茶叶中除虫菊酯农药残留快速测定法

采用丙酮浸泡、超声提取茶叶中的除虫菊酯，经石墨碳固相小柱净化萃取后，用气相色谱-电子捕获检测法直接测定茶叶中的除虫菊酯的含量。甲氰菊酯、氯氰菊酯、氰戊菊酯和溴氰菊酯的回收率为90．4％～110％，测定结果的RSD为3．4％～8．7％（n=5），检出限为0．001～0．006mg／kg。     

凝胶渗透色谱-固相萃取净化测定茶叶中16种菊酯残留量

建立了以凝胶渗透色谱(GPC)和固相萃取(SPE)净化,气相色谱-质谱(GC-MS)负化学源(NCI)技术测定茶叶中七氟菊酯、 四氟菊酯、丙烯菊酯、联苯菊酯、胺菊酯、甲氰菊酯、氯氟氰菊酯、氟丙菊酯、苯醚氰菊酯、氟氯氰菊酯、氯氰菊酯、氟氰戊菊酯、氰戊菊酯、 氟胺氰菊酯、溴氰菊酯、氯菊酯等16种菊酯残留量的方法.样品经V(丙酮)∶V(乙酸乙酯)∶V(正己烷)＝1∶2∶1提取,经GPC去除大分子的色素和类脂杂质,弗罗里硅土 SPE柱进一步净化,以毒死蜱同位素D-10作内标,内标法定量.方法的回收率67.2%～108%之间.变异系数小于18%.16种菊酯方法定量限在0.0125～0.025 mg/kg之间.     

烟草中菊酯类农药残留量及其捕集转移率的测定

建立了一种同时测定烟草中5种拟除虫菊酯农药残留量及其捕集转移率的毛细管气相色谱法 ;样品经丙酮提取 ,石油醚萃取 ,硅酸镁载体净化 ,GC -ECD(63Ni)检测 ,外标法定量 ;实验表明 ,加标0.01×10-6～1.0×10-6 含量水平的功夫菊酯和溴氰菊酯 ,回收率为90%～96 % ,加标0.2×10-6～20×10-6 含量水平的甲氰菊酯、氯氰菊酯和氰戊菊酯 ,回收率为92 %～102 % ;同一样品中10次测定这5种菊酯类农药残留量的相对标准偏差为4.4 %～13%。     

S,S-氰戊菊酯间接竞争酶联免疫吸附分析方法研究

合成了S,S-氰戊菊酯的半抗原S-2-(4-氯苯基)-3-甲基丁酸-α-S-(N-丁酸基)-甲酰氨-(3-苯氧基)苄酯(Efvb).半抗原通过混合酸酐法与卵清蛋白(OVA)偶联作为包被抗原,活泼酯法与牛血清蛋白(BSA)偶联作为免疫抗原.用免疫抗原免疫新西兰大白兔,得到抗S,S-氰戊菊酯多克隆抗体.通过异源分析及检测条件优化,确立了间接竞争酶联免疫分析方法的最佳检测条件为pH 7.4,0.4 mol/L Na+、40％甲醇-PBS溶液,建立了S,S-氰戊菊酯酶联免疫分析方法.方法的抑制中浓度(IC50)值为(3.16±0.01)mg/L;检出限(IC10)为(0.0053±0.0012) mg/L.对甲氰菊酯、溴氰菊酯、氯氰菊酯、三氟氯氰菊酯及其代谢物戊菊酸没有明显交叉反应.在自来水、河水和土壤样品中添加S,S-氰戊菊酯,其回收率分别为82.3％～108.2％,83.1％～109.2％和72.0％～91.2％.     

微波处理-气相色谱法测定蒜薹中多种有机氯、拟除虫菊酯类农药残留

建立了微波处理-气相色谱法快速测定蒜薹中的8种有机氯类、拟除虫菊酯类农药残留的方法。样品切成2 cm左右的小段,采用家用微波炉处理,再用乙腈提取,提取液采用固相萃取技术分离、净化、浓缩后,进气相色谱分析,外标法定性、定量。该方法适用于三唑酮、联苯菊酯、甲氰菊酯、三氟氯氰菊酯、氟氯氰菊酯、氯氰菊酯、氰戊菊酯、溴氰菊酯等8种农药的残留分析。经过添加回收试验,8种农药的平均回收率在76.4%~105.8%之间,相对标准偏差(RSD)≤10%,符合农残分析要求。     

苹果果实各部位菊酯类农药残留量分析

用正己烷-丙酮(体积比为1∶1)作提取剂,采用石英毛细管柱、电子捕获检测器,用气相色谱法测定苹果果皮、果肉、果核中甲氰菊酯、氯氰菊酯、氰戊菊酯、溴氰菊酯农药残留量.对苹果果肉试验结果表明,甲氰菊酯的回收率为80.9%～103.6%,相对标准偏差为1.30%～5.18%;氯氰菊酯的回收率为86.1%～103.9%,相对标...     

气相色谱法测定化妆品中的 VE 含量

介绍了一种用气相色谱法准确快速测定品中ＶＥ２含量的新方法。该法以ＶＣ作保护剂,用环已烷提取样品,ＳＥＰ－ＰＡＫ ＡＬＵＭ－Ａ小柱净化。以氯氰菊酯内标物,在１？５％ＯＶ＝－１７色谱柱上进行分离,测定化妆口中ＶＥ含量。内标物与样品的分离度为１．５５。平均回收纺为９４．３％～９８．８％,相对标准偏差为１．７％～３．５％（ｎ＝５）。     

茶叶中7种拟除虫菊酯农药残留量的检测方法

建立了一种同时测定茶叶中７种拟除虫菊酯农药残留量的气相色谱方法,试样中的拟除虫菊酯酯农药残留经丙酮－水（体积比８：１）体系萃取,正己烷反萃取,然后用乙腈萃取,弗罗里硅土柱净化,以ＧＣ－ＥＣＧ方法测定,外标法定量。实验表明,试样中添加质量分数（ｗ）０．０１＊１０＾－６－１．０＊１０＾－６含量水平的联苯菊酯,氯菊酯、氯氰菊酯、氰戊菊酯、溴氰菊酯,方法回收率为７５．０％－１０３．０％,最小检测含量０．１＊１０＾－７（ｗ）;试样中添加０．００２＊１０＾－６－０．２０＊１０＾－６含量水平的甲氰菊酯,方法回收率为９２．０％－１００．０％,最小检测含量０．２＊１０＾－８（ｗ）;试样中添加０．００１＊１０＾－６－０．１０＾－６含量水平的三氟氯氰菊酯,方法回收率为９６．０％－１０２．０％,最小检测含量０．１＊１０＾－８（ｗ）。同     

加速溶剂萃取-气相色谱-串联质谱法测定罗非鱼中拟除虫菊酯类农药残留量

提出了气相色谱-串联质谱法测定罗非鱼中7种拟除虫菊酯类农药（联苯菊酯、甲氰菊酯、三氟氯氰菊酯、氯菊酯、氯氰菊酯、氰戊菊酯和溴氰菊酯）残留量的方法。样品以环己烷-乙酸乙酯（1+1）混合液为萃取剂,经加速溶剂萃取仪提取后,经Florisil固相萃取小柱净化后,用丙酮-正己烷（1+9）混合液淋洗,洗脱液于45℃水浴氮吹近干后用正己烷定容至1 mL,通过TR-5MS毛细管色谱柱分离,采用电子轰击离子源选择反应监测模式进行质谱测定。7种拟除虫菊酯类农药的检出限（3S/N）在0.20～2.1μg·kg^-1之间。以空白罗非鱼样品为基体,加入标准溶液进行回收试验,测得回收率在57.9%～107%之间,测定值的相对标准偏差（n=6）均小于12.0%。     

加速溶剂萃取(ASE)-全自动凝胶净化/在线定量浓缩联用仪(GPC/EVA)-气相色谱(GC)法测定植物源性食品中有机氯、菊酯类农药残留量

建立了植物源性食品中有机氯、菊酯类农药的残留分析检测方法。样品以丙酮:石油醚(2∶8)为提取剂,经加速溶剂萃取装置(ASE)提取,采用全自动凝胶净化/在线定量浓缩联用仪(GPC-EVA)净化,并直接浓缩装入气相进样小瓶中供气相色谱GC(μ-ECD)检测。该方法的检测低限:a-BHC、r-BHC、δ-BHC、pp′-DDE为0.005mg/kg,β-BHC、pp′-DDD、op′-DDT、pp′-DDT、氯氰菊酯、溴氰菊酯、氰戊菊酯、氯菊酯、甲氰菊酯的检测低限为0.01mg/kg。三个水平的添加回收实验大多数农药的回收率在65.9%-111.1%间,相对标准偏差小于20%。13种农药的线性良好,相关系数均大于0.999。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.