autocorrelation functions of fluorescence intensity trajectories, we could assign that the first autocorrelation value (lag 1) is larger as the intensity trace becomes more fluctuating. Thus, we expect that π-stacked PDIs, a model system for the formation of PDI excimer-like states, can be utilized to probe the surrounding nano-environment by monitoring the conformational change in real time.     

Characterization of the chemical composition of a block copolymer by liquid chromatography/mass spectrometry using atmospheric pressure chemical ionization and electrospray ionization

Liquid chromatography/mass spectrometry (LC/MS) with electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) in the positive and negative ion modes was used for the characterization of a block copolymer consisting of methoxy poly(ethylene oxide) (mPEO), an epsilon-caprolactone (CL) segment and linoleic acid (LA), used as surfactant in water-based latex paints. Chromatographic separation was obtained based on the number of CL units in the polymer species and the presence of an mPEO and/or LA tail. Different ionization methods were found to be complementary and only their combination allowed the qualitative profiling of the chemical composition. The LC/MS method has proven valuable for following the reaction in time, as well as for comparison of different polymeric surfactants.     

Formation of linear polymers in confined intranetwork space during synthesis of sequential semi-interpenetrating polymer networks

Sequential semi-interpenetrating polymer networks based on polyurethanes with different crosslink densities and linear polystyrene, poly(butyl methacrylate), and poly(methacrylic acid) have been studied. For the parent polyurethanes, the molecular mass of chain segments between crosslink junctions is estimated by the Flory-Rehner method. The kinetics of formation of linear polymers in semi-interpenetrating polymer networks is investigated as a function of the crosslink density of the polyurethane network. The molecular-mass distributions of linear polymers developed in semi-interpenetrating polymer networks are examined by size-exclusion chromatography. The relationship between the kinetics of formation of linear components under the conditions of confined space and their molecular mass is established.     

Complexation of Fe3+, Cu2+, and Cr3+ β-diketonates with poly(urethane) and poly(methyl methacrylate) in semi-interpenetrating networks: Effect on phase separation

Complexation of iron, copper, and chromium β-diketonates with poly(urethane) and poly(methyl methacrylate) in semi-interpenetrating polymer networks was studied by IR spectroscopy and ESR using various paramagnetic probes. It was shown that types of complexes arising in semi-interpenetrating polymer networks depend on the central metal ion in a chelate. In the networks containing iron and copper β-diketonates, formation of complexes between chelates of these metals and donor groups of PUR and PMMA promotes mutual penetration of poly(urethane) and poly(methyl methacrylate) phases. As a consequence, the degree of their separation decreases and the interphase region widens.     

Time-lag focusing and cation attachment in the analysis of synthetic polymers by matrix-assisted laser desorption/ionization-time-of-flight-mass spectrometry

Ultraviolet matrix-assisted laser desorption/ionization-mass spectrometry has been employed with time-lag focusing to explore its utility for the characterization of synthetic polymers with broad distributions. Mixtures of five polymer standards with narrow molecular weight distributions were analyzed. The spectra were found to be broadly those expected for three different types of polymer systems—poly(styrene), poly(methyl methacrylate), and poly(ethylene glycol)—when equimass mixtures were used. Large changes in the apparent molecular weight distribution of poly(ethylene terephthalate) were observed when the cation was varied. The shift in the envelope was found to be related to the size and the ability of the oligomers to solvate the cation.     

A glucose sensor via stable immobilization of the GOx enzyme on an organic transistor using a polymer brush

Recently, there has been significant research in the area of organic electrochemical transistors (OECTs) because of their superior aptitude of chemical and biological sensing. Here it is shown for the first time the incorporation of polymer brushes to a transistor. Polymer brushes were chosen for their biocompatible properties and their ability to covalently tether enzymes and other biomolecules to different surfaces. OECTs were fabricated from the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate), PEDOT:PSS, and polymerized from the surface a mixed polymer brush of poly(glycidyl methacrylate) and poly(2-hydroxyethyl methacrylate). The brushes were functionalized with glucose oxidase and measured in terms of electrical performance and long-term stability. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 372–377