On-Surface Synthesis and Spectroscopic Characterization of Laterally Extended Chevron Graphene Nanoribbons

We report the on-surface synthesis and spectroscopic study of laterally extended chevron graphene nanoribbons (GNRs) and compare them with the established chevron GNRs, emphasizing the consistency of bandgap reduction of semiconducting GNRs with increased width. The laterally extended chevron GNRs grown on Au(111) exhibit a bandgap of about 2.2 eV, which is considerably smaller than the values reported for chevron GNRs in similar studies.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Emerging Bottom‐Up Strategies for the Synthesis of Graphene Nanoribbons and Related Structures

The solution‐phase synthesis is one of the most promising strategies for the preparation of well‐defined graphene nanoribbons (GNRs) in large scale. To prepare high quality, defect‐free GNRs, cycloaromatization reactions need to be very efficient, proceed without side reaction and mild enough to accommodate the presence of various functional groups. In this Minireview, we present the latest synthetic approaches for the synthesis of GNRs and related structures, including alkyne benzannulation, photochemical cyclodehydrohalogenation, Mallory and Pd‐ and Ni‐catalyzed reactions.     

Theoretical investigations on the carbazole‐based conjugated polymers containing electron‐donating divinylaryl

The polycarbazoles have been proved to efficiently suppress the keto defect emission. Three carbazole‐based conjugated polymers, poly[9‐methyl‐3‐(4‐vinylstyryl)‐9H‐carbazole] (PBC), poly[9‐methyl‐3‐(2‐(5‐vinylthiophen‐2‐yl)vinyl)‐9H‐carbazole] (PBT) and poly[9‐methyl‐3‐(2‐(5‐vinylfuran‐2‐yl)vinyl)‐9H‐carbazole] (PBF), were investigated by quantum‐chemical techniques, and gain a detailed understanding of the influence of carbazole units and the introduction of electron‐donating on the electronic and optical properties. The electronic properties of the neutral molecules, HOMO‐LUMO gaps (ΔE), in addition to ionization potential (I_p) and electron affinity (E_a), are studied using B3LYP density functional theory. The lowest excitation energies (E_g) and the absorption wavelength are studied using the time dependent density functional theory (TDDFT). The calculated results show that all three series of polymers have good planarity. And the highest‐occupied molecular orbital (HOMO) energies lift about 0.36–0.61 eV and thus the I_P decrease about 0.01–0.19 eV compared to polycarbazole, suggesting the significant improved hole‐accepting and transporting abilities. By introducing the electron‐donating 1,4‐divinylphenylene or 2,5‐divinylthiophene or 2,5‐divinylfuran units in the backbone, and the lowest‐unoccupied molecular orbital (LUMO) energies decrease 0.20–0.39 eV. In addition, PBC, PBT and PBF have longer maximal absorption wavelengths than polycarbazole. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 706–714, 2009     

Pyrenoimidazole‐Based Deep‐Blue‐Emitting Materials: Optical,Electrochemical, and Electroluminescent Characteristics

A series of pyrenoimidazoles that contained various functional chromophores, such as anthracene, pyrene, triphenylamine, carbazole, and fluorene, were synthesized and characterized by optical, electrochemical, and theoretical studies. The absorption spectra of the dyes are dominated by electronic transitions that arise from the pyrenoimidazole core and the additional chromophore. All of the dyes exhibited blue‐light photoluminescence with moderate‐to‐high quantum efficiencies. They also displayed high thermal stability and their thermal‐decomposition temperatures fell within the range 462–512 °C; the highest decomposition temperature was recorded for a carbazole‐containing dye. The oxidation propensity of the dyes increased on the introduction of electron‐rich chromophores, such as triphenylamine or carbazole. The application of selected dyes that featured additional chromophores such as pyrene, carbazole, and triphenylamine as blue‐emissive dopants into multilayered organic light‐emitting diodes with a 4,4′‐bis(9H‐carbazol‐9‐yl)biphenyl (CBP) host was investigated. Devices that were based on triphenylamine‐ and carbazole‐containing dyes exhibited deep‐blue emission (CIE 0.157, 0.054 and 0.163, 0.041), whereas a device that was based on a pyrene‐containing dye showed a bright‐blue emission (CIE 0.156, 0.135).     

On‐Surface Synthesis of NBN‐Doped Zigzag‐Edged Graphene Nanoribbons

We report the first bottom‐up synthesis of NBN‐doped zigzag‐edged GNRs (NBN‐ZGNR1 and NBN‐ZGNR2) through surface‐assisted polymerization and cyclodehydrogenation based on two U‐shaped molecular precursors with an NBN unit preinstalled at the zigzag edge. The resultant zigzag‐edge topologies of GNRs are elucidated by high‐resolution scanning tunneling microscopy (STM) in combination with noncontact atomic force microscopy (nc‐AFM). Scanning tunneling spectroscopy (STS) measurements and density functional theory (DFT) calculations reveal that the electronic structures of NBN‐ZGNR1 and NBN‐ZGNR2 are significantly different from those of their corresponding pristine fully‐carbon‐based ZGNRs. Additionally, DFT calculations predict that the electronic structures of NBN‐ZGNRs can be further tailored to be gapless and metallic through one‐electron oxidation of each NBN unit into the corresponding radical cations. This work reported herein provides a feasible strategy for the synthesis of GNRs with stable zigzag edges yet tunable electronic properties.     

Synthesis and fluorescence behavior of 3‐methacryamide‐9‐carbazole and its polymer 1

A novel acrylic monomer‐bearing carbazole chromophore, 3‐methacrylamide‐9‐ethyl‐carbazole and its model compound 3‐isobutyramide‐9‐ethylcarbazole were synthesized by reaction of 3‐amino‐9‐ethyl carbazole and the corresponding acyl chloride in the presence of triethylamine. It can be polymerized easily by using azo‐bisisobutyronitrile as an initiator or photopolymerized without any sensitizer. The photochemical behavior of 3‐methacrylamide‐9‐ethyl‐carbazole, its polymer and 3‐isobutyramide‐9‐ethylcarbazole were investigated by recording the fluorescence spectra in N,N‐dimethylformamide. It was found that the fluorescence intensity of the monomer is dramatically lower than those of its polymer and the model compound in the same chromophore concentration. This phenomenon, termed as the ‘structural self‐quenching effect’, was commonly observed for acrylic monomers bearing chromophore moieties and ascribed to the coexistence of the electron‐donating chromophore and the electron‐accepting double bond within one molecule. The strong fluorescence of the polymer can be quenched by adding electron‐deficient monomers having no chromophore moieties such as methyl methacrylate and acrylonitrile, and the Stern–Volmer constants were determined. It is observed that the higher the electron deficiencies of the quenchers, the higher the Stern–Volmer constants, implying a stronger quenching effect.Copyright © 2000 John Wiley & Sons, Ltd.     

Discovery of Novel D‐A and D‐π‐A Structured Carbazole‐Based Formazan Dyes: Synthesis,Characterization, and Spectroscopic Studies

In the current study, new carbazole‐based formazan dyes, D‐A and D‐π‐A, were synthesized, and their spectroscopic properties were studied for the first time. For this aim, carbazole aldehyde compounds were modified by the derivatization of carbazole, a natural electron‐donor compound, from 3‐ and 9‐position. Then, hydrazone derivatives were synthesized from these aldehyde derivatives. Finally, D‐A ( 5A–C ) and D‐π‐A ( 6A–C ) carbazole–formazan dyes were obtained by the interaction of the hydrazone compounds with p‐substituted aniline. After characterization of the structures of these compounds, photophysical properties of the carbazole–formazans were studied in the different polarity media (i.e., acetonitrile, toluene, and chloroform) in order to detect the solvent effects. Because of the π‐conjugated bridge and the electron acceptor nitro group at the para position, D‐π‐A structured carbazole–formazan dye 6C showed the highest Stokes shift of 155 nm.     

Oriented Gold Nanorod Arrays: Self‐Assembly and Optoelectronic Applications

Self‐assembly of anisotropic plasmonic nanomaterials into ordered superstructures has become popular in nanoscience because of their unique anisotropic optical and electronic properties. Gold nanorods (GNRs) are a well‐defined functional building block for fabrication of these superstructures. They possess important anisotropic plasmonic characteristics that result from strong local electric field and are responsive to visible and near‐IR light. There are recent examples of assembling the GNRs into ordered arrays or superstructures through processes such as solvent evaporation and interfacial assembly. In this Minireview, recent progress in the development of the self‐assembled GNR arrays is described, with focus on the formation of oriented GNR arrays on substrates. Key driving forces are discussed, and different strategies and self‐assembly processes of forming oriented GNR arrays are presented. The applications of the oriented GNR arrays in optoelectronic devices are also overviewed, especially surface enhanced Raman scattering (SERS).     

Coherent Anti‐Stokes Emission from Gold Nanorods and its Potential for Imaging Applications

We used coherent anti‐Stokes scattering (CAS) to characterize individual gold nanorods (GNRs) and GNR aggregates. By creating samples with different densities of GNRs on silicon wafer substrates, we were able to determine surface coverage by scanning electron microscopy (SEM) and then correlate the coverage to the CAS intensities of the samples. The observed CAS signal intensity was quadratically dependent on the number of particles. We also examined the CAS signal as a function of the excitation polarization and found that the strongest signals in regularly oriented GNRs were observed when the beam polarization was aligned with the longitudinal axis of the GNRs. Irregularly oriented GNRs exhibited a different scattering pattern to that observed for regularly oriented GNRs. The polarization‐dependent scattering from oriented GNRs showed cos⁶ (θ) behavior. By imaging nanoscale‐sized GNR patterns using CAS and evaluating the results with SEM, we show that CAS can be used for efficient, label‐free imaging of nanoscale metallic particles.     

Syntheses and characterization of carbazole based new low‐band gap copolymers containing highly soluble benzimidazole derivatives for solar cell application

Newly designed 2H‐benzimidazole derivatives which have solubility groups at 2‐position have been synthesized and incorporated into two highly soluble carbazole based alternating copolymers, poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spirocyclohexane)] (PCDTCHBI) and poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spiro‐4′′‐((2′′′‐ethylhexyl)oxy)‐cyclohexane)] (PCDTEHOCHBI) for photovoltaic application. These alternating copolymers show low‐band gap properties caused by internal charge transfer from an electron‐rich unit to an electron‐deficient moiety. HOMO and LUMO levels are –5.53 and –3.86 eV for PCDTCHBI, and –5.49 and –3.84 eV for PCDTEHOCHBI, respectively. Optical band gaps of PCDTCHBI and PCDTEHOCHBI are 1.67 and 1.65 eV, respectively. The new carbazole based the 2H‐benzimidazole polymers show 0.11–0.13 eV lower values of band gaps as compared to that of carbazole based benzothiadiazole polymer, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT), while keeping nearly the same deep HOMO levels. The power conversion efficiencies of PCDTCHBI and PCDTEHOCHBI blended with [6,6]phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) are 1.03 and 1.15%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Modulatory Functionalization of Gold Nanorods Using Supramolecular Assemblies

Supramolecular‐assembly‐mediated functionalization of gold nanorods (GNRs) has been developed by reversible phase transfer between water and oils, which offers a facile method for fabricating robust GNRs with surface‐charge tunability. In this regard, trimethylammonium (TMA) GNRs were initially prepared from conventional cetyltrimethylammonium bromide (CTAB) GNRs by means of a ligand‐exchange reaction in the presence of an excess amount of TMA ligands. To further expand their functionality and potential applications, electrostatic assemblies of positively charged TMA‐GNRs with negatively charged oleate ions were prepared. These assemblies (OA‐GNRs) can undergo facile phase transfer from water to hexane. Interestingly, the reversible electrostatic assembly between the TMA and OA ions fabricated onto GNRs can be easily disrupted by treatment with HCl, which removes the OA ions from the GNRs to re‐form the TMA‐GNRs, which can be made soluble in aqueous media again. In addition, OA‐GNRs can be further used for the synthesis of negatively charged GNRs such as 11‐mercaptoundecanoic acid (MUA) GNRs, which are hard to prepare directly from CTAB‐GNRs. This versatile method for phase transfer and functionalization on GNRs is expected to broaden the scope of their applications in sensing, biomedical imaging, photothermal therapies, and drug delivery systems.     

Comparison of the Electrochemical and Luminescence Properties of Two Carbazole‐Based Phosphine Oxide EuIII Complexes: Effect of Different Bipolar Ligand Structures

The photoluminescence (PL), electrochemical, and electroluminescence (EL) properties of Eu^III complexes, [Eu(cppo)₂(tta)₃] ( 1 ) and [Eu(cpo)₂(tta)₃] ( 2 ; TTA=2‐thenoyltrifluoroacetonate) with two carbazole‐based phosphine oxide ligands, 9‐[4‐(diphenylphosphinoyl)phenyl]‐9H‐carbazole (CPPO) and 9‐(diphenylphosphoryl)‐9H‐carbazole (CPO), which have different bipolar structures, donor–π‐spacer–acceptor (D–π–A) or donor–acceptor (D–A) systems respectively, are investigated. The CPPO with D–π–A architecture has improved PL properties, such as higher PL efficiency and more efficient intramolecular energy transfer, than CPO with the D–A architecture. Gaussian simulation proved the bipolar structures and the double‐carrier injection ability of the ligands. The carrier injection abilities of triphenylphosphine oxide, CPO, and CPPO are gradually improved. Notably, the Gaussian and electrochemical investigations indicate that before and after coordination, the carrier injection ability of the ligands show remarkable changes because of the particularity of the D‐π–A and D–A systems. The electrochemical studies demonstrate that coordination induces the electron cloud to migrate from electron‐rich carbazole to electron‐poor diphenylphosphine oxide, and consequently increases the electron‐cloud density on diphenylphosphine oxide, which weakens its ability for electron affinity and induces the elevation of LUMO energy levels of the complexes. Significantly, the π‐spacer in the D–π–A system exhibits a distinct buffer effect on the variation of the electron‐cloud density distribution of the ligand, which is absent in the D–A system. It is demonstrated that the adaptability of the D–π–A systems, especially for coordination, is stronger than that of D–A systems, which facilitates the modification of the complexes by designing multifunctional ligands purposefully. 1 seems favorable as the most efficient electroluminescent Eu^III complex with greater brightness, higher efficiencies, and more stable EL spectra than 2 . These investigations demonstrate that the phosphine oxide ligands with D–π–A architecture are more appropriate than those with D–A architecture to achieve multifunctional electroluminescent Eu^III complexes.     

Synthesis and photovoltaic properties of functional dendritic oligothiophenes

Novel p‐type and low bandgap functional dendritic oligothiophenes bearing hole‐transporting carbazole as peripheral substituents and an electron‐withdrawing dicyanovinyl core group, namely, DCT(n)‐DCN, where n = 1 or 2 for solution‐processable photovoltaic (PV) applications have been synthesized. With electron‐donating carbazole surface‐functionalized moieties conjugated with dicyanovinyl core group, the optical bandgap of these functional dendritic oligothiophene thin‐films greatly reduces to 1.74 eV with a strong spectral broadening and a high ionization potential at ～5.5 eV as determined by UV photoelectron spectroscopy. The bulk heterojunction PV cells fabricated from these dendrimers blended with PC₇₁BM as an acceptor showed a power conversion efficiency up to 1.64% with an open circuit voltage of (V_oc) = 0.93 V in the annealed device. We have demonstrated that the desirable molecular and PV properties of dendritic oligothiophenes can be obtained/tuned by the incorporation of functional group(s) onto peripheral of the dendron and into the core. In addition, these functional dendritic oligothiophenes show superior functional properties even at low dendritic generation as compared to the unsubstituted higher generation dendritic oligothiophenes as a p‐type, low‐bandgap semiconductor for solution‐processable bulk heterojunction PV cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Parameters influencing the molecular weight of 3,6‐carbazole‐based D‐π‐A‐type copolymers

Condensation copolymerization reactions of carbazole 3,6‐diboronate with 4,7‐bis(5‐bromo‐2‐thienyl)‐2,1,3‐benzothiadiazole (DTBT) only produce low‐molecular‐weight donor (D)‐π‐acceptor (A) copolymers. High‐molecular‐weight copolymers for use in optoelectronic devices are necessary for achieving extended π‐conjugation and for controlling the copolymer processibility. To elucidate the cause of the persistently low molecular weight, we synthesized three 3,6‐carbazole‐based D‐A copolymers using copolymerizations of N‐9′‐heptadecanyl‐3,6‐carbazole with DTBT, N‐9′{2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethyl}‐3,‐6‐carbazole with DTBT, and N‐9′‐heptadecanyl‐3,6‐carbazole with alkyl‐substituted DTBT. We investigated several parameters for their influence on molecular copolymer weight, including the conformation of the chain during growth, the solubility of the monomers, and the dihedral angles between the donor and acceptor units. Size exclusion chromatography, UV–vis absorption spectroscopy, and computational studies revealed that the low molecular weights of 3,6‐carbazole‐based D‐A copolymers resulted from conjugation breaks and the resulting high coplanarity, which led to strong interactions between polymer chains. These interactions limited formation of high‐molecular‐weight‐copolymers during copolymerization. The strong intermolecular interactions of the 3,6‐carbazole moiety were exploited by incorporating 3,6‐carbazole units into poly[9′,9′‐dioctyl‐2,7‐flourene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] prepared from 9′,9′‐dioctyl‐2,7‐flourene and DTBT. Interestingly, the number average molecular weight increased gradually with increasing 2,7‐fluorene monomer content but the number of conjugation breaks was a range of 6–7. The hole mobilities of the copolymers were studied for comparison purposes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Precision Graphene Nanoribbon Heterojunctions by Chain-Growth Polymerization

Graphene nanoribbons (GNRs) are considered promising candidates for next-generation nanoelectronics. In particular, GNR heterojunctions have received considerable attention due to their exotic topological electronic phases at the heterointerface. However, strategies for their precision synthesis remain at a nascent stage. Here, we report a novel chain-growth polymerization strategy that allows for constructing GNR heterojunction with N=9 armchair and chevron GNRs segments ( 9-AGNR/cGNR ). The synthesis involves a controlled Suzuki–Miyaura catalyst-transfer polymerization (SCTP) between 2-(6′-bromo-4,4′′-ditetradecyl-[1,1′:2′,1′′-terphenyl]-3′-yl) boronic ester ( M1 ) and 2-(7-bromo-9,12-diphenyl-10,11-bis(4-tetradecylphenyl)-triphenylene-2-yl) boronic ester ( M2 ), followed by the Scholl reaction of the obtained block copolymer ( poly-M1/M2 ) with controlled M_n (18 kDa) and narrow Đ (1.45). NMR and SEC analysis of poly-M1/M2 confirm the successful block copolymerization. The solution-mediated cyclodehydrogenation of poly-M1/M2 toward 9-AGNR/cGNR is unambiguously validated by FT-IR, Raman, and UV/Vis spectroscopies. Moreover, we also demonstrate the on-surface formation of pristine 9-AGNR/cGNR from the unsubstituted copolymer precursor, which is unambiguously characterized by scanning tunneling microscopy (STM).     

Single component transparent free‐standing films based on polyhedral octasilicate‐core dendrimers bearing carbazole terminal groups and their emission properties

9H‐carbazole‐9‐ethyl and 9H‐carbazole‐9‐hexyl‐terminated polyhedral octasilicate (OS)‐core dendrimers, denoted as OS‐C2‐Cz and OS‐C6‐Cz, respectively, were prepared by ring‐opening reaction and subsequent condensation of octakis(propenyl succinicanhydrido)polyhedral octasilicate (OS‐SA) with 9H‐carbazole‐9‐ethanol (Cz‐C2‐OH) and 9H‐carbazole‐9‐hexanol (Cz‐C6‐OH), respectively. Both the dendrimers formed optical transparent coating films. In particular, the coating film of OS‐C2‐Cz was easily peeled off from a substrate and formed a free‐standing film. The results of X‐ray diffraction and differential scanning calorimeter suggest that the films of OS‐C2‐Cz and OS‐C6‐Cz were amorphous. Thermogravimetric analysis of OS‐C2‐Cz and OS‐C6‐Cz showed 10 wt % weight losses at 374 and 383 °C, respectively. Photoluminescence property revealed that the carbazole group in OS‐C2‐Cz is prevented the excimer formation, while the carbazole group in OS‐C6‐Cz formed the excimer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 628–633     

A New Poly(fluorene‐co‐carbazole) with a Large Substituent Group at the 9‐Position of the Carbazole Moiety: An Efficient Blue Emitter

Summary: A new poly(fluorene‐co‐carbazole) (PFC‐1) with a large substituent group (ADN, a naphthalene‐anthracene derivative moiety) at the 9‐position of carbazole was synthesized. Compared with poly(fluorene‐co‐carbazole)s that have an alkyl substituent group at the 9‐position of the carbazole, the UV‐vis absorption (or photoluminescent emission) peaks of PFC‐1 are in almost the same position both in solution and in the solid state, whereas films of the former give peaks at longer wavelengths than those in solution. The photoluminescent (PL) spectra of PFC‐1 indicate that the attachment of ADN to the poly(fluorene‐co‐carbazole)s gives rise to an efficient blue emission from non‐aggregated ADN. There is no difference evident between PFC‐1 and other reported poly(fluorene‐co‐carbazole)s in PL quantum yield, thermostability, and electrochemical behavior, which suggests that PFC‐1 is an efficient blue emitter.

UV‐Vis spectra of the poly(fluorene‐co‐carbazole) (PFC‐1), with a large substituent group (ADN, a naphthalene‐anthracene derivative moiety) at the 9‐position of carbazole, in toluene and in the film.     

Synthesis and chiroptical properties of optically active poly(ethynylcarbazole) derivatives: Substituent effect on the helix formation

Novel chiral acetylene monomers containing carbazole, 2‐ethynyl‐9‐[(S)‐2‐methylbutoxycarbonyl]carbazole ( 1 ), 3‐ethynyl‐9‐[(S)‐2‐methylbutoxycarbonyl]carbazole ( 2 ), 2‐ethynyl‐9‐[(S)‐2‐methylbutyl]carbazole ( 3 ), and 2‐ethynyl‐9‐[(S)‐4‐methylhexyl]carbazole ( 4 ) were synthesized and polymerized with [(nbd)RhCl]₂? Et₃N. The corresponding polyacetylenes with number‐average molecular weights ranging from 68,700 to 310,000 were obtained in good yields. Poly( 1 ) exhibited a large specific rotation and an intense Cotton effect in toluene, indicating that it formed a helix with predominantly one‐handed screw sense, while the other three polymers showed no evidence for taking a helical structure. Poly( 1 ) largely decreased the CD intensity upon heating from ?10 to 60 °C. Poly( 1 ) showed a Cotton effect in film state in a manner similar to solution state. No chiral amplification was observed in the copolymerization of 1 with achiral 2‐ethynyl‐9‐tert‐butoxycarbonylcarbazole ( 5 ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4450–4458, 2007