Surface-dependent, ligand-mediated photochemical etching of CdSe nanoplatelets

Photochemical etching of CdSe nanoplatelets was studied to establish a relationship between the nanocrystal surface and the photochemical activity of an exciton. Nanoplatelets were synthesized in a mixture of octylamine and oleylamine for the wurtzite (W) lattice or in octadecene containing oleic acid for the zinc-blende (ZB) lattice. For photochemical etching, nanoplatelets were dispersed in chloroform containing oleylamine and tributylphosphine in the absence or presence of oleic acid and then irradiated with light at the band-edge absorption maxima. Etching phenomena were characterized using UV-vis absorption spectroscopy and transmission electron microscopy. The absorption spectra of both W and ZB CdSe nanoplatelets showed that the exciton was confined in one dimension along the thickness. However, the two nanoplatelets presented different etching kinetics and erosion patterns. The rate of etching for W CdSe nanoplatelets was much faster than that for ZB nanoplatelets. Small holes were uniformly perforated on the planar surface of W nanoplatelets, whereas the corners and edges of ZB nanoplatelets were massively eroded without a significant perforation on the planar surface. This suggests that the amine-passivated surface of trivalent cadmium atoms on CdSe nanoplatelets is photochemically active, but the carboxylate-passivated surface of divalent cadmium atoms is not. Hence, the ligand, which induces the growth of W or ZB CdSe nanoplatelets, mediates the surface-dependent photochemical etching. This result implies that an electron-hole pair can be extracted from the planar surface of amine-passivated W nanoplatelets but from the corners and edges of carboxylate-passivated ZB nanoplatelets.     

Constraints in post-synthesis ligand exchange for hybrid organic (MEH-PPV)–inorganic (CdSe) nanocomposites

For an optimum charge/energy transfer performance of hybrid organic–inorganic colloidal nanocrystals for applications such as photonic devices and solar cells, the determining factors are the distance between the nanocrystal and polymer which greatly depends upon nanocrystal size/nanocrystal ligands. Short chain ligands are preferred to ensure a close contact between the donor and acceptor as a result of the tunnelling probability of the charges and the insulating nature of long alkyl chain molecules. Short distances increase the probability for tunnelling to occur as compared to long distances induced by long alkyl chains of bulky ligands which inhibit tunnelling altogether. The ligands on the as-synthesized nanocrystals can be exchanged for various other ligands to achieve desirable charge/energy transfer properties depending on the bond strength of the ligand on the nanocrystal compared to the replacement ligand. In this work, the constraints involved in post-synthesis ligand exchange process have been evaluated, and these factors have been tuned via wet chemistry to tailor the hybrid material properties via appropriate selection of the nanocrystal capping ligands. It has been found that both oleic acid and oleylamine (OLA)-capped cadmium selenide (CdSe) quantum dots (QDs) as compared with trioctylphosphine oxide (TOPO)-passivated CdSe QDs are of high quality, and they provide better steric stability against coagulation, homogeneity, and photostability to their respective polymer:CdSe nanocomposites. CdSe QDs particularly with OLA capping have relatively smaller surface energies, and thus, lesser quenching capabilities show dominance of photoinduced Forster energy transfer between donors (polymer) and acceptors (CdSe nanocrystals) as compared to charge transfer mechanism as observed in polymer:CdSe (TOPO) composites. It is conjectured that size quantization effects, stereochemical compatibility of ligands (TOPO, oleic acid, and oleyl amine), and polymer MEH-PPV stability greatly influence the photophysics and photochemistry of hybrid polymer–semiconductor nanocomposites.     

Continuous transition from 3D to 1D confinement observed during the formation of CdSe nanoplatelets

We study the formation of colloidal CdSe nanoplatelets using both tansmission electron microscopy (TEM) and spectroscopic analysis. We show that the platelets form by continuous lateral extension of small (<2 nm) nanocrystal CdSe seeds. The nanoplatelet thickness is fixed by the seed dimension and remains constant during the platelet formation. The nanoplatelet lateral dimensions can be tuned using additional precursor injection. Absorption and fluorescence analysis of the CdSe nanoplatelets as they continuously extend laterally confirms a continuous transition from 3D to 1D confined nanoparticles. The formation of the CdSe platelets is found to be similar for different platelet thicknesses that we control with a precision of one CdSe monolayer.     

CdSe Quantum Dots and N719‐Dye Decorated Hierarchical TiO2 Nanorods for the Construction of Efficient Co‐Sensitized Solar Cells

Three‐dimensional hierarchical TiO₂ nanorods (HTNs) decorated with the N719 dye and 3‐mercaptopropionic or oleic acid capped CdSe quantum dots (QDs) in photoanodes for the construction of TiO₂ nanorod‐based efficient co‐sensitized solar cells are reported. These HTN co‐sensitized solar cells showed a maximum power‐conversion efficiency of 3.93 %, and a higher open‐circuit voltage and fill factor for the photoanode with 3‐mercaptopropionic acid capped CdSe QDs due to the strong electronic interactions between CdSe QDs, N719 dye and HTNs, and the superior light‐harvesting features of the HTNs. An electrochemical impedance analysis indicated that the superior charge‐collection efficiency and electron diffusion length of the CdSe QD‐coated HTNs improved the photovoltaic performance of these HTN co‐sensitized solar cells.     

Colloidal Synthesis of CH3NH3PbBr3 Nanoplatelets with Polarized Emission through Self‐Organization

We report a combined experimental and theoretical study of the synthesis of CH₃NH₃PbBr₃ nanoplatelets through self‐organization. Shape transformation from spherical nanodots to square or rectangular nanoplatelets can be achieved by keeping the preformed colloidal nanocrystals at a high concentration (3.5 mg mL⁻¹) for 3 days, or combining the synthesis of nanodots with self‐organization. The average thickness of the resulting CH₃NH₃PbBr₃ nanoplatelets is similar to the size of the original nanoparticles, and we also noticed several nanoplatelets with circular or square holes, suggesting that the shape transformation experienced a self‐organization process through dipole–dipole interactions along with a realignment of dipolar vectors. Additionally, the CH₃NH₃PbBr₃ nanoplatelets exhibit excellent polarized emissions for stretched CH₃NH₃PbBr₃ nanoplatelets embedded in a polymer composite film, showing advantageous photoluminescence properties for display backlights.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

End‐to‐End Self‐Assembly of Semiconductor Nanorods in Water by Using an Amphiphilic Surface Design

One‐dimensional (1D) self‐assemblies of nanocrystals are of interest because of their vectorial and polymer‐like dynamic properties. Herein, we report a simple method to prepare elongated assemblies of semiconductor nanorods (NRs) through end‐to‐end self‐assembly. Short‐chained water‐soluble thiols were employed as surface ligands for CdSe NRs having a wurtzite crystal structure. The site‐specific capping of NRs with these ligands rendered the surface of the NRs amphiphilic. The amphiphilic CdSe NRs self‐assembled to form elongated wires by end‐to‐end attachment driven by the hydrophobic effect operating between uncapped NR ends. The end‐to‐end assembly technique was further applied to CdS NRs and CdSe tetrapods (TPs) with a wurtzite structure.     

Shape‐Tunable Colloids from Structured Liquid Droplet Templates

Shaping colloidal building units is of paramount importance for their self‐assembly into complex objects. Continuous tuning of colloidal shapes is highly desired for understanding self‐assembly, but it still remains a challenge. Herein, we report a new template strategy for the shape‐tunable synthesis of anisotropic colloids with shapes that can be continuously tuned from discs (oblate spheroids) to spheres to theta shapes to dumbbells. This was realized by creating structured shape‐tunable droplets from patchy colloidal discs and using these droplets as templates. In particular, we found that a controlled dumbbell‐to‐eyeball droplet transformation can be used for the synthesis of eyeball‐shaped colloids. We also demonstrated the droplet transformation pathways and applied the method to the synthesis of colloidal molecules. These colloids provide possibilities for exploring their ordered packing structures, and the method based on the use of structured droplets can be adapted for the synthesis of other functional colloidal particles.     

Hydrogel Microellipsoids that Form Robust String‐Like Assemblies at the Air/Water Interface

Soft colloidal particles such as hydrogel microspheres assemble at air/water or oil/water interfaces, where the soft colloids are highly deformed and their surface polymer chains are highly entangled with each other. Herein, we report the formation of robust one‐dimensional, string‐like colloidal assemblies through self‐organization of hydrogel microspheres with shape anisotropy at the air/water interface of sessile droplets. Shape‐anisotropic hydrogel microspheres were synthesized via two‐step polymerization, whereby a hydrogel shell was formed onto preformed rigid microellipsoids. The shape anisotropy of the hydrogel microspheres was confirmed by transmission electron microscopy and high‐speed atomic force microscopy as well as by light‐scattering measurements. The present findings are crucial for the understanding of natural self‐organization phenomena, where “softness” influences microscopic assembled structures such as those of Nostoc bacteria.     

Main‐Chain Linear Polyrotaxanes: Synthesis,Characterization, and Conformational Modulation

Two functional main‐chain linear polyrotaxanes, one a covalent polymeric chain that threads through many macrocycles ( P1 ) and the other a poly[n]rotaxane chain that is composed of many repeating rotaxane units ( P2 ), were synthesized by employing strong crown‐ether/ammonium‐based ( DB24C8 / DBA ) host–guest interactions and click chemistry. Energy transfer between the wheel and axle units in both polyrotaxanes was used to provide insight into the conformational information of their resulting polyrotaxanes. Steady‐state and time‐resolved spectroscopy were performed to understand the conformation differences between polymers P1 and P2 in solution. Additional investigations by using dynamic/static light scattering and atomic force microscopy illustrated that polymer P1 was unbending and had a rigid rod‐like structure, whilst polymer P2 was curved and flexible. This flexible topology facilitated the self‐assembly of polymer P2 into relatively large ball‐shaped particles. In addition, the energy transfer between the wheel and axle units was controlled by the addition of specific anions or base. The anion‐induced energy enhancement was attributed to a change in electrostatic interactions between the polymer chains. The base‐driven molecular shuttle broke the DB24C8 / DBA host–guest interactions. These results confirm that both intra‐ and intermolecular electrostatic interactions are crucial for modulating conformational topology, which determines the assembly of polyrotaxanes in solution.     

Gradient polymer networks formed by photopolymerization with self‐floating polysiloxane‐containing nanogel

Polysiloxane‐containing nanogels can be used as a fast, convenient and environmentally friendly method to control gradient photopolymerization and to obtain gradient polymer network because of its self‐floating feature. The chain length of polysiloxane is a key factor that influences the self‐floating capability of the polysiloxane‐containing nanogel. This paper reports a series of nanogels compositions synthesized with methacrylate‐modified polysiloxanes with different chain lengths, urethane dimethacrylate (UDMA) and isobornyl methacrylate (IBMA) at a molar ratio of 10:20:70 in the presence of a thiol chain transfer agent. The effect of polysiloxane chain length on self‐floating capability of the nanogel and gradient polymer network was researched. The results show that polysiloxane chain length is the main driving force for the self‐floating capability of the nanogels. The nanogel with long polysiloxane chain length exhibits good self‐floating capability in the monomer–polymer matrix because of the lower surface tension of polysiloxane. Furthermore, the gradient polymer network containing the nanogel with long polysiloxane chain length presents lower dispersion surface energy and greater hardness and thermostability. Copyright © 2016 John Wiley & Sons, Ltd.     

Phenylboronate‐diol crosslinked polymer/SWCNT hybrid gels with reversible sol–gel transition

This work demonstrates the successful incorporation of functionalized single‐walled carbon nanotubes (f‐SWCNTs) into the phenylboronate‐diol crosslinked polymer gel to create a hybrid system with reversible sol–gel transition. The phenylboronic acid‐containing and diol‐containing polymers were first separately prepared by the reversible addition–fragmentation chain transfer polymerization. Covalent functionalization of single‐walled carbon nanotubes (SWCNTs) with an azide‐derivatized, diol‐containing polymer was then accomplished by a nitrene addition reaction. Subsequently, the hybrid gels were prepared by crosslinking the mixture of f‐SWCNTs and diol‐containing polymer with the phenylboronic acid‐containing polymer. The hybrid gel has been characterized by scanning electron microscopy (SEM) and rheological analysis. The SEM measurement demonstrated a homogeneous dispersion of f‐SWCNTs within the gel matrices. Rheological experiments also demonstrated that the hybrid gel exhibited storage moduli significantly higher than those of the native gel obtained from the phenylboronic acid‐containing and diol‐containing polymers. The hybrid gel can be switched into their starting polymer (f‐SWCNTs) solutions by adjusting the pH of the system. Moreover, the hybrid gel revealed a self‐healing property that occurred autonomously without any outside intervention. By employing this dynamic character, it is possible to regenerate the used gel, and thus, it has the potential to perform in a range of dynamic or bioresponsive applications Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and self‐assembly of multiple‐responsive magnetic nanogels

In this paper, temperature and pH‐sensitive interpenetrating polymer network (IPN) nanogels (NGs) were firstly prepared, and magnetic hybrid NGs were made through in‐situ precipitation of Fe²⁺ and Fe³⁺ into the IPN NGs. Under the optimized condition, the resulting hybrid NG dispersion with up to 17.3 wt% magnetite was stable, while the size distribution of the NGs is broad due to the formation of Fe₃O₄ nanoparticles outside the NGs. In order to synthesize relatively uniform magnetic NGs, magnetite content was reduced to 8.1 wt% magnetite. The NGs with 8.1 wt% magnetite can quickly self‐assemble into colloidal crystals induced by magnet, while such NGs slowly self‐assembled into colloidal crystals without external magnetic field. Furthermore, the reflection wavelength of the self‐assembled magnetic NGs showed red‐shift with increasing pH and temperature.     

Harnessing Colloidal Crack Formation by Flow‐Enabled Self‐Assembly

Self‐assembly of nanomaterials to yield a wide diversity of high‐order structures, materials, and devices promises new opportunities for various technological applications. Herein, we report that crack formation can be effectively harnessed by elaborately restricting the drying of colloidal suspension using a flow‐enabled self‐assembly (FESA) strategy to yield large‐area periodic cracks (i.e., microchannels) with tunable spacing. These uniform microchannels can be utilized as a template to guide the assembly of Au nanoparticles, forming intriguing nanoparticle threads. This strategy is simple and convenient. As such, it opens the possibility for large‐scale manufacturing of crack‐based or crack‐derived assemblies and materials for use in optics, electronics, optoelectronics, photonics, magnetic device, nanotechnology, and biotechnology.     

Long-lived Single Excitons,Trions, and Biexcitons in CdSe/CdTe Type-Ⅱ Colloidal Quantum Wells

Light-harvesters with long-lived excited states are desired for efficient solar energy conversion systems. Many solar-to-fuel conversion reactions, such as H₂ evolution and CO₂ reduction, require multiple sequential electron transfer processes, which leads to a complicated situation that excited states involves not only excitons (electron-hole pairs) but also multi-excitons and charged excitons. While long-lived excitons can be obtained in various systems (e.g., semiconductor nanocrystals), multi-excitons and charged excitons are typically shorted-lived due to nonradiative Auger recombination pathways whereby the recombination energy of an exciton is quickly transferred to the third carrier on a few to hundreds of picoseconds timescale. In this work, we report a study of excitons, trions (an exciton plus an additional charge), and biexcitons in CdSe/CdTe colloidal quantum wells or nanoplatelets. The typeⅡ band alignment effectively separates electrons and holes in space, leading to a single exciton lifetime of 340 ns which is ~2 order of magnitudes longer than that in plane CdSe nanoplatelets. More importantly, the electron-hole separation also dramatically slows down Auger decay, giving rise to a trion lifetime of 70 ns and a biexciton lifetime of 11 ns, among the longest values ever reported for colloidal nanocrystals. The long-lived exciton, trion, and biexciton states, combined with the intrinsically strong light-absorption capability of two-dimensional systems, enable the CdSe/CdTe type-Ⅱ nanoplatelets as promising light harvesters for efficient solar-to-fuel conversion reactions.     

Strategy for Good Dispersion of Well‐Defined Tetrapods in Semiconducting Polymer Matrices

The morphology or dispersion control in inorganic/organic hybrid systems is studied, which consist of monodisperse CdSe tetrapods (TPs) with grafted semiconducting block copolymers with excess polymers of the same type. Tetrapod arm‐length and amount of polymer loading are varied in order to find the ideal morphology for hybrid solar cells. Additionally, polymers without anchor groups are mixed with the TPs to study the effect of such anchor groups on the hybrid morphology. A numerical model is developed and Monte Carlo simulations to study the basis of compatibility or dispersibility of TPs in polymer matrices are performed. The simulations show that bare TPs tend to form clusters in the matrix of excess polymers. The clustering is significantly reduced after grafting polymer chains to the TPs, which is confirmed experimentally. Transmission electron microscopy reveals that the block copolymer‐TP mixtures (“hybrids”) show much better film qualities and TP distributions within the films when compared with the homopolymer‐TP mixtures (“blends”), representing massive aggregations and cracks in the films. This grafting‐to approach for the modification of TPs significantly improves the dispersion of the TPs in matrices of “excess” polymers up to the arm length of 100 nm.     

Lamellar assembly of cadmium selenide nanoclusters into quantum belts

Here, we elucidate a double-lamellar-template pathway for the formation of CdSe quantum belts. The lamellar templates form initially by dissolution of the CdX(2) precursors in the n-octylamine solvent. Exposure of the precursor templates to selenourea at room temperature ultimately affords (CdSe)(13) nanoclusters entrained within the double-lamellar templates. Upon heating, the nanoclusters are transformed to CdSe quantum belts having widths, lengths, and thicknesses that are predetermined by the dimensions within the templates. This template synthesis is responsible for the excellent optical properties exhibited by the quantum belts. We propose that the templated-growth pathway is responsible for the formation of the various flat, colloidal nanocrystals recently discovered, including nanoribbons, nanoplatelets, nanosheets, and nanodisks.     

Properties of acyl modified poly(glycerol‐adipate) comb‐like polymers and their self‐assembly into nanoparticles

There is an increasing need to develop bio‐compatible polymers with an increased range of different physicochemical properties. Poly(glycerol‐adipate) (PGA) is a biocompatible, biodegradable amphiphilic polyester routinely produced from divinyl adipate and unprotected glycerol by an enzymatic route, bearing a hydroxyl group that can be further functionalized. Polymers with an average Mn of ～13 kDa can be synthesized without any post‐polymerization deprotection reactions. Acylated polymers with fatty acid chain length of C₄, C₈, and C₁₈ (PGAB, PGAO, and PGAS, respectively) at different degrees of substitution were prepared. These modifications yield comb‐like polymers that modulate the amphiphilic characteristics of PGA. This novel class of biocompatible polymers has been characterized through various techniques such as FT‐IR, ¹H NMR, surface, thermal analysis, and their ability to self‐assemble into colloidal structures was evaluated by using DLS. The highly tunable properties of PGA reported herein demonstrate a biodegradable polymer platform, ideal for engineering solid dispersions, nanoemulsions, or nanoparticles for healthcare applications. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3267–3278     

Preparation of antistatic high‐density polyethylene composites based on synergistic effect of graphene nanoplatelets and multi‐walled carbon nanotubes

Graphene nanoplatelets are promising candidates for enhancing the electrical conductivity of composites. However, because of their poor dispersion, graphene nanoplatelets must be added in large amounts to achieve the desired electrical properties, but such large amounts limit the industrial application of graphene nanoplatelets. Multi‐walled carbon nanotubes also possess high electrical conductivity accompanied by poor dispersion. Therefore, a synergistic effect was generated between graphene nanoplatelets and multi‐walled carbon nanotubes and used for the first time to prepare antistatic materials with high‐density polyethylene via 1‐step melt blending. The synergistic effect makes it possible to significantly improve the electrical properties by adding a small amount of untreated graphene nanoplatelets and multi‐walled carbon nanotubes and increases the possibility of using graphene nanoplatelets in industrial applications. When only 1 wt% graphene nanoplatelets and 0.5 wt% multi‐walled carbon nanotubes were added, the surface and volume resistivity values of the composites were much lower than those of the composites that were only added 3 wt% graphene nanoplatelets. Additionally, as a result of the synergistic effect of graphene nanoplatelets and multi‐walled carbon nanotubes, the composites met the requirements for antistatic materials.     

Controlled synthesis and self-assembly of highly monodisperse Ag and Ag(2)S nanocrystals

A facile method to control the synthesis and self‐assembly of monodisperse Ag and Ag₂S nanocrystals with a narrow‐size distribution is described. Uniform Ag nanoparticles of less than 4 nm were obtained by thermolysis of Ag–oleate complexes in the presence of oleic acid and dodecylamine, and monodisperse Ag nanoparticles of less than 10 nm were also prepared in one step by using dodecylamine and oleic acid as capping agents. Moreover, the surface‐enhanced Raman scattering (SERS) properties of the Ag substrates have also been investigated. It is worth mentioning that these Ag nanoparticles and assemblies show great differences in the SERS activities of Rhodamine B dye. In addition, the superlattices of Ag₂S nanocrystals were synthesized with Ag–oleate complexes, alkanethiol, and sulfur as the reactants. The resulting highly monodisperse nanocrystals can easily self‐assemble into interesting superstructures in the solution phase without any additional assembly steps. This method may be extended to the size‐controlled preparation and assembly of many other noble‐metal and transition‐metal chalcogenide nanoparticles. These results will aid the study of the physicochemical properties of the superlattice assemblies and construction of functional macroscopic architectures or devices.