Ambient temperature thermotropic liquid crystalline viologen bis(triflimide) salts

Two dicationic salts with bis(triflimide) as counterions exhibited crystal-to-smectic liquid crystalline phase transitions (T _m=41 and 37°C) and smectic-to-isotropic liquid phase transitions (T _i=112, 136°C). They had a broad liquid crystalline phase range (71–99°C) and an excellent range of thermal stability (360–364°C). Their mixtures of various compositions also displayed liquid crystalline properties from r.t. to an extended range of temperatures. They exhibited fluorescence in 1, 2-dimethoxyethane and methanol.     

Production,ultrasonic extraction,and characterization of poly (3‐hydroxybutyrate) (PHB) using Bacillus megaterium and Cupriavidus necator

Biodegradable polymer polyhydroxyalkanoates are one of the promising alternatives for conventional plastics. The present article focuses on a modified and novel method for the synthesis of poly (3‐hydroxybutyrate) (PHB) by two microorganisms, viz. Bacillus megaterium and Cupriavidus necator. These microbial cells were grown over fructose as a carbon source, and the produced PHB was recovered using ultrasound as well as solvent assisted extraction. The extracted PHB was characterized using FTIR, ¹H, and ¹³C NMR to observe the functional groups in the PHB molecule. The XRD characterization confirmed the partial crystalline nature of PHB, and the results of TGA, DTG, and DSC analysis attributed to the thermal stability of PHB. The major step of weight loss of PHB derived by B. megaterium and C. necator in TGA analysis was found to be 415°C and 289°C, respectively. These values were comparatively higher than standard PHB, for which it is 260°C. Similarly, the maximum degradation temperature for standard PHB is 236°C, whereas the maximum degradation temperature of PHB synthesized by B. megaterium and C. necator are 248°C and 277°C, respectively. This ascertains that the produced PHB has greater resistance to thermal degradation as compared with PHB standard. The melting point of synthesized PHBs were found to be 175°C to 176°C, which is similar to standard PHB. The glass transition temperature of the synthesized PHBs varies from –8°C to 6°C. The plausible reason behind the variances could be due to difference in crystallinity and molecular weight of polymer matrix. Nevertheless, thermal properties of PHB produced by B. megaterium and C. necator are found to be similar or much better than commercial PHB. The degree of crystallinity of synthesized PHBs are lower than previously reported literatures, which extends its range of applications.     

Highly thermal conductive benzoxazine‐epoxy interpenetrating polymer networks containing liquid crystalline structures

A diamine‐based benzoxazine monomer (Bz) and a liquid crystalline epoxy monomer (LCE) are synthesized, respectively. Subsequently, a benzoxazine‐epoxy interpenetrating polymer network (PBEI) containing liquid crystalline structures is obtained by sequential curing of the LCE and the Bz in the presence of imidazole. The results show that the preferential curing of LCE plays a key role in the formation mechanism of liquid crystalline phase. Due to the introduction of liquid crystalline structures, the thermal conductivity of PBEI increases with increasing content of LCE. When the content of LCE is 80 wt %, the thermal conductivity reaches 0.32 W m^?1 K^?1. Additionally, the heat‐resistance of PBEI is superior to liquid crystalline epoxy resin. Among them, PBEI55 containing equal weight of Bz and LCE has better comprehensive performance. Its thermal conductivity, glass transition temperature, and the 5 % weight loss temperature are 0.28 W m^?1 K^?1, 160 °C, and 339 °C, respectively. By introducing boron nitride (BN) fillers into PBEI55, a composite of PBEI/BN with the highest thermal conductivity of 3.00 W m^?1 K^?1 is obtained. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1813–1821     

Synthesis and characterization of a fluorinated polyanhydride

A fluorinated aromatic polyanhydride ( B ) was synthesized from the melt condensation of mixed anhydrides of 4,4′‐(hexafluoroisopropylidene)bis benzoic acid. Although the mixed anhydride from acetic anhydride yielded only a mixture of oligomers (weight‐average molecular weight < 2000), higher weight‐average molecular weight materials in the range of 15,000–18,000 were obtained with trifluoroacetic anhydride. Polymer B was soluble in chloroform and tetrahydrofuran, had a relatively high glass‐transition temperature of 176 °C with no melting point detected to 310 °C, and showed excellent thermal stability (5% weight loss observed at 380 °C by thermogravimetric analysis). The hydrolytic degradation of the fluorinated polyanhydride in a 0.1 M phosphate buffer of pH 7.4 at 37 °C was initially zero‐order, with 35% degradation occurring in 10 days. Loss of film integrity following that led to accelerated degradation, and almost complete dissolution was observed by the 16th day. The stability of the fluorinated polyanhydride in the solid state and in the solvent tetrahydrofuran was also evaluated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3027–3036, 2002     

Dielectric relaxation studies on a three component fully aromatic copolyester

The family of aromatic copolyesters based on the hydroxybenzoic acid (HBA) unit has been studied extensively by a number of groups. In particular the copolyesters of HBA and 2,6‐hydroxynaphthoic acid (HNA) have received much of attention due to their superior physical properties. This paper, however, describes some detailed dielectric studies on a related fully aromatic copolyester, poly(p‐oxybenzoate‐co‐p‐phenylene isophthalate), known simply as HIQ. This polymer is of particular interest because it can be solvent cast in an amorphous form, with no apparent crystallinity or frozen liquid crystalline texture and subsequently annealed, to increase the amount of crystalline and frozen liquid crystalline material. Dielectric measurements were therefore made on tape and film samples with differing morphologies produced by different processing histories. Measurements were made from 1 Hz to 10 kHz over the temperature range ?100 °C to 150 °C. A low temperature γ relaxation is observed which appears to be similar in nature to that which is observed in copolymers of HBA and HNA. An intermediate temperature β process is seen in isotropic samples which has a much higher activation energy than that found in HBA/HNA polyesters for example. The intensity of this process, which is not seen in mechanical measurements on highly oriented samples, increases on annealing and it is therefore suggested that the process is the glass transition of the liquid crystalline phase, though why the process is not seen in mechanical measurements on oriented samples is unclear. Copyright © 2001 John Wiley & Sons, Ltd.     

New liquid crystalline di- and tetra-acrylates for network formation

New liquid crystalline diacrylates and tetra-acrylates containing four to six aromatic rings were synthesized and characterized, and their mesophase behaviour was investigated. They are designed to be used in combination with chiral molecules to form cholesteric mesophases which can be crosslinked by photopolymerization. The acrylates presented exhibit broad mesophase ranges since mesogenic moieties longer than three are employed. Most diacrylates show no isotropization, due to premature thermal polymerization above 180°C. Additionally, liquid crystalline dipropionates were synthesized as reference compounds which cannot be crosslinked, and selected examples of these exhibit isotropization temperatures as high as 238°C prior to thermal degradation. Substituents at the mesogenic moiety have a great influence on the mesophase characteristics. Bulky substituents such as the tert-butyl group, induce a nematic mesophase, whereas compounds with small substituents (e.g. OCH3) or unsubstituted molecules also exhibit smectic phases. Tetra-acrylates with unsubstituted and substituted mesogenic units feature nematic mesophases only as a result of the additional spacers attached. Here isotropization was observed without polymerization at temperatures around 120-160°C.     

UV-VIS- und Raman-spektroskopische Untersuchungen der grünen Lösungen von Stickstofftriiodid-1-Pyridin in Pyridin

UV-VIS-Spectroscopical Investigations of the Green Solutions of Nitrogen Triiodide-1-Pyridine in Pyridine Solid, crystalline nitrogen triiodide-1-pyridine has a polymeric structure similar to that of nitrogen triiodide-1-ammonia consisting of NI₄ tetrahedra linked to chains by common vertices. The solubility of both compounds in liquid ammonia is accomplished by a degradation of the chains involving protolysis equilibria with monoiodamine. UV-VIS-spectra of the green solutions of NI₃ pyridine in the aprotic solvent pyridine between ?30 and ?16°C and Raman-spectra of these solutions at ?30°C or quenched with liquid nitrogen at ?196°C show, that the chains are retained here at least to some extent. The solutions are instable even at low temperatures and decompose in a first order reaction yielding nitrogen and iodine. The halflife period at ?16°C is 5 hours, at ?30°C 20 hours.     

Flexible transparent fluorinated nanohybrid with innovative heat‐resistance property—new technology proposal for fabrication of transparent materials using “crystalline” polymer

A new technology for the production of transparent material, using a “crystalline” polymer, is proposed in this study. In addition, a heat‐resistant transparent flexible plastic film with a high hydrophobic surface and a thermal decomposition temperature near 400 °C was created. Partially fluorinated crystalline polymer with switchboard‐type lamellae results high transparency as a consequence of the formation of a high‐density amorphous structure based on high‐temperature drawing just below the melting point at 250 °C. Melt‐compounding with montmorillonite modified by the long‐chain quaternary phosphonium with high coverage induces formation of a nanohybrid that retains transparency and also results in an increase in the thermal degradation temperature by over 50 °C. Through this technology, which results in heat‐resistance, transparency, and flexibility, the nano‐micro‐millimeter structures of solid‐state polymers are hierarchically controlled, which enables the creation of new materials. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1674–1690     

Main‐chain viologen polymers with organic counterions exhibiting thermotropic liquid‐crystalline and fluorescent properties*

A series of viologen polymers with bromide, tosylate, and triflimide as counterions were prepared by either the Menshutkin reaction or metathesis reaction in a common organic solvent. Their polyelectrolyte behavior in methanol was determined by solution viscosity measurements, and their chemical structures were determined by Fourier transform infrared and Fourier transform NMR spectroscopy. They were characterized for their thermotropic liquid‐crystalline properties with a number of experimental techniques. Each of the viologen polymers with organic counterions had a low melting transition or fusion temperature above which it formed either a high‐order smectic phase or a low‐order smectic phase. Each of them also exhibited a smectic‐to‐isotropic transition. The ranges of the liquid‐crystalline phase were 80–88 °C for viologen polymers with tosylate as a counterion and 120–146 °C for viologen polymers with triflimide as a counterion. They had excellent thermal stability. The ranges of thermal stability were 288–329 °C for viologen polymers with tosylate as a counterion and 343–350 °C for viologen polymers with triflimide as a counterion. The fluorescence property for all of the viologen polymers in either aqueous or methanol solution was also included in this study. For example, the viologen polymer containing the 4,4′‐bipyridinium and p‐xylyl units along the backbone of the polymer chain with triflimide as a counterion had an absorption spectrum (λ_max = 265 nm), an excitation spectrum (λ_ex values = 357, 443, and 454 with monitoring at 533 nm), and an emission spectrum (λ_em = 536 nm with excitation at 430 and 450 nm) in methanol. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 659–674, 2002; DOI 10.1002/pola.10134     

Synthesis and properties of novel phosphorus‐containing thermotropic liquid crystalline copoly(ester imide)s

A series of novel phosphorus‐containing polyesterimides were prepared from diols—a mixture of a new aromatic phosphorus‐containing bisphenol, namely 1,4‐bis[N‐(4‐hydroxyphenyl)phthalimidyl‐5‐carboxylate]‐2‐(6‐oxido‐6H‐dibenz<c,e><1,2>oxaphosphorin‐6‐yl)‐naphtalene, with aliphatic diols such as 1,3‐propanediol, 1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, and 1,12‐dodecanediol—and an aromatic diacid chloride containing two preformed ester groups, namely terephthaloyl‐bis‐(4‐oxibenzoyl‐chloride), via high‐temperature polycondensation in o‐dichlorobenzene. The structures of monomers and polymers were verified by means of Fourier transform infrared (FTIR) spectroscopy and ¹H NMR spectroscopy. The molar ratio of aromatic bisphenol to aliphatic diol was varied to generate a series of copolyesterimides with tailored physicochemical properties, structure–properties relationships being established. The effect of the phosphorus content on the thermal properties and the flame retardancy was evaluated by means of thermogravimetric analysis (TGA), TGA–FTIR, and scanning electron microscopy. The polymers were stable up to 340 °C showing a 5% weight loss in the range of 340–395 °C and a 10% weight loss in the range of 370–415 °C. The char yields at 700 °C were in the range of 13.6–38% increasing with the content of phosphorus‐containing bisphenol. The effect of the aliphatic content on the liquid crystalline behavior was investigated by polarized light microscopy, differential scanning calorimetry, and X‐ray diffraction. The transition temperatures from crystal to liquid crystalline melt were in the range of 209–308 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Photoinduced alignment of polymerisable liquid crystals on photoreactive polymers containing 2,6-bis(benzylidene)-1-cyclohexanone units in the main chain

Photoreactive polymers containing 2,6-bis(benzylidene)-1-cyclohexanone (bisBC) units were synthesised and investigated as a photoalignment layer for polymerisable liquid crystals (PLCs) and liquid crystalline polymers (LCPs). The liquid crystalline materials were aligned homogeneously on the photoalignment layers in a wide range of irradiation dose of linearly polarised UV light (LPUVL). Specifically, for the photoalignment layer baked at 80°C, order parameters of the liquid crystalline materials were low due to the disturbance of oriented-photoreactive polymer caused by the contact with the solvent of liquid crystalline materials. However, the liquid crystalline materials were aligned homogeneously even at low irradiation doses on the thermally cured photoalignment layer baked at 180°C. In addition, the liquid crystalline materials were aligned perpendicular to the LPUVL electric field. The alignment mechanism is discussed by comparing the retardation of photoalignment layer with anisotropic polarisabilities of model molecules calculated by density functional theory (DFT). It is suggested that the liquid crystalline materials aligned along the unreacted chromophores in the photoreactive polymer.     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.     

Folding and Imaging of DNA Nanostructures in Anhydrous and Hydrated Deep‐Eutectic Solvents

There is great interest in DNA nanotechnology, but its use has been limited to aqueous or substantially hydrated media. The first assembly of a DNA nanostructure in a water‐free solvent, namely a low‐volatility biocompatible deep‐eutectic solvent composed of a 4:1 mixture of glycerol and choline chloride (glycholine), is now described. Glycholine allows for the folding of a two‐dimensional DNA origami at 20 °C in six days, whereas in hydrated glycholine, folding is accelerated (≤3 h). Moreover, a three‐dimensional DNA origami and a DNA tail system can be folded in hydrated glycholine under isothermal conditions. Glycholine apparently reduces the kinetic traps encountered during folding in aqueous solvent. Furthermore, folded structures can be transferred between aqueous solvent and glycholine. It is anticipated that glycholine and similar solvents will allow for the creation of functional DNA structures of greater complexity by providing a milieu with tunable properties that can be optimized for a range of applications and nanostructures.     

Engineered Anisotropic Fluids of Rare‐Earth Nanomaterials

The self‐assembly of inorganic nanoparticles into well‐ordered structures in the absence of solvents is generally hindered by van der Waals forces, leading to random aggregates between them. To address the problem, we functionalized rigid rare‐earth (RE) nanoparticles with a layer of flexible polymers by electrostatic complexation. Consequently, an ordered and solvent‐free liquid crystal (LC) state of RE nanoparticles was realized. The RE nanomaterials including nanospheres, nanorods, nanodiscs, microprisms, and nanowires all show a typical nematic LC phase with one‐dimensional orientational order, while their microstructures strongly depend on the particles’ shape and size. Interestingly, the solvent‐free thermotropic LCs possess an extremely wide temperature range from ?40 °C to 200 °C. The intrinsic ordering and fluidity endow anisotropic luminescence properties in the system of shearing‐aligned RE LCs, offering potential applications in anisotropic optical micro‐devices.     

Synthesis,characterization, and in vitro degradation of liquid‐crystalline terpolyesters of 4‐hydroxyphenylacetic acid/3‐(4‐hydroxyphenyl)propionic acid with terephthalic acid and 2,6‐naphthalene diol

Melt‐processable liquid‐crystalline terpolyesters of 4‐hydroxyphenylacetic acid (HPAA) and 3‐(4‐hydroxyphenyl)propionic acid (HPPA) with terephthalic acid and 2,6‐naphthalene diol were synthesized by one‐step acidolysis melt polycondensation followed by postpolymerization and were characterized with viscosity studies, Fourier transform infrared (FTIR) and NMR spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarized light microscopy, and wide‐angle X‐ray diffraction. The melting behaviors and liquid‐crystalline transition temperatures of the terpolyesters were dependent on the composition of the HPAA/HPPA content. The transition temperatures of the polyesters could be effectively reduced by the introduction of an even number of built‐in short methylene spacers in combination with the 2,6‐naphthalene offset structure. A terpolyester with an HPPA content of 33% (NTP33) showed optimum properties for the glass‐transition temperature, around 71 °C, and the melting temperature, near 240 °C, with a Schlieren nematic texture. The polymer showed excellent flow behavior in a Brabender plasticorder. It was also thermally stable up to 400 °C. NTP33 showed 2.5% in vitro hydrolytic degradation in buffer solutions of pH 10 at 60 °C after 540 h. Considerable enzymatic degradation was also observed with porcine pancreas lipase/buffer solutions in comparison with Candida rugosa lipase after 60 days. The degradation was also followed with FTIR, DSC, and TGA. Apart from the temperature and pH of the buffer solution, several structural parameters, such as the aromatic content, crystallinity percentage, and composition of the polymer, affected the degradation behavior. FTIR studies indicated the involvement of chain scission during degradation. Scanning electron microscopy studies further showed that surface erosion also played a major role in the degradation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1845–1857, 2002     

Near‐surface structure formation in chemically imidized polyimide films

Free‐standing polyimide films are manufactured by the chemical imidization of linear, soluble polymeric precursors. The reactive solution is coated onto a heated substrate, peeled off after partial imidization, and then dried and cured as a free‐standing film. Adhesive bonds to the cast side of the final film more strongly than to the air side. Near‐surface elastic moduli of film samples were measured with a nanoindentation setup. Samples were annealed at different final temperatures. The air side of the samples annealed at 400 °C had a higher modulus of 1.4 GPa than the 0.8 GPa of the casting side. This difference diminished as the annealing temperature was raised to 460 °C. Polyamic acid and polyimide exhibit phase transitions from disordered, isotropic solutions to ordered, liquid‐crystalline states. A theoretical model of drying and curing demonstrates formation of a gradient in conversion and ordering: the air side vitrifies at a lower solvent content, lower conversion, and higher ordering; the casting side, at a greater solvent content, higher conversion, and less ordering. Subsequent high‐temperature drying and curing of the free‐standing films removes solvent, completes reaction, and nematically orders both sides. However, longer times and higher temperature annealing are needed to bring the two sides to their common equilibrium state of nematic order. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1824–1838, 2001     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4′‐bis(1,10‐sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4′‐biphenyldiol. 4,4′‐Bis(1,10‐sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀‐LCP, which implies that the introduction of an ionic group did not change the texture of the B₀‐LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N‐dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Polydimethylsiloxane–cristobalite composite adhesive system for aerospace applications

The effect of phase‐pure cristobalite (a high temperature crystalline polymorph of silica) on the adhesive characteristics of hydroxyl terminated polydimethylsiloxane (PDMS) was studied. The potential advantages of PDMS/cristobalite composite system as an adhesive for aerospace applications are also discussed. A PDMS/cristobalite composite adhesive system containing different filler contents (0–46 volume percentage, vol%) was prepared. The filler material, phase‐pure cristobalite, was synthesized by the pyrolysis of fused silica at 1400°C. The mechanical, rheological, and thermal characteristics of the composites were studied. A high yield stress (0.151 Pa), shear‐thinning index (1.051), and fast recovery rate were observed for ～34 vol% cristobalite loading, which indicate that PDMS retains its excellent adhesive and flow characteristics even at high filler loading with enhanced mechanical characteristics. Thermal analysis shows the onset of degradation of PDMS shifts to higher temperatures, 372–438°C and 317–417°C in nitrogen and air atmosphere respectively, which shows excellent thermal stability. The residual component yields after thermal degradation of PDMS/cristobalite composite system in nitrogen and air atmosphere show different degradation mechanisms. Copyright © 2008 John Wiley & Sons, Ltd.     

Melt‐processable poly(oxyphenylalkanoate): Synthesis,properties, and in vitro degradation of poly(4‐oxyphenylacetate)

The homopolyester of 4‐hydroxyphenylacetic acid (HPAA) was synthesized by one‐pot, slurry‐melt, and acidolysis melt polymerization techniques and was characterized by its inherent viscosity and IR and NMR spectra. Differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) studies of the homopolymer were carried out for its thermal and phase behavior. The results indicated that the yield and molecular weight of the polymer depended on the method of preparation; moreover, the acidolysis melt polymerization of the pure acetoxy derivative of HPAA was the best method for the preparation of high molecular weight poly(4‐oxyphenylacetate) (polyHPAA) without side reactions. DSC and PLM studies also showed that the thermal and optical properties depended largely on the polymerization conditions and inherent viscosity values. PolyHPAA did not show a clear texture typical of liquid‐crystalline polymers, whereas after cooling from the melt, structures similar to spherulitic crystals were observed. WAXD patterns showed a crystalline nature. The in vitro degradability of the polymer was also studied via the water absorption in buffer solutions of pH 7 and 10 at 30 and 60 °C; this was followed by Fourier transform infrared, inherent viscosity, DSC, thermogravimetric analysis, WAXD, and scanning electron microscopy techniques. Unlike Vectra®, which showed no degradation, polyHPAA showed an increase in hydrolytic degradation from 5.0 and 6.0% at 30 °C to 12.5 and 15.0% at 60 °C after 350 h in buffer solutions of pH 7 and 10, respectively. The results indicated a possible biomedical prosthetic application of poly(oxyphenylalkanoate)s such as polyHPAA with better crystallinity coupled with degradability as a substitute for poly(hydroxyalkanoates). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2430–2443, 2001     

Temperature‐dependent self‐assembly and rheological behavior of a thermoreversible pmma–PnBA–PMMA triblock copolymer gel

Self‐assembly and mechanical properties of triblock copolymers in a mid‐block selective solvent are of interest in many applications. Herein, we report physical assembly of an ABA triblock copolymer, [PMMA–Pn BA–PMMA] in two different mid‐block selective solvents, n‐butanol and 2‐ethyl‐1‐hexanol. Gel formation resulting from end‐block associations and the corresponding changes in mechanical properties have been investigated over a temperature range of ?80 °C to 60 °C, from near the solvent melting points to above the gelation temperature. Shear‐rheometry, thermal analysis, and small‐angle neutron scattering data reveal formation and transition of structure in these systems from a liquid state to a gel state to a percolated cluster network with decrease in temperature. The aggregated PMMA end‐blocks display a glass transition temperature. Our results provide new understanding into the structural changes of a self‐assembled triblock copolymer gel over a large length scale and wide temperature range. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 877–887