In situ synthesis of crosslinked-polyaniline nano-pillar arrays/reduced graphene oxide nanocomposites for supercapacitors

Crosslinked-polyaniline (CPA) nano-pillar arrays adsorbed on the surface of reduced graphene oxide (RGO) sheets were synthesized by in situ solution polymerization through two steps of reduction. The electrochemical analyses demonstrated that the befittingly reduced CPA/RGO composite exhibited high performance as electrode materials for supercapacitors. The CPA/RGO composite showed very high specific capacitance of 1532 F g^?1 at a scan rate of 10 mV s^?1 or 694 F g^?1 at a current density of 2 A g^?1 in 1 M H₂SO₄ electrolyte, as well as great energy density of 61.4 W h kg^?1 at a current density of 2 A g^?1. The electrode material also had decent power density of 4 kW kg^?1 at a current density of 10 A g^?1, and good cycling stability of 92.5 % capacitance retained after 500 cycles of cyclic voltammetry at 500 mV s^?1. The neat microstructures and super electrochemical properties suggest the potential use of the composites in supercapacitors.     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Synthesis of micro- and mesoporous carbon spheres for supercapacitor electrode

Micro- and mesoporous carbon spheres (MMCSs) are synthesized by the polymerization of colloidal silica-entrapped resorcinol/formaldehyde in the presence of ammonia as catalyst, followed by carbonization, sodium hydroxide (NaOH) etching to remove silica template, and potassium hydroxide (KOH) activation. The morphology and microstructure are characterized by scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption. The results show that a typical sample (denoted as MMCS-3) unites the characteristics of regular spherical shape (uniform diameters of 500 nm), high specific surface area (1,620 m² g^?1), large pore volume (1.037 cm³ g^?1), and combined micropores and mesopores (11.0 nm), which endows MMCS-3 good electrochemical performance. MMCS-3 as supercapacitor electrode shows a specific capacitance of 314 F g^?1 under a current density of 0.5 A g^?1 and low internal resistance of 0.2 Ω in 6 M KOH aqueous solution. The electrochemical capacitance still retains 198 F g^?1 at a high current density of 10 A g^?1. After 500 cycle numbers of galvanostatic charge/discharge at 0.5 A g^?1, MMCS-3 electrode still remains the specific capacitance of 301 F g^?1 with the retention of 96 %. This study highlights the potential of well-designed MMCSs as electrodes for widespread supercapacitor applications.     

From nickel oxalate dihydrate microcubes to NiS<Subscript>2</Subscript> nanocubes for high performance supercapacitors

In this study, NiS₂ nanocubes were successfully synthesized by a novel facile solvothermal method using NiC₂O₄·2H₂O microstructures and used as an electrode for high-performance supercapacitors. The electrochemical properties of the prepared NiS₂ electrode were studied using galvanostatic charge–discharge analysis, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) studies. Its maximum specific capacitance was 2077 F g^?1 at a constant current density of about 0.65 A g^?1. Further, the EIS results confirmed the pseudocapacitive nature of the NiS₂ electrode. The experimental results suggested that the NiS₂ electro-active material demonstrates excellent electrochemical performance with high specific capacitance, low resistance, and excellent cycling stability.     

Electrochemical exfoliation and in situ carboxylic functionalization of graphite in non-fluoro ionic liquid for supercapacitor application

Simultaneous electrochemical generation and functionalization of nano-sized graphite from graphite had been carried out in a non-fluoroanion-based ionic liquid, namely, triethylmethylammonium methylsulfate (TEMAMS) containing water and acetonitrile (AN) in different weight ratios. The oxygen-based functional groups attached with the exfoliated material had been identified using Fourier transform infrared spectroscopy (FTIR), and morphological changes were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). A symmetrical supercapacitor was fabricated using the exfoliated nano-sized graphite, and the influence of surface functionalities on its performance was investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic charge–discharge cycles (CC). The highest specific capacitance (C _sp) value of 140 F g^?1 at 0.25 A g^?1 was obtained in 1.0 M H₂SO₄, followed by aqueous TEMAMS (125 F g^?1), TEMAMS/acetonitrile (115 F g^?1), and TEMAMS (106 F g^?1) at 0.10 A g^?1.     

A tunable hierarchical porous carbon from starch pretreated by calcium acetate for high performance supercapacitors

Hierarchical porous carbons (HPCs) with abundant mesopores have been prepared by a facile route from the starch that was pretreated by calcium acetate. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and N₂ adsorption–desorption tests show that hierarchical porous carbons with bimodal mesopores have been obtained. Moreover, the pore sizes are tunable by simply adjusting the reactants ratio and carbonization temperature. The as-synthesized hierarchical porous carbon materials (HPCs-2-800) possesses the highest Brunauer-Emmett-Teller (BET)-specific surface area of 464 m² g^?1 and mesoporous volume of 0.663 cm³ g^?1 at the carbonization temperature of 800 °C and starch to calcium acetate mass ratio of 2. Electrochemical measurements also display that the HPCs-2-800 electrodes have a high reversible capacity of 244 F g^?1 at the current density of 0.1 A g^?1 and 182 F g^?1 at the current density of 10 A g^?1. When the current density is elevated from 0.1 to 10 A g^?1, the high capacitance retention of 74.6 % reveals a good rate performance. Long charge–discharge cycling measurements disclose good stabilities over 25,000 cycles at different current densities of 1–10 A g^?1 (5000 cycles at each current density) for HPCs-2-800 electrode. The cycling results indicate a high capacitance retention of 99.6 % over 5000 charge–discharge cycles even at the current density of 10 A g^?1. The excellent supercapacitive performances imply that HPCs-2-800 is a promising candidate for supercapacitors.     

Facile controlled synthesis of MnO2 nanowires for supercapacitors

In this report, a simple and facile method was developed for preparation of MnO₂ nanowires by calcinations of MnOOH nanowires previously synthesized under hydrothermal conditions, using hexamethylenetetramine as a reducing agent, without any template. The as-prepared MnO₂ nanowires displayed an enhanced specific capacitance (262.7 F g^?1) and good cycling stability (e.g., no loss within 1,500 cycles), showing good electrochemical performances as electrode material for supercapacitors.     

Co-electrodeposition of MnO2/graphene oxide coating on carbon paper from phosphate buffer and the capacitive properties

MnO₂/graphene oxide sheet composite (MnO₂/GOS) has been co-electrodeposited on the thermally treated carbon paper (TTCP) in phosphate buffer solution containing GOS and KMnO₄. The resulted samples have been characterized by scanning and transmission electron microscopy, Raman, X-ray diffraction, and X-ray photoelectron energy spectroscopy. The results show that the synthesized MnO₂ may be δ-MnO₂ and the morphology of MnO₂/GOS is very different from that of MnO₂, indicating that the introduction of GOS in electrolyte can influence the morphology during the deposition. The capacitive properties of the samples are investigated by using cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. The specific capacitance of MnO₂ for MnO₂/GOS can reach about 829 F g^?1 at discharged current density of 1.0 A g^?1 in 1 M Na₂SO₄ aqueous solution, which is larger than that of MnO₂ deposited on TTCP. The composite of MnO₂/GOS also exhibits excellent cyclic stability with a decrease of 18.5 % specific capacitance after 1,500 cycles.     

Hierarchical nanocomposites of polyaniline scales coated on graphene oxide sheets for enhanced supercapacitors

The homogeneous polyaniline–graphene oxide (PANI-GO) nanocomposites were facilely assembled with a redox system in which cumene hydroperoxide (CHP) and iron dichloride (FeCl₂) acted as oxidant and reductant, respectively. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that PANI scales coated uniformly on the surface of GO sheets owing to the synergistic effect between the PANI and GO. The obtained PANI-GO nanocomposites exhibited improved electrochemical performance as an electrode material for supercapacitors compared with the pure PANI. The specific capacitance of the PANI-GO nanocomposites was high up to 308.3 F g^?1, much higher than that of the pure PANI with specific capacitance of 150 F g^?1 at a current density of 1 A g^?1 in 2 M H₂SO₄ electrolyte. The Raman and XPS results illustrated that enhanced electrochemical performance might be attributed to the π-π conjugation between the PANI and GO sheets.     

Thiourea aldehyde resin-based carbon/graphene composites for high-performance supercapacitors

Thiourea aldehyde resin-based heteroatom doping carbon and graphene composites (RHDC/GN) were prepared by an in situ polymerization and carbonization. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that thiourea aldehyde resin deposited on lamellar GO flakes during the polymerization and RHDC/GN composites had a hierarchical structure. The specific capacitance of the RHDC/GN composites was high up to 355 F g^?1, much higher than that of the pure thiourea aldehyde resin-based heteroatom doping carbon (RHDC) with specific capacitance of 135 F g^?1 at a current density of 1.0 A g^?1 in 6-M KOH electrolyte. And the hetroatoms in RHDC/GN composites increase the specific capacitance, and GN enhances the conductivity of the electrodes which is beneficial to improving electrochemical cycling stability of the electrode significantly. The specific capacitance retains 90.97% after 5000 charge-discharge processes at 10 A g^?1, which provides potential as supercapacitors.     

Pomegranate rind-derived activated carbon as electrode material for high-performance supercapacitors

In this paper, activated carbon materials were synthesized from pomegranate rind through carbonization and alkaline activation processes. The effects of pyrolytic temperature on the textual properties and electrochemical performance were investigated. The surface area of the activated carbon can reach at least 2200 m² g^?1 at different pyrolytic temperatures. It was found that, at the range of 600–900 °C, decreasing the carbonization temperature leads to the increase of t-plot micropore area, t-plot micropore volume, and capacitance. Further decreasing the carbonization temperature to 500 °C also leads to the increase of t-plot micropore area and t-plot micropore volume, but the capacitance is slightly poorer. The activated carbon carbonized at 600 °C and activated at 800 °C possesses very high specific area (2931 m² g^?1) and exhibits very high capacitance (～268 F g^?1 at 0.1 A g^?1 and ～242 F g^?1 at 1 A g^?1). There is no capacitance fading after 2000th cycle.     

Ultrasonic-assisted synthesis of magnetite/carbon nanocomposite for electrochemical supercapacitor

Iron oxides are considered as the promising pseudocapacitive materials for high-performance supercapacitors due to their high theoretical specific capacitance, low cost, environmental benignity, and natural abundance. In this work, we study capacitive behavior of different magnetite (Fe₃O₄) nanoparticles/carbon black (CB) composites ratios. These composites are synthesized by the coprecipitation method in the presence of ultrasonic waves. The structural and morphological characteristics of the magnetite/CB composites are investigated by X-ray diffraction and scanning electron microscopy, respectively. The electrochemical performance of magnetite/CB composite electrodes is tested by cyclic voltammetry and galvanostatic charge/discharge in a Na₂SO₄ electrolyte. The results indicate that the magnetite/CB electrodes show typical pseudo-capacitive behavior in Na₂SO₄ solution. Moreover, in comparison to the pure Fe₃O₄ (37 F g^?1) and carbon black (23 F g^?1), the as-prepared 45 % magnetite/CB nanocomposite electrode shows a higher specific capacitance (300 F g^?1). Additionally, the supercapacitor device of the magnetite/CB nanocomposite exhibits excellent long cycle life along with 98.5 % specific capacitance retained after 10,000 cycle tests.     

Enhanced electrochemical performance of nano-MnO2 modified by Ni(OH)2 as electrode material for supercapacitor

Ni(OH)₂ was compounded to MnO₂ in an easy liquid phase process to improve the diffusion process of the electrode. The as-prepared materials were a mixture of amorphous and nanocrystalline with aggregated nanoparticles forming slit-shaped pore structures. The composite has higher specific surface area and smaller pore volume compared with pristine MnO₂. Electrochemical properties of the electrodes were carried out with cyclic voltammetry (CV), galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy (EIS). The MnO₂/Ni(OH)₂ composites exhibited enhanced electrochemical properties than that of pristine MnO₂. Remarkably, the composite which contains 3 % Ni(OH)₂ exerted the best discharged specific of 408 F g^?1 under 0.2 A g^?1, much higher than 247 F g^?1 of pristine MnO₂ at the same current density. Better rate capability and cycling stability were also realized by the same composite in comparison.     

Design of high-performance core-shell hollow carbon nanofiber@nickel-cobalt double hydroxide composites for supercapacitive energy storage

The supercapacitive performances of supercapacitor mainly depend on the physical nanostructure and micro-morphology of electrode materials. Here, we demonstrated the design, synthesis and electrochemical performances of core-shell hollow carbon nanofiber@nickel-cobalt-layered double hydroxide (HCNF@ Ni_0.67Co_0.33-LDH) nanocomposites with an optimized Ni/Co molar ratio of 2:1. The HCNF was used as superiorly conductive core to sustain the nanoporous silky Ni_0.67Co_0.33-LDH shell, which can efficiently provide fast transport pathways for electrons and electrolyte ions. The outstanding specific capacitance of 2486 F g^?1 at 1 A g^?1 based on galvanostatic charge-discharge curves were acquired for the highly electroactive HCNF@Ni_0.67Co_0.33-LDH. Furthermore, the HCNF@Ni_0.67Co_0.33-LDH electrode delivered a distinguished rate capability with a specific capacitance of 1890 F g^?1 even at 15 A g^?1. Notably, an asymmetric supercapacitor with HCNF@Ni_0.67Co_0.33-LDH as cathode and HCNF as anode was devised, which presented a prominent specific capacitance of 228 F g^?1, good energy density of 62.1 Wh kg^?1, and impressive cycling stability (90.6% capacitance retention after 10,000 cycles).     

Fabrication and the electrochemical activation of network-like MnO<Subscript>2</Subscript> nanoflakes as a flexible and large-area supercapacitor electrode

Porous network-like MnO₂ thick films are successfully synthesized on a flexible stainless steel (SS) mesh using a simple and low-cost electrodeposition method followed by an electrochemical activation process. Morphology, chemical composition, and crystal structure of the prepared electrodes before and after the activation process are determined and compared by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses. The results show that the implementation of the electrochemical activation process does not change the chemical composition and crystal structure of the films, but it influences the surface morphology of the MnO₂ thick layer to a flaky nanostructure. Based on the electrochemical data analysis, the maximum specific capacitance of 1400 mF (381 F g^?1) and 3700 mF (352 F g^?1) are measured for small (2.6 cm²) and large (10 cm²) surface area electrodes, respectively. In addition, a flexible symmetric MnO₂//MnO₂ solid-state supercapacitor shows a capacitance of 0.3 F with about 98% retention at different bending angles from 0 to 360°.     

KOH direct treatment of kombucha and in situ activation to prepare hierarchical porous carbon for high-performance supercapacitor electrodes

Kombucha, a renewable biomass, has been successfully utilized as an accessible carbon source to fabricate kombucha-derived hierarchical porous carbon (KHPC) by KOH direct treatment and in situ activation. The prepared KHPC shows an interconnected hierarchical porous structure, a pore volume of 0.41 cm³ g^?1, and a specific surface area of 917 m² g^?1. Due to the multiple synergistic effects of these advantages, the KHPC-3 exhibits a high specific capacitance of 326 F g^?1 at a current density of 1 A g^?1 in 6 M KOH, good rate capability of 82% retention from 1 to 20 A g^?1, and cycling performance with 91.3% retention over 5000 cycles. Moreover, the KHPC-3 symmetric supercapacitor reveals a good energy density of 20.97 Wh kg^?1 at a power density of 871.2 W kg^?1 and retains 8.08 Wh kg^?1 at 6330 W kg^?1 in 1 M Na₂SO₄ electrolyte. Therefore, the KHPC obtained via the simple synthesis process shows great promise as an electrode material in energy storage devices.     

Electrospun porous MnMoO<Subscript>4</Subscript> nanotubes as high-performance electrodes for asymmetric supercapacitors

MnMoO₄ nanotubes of diameter about 120 nm were successfully synthesized by a single-spinneret electrospinning technique followed by calcination in air, and their structural, morphological, and electrochemical properties were studied with the aim to fabricate high-performance supercapacitor devices. The obtained MnMoO₄ nanotubes display a 1D architecture with a porous structure and hollow interiors. Benefiting from intriguing structural features, the unique MnMoO₄ nanotube electrodes exhibit a high specific capacitance, excellent rate capability, and cycling stability. As an example, the tube-like MnMoO₄ delivers a specific capacitance of 620 F g^?1 at a current density of 1 A g^?1, and 460 F g^?1 even at a very high current density of 60 A g^?1. Remarkably, almost no decay in specific capacitance is found after continuous charge/discharge cycling for 10,000 cycles at 1 A g^?1. An asymmetric supercapacitor fabricated from this MnMoO₄ nanotubes and activated carbon displayed a maximum high energy density of 31.7 Wh kg^?1 and a power density of 797 W kg^?1, demonstrating a good prospect for practical applications in energy storage electronics.     

Facile preparation of nitrogen-doped porous carbon for high performance symmetric supercapacitor

In this work, the micromolecule l-glutamic acid (Glu) is employed as nitrogen-rich precursor to prepare a novel porous carbon, and ZnCl₂ is used as activating agent to improve the surface area and electrochemical performance of the carbon. The nitrogen content of the carbon (Glu-2.5) prepared by Glu and ZnCl₂ with a mass ratio of 1:2.5 retains as high as 7.1 % at an activation temperature of 700 °C. The surface area and pore volume of Glu-2.5 are 1007.4 m² g^?1 and 0.57 cm³ g^?1, respectively. Glu-2.5 exhibits a high specific capacitance of 330.6 F g^?1 in 2 M KOH electrolyte at the current density of 1 A g^?1and good cycling stability (89 % retention of capacitance after 5000 charge/discharge cycles). More importantly, the assembled symmetric supercapacitor using Glu-2.5 as electrodes reveals a high energy density (16.7 Wh kg^?1) under the power density of 404.7 W kg^?1. Owing to its inherent advantages, Glu-2.5 could be a promising and scalable alternative applied to energy storage/conversion.     

Enhanced electrochemical performance of straw-based porous carbon fibers for supercapacitor

The efficient utilization of natural biomass as renewable raw materials is of importance. We herein prepared porous carbon fibers (PCFs) by activation of the extracted cellulose microfibers from the agriculture byproduct of corn straw. Different from the porous carbons (PCs) by directly activating straw, the obtained PCFs had typical one-dimensional morphology with high surface area (2013 m² g^?1) and large pore volume (1.27 cm³ g^?1). The influence of the ZnCl₂/cellulose mass ratio on the electrochemical performance was studied, and the optimized PCF(1:1) possessed a much higher specific capacitance than the PC(1:1) sample, which was attributed to the improved specific surface area as well as the fiber-like morphology where it had short ion diffusion route and small interfacial resistance in comparison to PCs. PCFs have a high specific capacitance of 230 F g^?1 at 0.5 A g^?1, and 183 F g^?1 was retained at 20 A g^?1 (79.6%), revealing an excellent rate capability. The assembled symmetrical supercapacitor exhibited a wide potential window of 1.8 V, small electrochemical impedance, and superior cycle performance. Moreover, a high energy density of 16.0 Wh kg^?1 was obtained at a power density of 450.4 W kg^?1, which was preserved of 6.9 Wh kg^?1 at a high power density of 14,194.3 W kg^?1.     

Hybrid nanonet/nanoflake NiCo2O4 electrodes with an ultrahigh surface area for supercapacitors

An integrated electrode consisting of hybrid nanonet/nanoflake NiCo₂O₄ grown on stainless steel mesh substrates exhibits a high specific capacitance while maintaining high-rate capability and good cycling stability. The specific capacitance reaches a maximum of 911 F g^?1 at a current density of 10 A g^?1, which can still retain 864 F g^?1 (94.8 % retention) after 10,000 cycles. These much-improved electrochemical performances are attributed to the unique architecture of NiCo₂O₄ electrode. The interconnected nanonet NiCo₂O₄ with an ultrahigh surface area significantly facilitates the rapid ion/electron transport and guarantees good mechanical adhesion, while the ultrathin nanoflakes further extend the active sites for fast redox reactions for efficient energy storage. Figure

Hybrid nanonet/nanoflake NiCo₂O₄ grown on stainless steel mesh exhibits superior capacitive performance and long-life stability as an integrated electrode for high-performance supercapacitors.