碱土Sr对Co/Al2O3催化剂甲烷部分氧化反应的影响

以γ-Al₂O₃为载体,采用共浸渍法制备了Sr-Co/Al₂O₃系列催化剂,研究了助剂Sr对Co/Al₂O₃催化剂上甲烷部分氧化(POM)制合成气反应的影响,并利用N₂物理吸附、X射线衍射、H₂-程序升温还原和热重等技术对催化剂的理化性质进行了表征。结果表明,未添加助剂的Co/Al₂O₃和800℃焙烧的Sr-Co/Al₂O₃催化剂在POM反应初期催化活性很低,然而,当添加Sr的质量分数高于2%时,催化剂表现出很好的催化活性和稳定性。焙烧后的新鲜催化剂上主要存在两类Co物种,一类是与载体相互作用较弱、易被H₂还原为单质的Co₃O₄;另一类是与载体相互作用较强、难还原、无催化活性的CoAl₂O₄尖晶石。在焙烧过程中,Sr易形成Sr₄Al₁₄O₂₅,从而削弱Co与Al₂O₃之间的相互作用,能在一定程度上抑制CoAl₂O₄物种的形成,提高催化剂的稳定性和活性。未添加Sr的Co/Al₂O₃在反应时易发生物相改变生成尖晶石,导致催化剂迅速失活;但当焙烧温度达到800℃时,添加有限量的Sr还是无法阻止CoAl₂O₄的产生。     

过渡金属修饰Fe2O3/Al2O3氧载体的Redox性能研究

采用冷冻干燥法分别制备了经Cu、Co、Mn、Ni修饰的Fe₂O₃/Al₂O₃氧载体。利用化学吸附仪,通过程序升温还原(H₂-TPR)和程序升温氧化(TPO)来研究经不同过渡金属修饰的Fe₂O₃/Al₂O₃与H₂和O₂的反应性能。实验发现,在Fe₂O₃/Al₂O₃中加入Cu、Co、Ni以后,氧载体与H₂的反应性都有提高,但是当在Fe₂O₃/Al₂O₃中加入Mn以后,氧载体的反应性和载氧能力反而下降。经Cu修饰的Fe₂O₃/Al₂O₃与H₂的反应性最高,且具有很好的反应稳定性,适合用于化学链燃烧。     

ZrO2修饰Al2O3纳米片负载钴催化剂的制备及其费托反应性能研究

通过水热法合成了Al₂O₃纳米片（Al₂O₃-CN）,采用浸渍法制备20%（质量分数）钴基催化剂,并应用于费托合成反应。制备的Al₂O₃-CN（226 m²/g）与商业氧化铝（Al₂O₃-C,249 m²/g）具有相近的比表面积,但Al₂O₃-CN孔尺寸分布更加集中。浸渍钴后,与Co/Al₂O₃-C催化剂相比,Co/Al₂O₃-CN催化剂表现出较高的还原度及更均匀的钴颗粒粒径分布。因此,Co/Al₂O₃-CN催化剂表现出更高的CO转化率和低的甲烷选择性。为了进一步提高Co/Al₂O₃-CN的催化性能,采用不同含量ZrO₂对Al₂O₃-CN进行修饰。表征结果表明,随着ZrO₂修饰量的增加,Al₂O₃-CN载体比表面积变化不明显,孔体积和孔径增大;相对应催化剂的钴颗粒粒径减小,活性位点数目增加。在相同反应条件下,经ZrO₂修饰催化剂CO转化率进一步提高,甲烷选择性降低。     

Co/Fe/Al2O3/cordierite催化C3H6选择性还原NO的实验研究

采用溶胶凝胶法和浸渍法制备了负载于蜂窝陶瓷上的Co/Fe/Al₂O₃/cordierite催化剂,在陶瓷管流动反应器上对其催化C₃H₆选择性还原NO的性能进行了测试。结果表明,该催化剂表现出最优脱硝性能,在模拟烟气条件下,当反应温度为550 ℃时可实现97%的脱硝效率。Co的引入可显著增强Fe/Al₂O₃/cordierite催化剂抗SO₂和H₂O的能力。在模拟烟气中同时引入0.02% SO₂和3% H₂O后,1.5Co/Fe/Al₂O₃/cordierite的脱硝性能受影响甚微,当反应温度高于500 ℃时1.5Co/Fe/Al₂O₃/cordierite催化C₃H₆还原NO的效率均可达到90%以上;相比之下,未经Co修饰的催化剂Fe/Al₂O₃/cordierite脱硝性能受到了严重的抑制,在整个反应温度区间（200-700 ℃）内,其催化C₃H₆还原NO的效率最高不足50%。XRD和SEM表征结果表明,经过适量的Co修饰后的1.5Co/Fe/Al₂O₃/cordierite表面变得更疏松,且形成了以钴铁和钴铝双金属氧化物为主要成分的球状晶粒。H₂-TPR结果表明,相比于Fe/Al₂O₃/cordierite,1.5Co/Fe/Al₂O₃/cordierite有更好的低温还原性能。Py-FTIR结果表明,Co的引入可使催化剂表面的Lewis酸明显增加,且生成了Brønsted酸。N₂吸附-脱附表征结果表明,Co可增大催化剂的比表面积。     

助剂对Co/Al2O3催化剂浆态床费托合成反应性能影响

考察了ZrO₂、Ru或Pt助剂对Co/Al₂O₃催化剂结构及浆态床费托合成反应性能的影响。实验结果表明,添加ZrO₂助剂可阻止或降低难还原铝酸钴的形成、促进催化剂的还原、提高Co/Al₂O₃催化剂对费托合成反应的催化活性、降低甲烷选择性并提高C₅₊烃选择性。H₂-TPR表征结果表明,少量Ru或Pt助剂均能降低Co-ZrO₂/Al₂O₃催化剂中钴物种还原温度(Co₃O₄→CoO和CoO→Co⁰),提高催化剂的还原度,催化剂呈现出良好的CO加氢反应活性。此外,催化剂组分间浸渍次序对费托合成反应性能有重要影响,载体γ-Al₂O₃先浸渍Zr组分,可有效抑制难还原化合物形成;Co、Ru组分共浸渍加强了Co和Ru组分密切接触程度,更利于钴物种的还原;Co、Pt组分依次浸渍更利于活性组分的均匀分布,催化剂具有最佳的费托合成反应性能。     

浆态床中Cu/ZnO/Al2O3/ZrO2+γ-Al2O3双功能催化剂一步法合成二甲醚

采用共沉淀法,制备了纤维状CD501甲醇合成催化剂,采用SEM、TEM、XRD和BET等手段对催化剂进行了表征;并将其进一步和γ-Al₂O₃进行混合,获得了Cu/ZnO/Al₂O₃/ZrO₂+γ-Al₂O₃双功能催化剂,考察了其在浆态床中一步法合成二甲醚过程的催化特性。结果表明,相比商业催化剂(COM)和LP201催化剂,新型的CD501催化剂具有更大的比表面积和Cu/Zn分散性。对于浆态床中一步法合成二甲醚过程,采用CD501与γ-Al₂O₃双功能催化剂,相比采用COM或LP201与γ-Al₂O₃双功能催化剂,CO转化率提高了一倍,且经过270h测试,CO转化率从61%降至57%,二甲醚时空产率从0.54g/(g·h)降至0.48g/(g·h),稳定性显著优于COM催化剂。当反应温度为250℃,压力为4.0MPa,空速为3000mL/(g·h),氢碳比为1.0时,该催化剂应用在浆态床一步法合成二甲醚时,CO转化率为61%,DME时空产率达到0.54g/(g·h)。     

焙烧温度对二甲醚水蒸气重整制氢 Cu/ZnO/Al2O3/Cr2O3+H-ZSM-5双功能催化剂性能的影响

采用共沉淀耦合机械混合法制备了Cu/ZnO/Al₂O₃/Cr₂O₃+H-ZSM-5双功能催化剂,并用于二甲醚水蒸气重整制氢反应,结合热重、傅里叶红外光谱、XRD、BET、H₂-TPR表征,考察了焙烧温度对Cu/ZnO/Al₂O₃/Cr₂O₃催化剂物理化学性质及双功能催化剂催化性能的影响。研究结果表明,400℃焙烧时,析出CuO粒子的同时伴有尖晶石相,进而在反应过程中对金属铜粒子起到良好的隔离作用。而焙烧温度较低时,催化剂分解不完全,催化剂活性位较少。焙烧温度大于500℃时,CuO粒子发生二次团聚,同时尖晶石相大量生成,造成催化剂活性位减少,活性较低。合适的焙烧温度为400℃,此时二甲醚转化率为92.9%,氢气收率可达到76.5%,具有较好的反应效果。     

耐硫甲烷化中H2S浓度对MoO3/Al2O3和CoO-MoO3/Al2O3催化剂的影响

在0 到12 mL·L^-1 (体积分数φ=0.00%-1.20%) 范围内考察了不同H₂S 浓度对25% (质量分数, w)MoO₃/Al₂O₃和5% (w) CoO-25%MoO₃/Al₂O₃催化剂甲烷化性能的影响. 结果表明, 5%CoO-25%MoO₃/Al₂O₃的甲烷化活性随H₂S浓度的增加单调上升, 而25%MoO₃/Al₂O₃对H₂S浓度并不敏感. 对比这两种催化剂发现, 只有在H₂S浓度高于0.40% (φ) 时, 在25%MoO₃/Al₂O₃中添加Co助剂才会有促进作用; H₂S浓度低于0.40% (φ)时, Co助剂会抑制25%MoO₃/Al₂O₃催化剂的甲烷化活性. 分别对反应前后的催化剂表征发现, H₂S浓度的改变不会对两种催化剂的物理结构产生明显的影响, 而是通过影响催化剂表面的金属硫化物活性位来影响催化剂的甲烷化性能. 耐硫甲烷化反应体系中较高的硫含量下Co助剂才表现出对25%MoO₃/Al₂O₃催化剂的促进作用. 该研究明确了在MoO₃/Al₂O₃催化剂中添加Co助剂的硫化氢浓度范围, 为工业上选择合适的催化剂提供了依据.     

CoAl2O4/Al2O3载体对钴基费托催化剂反应性能影响的研究

通过浸渍和高温焙烧,制得表面附着CoAl₂O₄微晶颗粒的改性Al₂O₃载体,并采用等体积浸渍法制备负载型Co基催化剂。结合 N₂物理吸附、XRD、H₂-TPR、XPS及H₂化学吸附等表征手段,研究改性载体及其负载钴基催化剂的织构特征;采用费托合成反应评价其催化性能。结果表明,Al₂O₃改性后,表面CoAl₂O₄的存在有效减少了载体与活性组分Co的相互作用,显著提高了催化剂的还原度和催化活性。载体的改性量在20%左右达到最佳值,继续增加,催化剂还原度和活性基本不再升高。载体改性促使催化剂CH₄选择性有所降低,C₅₊选择性略有提高。     

络合浸渍法制备Ag/Al2O3-TiO2催化剂及其催化燃烧丙烷性能

研究了制备过程中不同络合剂乙醇胺（ETA）、二乙醇胺（DTA）、三乙醇胺（TEA）及柠檬酸（CA）等对Ag/Al₂O₃-TiO₂催化剂理化性质的影响,并考察了其催化丙烷燃烧的活性。结果表明,络合浸渍法能够显著提高催化剂催化活性,其活性顺序依次为：Ag/Al₂O₃-TiO₂(IM,传统浸渍法) < Ag/Al₂O₃-TiO₂(TEA) < Ag/Al₂O₃-TiO₂(DTA) < Ag/Al₂O₃-TiO₂(ETA) < Ag/Al₂O₃-TiO₂(CA),表明CA作为络合剂效果最好。当CA与Ag的物质的量比为1:1时,催化剂的催化活性最佳。与Ag/Al-Ti(IM)催化剂相比,Ag/Al₂O₃-TiO₂催化剂的T₉₀（丙烷转化率为90%的反应温度）下降了81 ℃。由催化剂的结构分析发现,络合浸渍法制备的催化剂银物种的粒径明显变小、银的分散度提高、表面Ag⁰物种和表面吸附氧的含量增加,进而促进了丙烷催化燃烧性能的提升。      

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

We investigated high catalytic activity of Ni/HZSM-5 catalysts synthesized by the impregna-tion method, which was successfully applied for low-temperature steam reforming of bio-oil. The influences of the catalyst composition, reforming temperature and the molar ratio of steam to carbon fed on the stream reforming process of bio-oil over the Ni/HZSM-5 catalysts were investigated in the reforming reactor. The promoting effects of current passing through the catalyst on the bio-oil reforming were also studied using the electrochemical catalytic re-forming approach. By comparing Ni/HZSM-5 with commonly used Ni/Al₂O₃ catalysts, the Ni₂₀/ZSM catalyst with Ni-loading content of about 20% on the HZSM-5 support showed the highest catalytic activity. Even at 450 oC, the hydrogen yield of about 90% with a near complete conversion of bio-oil was obtained using the Ni₂₀/ZSM catalyst. It was found that the performance of the bio-oil reforming was remarkably enhanced by the HZSM-5 supporter and the current through the catalyst. The features of the Ni/HZSM-5 catalysts were also investigated via X-ray diffraction, inductively coupled plasma and atomic emission spectroscopy, hydrogen temperature-programmed reduction, and Brunauer-Emmett-Teller methods.     

Effects of Preparation Method on the Performance of Ni/Al2O3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Steam reforming of bio-oil derived from the fast pyrolysis of biomass is an economic and renewable process for hydrogen production. The main objective of the present work has been to investigate the effects of the preparation method of Ni/Al₂O₃ catalysts on their performance in hydrogen production by bio-oil steam reforming. The Ni/Al₂O₃ catalysts were prepared by impregnation, co-precipitation, and sol?Cgel methods. XRD, XPS, H₂-TPR, SEM, TEM, TG, and N₂ physisorption measurements were performed to characterize the texture and structure of the catalysts obtained after calcination and after their subsequent use. Ethanol and bio-oil model compound were selected for steam reforming to evaluate the catalyst performance. The catalyst prepared by the co-precipitation method was found to display better performance than the other two. Under the optimized reaction conditions, an ethanol conversion of 99% and a H₂ yield of 88% were obtained.     

一种适用于生物油低温制氢的碳纳米纤维促进的镍催化剂

氢气作为一种高热值的清洁能源广泛地应用于工业中. 研究证明: 生物质通过化学过程可以转化为多种气体燃料(氢气), 液体燃料以及高附加值的化学品. 生物质作为一种环境友好型再生洁净能源, 其研究越来越受到关注. 本文旨在探讨利用生物油为原料, 通过水蒸汽重整方法制备富氢合成气的过程. 利用均匀浸渍的方法制备了一种高分散的碳纳米纤维促进的镍(Ni/CNFs)催化剂, 并将普通的Al₂O₃作为载体的Ni/Al₂O₃催化剂和Ni/CNFs作对比. 研究了重整温度以及水蒸汽和碳摩尔比(n_S/n_C)对生物油水蒸汽重整制氢的影响. 结果表明: 碳纳米纤维作为载体用于生物油水蒸汽重整制氢的效果要远优于普通的Al₂O₃载体, 利用22% Ni/CNFs 催化剂时, 在实验温度范围内(350-550℃), 最高生物油转化率和氢气产率分别达到了94.7%和92.1%, 通过研究重整条件以及对催化剂进行表征探讨了生物油在水蒸汽重整过程中催化剂的构效关系.     

Methane steam reforming over rhodium promoted Ni/Al2O3 catalysts

The effect of Rh addition upon catalyst characteristics and performance in methane steam reforming was investigated using Rh-promoted Ni/Al₂O₃ catalysts. The number of reduced metal atoms exposed on the surface increased for the Rh-promoted catalysts. Rh-promoted catalysts showed an increase in CH₄ reforming activity; however, constant turnover frequencies for promoted and unpromoted catalysts suggest that the increase in the number of metal surface atoms caused the activity enhancement. Rh also facilitated reduction of Ni/Al₂O₃.     

Hydrogen Production From Crude Bio-oil and Biomass Char by Electrochemical Catalytic Reforming

We reports an efficient approach for production of hydrogen from crude bio-oil and biomass char in the dual fixed-bed system by using the electrochemical catalytic reforming method. The maximal absolute hydrogen yield reached 110.9 g H₂/kg dry biomass. The product gas was a mixed gas containing 72%H₂, 26%CO₂, 1.9%CO, and a trace amount of CH₄. It was observed that adding biomass char (a by-product of pyrolysis of biomass) could remarkably increase the absolute H₂ yield (about 20%-50%). The higher reforming temperature could enhance the steam reforming reaction of organic compounds in crude bio-oil and the reaction of CO and H₂O. In addition, the CuZn-Al₂O₃ catalyst in the water-gas shift bed could also increase the absolute H₂ yield via shifting CO to CO₂.     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1 Al0.7Oδcatalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1 Al0.7Oδautothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature, and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδwas found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts. Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

Hydrogen Production by Steam Reforming of Ethanol Over Mesoporous Ni–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript> Catalysts

This review paper reports the recent progress concerning the application of nickel–alumina–zirconia based catalysts to the ethanol steam reforming for hydrogen production. Several series of mesoporous nickel–alumina–zirconia based catalysts were prepared by an epoxide-initiated sol–gel method. The first series comprised Ni–Al₂O₃–ZrO₂ xerogel catalysts with diverse Zr/Al molar ratios. Chemical species maintained a well-dispersed state, while catalyst acidity decreased with increasing Zr/Al molar ratio. An optimal amount of Zr (Zr/Al molar ratio of 0.2) was required to achieve the highest hydrogen yield. In the second series, Ni–Al₂O₃–ZrO₂ xerogel catalysts with different Ni content were examined. Reducibility and nickel surface area of the catalysts could be modulated by changing nickel content. Ni–Al₂O₃–ZrO₂ catalyst with 15 wt% of nickel content showed the highest nickel surface area and the best catalytic performance. In the catalysts where copper was introduced as an additive (Cu–Ni–Al₂O₃–ZrO₂), it was found that nickel dispersion, nickel surface area, and ethanol adsorption capacity were enhanced at an appropriate amount of copper introduction, leading to a promising catalytic activity. Ni–Sr–Al₂O₃–ZrO₂ catalysts prepared by changing drying method were tested as well. Textural properties of Ni–Sr–Al₂O₃–ZrO₂ aerogel catalyst produced from supercritical drying were enhanced when compared to those of xerogel catalyst produced from conventional drying. Nickel dispersion and nickel surface area were higher on Ni–Sr–Al₂O₃–ZrO₂ aerogel catalyst, which led to higher hydrogen yield and catalyst stability over Ni–Sr–Al₂O₃–ZrO₂ aerogel catalyst.     

Combination of CO2 reforming and partial oxidation of CH4 over Ni/Al2O3 catalysts using fluidized bed reactor

The effects of the Ni loading, total feed flow rate, prereduction temperature, reaction temperature and feed gas ratio for combination of CO₂ reforming and partial oxidation of CH₄ over Ni/Al₂O₃ were investigated using a fluidized bed reactor. Methane conversion to syngas was drastically enhanced using a fluidized bed reactor over Ni/Al₂O₃ catalyst calcined at high temperature. The fluidized bed and the fixed bed reactor were compared and a promoting mechanism of the fluidized bed reactor was proposed. This revised version was published online in August 2006 with corrections to the Cover Date.     

负载Ni催化剂用于乙二醇蒸汽重整制氢催化性能研究

采用等体积浸渍法和共沉淀法制备了Ni催化剂,在固定床反应器上考察了Ni负载量、焙烧温度、反应温度等因素对乙二醇低温重整制氢反应活性和选择性的影响。应用X射线衍射、氮物理吸附、H₂程序升温还原等技术对负载型Ni催化剂进行了表征。结果表明,共沉淀法制备的Ni/CeO₂催化剂具有较小的NiO颗粒与CeO₂载体颗粒粒径,催化活性较高。添加少量氧化钴到Ni/CeO₂催化剂中可使H₂收率达72.6%,EG转化率达93.1%。在CeO₂中添加Al₂O₃能提高负载Ni催化剂的活性,乙二醇转化率达94.0%,H₂收率达67.0%;但添加SiO₂则使其活性明显变差。     

Hydrogenolysis of dimethyl disulfide in the presence of bimetallic sulfide catalysts

The hydrogenolysis of dimethyl disulfide in the presence of Ni,Mo and Co,Mo bimetallic sulfide catalysts was studied at atmospheric pressure and T = 160–400°C. At T ≤ 200°C, dimethyl disulfide undergoes hydrogenolysis at the S-S bond, yielding methanethiol in 95–100% yield. The selectivity of the reaction decreases with increasing residence time and temperature due to methanethiol undergoing condensation to dimethyl disulfide and hydrogenolysis at the C-S bond to yield methane and hydrogen sulfide. The specific activity of the Co,Mo/Al₂O₃ catalyst in hydrogenolysis at the S-S and C-S bonds is equal to or lower than the total activity of the monometallic catalysts. The Ni,Mo/Al₂O₃ catalyst is twice as active as the Ni/Al₂O₃ + Mo/Al₂O₃ or the cobalt-molybdenum bimetallic catalyst.