Determination of berberine and strychnine in medicinal plants and herbal preparations by pressurized liquid extraction with capillary zone electrophoresis.

A simple and rapid method for the determination of berberine and strychnine in medicinal plants and herbal preparations for regulatory purposes using a home-made pressurized liquid extraction (PLE) system with capillary zone electrophoresis (CZE) using ultraviolet detection at 254 nm was developed. The effects of pH, concentration of buffer, and organic modifiers in the electrophoretic separation were investigated. The buffer used for CZE contained 50 mM ammonium acetate, pH 3.1. The effect of temperature on the extraction efficiency of strychnine in medicinal plants by PLE was demonstrated. Comparable or higher extraction efficiency was achieved with PLE for strychnine in medicinal plants and berberine in herbal preparations compared to soxhlet extraction. The effect of matrix interference in medicinal plants and herbal preparations containing a number of medicinal plants samples using CZE was investigated by standard additional experiments. The reproducibility of the method using PLE with CZE was found to vary between 2.4 and 10.7% (n = 5/6) for different types of samples on different days.     

Optimization for quantitative determination of four flavonoids in Epimedium by capillary zone electrophoresis coupled with diode array detection using central composite design

Herba Epimedii (family Berberidaceae), Ying-Yang-Huo in Chinese, is a famous Chinese herbal medicine. Flavonoids are thought to be the major active components in it. A capillary zone electrophoresis (CZE) separation were developed for simultaneous determination of four flavonoids including icariin, epimedin A, epimedin B and epimedin C in Epimedium. The effects of the experimental variables on CZE had been optimized by using central composite design (CCD). The best separation of four flavonoids could be obtained using 50 mM borate buffer (pH 10.0) containing 22% acetontrile as modifier, while separation voltage was 15 kV and temperature was at 25 degrees C. The method developed is accurate, simple and reproducible, which could be used for quality control of Epimedium and its medical preparations.     

Optimized separation of pharmacologically active anthraquinones in Rhubarb by capillary electrochromatography

A capillary electrochromatography (CEC) method with diode-array detection has been developed for the separation of the therapeutically important anthraquinones from Rhubarb extract and commercial traditional Chinese drugs containing Rhubarb. The separation of four major anthraquinones (aloe-emodin, emodin, chrysophanol, and physcion) was optimized with respect to pH and concentration of buffers, addition of acetonitrile, applied voltage, and column temperature. Baseline separation was achieved for the four anthraquinones in less than 12 min using a background electrolyte consisting of 5 mM acetic acid (pH 4.5) with 80% acetonitrile. The possibility of CEC for the analysis of traditional Chinese medicines was discussed.     

Determination of aristolochic acids in medicinal plants (Chinese) prepared medicine using capillary zone electrophoresis

Aristolochic acids (I and II) are commonly found in medicinal plants such as Radix aristolochiae and have been reported to cause acute hepatitis and end-stage renal failure. The aim of this work was to develop a method for the analysis of aristolochic acids in medicinal plant/Chinese prepared medicine (CPM) using (CZE). The buffer used was 30 mM sodium tetraborate at pH 9.5, detection was at 254 nm, applied voltage at 18 kV and the temperature was set at 25 degrees C. The effect of ionic strength, pH, and applied voltage on the separation was investigated. The precision values (relative standard deviation, RSD, %) for the relative migration time and peak area or peak height for aristolochic acids I and II were found to be less than 0.3% and between 2.6 to 4.0%, respectively. The limit of detection for aristolochic acids I and II was found to be 1.2 and 0.9 mg/L, respectively. The proposed method using pressurized liquid extraction (PLE) with CZE was used to determine the amount of aristolochic acids in medicinal plants or CPM samples with complex matrix and the results were compared with high-performance liquid chromatography (HPLC). Method precision (RSD, n = 6) was found to be less than 4% when those from applied to medicinal plants and CPM samples.     

Pressurized liquid extraction-capillary electrophoresis-mass spectrometry for the analysis of polar antioxidants in rosemary extracts

A method based on capillary electrophoresis-electrospray-mass spectrometry (CE-ESI-MS) was developed to qualitatively characterize natural antioxidants from rosemary (Rosmarinus officinalis L.) in different fractions obtained by pressurized liquid extraction (PLE) using subcritical water. The parameters of CE-ESI-MS were adjusted allowing the separation and characterization of different compounds from rosemary in the PLE fractions. These parameters for CE are kind, pH and concentration of the separation buffer, parameters for ESI-MS are dry gas temperature and flow, nebulizing gas pressure, and make-up flow. The following analytical conditions were found most favorable: aqueous CE buffer (40 mM ammonium acetate/ammonium hydroxide, pH 9); sheath liquid containing 2-propanol-water (60:40, v/v) and 0.1% (v/v) triethylamine at a flow rate of 0.24 mL/h; drying gas flow rate equal to 7 L/min at 350 degrees C, nebulizing gas pressure of 13.8 kPa (2 psi), using a compound stability of 50%. Different antioxidant compounds (e.g., rosmarinic acid and carnosic acid) could be detected in the rosemary extracts by CE-ESI-MS without any additional treatment, enabling the determination of variations in the extract composition caused by the different PLE conditions (i.e., 60 and 100 degrees C). The results provide complementary information to HPLC analysis.     

Large volume sample stacking in capillary zone electrophoresis for the monitoring of the degradation products of metribuzin in environmental samples

A capillary zone electrophoresis (CZE) method with UV-vis detection has been developed for the simultaneous monitoring of the major degradation products of metribuzin, i.e. deaminometribuzin (DA), deaminodiketometribuzin (DADK) and diketometribuzin (DK). The dissociation acid constants have also been estimated by CE and no significant differences have been observed with the values obtained by applying other techniques. Optimum separation has been achieved in less than 9 min in 40 mM sodium tetraborate buffer, pH 9.5 by applying a voltage of 15kV at 25 degrees C and using p-aminobenzoic acid as internal standard. In order to increase sensitivity, large volume sample stacking (LVSS) with polarity switching has been applied as on-line pre-concentration methodology. Detection limits of 10, 10 and 20 ng/mL for DA, DADK and DK, respectively were obtained. The method has been applied to soil samples, after pressurized liquid extraction (PLE). Samples were extracted at high temperature (103 degrees C and 1500 psi) using methanol as extraction solvent and sodium sulphate as drying agent. This PLE procedure was followed by an off-line pre-concentration and sample clean-up procedure by solid-phase extraction (SPE) using a LiChrolut EN sorbent column. These last two procedures were also suitable for the direct treatment of groundwater samples before CE analysis. The combination of both off-line and on-line pre-concentration procedures provided a significant improvement in sensitivity. LVSS provided pre-concentration factors of 4, 36 and 28 for DK, DA and DADK, respectively and with SPE a pre-concentration of 500-fold for the case of water samples and of 2.5-fold in the case of soil samples was obtained. The method is suitable for the monitoring of these residues in environmental samples with high sensitivity, precision and satisfactory recoveries.     

Simultaneous determination of four tanshinones in Salvia miltiorrhiza by pressurized liquid extraction and capillary electrochromatography

A pressurized liquid extraction (PLE) and CEC were developed for the simultaneous determination of four tanshinones (dihydrotanshinone I, cryptotanshinone, tanshinone I, and tanshinone IIA) in Salvia miltiorrhiza. High extraction efficiency (>98.5%) was achieved under the optimum PLE conditions. A good separation was obtained by using a Hypersil C18 capillary (3 microm, 100 microm/25 cm) with a mixture of 30 mM Tris-HCl (pH 8.5)-ACN (1:3, v/v) as BGE solution running at 20 kV and 20 degrees C within 12 min. All the calibration curves showed good linearity (r2 >0.9958) within test ranges. The developed method showed good repeatability for the quantification of four investigated components in S. miltiorrhiza with intra- and interday variations of less than 4.4 and 6.8%, respectively. The validated method was successfully applied to quantify four tanshinones in S. miltiorrhiza, which is helpful to control the quality of S. miltiorrhiza.     

Pressurized liquid extraction versus other extraction techniques in micropreparative isolation of pharmacologically active isoflavones from Trifolium L. species

As a new sample preparation technique, pressurized liquid extraction (PLE), in combination with reversed-phase liquid chromatography (RP-LC) and photodiode-array (PDA) detection were used for the isolation and determination of phytoestrogenic isoflavones in hydrolyzed extracts obtained from aerial parts of five Trifolium L. (clover) species. To optimize the effectiveness of PLE procedure, variable extraction parameters: methanol and acetone (or their 75% aqueous solutions), as extraction solvents, temperatures (75, 100 and 125 °C) and the changeable number of static extraction cycles were tested. Additionally, two other micropreparative techniques: ultrasound-assisted extraction (UAE), and conventional solvent extraction (CSE), under optimized conditions, were also used and compared. Optimum extraction efficiency, expressed in the highest yield of biochanin A, formononetin, daidzein and genistein from plant material, with PLE, using methanol-water (75:25, v/v) as an extraction solvent, an oven temperature of 125 °C and three 5-min static extraction cycles, was obtained.     

Capillary zone electrophoresis for determination of carbohydrate-deficient transferrin in human serum

Carbohydrate-deficient transferrin (CDT) is the most specific marker for diagnosis of chronic excessive alcohol consumption and includes the serum transferrin (Tf) isoforms with two or less sialic acid residues (di-, mono-, and asialo-Tf). To monitor serum CDT, we developed a capillary zone electrophoresis (CZE) method based on the dynamic capillary coating with diethylenetriamine (DETA). The separation was performed in a bare fused-silica capillary (50 microm ID, 57 cm in length), applying a voltage of 25 kV and a temperature of 40 degrees C. Using a 100 mmol/L borate buffer, pH 8.4 with 3 mmol/L DETA, the Tf isoforms (asialo- to pentasialo-Tf) were resolved within 16 min. Enzymatic cleavage of sialic acid residues with neuraminidase and immunosubtraction were used to identify CDT isoforms. The relative amount of CDT expressed as area % of disialo-Tf isoform related to the area of tetrasialo-Tf in 50 healthy donors (24 males and 26 females; aged 25-50 years) was 3.15 +/- 0.76% (mean +/- SD). The comparison between CDT values obtained by this CZE procedure and the "Axis-Shield %CDT" kit gave r = 0.644, p < 0.001 (n = 290). This easy to use and inexpensive CZE procedure could be an ideal tool to investigate CDT proteins for clinical or forensic purposes.     

Application of pressurized liquid extraction followed by gas chromatography-mass spectrometry to determine 4-nonylphenols in sediments

A time- and solvent-saving method, pressurized liquid extraction (PLE), to extract 4-nonylphenol (4-NP) in sediment was developed. The effects of various operational parameters (i.e., temperature, pressure, etc.) for the quantitative extraction of 4-NP by PLE were investigated. The analytes were then identified and quantitated by a large-volume injection GC-MS technique. The 4-NP can be completely extracted by methanol at 100 degrees C and 100 atm combined with 15 min static and then 10 min dynamic extraction steps (1 atm = 101,325 Pa). Recovery of 4-NP in spiked blank kaolin samples was 98% with 5% RSD. The degrees of recovery of 4-NP in the spiked sediment samples from a reservoir and a polluted river were 111% with 4% RSD and 106% with 5% RSD, respectively. The perfect applicability of PLE for 4-NP was determined after testing it with spiked and aged samples. The extraction efficiency of the PLE was compared with conventional Soxhlet and bath ultrasonication extraction methods using the spiked sediment samples.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

Pressurized liquid extraction prior to liquid chromatography with electrochemical detection for the analysis of vitamin E isomers in seeds and nuts

Pressurized liquid extraction (PLE) was used to isolate tocopherols from seeds and nuts. Very clean extracts were obtained, which were injected directly into the chromatographic system. This enables rapid and simple control in food analysis. The PLE extraction temperature was set at 50 degrees C, with two cycles of extraction, a static time of 5 min, and acetonitrile as the extraction solvent. LC separation was accomplished on a Synergi Hydro-RP column with methanol-water (99.9:0.1, v/v) containing 2.5 mM acetic acid/sodium acetate buffer, as eluent. Coulometric detection, with a porous graphite electrode at +700 mV, was used. The method was successfully applied to the determination of alpha-, (beta + gamma)- and delta-tocopherols in almonds, sunflower seeds, hazelnuts and walnuts. The recoveries were in the 82-110% range. The results were validated with those obtained using sample treatment including alkaline hydrolysis.     

Analysis of pesticides in fruits by pressurized liquid extraction and liquid chromatography-ion trap-triple stage mass spectrometry

A multi-residue method using pressurized liquid extraction (PLE) and liquid chromatography-quadrupole ion trap-triple stage mass spectrometry (LC-IT-MS(3)) has been developed for determining trace levels of pesticides in fruits. The selected pesticides can be distinguished in: benzimidazoles and azoles, organophosphorus, carbamates, neonicotinoids, and acaricides. PLE has been optimized to extract these pesticide residues from oranges and peaches by studying the effect of experimental variables on PLE efficiency. Samples were extracted at high temperature and pressure (75 degrees C and 1500psi) using ethyl acetate as extraction solvent and acidic alumina as drying agent. The recoveries obtained by PLE ranged from 58% to 97% and the relative standard deviation (RSDs) from 5% to 19%. The limits of quantification (LOQs) of the compounds were from 0.025 to 0.25mgkg(-1), which are well-below the maximum residue limits (MRLs) established by the European Union (EU) and the Spanish legislations.     

Analysis of polyphenols using capillary zone electrophoresis--determination of the most effective wine sample pre-treatment method

A simple CZE method has been developed for the simultaneous determination of eight polyphenolic compounds. The influence of several experimental conditions such as buffer (concentration and pH) and temperature were studied. Optimum separation was achieved in less than 25 min by using a BGE of 50 mM Na(2)B(4)O(7) and 10 mM Na(2)HPO(4) at pH 9.6, a temperature of 25°C and an applied voltage of 25 kV. Good linearities for all eight analytes were obtained with correlation coefficients higher than 0.99. The LODs were between 0.03 and 5.05 μg/mL and the RSD values of the migration times were found to be less than 1%. The optimal separation conditions were then used for the identification and the quantitation of polyphenolic compounds in Cypriot wine samples using six different sample preparation procedures. In particular, two direct injection methods (without any extraction step), three different liquid-liquid extraction procedures and an SPE procedure were examined. These sample pre-treatment methods were also compared in order to determine the one that is the most effective, in regard to analyte recovery, time, difficulty, and reproducibility. Liquid-liquid extraction using diethyl ether as the organic solvent proved to be the most effective.     

虎杖中主要蒽醌的提取分离及HPLC分析测定

高压液相色谱法;虎杖中主要蒽醌的提取分离及HPLC分析测定     

Pressurized liquid extraction followed by high-performance liquid chromatography for determination of seven active compounds in Cortex Dictamni

A new method based on pressurized liquid extraction (PLE) followed by a sensitive and specific HPLC-DAD analysis is developed for determination of seven compounds in Cortex Dictamni. The operational parameters of PLE, such as extraction solvent, extraction temperature, extraction pressure, static extraction time, flush volume and extraction cycles were optimized, using the extraction efficiencies of dictamnine, obacunone and fraxinellone as targets. The optimized procedure employed MeOH as extraction solvent, 150 degrees C of extraction temperature, 1,500 psi extraction pressure, 5 min of static extraction time, 60% flush volume and the extraction recoveries of the three compounds were nearly to 100% for only one cycle. The following HPLC analysis was performed on a reversed-phase C(18) column with methanol-water as mobile phase in gradient manner, detected at 236 and 218 nm. The limits of detection (LOD) and limits of quantification (LOQ) of the seven compounds were in the range of 0.4-15.6 ng and 1.2-38.8 ng. This assay can be readily utilized as a quality control method for Cortex Dictamni and other related medicinal plants.     

Off-line coupling of pressurized liquid extraction and LC/ED for the determination of retinyl acetate and tocopherols in infant formulas

An analytical methodology including pressurized liquid extraction (PLE) as sample treatment to isolate retinyl acetate and tocopherols from infant formulas has been developed. The milk extracts were kept at −18 °C for 30 min and after filtration could be injected directly into the chromatographic system. Thus, a rapid and simple routine control method of these products is possible.

The parameters affecting both the extraction process and the liquid chromatography (LC) system were optimized. PLE was performed using one cycle of extraction during a static time of 5 min. Methanol was chosen as the extraction solvent for a temperature of 50 °C. Chromatographic separation was accomplished using a RP-18 column; the mobile phase used was methanol–water (94:6, v/v) containing 2.5 mM acetic acid/sodium acetate buffer. Electrochemical detection in amperometric mode with a glassy carbon electrode at +1100 mV was applied. The proposed methodology was successfully used for the determination of retinyl acetate, δ-tocopherol, (β + γ)-tocopherol and -tocopherol in different infant formulas. The analytes were evaluated in the same chemical form present in the samples. Recoveries were between 92 and 106%. A certified reference material of milk powder was also analyzed.     

Optimization of CZE for analysis of phytochemical bioactive compounds

Advantages of CZE such as high efficiency, low cost, short analysis time, and easy implementation result in its wide applications for analysis of phytochemical bioactive compounds (e.g. flavonoids, alkaloids, terpenoids, phenolic acid, saponins, anthraquinones and coumarins). However, several aspects, including sample preparation, separation, and detection have significant effects on CZE analysis. Therefore, optimization of these procedures is necessary for development of the method. In this review, sample preparation such as extraction method and preconcentration, separation factors including buffer type, concentration and pH, additives, voltage and temperature, as well as detection, e.g. direct and indirect UV detection, LIF and MS were discussed for optimization of CZE analysis on phytochemical bioactive compounds. The optimized strategies were also reviewed.     

Determination of Four Anthraquinones in Xanthophytum Attopvensis Pierre by Capillary Zone Electrophoresis

A capillary zone electrophoresis (CZE) method has been developed for the simultaneous determination of four anthraquinones in Xanthophytum Attopvensis Pierre. The effects of several factors such as the pH, concentration of the running buffer and the separation voltage were investigated to find the optimum conditions. The optimum conditions were an electrolyte containing 15 mmol L^?1 borate, at pH 9.64 and 17.5 kV applied voltage. The four analytes were completely separated within 5 min. Regression equations gave linear relationships between the peak area of each analyte and the concentration. The recoveries ranged from 96.5% to 106.2%. The method was successfully used in the analysis of extracts from Xanthophytum Attopvensis Pierre with a relatively simple extraction procedure, and the assay results were satisfactory.     

Qualitative and quantitative analysis of active flavonoids in Flos Lonicerae by capillary zone electrophoresis coupled with solid-phase extraction

Flavonoids are an important bioactive group in the commonly used herbal medicine Flos Lonicerae. A new method of capillary zone electrophoresis (CZE) coupled with solid-phase extraction (SPE) was developed for simultaneous assay of flavonoid aglycones and glycosides in Flos Lonicerae. Optimum CZE separation was achieved with a background electrolyte (BGE) solution consisting of 80 mM boric acid and 20 mM phosphate acid, adjusted to pH 8.1, with 15% acetonitrile (v/v) added, and applying a separation voltage of 28 kV. The SPE method was used for pretreating the complex matrix of botanical materials and good reproducibility was obtained when avicularin was used as internal standard. Linearity of the method was excellent with correlation coefficients (r2) in the range of 0.9995-0.9999 and detection limits were lower than 0.6 microg/mL for the four flavonoids. The obtained recoveries varied between 93 to 104% while the relative standard deviations (RSDs) were below 4.4% (n=3). The developed CZE method was successfully used for the separation of eight flavonoids and the quantification of the four flavonoids in five species of Flos Lonicerae.