聚甲基丙烯酸甲酯微流控芯片分离DNA片段的初步研究

自从1995年Mathies^[1]首次将微流控芯片毛细管凝胶电泳用于基因测序研究以来,DNA片段的分离已成为微流控芯片应用的重要领域之一.最早应用于DNA分析的微流控芯片是玻璃芯片,聚合物微流控芯片以其品种多、成本低、易于加工,与玻璃芯片相比具有封接温度大大降低,微通道内电渗流显著减小等特点,已被成功应用于DNA片段的分离^[2,3].     

玻璃-PDMS复合芯片微流控气动微阀的研制

报道了一种基于玻璃-PDMS复合芯片微流控气动微阀的制作方法,该方法较Unger等^[1]的方法更为简单易行,并克服了PDMS芯片气动微阀刚性不足和与外流路连接困难的缺点,提高了微阀的可靠性.     

微流控芯片微孔膜液-液萃取系统

微流控芯片(Microfluidic chip)是微全分析系统(MTAS)研究中最为活跃的领域和发展前沿,在仪器微型化方面展现出很多优点^[1].Kitamori等^[2,3]根据多相层流无膜扩散分离技术建立了芯片上的微流控液-液萃取分离系统,对芯片上的液-液萃取方法进行了系统的研究.     

芯片式流通池顺序注射化学发光法测定水中的亚硝酸根

微流控芯片(Microfluidic chips)是微全分析系统(μTAS)研究中最为活跃的领域,在仪器微型化方面展现出很多的优点^[1].化学发光由于其自身的特性在微芯片检测中应用逐渐增多^[2,3].     

一种简单的微流控芯片正交型激光诱导荧光检测系统

对微流控芯片检测技术的研究一直是近年来微全分析系统领域的研究热点.激光诱导荧光(Laser induced fluorescence,LIF)检测技术因其具有较高的灵敏度,成为目前微流控分析芯片采用最广的检测方法^[1].     

基于复合型微流控芯片的紫外检测电泳分析系统的优化及应用

我们^[1]于2002年提出了复合型微流控芯片的紫外检测电泳分析系统.该系统具有简单可行和通用性好等优点,但也存在分离效果不佳的缺点..     

微流控芯片电化学检测单细胞分析

微流控芯片已被用于进行各种细胞分析的研究.最近,方肇伦等^[1]用十字型微流控芯片压力进样,激光诱导荧光检测进行了人单个血红细胞内谷胱甘肽的测定.用双T型微流控芯片电化学检测方法对小麦愈伤组织中抗坏血酸(AA)的单细胞分析进行了研究.     

微流控芯片液-液萃取-气相色谱联用系统的研究

微流控芯片多相层流技术自Yager等^[1]首次报道以来,已广泛应用于芯片上无膜渗析、过滤和萃取等前处理过程.2000年,Kitamori等^[2]报道了基于多相层流原理的芯片上液-液萃取系统,利用在微通道内形成并行流动的有机相和水相层流体系,通过溶质在液流间的分子扩散作用完成无膜的萃取分离操作.     

微流通道中溶质峰形不对称现象的研究

在微流控芯片分析中,由于微流通道微小的尺寸和检测器灵敏度的限制,容易出现诸如样品相对过载等引起溶质带偏离高斯分布(如前拖尾或者后拖尾等)的现象.引起溶质带峰形不对称的原因主要是由于吸附等温线^[1]和溶质带经过检测器时,由空间分布转化为时间分布所引起的扭曲所致^[2].     

在线衍生微流控芯片电泳和激光诱导荧光法测定单细胞中谷胱甘肽

微流控分析芯片的网络结构和微米通道尺寸适合于单细胞进样、控制和分离分析^[1~4].在测定细胞内容物时,大多采用柱前细胞内衍生法^[1,2,4],但操作复杂,需多次离心分离,且能透过细胞膜标记胞内组分的荧光试剂较少.     

Poly(Urethane)-Crosslinked Poly(HEMA) Hydrogels

Abstract

Hydrogels have been prepared from 2-hydroxyethyl methacrylate polymerized in the presence of isocyanate-terminated poly(ethylene glycol) (PEG) crosslinking agents. PEGS of molecular weights 200, 400, and 1000 were investigated. The crosslinked nature of the hydrogels was demonstrated by their insolubility in solvents which normally dissolve poly(HEMA). Hexamethylene diisocyanate (HDI) was mainly used as the isocyanate. The molecular weight of the PEG and the crosslinker content significantly influenced the equilibrium water sorption and mechanical properties of the saturated networks. It was observed that as the molecular weight of the PEG increased, the water sorption increased and the nominal modulus decreased. However, for higher levels of cross-linker, water sorption decreased and modulus increased at low molecular weight PEG; for PEG 1000, water absorption increased as crosslinker content increased. These results are explained by the competing effects of flexibility, crosslink density, and hydrophobicity contributed by the various constituents of the hydrogels.     

聚癸二酸丙三醇酯对聚乳酸的改性

以丙三醇和癸二酸为单体通过熔融缩聚制得了聚癸二酸丙三醇酯(PGS),并用其预聚物(p-PGS)对聚L-丙交酯(PLLA)进行共混改性.利用傅立叶变换红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)及凝胶渗透色谱(GPC)法对P-PGS的结构进行表征,并研究了改性后材料的力学性能、两相相容性、亲水性能和细胞相容性.结果表明:P-PGS具有支化分子结构,分散系数约为2.7;共混改性后的材料弹性模量和拉伸强度均有所下降,而断裂伸长率从7 %显著提高到150%左右;PLLA/PGS属于海岛式共混结构,PGS以小于10μm的尺寸均匀分布在PLLA基体中;共混后材料的亲水性也有一定的提高,且几乎保持了PLLA原有的细胞相容性.     

Secondary Structures in Synthetic Poly(Amino Acids): Homo- and Copolymers of Poly(Aib), Poly(Glu), and Poly(Asp)

The secondary structure of poly(amino acids) is an excellent tool for controlling and understanding the functionality and properties of proteins. In this perspective article the secondary structures of the homopolymers of oligo- and poly-glutamic acid (Glu), aspartic acid (Asp), and α-aminoisobutyric acid (Aib) are discussed. Information on external and internal factors, such as the nature of side groups, interactions with solvents and interactions between chains is reviewed. A special focus is directed on the folding in hybrid-polymers consisting of oligo(amino acids) and synthetic polymers. Being part of the SFB TRR 102 “Polymers under multiple constraints: restricted and controlled molecular order and mobility” this overview is embedded into the cross section of protein fibrillation and supramolecular polymers. As polymer- and amino acid folding is an important step for the utilization and design of future biomolecules these principles guide to a deeper understanding of amyloid fibrillation.     

Poly(dimethylsilylene-co-diphenylsilylene)

In this work several polyorganosilylenes were synthesized including homo-and copolymers containing SiMe₂ and SiPh₂ units. A Wurtz-type coupling reaction of the respective dichlorodiorganosilanes with sodium metal, varying the Ph₂SiCl₂/Me₂SiCl₂ ratio was the chosen synthesis method. Products with different characteristics for solubility, structure (cyclic or linear), composition, and molecular weight distribution could be obtained depending on the comonomer ratios employed. The polysilane derivatives were characterized by infrared spectroscopy (IR), proton nuclear magnetic resonance (¹H-NMR), and gel permeation chromatography (GPC). Valuable information related to the comonomers' reactivities was obtained, such as molecular weight distribution, composition, and relationships between yields of soluble, insoluble, and cyclic materials of each polycondensation reaction. © 1992 John Wiley & Sons, Inc.     

Functionalization of Conductive Poly(thiophenes) and Poly(pyrroles)

New methods for functionalization of conductive poly(thiophenes) and poly(pyrroles) using fused aromatics or crown ethers are discussed.     

聚L-丙氨酸-聚乙二醇嵌段共聚物纳米胶束的研究

分别以氨基聚乙二醇和氨基聚乙二醇单甲醚为大分子引发剂,采用开环聚合的方法合成了两亲性聚L-丙氨酸-聚乙二醇(PAE)和聚L-丙氨酸-聚乙二醇单甲醚(PAME)两种嵌段共聚物,其结构经1H NMR,IR,DSC,GPC等表征;利用园二色技术研究了其在水溶液中的二级结构,用芘荧光探针技术研究了其胶束的形成及其临界胶束浓度(CMC),利用透射电镜研究了胶束的形态。结果表明,在水溶液中共聚物链以α-螺旋构象形式存在,在一定条件下嵌段共聚物PAE-1,PAE-2,PAME-1和PAME-2能够形成球形的稳定胶束,PAE-1形成胶束的CMC为3.36×10-5mol.L-1,CMC值受嵌段类型和共聚物中聚L-丙氨酸链段含量的影响。     

Poly (dodecacarborane-siloxanes)

The need for elastomeric polymers which will maintain their elastic properties at high temperatures has led to a wide interest in inorganic-based polymers [l]. The development of carborane-siloxane polymers in the early 1960s was a breakthrough in the search for a high-temperature elastomer. Incorporation of a carborane moiety into the siloxane backbone significantly enhanced the overall thermal stability [2].     

Synthesis of long Poly(dA).Poly(dT) DNA without structural defects using enzymatic reaction; tailored ligated Poly(dA).Poly(dT)

Poly(dA).Poly(dT) molecules up to 1000 base pairs (bp) have been synthesized using enzymatic reaction, and characterization by STM observation shows that the DNA has no defects in the duplex structure.