Au core-PtAu alloy shell nanowires for formic acid electrolysis

Inefficient electrocatalysts and high-power consumption are two thorny problems for electrochemical hydrogen(H2)production from acidic water electrolysis.Herein we report the one-pot precise synthesis of ultrafine Au core-Pt Au alloy shell nanowires(Au@PtxAu UFNWs).Among them,Au@Pt_0.077 Au UFNWs exhibit the best performance for formic acid oxidation reaction(FAOR)and hydrogen evolution reaction(HER),which only require applied potentials of 0.29 V and-22.6 m V to achieve a current density of 10 m A cm^-2,respectively.The corresponding formic acid electrolyzer realizes the electrochemical H2 production at a voltage of only 0.51 V with 10 m A cm^-2 current density.Density functional theory(DFT)calculations reveal that the Au-riched Pt Au alloy structure can facilitates the direct oxidation pathway of FAOR and consequently elevates the FAOR activity of Au@Pt_0.077 Au UFNWs.This work provides meaningful insights into the electrochemical H₂ production from both the construction of advanced bifunctional electrocatalysts and the replacement of OER.     

Layered Ag-graphene films synthesized by Gamma ray irradiation for stable lithium metal ano des in carb on ate-based electrolytes

Lithium metal batteries are considered as high energy density battery systems with very promising prospects and have bee n widely studied.However,The uncon trollable plating/strippi ng behavior,infinite volume change and den drites formation of lithium metal anode restrict the applicati on.The unc on trolled n ucleati on of lithium caused by the non uniform multi-physical field distributions,can lead to the undesirable lithium deposition.Herein,a graphene composite uniformly loaded with Ag nano-particles(Ag NPs)is prepared through a facile Gamma ray irradiation method and assembled into self-supported film with layered structure(Ag-rGO film).Whe n such film is used as a lithium metal an ode host,the uncontrolled deposition is converted into a highly nucleation-induced process.On one hand,the Ag NPs distributed between the in terlayers of graphe ne can preferentially induce lithium nu cleati on and en able uniform deposition morphology of lithium between interlayers.On the other hand,the stable layered graphene structure can accommodate volume change,stabilize the interface between anode and electrolyte and inhibit dendrites formation.Therefore,the layered Ag-rGO film as anode host can reach a high Coulombic efficiency over 93.3% for 200 cycle(786 h)at a current density of 1 mA cm^-2 for 2 mAh cm^-2 in carbonate-based electrolyte.This work proposes a facile Gamma ray irradiation method to prepare metal/3D-skeleton structure as lithium anode host and demonstrates the potential to regulate the lithium metal deposition behaviors via manipulating the distribution of lithiophilic metal(e.g.Ag)in 3D frameworks.This may offer a practicable thinking for the subsequent design of the lithium metal anode.     

中国纤维素乙醇技术的研究进展

中国面临着严重的能源短缺和环境污染问题,中国政府正在局部几个省份内政策性鼓励燃料乙醇生产和使用.尽管当前主要是用玉米和谷物作为生产乙醇的原料,然而中国具有大量潜在的低成本的纤维素生物质原料,可以极大地扩大乙醇的产量,降低原料成本.近20年来,由于技术的革命性进步,已使得纤维素乙醇的生产成本从4美元/加仑以上,降低至约1.2-1.5美元/加仑.其中,每吨生物质约44美元.因此,目前乙醇掺汽油具有十分强的市场竞争力.已有几个公司正在建造首批商业纤维素乙醇工厂,虽然这些刚起步的小型设施在合理利用和管理上风险较小,但规模经济需要较大型工厂.尽管配送生物质原料的成本会随需求的增加而增加,但在乙醇生产基础上的生物精炼技术的发展,尤其是化工产品和动力的协同生产,将会使全过程的经济可行性大大提高.进一步深入的基础研究,将解决低成本下实现纤维素的完全利用,以确保在无政策性补贴的前提下,真正使纤维素乙醇成为具有市场竞争力的低成本纯液体燃料.     

Binary ligand strategy toward interweaved encapsulation-nanotubes structured electrocatalyst for proton exchange membrane fuel cell

Hierarchically porous architecture of ir on-nitroge n-carb on(Fe-N-C)for oxyge n reducti on reaction(ORR)is highly desired towards efficient mass transfer in the fuel cell device manner.Herein,we reported a binary ligand strategy to prepare zeolitic imidazolate frameworks(ZIFs)-derived precursors,wherein the addition of secondary ligand endows precursors with the capabilities to transform into porously interweaved encapsulation-nanotubes structured composites after calcination.The optimal catalyst,i.e.,termed as Fe₆-M/C-3,exhibits excellent durability with 88.8%current retention after 50,000 seconds in 0.1 M HClO₄solution by virtue of nanoparticles-encapsulation features,which is more positive than the benchmark commercial 20 wt%Pt/C catalyst.Moreover,a promising maximum power density of Fe₆-M/C-3 as cathode catalyst was also dem on strated in proton exchange membrane fuel cells(PEMFCs)measurements.Therefore,this binary ligand approach to the fabrication of hierarchically porous structures would also have significant implications for various other electrochemical reactions.     

Molten salt as ultrastrong polar solvent enables the most straightforward pyrolysis towards highly efficient and stable single-atom electrocatalyst

Currently,pyrolysis as the most widely used method still has some key issues not well resolved for synthesis of carbon-supported single-atom catalysts(C-SACs),e.g.,the sintering of metal atoms at high temperature as well as the high cost and complicated preparations of precursors.In this report,molten salts are demonstrated to be marvellous medium for preparation of C-SACs by pyrolysis of small molecular precursors(ionic liquid).The ultrastrong polarity on one hand establishes robust interaction with precursor and enables better carbonization,resulting in largely enhanced yield.On the other hand,the aggregation of metal atoms is effectively refrained while no nanoparticle or cluster is formed.By this strategy,a C-SAC with atomically dispersed Fe-N₄ sites and a high specific area over 2000 m² g^-1 is obtained,which illustrates high ORR activity in both acid and alkaline media.Moreover,this SAC exhibits superior methanol tolerance and stability after acid soaking at 85℃ for 48 h.It is believed that the molten-salts-assisted pyrolysis can be developed into a routine strategy as it not only can largely simply the synthesis of C-SACs,but also can be extended to prepare other types of SACs.     

镧对Mg-Si合金中Mg2Si相变质的影响

研究了Mg-5Si合金中La的添加对初生Mg2Si相变质的影响。结果表明,适量的La能够有效地变质初生Mg2Si相。基于本文的研究,在添加约0.5%La时,获得了最佳的变质效果,此时,初生Mg2Si相的尺寸减小到25μm以下,其形态从粗大的树枝形状变为多面体形状。然而,当La增加到0.8%或者更高时,初生Mg2Si相又生长为粗大的树枝形态。而且,在凝固过程中发现形成了一些LaSi2化合物,这些化合物的数量随着La的增加而呈现逐渐增加的趋势。     

电感耦合等离子体质谱法测定天然水体中19种元素

建立STD/KED模式-电感耦合等离子体质谱（ICP-MS）法同时测定天然水体中铍、硼、钛、钒、铬、锰、钴、镍、铜、锌、钼、镉、锑、钡、铊、铅、铁、砷和硒19种元素的分析方法。仪器调谐校准后,样品在线加入锂、钪、铑、铋校准溶液校正,以标准曲线内标法定量分析。标准曲线相关系数均大于0.999,样品加标回收率为92.6%～103.6%,质控样品测定值相对标准偏差为0.20%～2.6%(n=6),方法检出限为0.01～0.70μg/L。该方法灵敏度高,操作简便,节省人力,能满足天然水体中19种元素的同时检测需要。     

电解质-非电解质混合溶液活度系数的关联及溶解的推算 II:NH3-NaCl-Na2SO4-H2O体系的液固平衡热力学

由于在研究的体系中, Na2SO4是非对称电解质, 且能生成水合盐, 故推导了由非对称型电解质与非电解质所构成的混合溶液的各组分的活度系数关联通式, 并在此基础上讨论了水合盐液固平衡的计算方法.     

黄花棘豆化学成分的研究II:两种三萜皂苷的结构

从黄花棘豆的总皂苷中分离出两个新皂苷1和2.经光谱分析及化学方法确证,1为3-O-[α-L-鼠李吡喃糖基(1→2)-β-D-葡萄吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B;2为3-O-[α-L-鼠李吡喃糖基(1→2)-α-L-阿拉伯吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B.     

二氧化钛纳米管的研究进展

二氧化钛纳米管由于其新奇的光电、催化、气敏等性能引起了广泛的关注,在太阳能电池、光催化、环境净化、气体传感器等领域有潜在的应用价值.本文概述了近年来在制备方法、反应机理和组成、晶型和形貌及掺杂和应用方面的进展,并讨论了今后可能的研究发展方向.     

Solid-state structures of sym-dibenzo-16-crown-5 and its derivatives

Solid-state structures of sym-dibenzo-16-crown-5 (1) and five derivatives with one or two substituents on the three-carbon bridge have been determined. The derivatives with three sp³-hybridized carbons include sym-(propyl)dibenzo-16-crown-5 (4), sym-(pentafluorophenoxy)-dibenzo-16-crown-5 (5), and sym-[di(methoxymethyl)]dibenzo-16-crown-5 (6). Structures of two derivatives with sp²-hybridization of the central carbon (7 and 8) were also determined. Twisting of the three-carbon bridge causes one of the terminal methylene groups to be oriented within the polyether cavity.     

Threaded structures based on the recognition of 1,5-dinaphtho-crown ethers to paraquat and vinylogous viologen derivatives: host–guest complexations,X-ray crystal structures,and self-assembly superstructures

Host–guest complexation between two 1,5-dinaphtho-crown ethers and two paraquat derivatives has been studied. By self-assembly of 1,5-dinaphtho-44-crown-12 (DNP44C12) 1 with vinylogous viologen 4, a linear [2]pseudorotaxane array forms in the solid state by PF₆⁻ anion linkages. Moreover, the complexation between 1,5-dinaphtho-50-crown-14 (DNP50C14) 2 and paraquat 3 also leads to the formation of a linear [2]pseudorotaxane superstructure in the solid state driven by π–π stacking.     

Synthesis and pharmacological evaluation of 5-[2′-(1H-tetrazol-5-yl)-biphenyl-4-ylmethyl]-4,5,6,7-tetrahydro-thieno[3,2-c]pyridine derivatives as platelet aggregation inhibitors

One pot synthesis and characterization of new 5-[2′-(1H-tetrazol-5-yl)-biphenyl-4-ylmethyl]-4,5,6,7-tetrahydro-thieno[3,2-c]pyridines (3a–k) using amides (2a–k) were reported. The prepared 5-[2′-(1H-tetrazol-5-yl)-biphenyl-4-ylmethyl]-4,5,6,7-tetrahydro-thieno[3,2-c]pyridine (3a) is a bioisostere of 4′-(6,7-dihydro-4H-thieno [3,2-c]pyridin-5-ylmethyl)-biphenyl-2-carboxylic acid (1), having good in vivo antithrombotic activity compared with Clopidogrel. The new tetrazole derivatives (3a–k) were screened for their in vitro activity as platelet aggregation inhibitors.     

Nitroxydes—LXIII : Oxydation de nitroxydes isoquinuclidiniques par l'oxyde d'argent humide. Preparation de nitroxydes aza-6 bicyclo[3.2.1]octeniques

Moist silver oxide oxidation of three isoquinuclidinic nitroxide ketones is described. 1,3,3-Trimethyl-2-azabicyclo[2.2.2]octane-5-one-2-oxyl 3, and 1,3,3,7-anti-tetramethyl-2-azabicyclo[2.2.2]octane-5-one-2-oxyl 4 lead to 6-aza-bicyclo[3.2.1]oct-3-ene-2-one-7-oxyl derivatives 6, 7, and 1,3,3,7-syn-tetramethyl-2-aza-bicyclo[2,2.2]octane-5-one-2-oxyl 5 to 8-substituted p-menthenones.     

Synthesis of a novel calix[4]azacrown ionophore and its extraction ability toward Cr(VI)

The present study describes the synthesis of a novel extractant p-tert-butyl-calix[4]azacrown ionophore (5) and evaluation of its extraction capability toward dichromate ion from aqueous solution. At first, p-tert-butyl-calix[4]azacrown ionophore (5) has been synthesized from the condensation of p-tert-butyl-calix[4]arene diamine (3) with N-(4-formylphenyl)-aza-15-crown-5 (4). The studies regarding the removal of dichromate ion from the aqueous solutions have been carried out in the liquid–liquid extraction systems. The extraction results showed that p-tert-butyl-calix[4]azacrown derivative (5) exhibited generally higher affinity towards dichromate ion than both 3 and 4 at all studied pHs.     

Synthesis of a new series of pyridine and fused pyridine derivatives

The reaction of 4-methyl-2-phenyl-1,2-dihydro-6-oxo-5-pyridine- carbonitrile (1) with arylidene malononitrile afforded isoquinoline derivatives 2a,b. 6-Chloro-4-methyl-2-phenyl-5-pyridinecarbonitile (3) obtained by chlorination of compound 1 with phosphoryl chloride was converted into 6-amino-4-methyl-2-phenyl-5-pyridinecarbonitrile (4) and 6-hydrazido-4-methyl-2-phenyl-5-pyridinecarbonitrile (5) in good yield, through reactions with ammonium acetate and hydrazine hydrate, respectively. Treatment of 4 with ethyl acetoacetate, acetic anhydride, formic acid, urea and thiourea gave the corresponding pyrido [2,3-d] pyrimidine derivatives 7-10a,b. A new series of 6-substituted-4-methyl-2-phenyl-5-pyridine carbonitriles 11-13 has been synthesized via reaction of 4 with phenyl isothiocyanate, benzenesulphonyl chloride and acetic anhydride. Treatment of 4 with malononitrile gave 1,8-naphthyridine derivative 14. The reactivity of hydrazide 5 towards acetic acid, phenylisothiocyanate and methylacrylate to give pyrazolo-[3,4-b]-pyridine derivatives 15-17 was studied. Treatment of 5 with acetic anhydride, phthalic anhydride and carbon disulphide gave pyridine derivatives 18,19 and 1,2,4-triazolo-[3,4-a]-pyridine derivative 20.     

Specific solvent effects on the intramolecular electron transfer reaction in a neutral ferrocene donor polychlorotriphenylmethyl acceptor radical with extended conjugation

The synthesis and the optical, magnetic and electrochemical properties of the ferrocenylbutynene substituted polychlorotriphenylmethyl radical 1 are reported. Radical 1 is prepared in a three step synthetic route starting with a Wittig reaction to yield (E,Z)-{4-[4-(bis(2,3,4,5,6-pentachlorophenyl)methyl)-2,3,5,6-tetra-chlorophenyl]but-3-en-1-ynyl}-ferrocene (1H) which is subsequently deprotonated to yield the corresponding anion K⁺(18-crown-6) [1]^? and finally oxidized to (E)-4-[4-(ferrocenyl)but-3-yn-1-enyl]-2,3,5,6-tetrachlorophenyl-bis(2,3,4,5,6-pentachlorophenyl) methyl radical (1). Radical 1 exhibits a charge-transfer band transition in the near infrared region which is associated with an intramolecular electron transfer from the ferrocene unit (donor) to the radical unit (acceptor) of this dyad molecule; its solvatochromism is studied in detail. The X-ray crystal structure of [K⁺(18-crown-6)](E)-[4-[4-(ferrocenyl)but-3-yn-1-enyl]-2,3,5,6-tetrachlorophenyl-bis(2,3,4,5,6-pentachlorophenyl) methide] [1]^? has been determined. This organic salt forms an interesting one-dimensional coordination polymer by the coordination of the K⁺ cation with chlorine atoms of the organic carbanion.     

Synthesis and electrochemical properties of crown ether functionalized coumarin substituted cobalt and copper phthalocyanines

The synthesis of novel 6,7-[15-crown-5]-3-[p-(3,4-dicyanophenoxy)phenyl]coumarin (1)/6,7-[15-crown-5]-3-[p-(2,3-dicyanophenoxy)phenyl]coumarin (2) and their peripherally/non-peripherally cobalt and copper phthalocyanine complexes (3-6) have been prepared and characterized by elementel analysis, ¹H-NMR, MALDI-TOF, FT-IR and UV-Vis spectral data. Fluorescence intensity changes of compound 1 and 2 have been determined by addition of Na⁺ or K⁺ ions at 25 °C in THF. The effect of substitution type on the redox and aggregation behaviour of the compounds was investigated by voltammetry and in situ spectroelectrochemistry.     

Lutetium gets a crown: Synthesis, structure and reaction chemistry of the separated ion pair complex, [Li(12-crown-4)2][(C5Me5)2LuMe2]

Reaction of (C₅Me₅)₂Lu(Me)(μ-Me)Li(THF)₃ (2) with excess 12-crown-4 affords the new separated ion pair complex, [Li(12-crown-4)₂][(C₅Me₅)₂LuMe₂] (3), in excellent yield. This complex reacts with 2,6-diisopropylaniline and phenylacetylene to give the methyl amide complex [Li(12-crown-4)₂][(C₅Me₅)₂Lu(Me)(NH-2,6-ⁱPr₂C₆H₃)] (4) and the bis(acetylide) complex [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5), respectively. Attempts to promote methane loss from complexes 3 and 4 to generate a lutetium methylidene or imido complex, respectively, were unsuccessful. The ability of the bis(acetylide) complex 5 to act as a π-tweezer complex was also explored. Reaction between [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5) and CuSPh gave only intractable lutetium products and the copper(I) species [Li(12-crown-4)₂][Cu(C≡C-Ph)₂] (8). The new lutetium complexes have been characterized by elemental analysis and NMR spectroscopy. Finally, the X-ray crystal structures of (C₅Me₅)₂Lu(Me)(μ-Me)Li(THF)₃ (2), [Li(12-crown-4)₂][(C₅Me₅)₂LuMe₂] (3), [Li(12-crown-4)₂][(C₅Me₅)₂Lu(Me)(NH-2,6-ⁱPr₂C₆H₃)] (4), [Li(12-crown-4)₂][(C₅Me₅)₂Lu(C≡C-Ph)₂] (5), and [Li(12-crown-4)₂][Cu(C≡C-Ph)₂] (8) are also reported.     

Complexation of diquat by disubstituted dibenzo-30-crown-10 derivatives

X-Ray structural investigations of the 1:1 crystalline complexes formed between [Diquat][PF₆]₂ and (i) the bisformyl dibenzo-30-crown-10 derivative 2 and (ii) the dimethyl dibenzo-30-crown-10 derivative 4 reveal that in both cases, charge transfer, as well as electrostatic binding and weak [C—···O] hydrogen bonding combine to give the cortlexes their remarkable stabilities; in acetone solution, the stability constants for the 1:1 complexes involving 2, 3, and 4 are 2100, 50000, and 48000 M^-1, respectively.