Stereoselective tribromomethylation of N-(tert-butanesulfinyl)imines with bromoform: practical synthesis of α-tribromomethyl amines

The unprecedented nucleophilic tribromomethylation of N-(tert-butanesulfinyl)imines with bromoform has been shown to be a highly stereoselective and practical method for the synthesis of enantiomerically pure α-tribromomethyl amines. THF has proven to be the best solvent in this addition reaction. By changing the reaction solvent from THF to DMF, 2,2-dibromoaziridines can also be synthesized directly from bromoform and N-(tert-butanesulfinyl)imines under similar reaction conditions.     

Metal-free N-iodosuccinimide-catalyzed mild oxidative C-H bond amination of benzoxazoles

A facile, efficient, and mild protocol for the synthesis of aminobenzoxazoles has been developed using direct oxidative C-H bond amination of benzoxazoles with secondary or primary amines. The reaction was performed using catalytic amount of N-iodosuccinimide and aqueous hydrogen peroxide as a green oxidant and in the absence of transition metals. Reaction proceeds smoothly at ambient temperature and requires shorter reaction time to furnish excellent yield of the desired products. Various cyclic, acyclic, and functionalized aliphatic amines were well tolerated under optimized reaction conditions and provided good to excellent yield of the respective aminobenzoxazoles.     

A convenient synthesis of some α-oxoketene-N,S- and N,N-acetals

Some α-oxoketene-N,S- and N,N-acetals were selectively synthesized in good to excellent yields by the reaction of 1,1-dimethoxy-4,4-di(methylthio)-3-buten-2-one with primary and secondary amines under moderate conditions. Secondary amines in reaction with α-oxoketene dithioacetal yielded double-substitution products exclusively, whereas primary amines under the same conditions yielded the mono-substituted products as exclusive or main products.     

Carbamoylimidazolium salts as diversification reagents: an application to the synthesis of tertiary amides from carboxylic acids

An efficient method for the preparation of tertiary amides from carbamoylimidazolium salts and carboxylic acids is described. The transformation occurs at room temperature and under relatively mild conditions. The carbamoylimidazolium salts are obtained from the reaction of secondary amines with N,N′-carbonyldiimidazole, followed by methylation with methyl iodide. The utility of this reaction was demonstrated in the formation of Weinreb amides and in a short synthesis of fused bicyclic amides. The introduction of this reaction now permits carbamoylimidazolium salts to be utilized in the formation of tertiary amides, ureas, carbamates and thiocarbamates under a single set of conditions.     

Transition metal-free amination of aryl halides—A simple and reliable method for the efficient and high-yielding synthesis of N-arylated amines

A simple and reliable reaction protocol for the clean, fast, and high-yielding synthesis of various N-arylated amines derived from reactions of aryl halides with various (also sterically hindered) amines under transition metal-free reaction conditions is presented. Dioxane and KN(Si(CH₃)₃)₂ were found to be the ideal solvent and base for this transformation. The conversion rates and yields observed are excellent and in the majority of the reactions performed significantly higher than that obtained in their catalyzed versions. Furthermore, the selective synthesis of 6-halopyridin-2-amines and asymmetric pyridine-2,6-diamines (derived from consecutive reactions of 2,6-dibromopyridine and 2,6-dichloropyridine, respectively, with different amines) is possible in almost quantitative yields (relative to 2,6-dihalopyridine) within very short reaction times. Purification of the 6-halopyridin-2-amine intermediates is not necessary, allowing the synthesis of pyridine-2,6-diamines in ‘one-pot’. However, catalysts are in many cases not required to efficiently and selectively couple aryl halides with amines, making transition metal-free versions of the Buchwald-Hartwig reaction extremely attractive for the synthesis of N-arylated amines with substrates containing substituents on the aryl halide, which either promote regioselectivity and/or do not require regioselective aminations.     

Chelatbildende Enaminoketone I. Synthese von unsymmetrischen Liganden

Syntheses of chelating enaminoketones for a potential use in enrichment or recovery of metals from their aqueous solutions are described. Tridentate ligands were prepared either from aromatic amines, triethoxymethane and cyclic 1,3-dicarbonyl compounds in a one-step synthesis, or from the anilinomethylene compounds obtained by this approach and aliphatic amines. Polymerizable ligands have also been synthesized by reaction with (meth)acryloyl chloride and copolymerized with styrene to yield a chelating polymer.

     

Microwave assisted,sequential two-step,one-pot synthesis of novel imidazo[1,2-a]pyrimidine containing tri/tetrasubstituted imidazole derivatives

A series of novel imidazo[1,2- a ]pyrimidine containing tri/tetrasubstituted imidazole derivatives (1-10) has been synthesized via sequential two-step, one-pot, multicomponent reaction using imidazo[1,2- a ]pyrimidine-2-carbaldehyde, benzil, primary amines, and ammonium acetate catalyzed by p -toluenesulfonic acid under microwave-assisted conditions. The results showed that target compounds can be obtained from a wide range of primary amines bearing different functional groups with moderate to good yields (46%-80%) under optimum reaction conditions. This method provides a green protocol for imidazo[1,2- a ]pyrimidine containing tri/tetrasubstituted imidazole derivatives due to ethyl alcohol as a green solvent, microwave irradiation as a greener heating method and one-pot multicomponent reaction as a green technique. The synthesized compounds have been elucidated using various spectroscopic tools such as FT-IR, ¹H NMR, ¹³ C NMR, and MS.     

Gallium(III) triflate-catalyzed one-pot selective synthesis of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones

A series of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones have been synthesized in good to excellent yields and high selectivity by one-pot reaction using isatoic anhydride, ammonium acetate (or amines), and aldehydes in ethanol or in DMSO under mild conditions, respectively. The reaction was efficiently promoted by 1 mol % Ga(OTf)₃ and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.     

(NH 4 )Zn 2 (PO 4 )(HPO 4 ): Hydrothermal Synthesis and Reaction with n-Alkylamine Vapours

(NH₄)Zn₂(PO₄)(HPO₄) was synthesized under mild hydrothermal conditions in the presence of urea. The reaction with n-alkylamines has been investigated by exposing the solid to amines vapor. The new materials were characterized by chemical and thermal analysis, powder X-ray diffraction, and IR spectroscopy. In addition, the simultaneous reaction of this compound with two or more n-alkylamine different molecules was investigated. The reaction of large n-alkylamine molecules was observed to be faster if there is a shorter alkyl chain amine acting as a catalyst, yielding on completion single amine materials. In the case of a vapor mixture of several amines, the compound obtained depends on the reaction time.     

Efficient synthesis of fumaric amides through cross-metathesis of acrylic amides with the NHC Grubbs ruthenium catalyst

Application of the second generation Grubbs metathesis catalyst for the homo-cross-metathesis of acroyl amides from chiral amines is reported. This efficient and high-yielding reaction provides a side-product free synthesis of fumaric acid diamides which are formed with complete (E)-selectivity under the reaction conditions. In particular, products which cannot be synthesized from the corresponding fumaroyl chloride via classic condensation route can now be provided in excellent yields (88–98%) with a catalyst loading from 2.5 mol% to even 0.375 mol%.     

Zinc Powder Catalysed Formylation and Urealation of Amines Using CO2 as a C1 Building Block†

Transformation of CO₂ into valuable organic compounds catalysed by cheap and biocompatible metal catalysts is one of important topics of current organic synthesis and catalysis. Herein, we report the zinc powder catalysed formylation and urealation of amines with CO₂ and (EtO)₃SiH under solvent free condition. Using 2 mol% zinc powder as the catalyst, a series of secondary amines, both the aromatic ones and the aliphatic ones, can be formylated into formamides. When primary aromatic amines were used as the substrates, the reactions produce urea derivatives. The electronic and steric effects from the substrates on the formylation and urealation reactions were observed and discussed. The recovery and reusability of zinc powder were investigated, showing the zinc powder can be reused in the formylation reaction without loss of catalytic activity. The analysis on the reactants/products mixture after filtering out the zinc powder showed the zinc concentration in the mixture is low to 1 ppm. The pathways for the formylation and urealation of amines with this catalytic system were also investigated, and related to the different substrates.     

An efficient reduction of N-substituted carbonylimidazolides into formamides by NaBH4

A novel, simple and versatile protocol was investigated for highly efficient synthesis of formamides through reducing N-substituted carbonylimidazolides by NaBH₄ under mild reaction conditions. By this method, not only carboxylic acids or isocyanates, but also amines can readily access formamides with high yields.     

A novel layered organic polymer-inorganic hybrid zinc poly (styrene-phenylvinylphosphonate)-phosphate immobilized chiral salen Mn(III) catalyst large-scale asymmetric epoxidation of unfunctionalized olefins

A novel layered organic polymer-inorganic hybrid zinc poly (styrene-phenylvinylphosphonate)-phosphate (ZnPS-PVPA) has been synthesized under mild conditions and diphenol-modified ZnPS-PVPA was used to successfully immobilize the chiral salen Mn(III) by axial coordination. The obtained heterogeneous chiral catalysts exhibited excellent activities and enantioselectivities using sodium periodate as an oxidant for asymmetric epoxidation of unfunctionalized olefins, especially for the epoxidation of α-methylstyrene (conversion: up to 97%; ee: exceed 99%). Moreover, these synthesized catalysts were relatively stable and could be expediently separated from the reaction system, and could be recycled at least ten times without obvious loss of activity and enantioselectivity. These novel catalysts could be efficiently used in large-scale reactions with the enantioselectivity being maintained at the same level, which offer a great possibility for application in industry.     

Ultrasound promoted three-component synthesis of dihydroindeno[1,2-b]pyrrole derivatives

In this work, a one-pot three-component reaction of ninhydrin, primary amines, and 1,3-dicarbonyl compounds was investigated under various conditions to synthesis of diverse derivatives of dihydroindeno[1,2-b]pyrroles. Catalyst-free conditions in EtOH under ultrasound irradiation (45% of amplitude) were selected as a novel and efficient method for synthesis of these fused structures. The reactivity of different primary amines was then investigated for steric and electronic effects. Two examples of difunctional structures were also synthesized by using of 1,4-diaminobenzene under optimum conditions with high yields. The structure of all products was characterized by spectroscopic methods and elemental analysis.     

Synthesis and aminolysis of polysaccharide carbonates

Well soluble dextran-, cellulose-, starch-, and pullulan aryl carbonates were synthesized applying p-NO₂-phenyl chloroformate, phenyl chloroformate, and phenyl fluoroformate. Aminolysis of the products obtained, using aliphatic amines or benzyl amines, yield novel soluble polysaccharide carbamates. The influence of the reaction conditions on the reaction efficiency depending on polysaccharide, reagent, and reaction parameters including temperature was studied. Thus a synthesis strategy was developed for the easy and efficient design of structures of polysaccharide-based materials. The products were characterized by means of NMR-, UV-Vis- and FTIR spectroscopy, elemental analysis, and size exclusion chromatography.     

N,N′,N″-Tri-Boc-guanidine (TBG): a common starting material for both N-alkyl guanidines and amidinoureas

In this Letter, we describe the unexpected reaction pattern of N,N′N″-tri-Boc-guanidine (TBG) with amines at room temperature and under reflux conditions affording N-substituted guanidines and amidinoureas, potentially important compounds with extensive applications in medicinal chemistry. This investigation shows that TBG is an excellent, readily available common starting material for the synthesis of various N-alkyl guanidines as well as N-alkyl-N′-substituted amidinoureas by simply manipulating the reaction conditions.     

Solvent-free synthesis of β-enamino ketones and esters catalysed by recyclable iron(III) triflate

A novel application of highly stable Fe(OTf)₃ as an efficient catalyst for the synthesis of a variety of β-enamino ketones and esters under solvent-free conditions is described. Notably, this protocol of a “green synthesis”, which produced β-enamino ketones and esters by the reaction of a variety of β-dicarbonyl compounds and primary amines, exhibits attractive properties including high yields, short reaction periods, lower loading of catalyst and chemo- and regio-selectivity. In addition, the catalyst was easily recovered from the reaction system and readily reused with minimal loss of activity.     

Practical synthesis of S-alkyl thiocarbamate herbicides by carbonylation of amines with carbon monoxide and sulfur

An industrial and economic carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamate herbicides. In the presence of potassium carbonate and solvent DMSO, S-alkyl thiocarbamates, such as thiobencarb and orbencarb (herbicides) are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20 °C).     

Traceless solid-phase synthesis of 2,4,6-chlorodiamino and triaminopyrimidines

An effective traceless solid-phase synthesis of chloro-diaminopyrimidines via an amino-de-chlorination reaction of polymer-bound 4-alkoxycarbonylamino-2,6-dichloropyrimidines has been developed. After release from the polymer the target molecules were obtained in good to excellent purity, although with modest regiocontrol. Further reaction of solid-supported N-alkoxycarbonyl-chloro-diaminopyrimidines with secondary amines afforded triaminopyrimidines in good purity under mild conditions, whereas less nucleophilic primary amines did not perform well under the conditions explored so far.     

Syntheses of substituted 3-methyleneisoindolin-1-ones by a palladium-catalyzed Sonogashira coupling-carbonylation-hydroamination sequence in phosphonium salt-based ionic liquids

Two efficient approaches for the synthesis of isoindolin-1-one derivatives in phosphonium salt ionic liquids are described. The palladium-catalyzed carbonylation-hydroamination reaction of 1-halo-2-alkynylbenzene with amines afforded the substituted 3-methyleneisoindolin-1-ones in good yields and high selectivities in favor of the Z-isomers. The target molecules could also be synthesized by the Sonogashira coupling-carbonylation-hydroamination one-pot reaction of dihalides, alkynes, and amines. Both processes can be conducted under mild conditions and tolerate a wide array of functionalized substrates.