Physicochemical properties of ceramic tape involving Ca<Subscript>0.05</Subscript> Ba<Subscript>0.95</Subscript> Ce<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3</Subscript> as an electrolyte designed for electrolyte-supported solid oxide fuel cells (IT-SOFCs)

Energetic materials such as a mixture of guanidine nitrate (GN)/basic copper nitrate (BCN) are used as gas generators in automotive airbag systems. However, at the time of the airbag inflation, the gas generators release toxic combustion gases such as CO, NH₃, and NO_x. In this study, we investigated the combustion and thermal decomposition behaviors of GN/BCN mixture, focusing primarily on their exhaust gas composition. As a result, when the exhaust gas of the combustion under constant pressure in an inert gas stream was analyzed using a detection tube, the amount of NO_x (mainly NO) yielded greater decrease with increasing atmospheric pressure as compared to the amounts of CO and NH₃. Thus, provided GN/BCN is ignited in a closed container, a large amount of NO_x is presumed to have been released during the initial stage of combustion, which yielded comparatively low pressure. Results of the thermogravimetry–differential scanning calorimetry–Fourier transform infrared spectroscopy (TG/DSC/FTIR) indicated that the GN/BCN mixture caused endothermic decomposition at 170 °C and exothermic decomposition at 208 °C, which was accompanied by 66% mass loss. The decomposition gases, CO₂, N₂O, and H₂O, were detected via FTIR spectrum. Because N₂O was not detected in the combustion gas, it was suggested that the detected N₂O was generated at a low temperature and decomposed in high-temperature combustion.     

ZnO-SnO2纳米复合氧化物的制备、表征及其气敏性质的研究(英)

本文用可控湿化学共沉淀法研制了ZnO-SnO₂纳米晶体复合气敏材料并考察其对有毒气体CO和NO₂的气敏性质。用TEM、BET和XRD等方法表征了纳米复合物的粒度、形貌、比表面、热稳定性和相稳定性。研究了制备的可控参数，如金属阳离子总浓度、沉淀pH值和老化时间等对复合物气敏性质的影响。研究结果表明，该纳米复合氧化物具有化学均一性，高度热稳定和相稳定性，对CO和NO₂具有高的灵敏度和选择性，其气敏性质依赖于复合物组成、焙烧温度和操作温度。通过2wt％金属Cd的掺杂和10wt% Al2O3氧化物的表面包覆大大提高了气体的灵敏度和选择性。用程序升温吸脱附研究了纳米复合物表面对气体的吸脱附性能，并探讨了气敏机理。     

Recent progress in applications of graphene oxide for gas sensing: A review

This paper is a review of the recent progress on gas sensors using graphene oxide (GO). GO is not a new material but its unique features have recently been of interest for gas sensing applications, and not just as an intermediate for reduced graphene oxide (RGO). Graphene and RGO have been well known gas-sensing materials, but GO is also an attractive sensing material that has been well studied these last few years. The functional groups on GO nanosheets play important roles in adsorbing gas molecules, and the electric or optical properties of GO materials change with exposure to certain gases. Addition of metal nanoparticles and metal oxide nanocomposites is an effective way to make GO materials selective and sensitive to analyte gases. In this paper, several applications of GO based sensors are summarized for detection of water vapor, NO₂, H₂, NH₃, H₂S, and organic vapors. Also binding energies of gas molecules onto graphene and the oxygenous functional groups are summarized, and problems and possible solutions are discussed for the GO-based gas sensors.     

Preparation and structural characterization of nanosized BiFe<Subscript>0.6</Subscript>Mn<Subscript>0.4</Subscript>O<Subscript>3</Subscript> as a novel material with high sensitivity towards LPG

Nanocrystalline BiFe_0.6Mn_0.4O₃ powders were synthesized by sol–gel citrate method and studied for gas sensing behavior to reducing gases such as LPG, CO, CH₄ and NH₃. The composition and the structure of the powders have been investigated by means of XRD and TEM. The result shows that the BiFe_0.6Mn_0.4O₃ powders have a rhombohedral distorted perovskite structure with an average crystallite size of 35–40 nm. The BiFe_0.6Mn_0.4O₃-based LPG sensor shows better sensitivity at an operating temperature of 250 °C. The dispersion of Pd on BiFe_0.6Mn_0.4O₃ in the ratio of 0.8 wt.% improved the sensitivity, selectivity and response time. In addition, it reduced the operating temperature from 250 to 210 °C for LPG sensor. The response time for LPG was less than 1 min.     

Hydrothermal synthesis of one-dimensional α-MoO3 nanomaterials and its unique sensing mechanism for ethanol

In gas sensor applications, the availability of highly sensitive and rapid response/recovery detector for ethanol gas is sparse. One-dimensional orthogonal crystalline molybdenum trioxide nanomaterials were synthesized by an economical and environmentally friendly hydrothermal method. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy spectroscopy (EDS) were used to investigate the structure and morphology of the nanometer materials. The relevant characterization shows that nanobelts are highly crystalline layered structures with a width of about 200 nm and a length of a few micrometers. The synthesized ethanol gas sensors based on α-MoO₃ semiconductor material show the highest response at 350 °C. Gas sensitivity tests indicated that α-MoO₃ nanobelts respond well to 50 ～ 600 ppm ethanol at optimal operating temperatures. The selectivity test among various reducing gases shows that the sensor responds better to ethanol compared to other gases such as xylene, NO₂, CO, and H₂ gases. This excellent sensing performance is attributed to the unique sensing mechanism formed in the layered MoO₃ nanobelts through the catalytic reaction between ethanol and MoO₃ lattice oxygen and adsorbed oxygen. The sensing mechanism of the co-catalytic effect of lattice oxygen and adsorbed oxygen on ethanol is also discussed in depth.     

Review of Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Reductant System in the Selective Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Ag/Al₂O₃ is a promising catalyst for the selective catalytic reduction (SCR) by hydrocarbons (HC) of NO _x in both laboratory and diesel engine bench tests. New developments of the HC-SCR of NO _x over a Ag/Al₂O₃ catalyst are reviewed, including the efficiencies and sulfur tolerances of different Ag/Al₂O₃-reductant systems for the SCR of NO _x ; the low-temperature activity improvement of H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃; and the application of a Ag/Al₂O₃-ethanol SCR system with a heavy-duty diesel engine. The discussions are focused on the reaction mechanisms of different Ag/Al₂O₃-reductant systems and H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃. A SO₂-resistant surface structure in situ synthesized on Ag/Al₂O₃ by using ethanol as a reductant is proposed based on the study of the sulfate formation. These results provide new insight into the design of a high-efficiency NO _x reduction system. The diesel engine bench test results showed that a Ag/Al₂O₃-ethanol system is promising for catalytic cleaning of NO _x in diesel exhaust.     

Tuning Interfacial Cu‐O Atomic Structures for Enhanced Catalytic Applications

Cu₂O/CuO_x (x=0, 1) nanocomposites with well‐defined morphologies have been widely applied in catalytic reactions. However, people still understand less about tuning interfacial Cu‐O atomic structures for enhanced catalytic applications, and a special review on this topic has not been reported so far. Herein, we summarize our understanding on tuning interfacial Cu‐O atomic structures based on the literature, including the formation as well as evolution mechanism of Cu‐O interfaces in Cu₂O/CuO and Cu₂O/Cu systems, and the improved performances in the fields of CO oxidation, NO_x oxidation, photoelectrocatalysis, water gas shift reaction, photodegradation of organic dyes, hydrogen evolution, and photoreduction of CO₂. Finally, we briefly propose several potential research directions.     

Low Temperature Plasma Assisted Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> in Simulated Marine Diesel Exhaust

Plasma Assisted Catalytic Reduction (PACR) of NO _x has been investigated at laboratory scale for gas stream compositions representative of marine diesel exhausts. PACR NO _x reduction in excess of 90% was measured at 350°C, a plasma specific energy of 60 J/l and two NO _x concentrations (1,200 and 1,800 ppm). PACR NO _x reduction of over 50% was measured for simulated marine engine conditions at 250°C, 60 J/l and 1,200 ppm NO _x . The performance under these conditions could be increased, achieving a peak of ∼74% NO _x reduction, although at a relatively high plasma power. Water, present in diesel exhaust, was shown to inhibit the poisoning effects of fuel sulphur using SO₂ as a representative exhaust component. The PACR system performance demonstrated tolerance to simulated fuel sulphur levels of up to 1% for the duration of the tests. PACR performance was also shown to be sensitive to the amount of hydrocarbon reductant used.     

Diamondoid Nanostructures as sp3‐Carbon‐Based Gas Sensors

Diamondoids, sp³‐hybridized nanometer‐sized diamond‐like hydrocarbons (nanodiamonds), difunctionalized with hydroxy and primary phosphine oxide groups, enable the assembly of the first sp³‐C‐based chemical sensors by vapor deposition. Both pristine nanodiamonds and palladium nanolayered composites can be used to detect toxic NO₂ and NH₃ gases. This carbon‐based gas sensor technology allows reversible NO₂ detection down to 50 ppb and NH₃ detection at 25–100 ppm concentration with fast response and recovery processes at 100 °C. Reversible gas adsorption and detection is compatible with 50 % humidity conditions. Semiconducting p‐type sensing properties are achieved from devices based on primary phosphine–diamantanol, in which high specific area (ca. 140 m² g^?1) and channel nanoporosity derive from H‐bonding.     

Pilot-Scale Experiment for Simultaneous Dioxin and NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Removal from Garbage Incinerator Emissions Using the Pulse Corona Induced Plasma Chemical Process

A pilot-scale pulse corona induced plasma chemical process (PPCP) reactor for controlling gas-phase dioxins and NO _x simultaneously is installed in a garbage incineration plant. The flow rate of the sampled flue gas is 5,000 Nm³/h (N: standard state) in maximum at the PPCP reactor, which consists of 22 wire-cylinder electrodes and is energized by a 50 kW nanosecond pulse high voltage generator. With an applied plasma energy density of 2.9–6.1 Wh/Nm³, the decomposition efficiency for dioxins is 75–84% based on TEQ (toxic equivalents); the conversion efficiency of NO to NO₂ is ~93% at maximum. The flue gas treated by the PPCP reactor is introduced at a rate of 50 Nm³/h to a wet-type chemical reactor, which uses an aqueous solution of sodium sulfite (Na₂SO₃). More than 90% of NO _x is reduced to nitrogen, with negligible byproducts such as NO₂ ⁻ or NO₃ ⁻ ions left in the solution.     

Hydrothermal synthesis of (Fe,N) co-doped TiO<Subscript>2</Subscript> powders and their photocatalytic properties under visible light irradiation

(Fe, N) co-doped titanium dioxide powders have been prepared by a quick, low-temperature hydrothermal method using TiOSO₄, CO(NH₂)₂, Fe(NO₃)₃, and CN₃H₅ · HCl as starting materials. The synthesized powders were characterized by XRD, TEM, BET, XPS, and UV–Vis spectroscopy. Experimental results show that the as-synthesized TiO₂ powders are present as the anatase phase and that the N and Fe ions have been doped into the TiO₂ lattice. The specific surface area of the powders is 167.8 m²/g by the BET method and the mean grain size is about 11 nm, calculated by Scherrer’s formula. UV–Vis absorption spectra show that the edge of the photon absorption has been red-shifted up to 605 nm. The doped titanium dioxide powders had excellent photocatalytic activity during the process of photo-degradation of formaldehyde and some TVOC gases under visible light irradiation.     

Optimization of strontium- doping concentration in BaTiO3 nanostructures for room temperature NH3 and NO2 gas sensing

In this study, we comprehensively present the gas sensing performance of strontium (Sr)-doped barium titanate (BaTiO₃) nanostructures which are synthesized by a low-temperature hydrothermal route. The in-situ doping of strontium in BaTiO₃ nanostructures is achieved with different molar concentrations of Sr, and the sensing performance was evaluated by screen printing process of products to form their thick films. The thick films of as-prepared Sr-doped BaTiO₃ (BaSrTiO₃) were investigated for gas sensing performance for various gases at different operating temperatures where strong response was observed for both nitrogen dioxide (NO₂) and ammonia (NH₃) gases at room temperature. Furthermore, the sensing response at room temperature for NH₃ and NO₂ gases was also studied with respect to Sr doping concentrations in BaTiO₃ nanostructures.     

Potentiometric NOx sensor based on stabilized zirconia and NiCr2O4 sensing electrode operating at high temperatures

The two types of electrochemical sensors using stabilized zirconia and the oxide sensing electrode (SE) were developed for NO_x detection at high temperatures. For the mixed-potential-type sensor, NiCr₂O₄ was found to give fairly excellent NO_x sensing characteristics in air among several spinel-type oxides tested. This NO_x sensor provided a linear correlation between EMF and the logarithm of NO or NO₂ concentration in the range 25–436 ppm and in the temperature range 550–650°C. With fixed bias voltage being applied between the SE (oxide) and the counter (Pt) electrode (CE), the EMF between SE and the reference (Pt) electrode (RE) was measured as a sensing signal. The NiCr₂O₄-attached tubular device was found to provide selective response to NO over NO₂ if SE was polarized at +175 mV versus RE. It was also found that this device gave selective response to NO₂ over NO, if SE was polarized at −250 mV versus CE. The new design of the planar device was proposed to avoid the cross-sensitivities to the others gases usually coexisting in car exhausts.     

Emission of Toxic HCN During NOx Removal by Ammonia SCR in the Exhaust of Lean‐Burn Natural Gas Engines

Reducing greenhouse gas and pollutant emissions is one of the most stringent priorities of our society to minimize their dramatic effects on health and environment. Natural gas (NG) engines, in particular at lean conditions, emit less CO₂ in comparison to combustion engines operated with liquid fuels but NG engines still require emission control devices for NO_x removal. Using state‐of‐the‐art technologies for selective catalytic reduction (SCR) of NO_x with NH₃, we evaluated the interplay of the reducing agent NH₃ and formaldehyde, which is always present in the exhaust of NG engines. Our results show that a significant amount of highly toxic hydrogen cyanide (HCN) is formed. All catalysts tested partially convert formaldehyde to HCOOH and CO. Additionally, they form secondary emissions of HCN due to catalytic reactions of formaldehyde and its oxidation intermediates with NH₃. With the present components of the exhaust gas aftertreatment system the HCN emissions are not efficiently converted to non‐polluting gases. The development of more advanced catalyst formulations with improved oxidation activity is mandatory to solve this novel critical issue.     

Facile synthesis of mesoporous WO3@graphene aerogel nanocomposites for low-temperature acetone sensing

Nanocomposites constructed by combining mesoporous metal oxides and graphene have received tremendous attention in wide fields of catalysis,energy storage and conversion,gas sensing and so on.Herein,we present a facile interface-induced co-assembly process to synthesize the mesoporous W03@graphene aerogel nanocomposites(denoted as mW03@GA),in which graphene aerogel(GA) was used as a macroporous substrate,mesoporous W03 was uniformly coated on both sides of graphene sheets through a solvent evaporation-induced self-assembly(EISA) strategy using diblock copolymer poly(ethylene oxide)-b-polystyrene(PEO-b-PS) as a template.The resultant mW03@GA nanocomposites possess well-interconnected macroporous graphene networks covered by mesoporous W03 layer with a uniform pore size of 19 nm,high surface area of 167 m~2/g and large pore volume of 0.26 cm~3/g.The gas sensing performance of mW03@GA nanocomposites toward acetone and other gases was studied,showing a high selectivity and great response to acetone at low temperature of 150℃,which could be developed as a promising candidate as novel sensors for VOCs detection.     

Ammonia gas sensor based on a spinel semiconductor,Co<Subscript>0.8</Subscript>Ni<Subscript>0.2</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanomaterial

Thick film of nanocrystalline Co_0.8Ni_0.2Fe₂O₄ was obtained by sol–gel citrate method for gas sensing application. The synthesized powder was characterized by X-ray diffraction (XRD) and transmission electron microscopy. The XRD pattern shows spinel type structure of Co_0.8Ni_0.2Fe₂O₄. XRD of Co_0.8Ni_0.2Fe₂O₄ revels formation of solid solution with average grain size of about 30 nm. From gas sensing properties it observed that nickel doping improves the sensor response and selectivity towards ammonia gas and very low response to LPG, CO, and H₂S at 280 °C. Furthermore, incorporation of Pd improves the sensor response and stability of ammonia gas and reduced the operating temperature upto 210 °C. The sensor is a promising candidate for practical detector of ammonia.     

Novel NO2 Gas Sensor Based on Cr(III) Complex Thin Film

The results concerning the gas‐sensing characteristics of novel NO₂ gas sensors, fabricated from complex [Cr(bipyO₂)Cl₂]Cl thin films, were first presented. The sensors exhibited high response to NO₂ gas in the concentration range from 1.97% to 6.67% at relative low temperatures (from room temperature to 348 K). No response to H₂S and SO₂ was observed. The maximum response for 6.03% NO₂ was approximately 11.7 at 338 K and 10 V operating voltage. The response time of the sensors was about 4.5 min for NO₂ and the recovery time about 40 s. The effect of the electrical resistance change of the sensors in the presence of NO₂ could be used for gas sensing measurements. The performance and reliability of the sensors showed their potential applications for monitoring and controlling NO₂ component continuously in chemical production.     

Fast response speed of mechanically exfoliated MoS2 modified by PbS in detecting NO2

MoS₂, acting as a promising gas sensing material, has shown huge potential in monitoring of toxic and harmful gases at room temperature. However, MoS₂-based gas sensors still suffer from poor gas sensing performance such as poor sensitivity, long response time. Constructing the heterostructure is an effective approach to improve gas-sensing performance of MoS₂. Herein, PbS@MoS₂ composites synthesized by mechanical exfoliation combining with wet-chemical precipitation are used to investigate its performance in detecting NO₂ at room temperature. The response value of PbS@MoS₂ gas sensor against NO₂ is significantly improved compared with the pure MoS₂ gas sensor. At the same time, the modification with PbS also accelerates the response speed of MoS₂, and the response time is almost reduced by two orders of magnitude, from hundreds of seconds to less than ten seconds. The enhanced response value and fast response time are mainly benefited from the modulation effect of NO₂ to PbS@MoS₂ heterostructure and the mechanically exfoliated MoS₂ surface with few defects. This work can be expected to provide useful guidance for designing composite materials with excellent gas sensing properties.     

Gas sensing properties of MWCNTs decorated with gold or tin oxide nanoparticles

Gas sensors based on oxygen plasma functionalised MWCNTs and plasma-treated nanotubes decorated either with gold nanoclusters or tin oxide nanoparticles were evaluated for the detection of NO₂, CO and ethylene. The sensor active layers were deposited by airbrushing onto micro-machined silicon transducers. Sensitivity, linearity, selectivity, response and recovery times and humidity effect were studied. XPS and TEM were employed to analyse the gas sensitive films. Among the different sensors tested, those based on tin oxide decorated MWCNTs showed the highest sensitivity to NO₂ (at ppb level) and the lowest humidity cross-sensitivity when operated at room temperature.     

Thermal decomposition of gallium nitrate hydrate Ga(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>×<Emphasis Type="Italic">x</Emphasis>H<Subscript>2</Subscript>O

The thermal decomposition of gallium nitrate hydrate (Ga(NO₃)₃·xH₂O) to gallium oxide has been studied by TG/DTG and DSC measurements performed at different heating rates. It is concluded that 8 water molecules are present in the hydrate compound. The anhydrous gallium nitrate does not form at any temperature as the reaction consists of coupled dehydration/decomposition processes that occur with a mechanism dependent on heating rate. TG measurements performed with isothermal steps (between 31 and 115°C) indicate that Ga(OH)₂NO₃ forms in the first stage of the reaction. Such a compound undergoes further decomposition to Ga(OH)₃ and Ga(NO₃)O, compounds that then decompose respectively to Ga(OH)O and finally to Ga₂O₃ and directly to Ga₂O₃. Diffuse reflectance Fourier transform IR spectroscopy (DRIFTIR) has been of help in assessing that the reaction consists of parallel dehydration/decomposition processes.